Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1#ifndef _LINUX_HDREG_H
2#define _LINUX_HDREG_H
3
4#ifdef __KERNEL__
5#include <linux/ata.h>
6
7/*
8 * This file contains some defines for the AT-hd-controller.
9 * Various sources.
10 */
11
12/* ide.c has its own port definitions in "ide.h" */
13
14#define HD_IRQ 14
15
16/* Hd controller regs. Ref: IBM AT Bios-listing */
17#define HD_DATA 0x1f0 /* _CTL when writing */
18#define HD_ERROR 0x1f1 /* see err-bits */
19#define HD_NSECTOR 0x1f2 /* nr of sectors to read/write */
20#define HD_SECTOR 0x1f3 /* starting sector */
21#define HD_LCYL 0x1f4 /* starting cylinder */
22#define HD_HCYL 0x1f5 /* high byte of starting cyl */
23#define HD_CURRENT 0x1f6 /* 101dhhhh , d=drive, hhhh=head */
24#define HD_STATUS 0x1f7 /* see status-bits */
25#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */
26#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */
27#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */
28
29#define HD_CMD 0x3f6 /* used for resets */
30#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */
31
32/* remainder is shared between hd.c, ide.c, ide-cd.c, and the hdparm utility */
33
34/* Bits of HD_STATUS */
35#define ERR_STAT 0x01
36#define INDEX_STAT 0x02
37#define ECC_STAT 0x04 /* Corrected error */
38#define DRQ_STAT 0x08
39#define SEEK_STAT 0x10
40#define SRV_STAT 0x10
41#define WRERR_STAT 0x20
42#define READY_STAT 0x40
43#define BUSY_STAT 0x80
44
45/* Bits for HD_ERROR */
46#define MARK_ERR 0x01 /* Bad address mark */
47#define TRK0_ERR 0x02 /* couldn't find track 0 */
48#define ABRT_ERR 0x04 /* Command aborted */
49#define MCR_ERR 0x08 /* media change request */
50#define ID_ERR 0x10 /* ID field not found */
51#define MC_ERR 0x20 /* media changed */
52#define ECC_ERR 0x40 /* Uncorrectable ECC error */
53#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
54#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
55
56/* Bits of HD_NSECTOR */
57#define CD 0x01
58#define IO 0x02
59#define REL 0x04
60#define TAG_MASK 0xf8
61#endif /* __KERNEL__ */
62
63/*
64 * Command Header sizes for IOCTL commands
65 */
66
67#define HDIO_DRIVE_CMD_HDR_SIZE (4 * sizeof(u8))
68#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(u8))
69#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(u8))
70
71#define IDE_DRIVE_TASK_INVALID -1
72#define IDE_DRIVE_TASK_NO_DATA 0
73#define IDE_DRIVE_TASK_SET_XFER 1
74
75#define IDE_DRIVE_TASK_IN 2
76
77#define IDE_DRIVE_TASK_OUT 3
78#define IDE_DRIVE_TASK_RAW_WRITE 4
79
80/*
81 * Define standard taskfile in/out register
82 */
83#define IDE_TASKFILE_STD_OUT_FLAGS 0xFE
84#define IDE_TASKFILE_STD_IN_FLAGS 0xFE
85#define IDE_HOB_STD_OUT_FLAGS 0x3C
86#define IDE_HOB_STD_IN_FLAGS 0x3C
87
88typedef unsigned char task_ioreg_t;
89typedef unsigned long sata_ioreg_t;
90
91typedef union ide_reg_valid_s {
92 unsigned all : 16;
93 struct {
94 unsigned data : 1;
95 unsigned error_feature : 1;
96 unsigned sector : 1;
97 unsigned nsector : 1;
98 unsigned lcyl : 1;
99 unsigned hcyl : 1;
100 unsigned select : 1;
101 unsigned status_command : 1;
102
103 unsigned data_hob : 1;
104 unsigned error_feature_hob : 1;
105 unsigned sector_hob : 1;
106 unsigned nsector_hob : 1;
107 unsigned lcyl_hob : 1;
108 unsigned hcyl_hob : 1;
109 unsigned select_hob : 1;
110 unsigned control_hob : 1;
111 } b;
112} ide_reg_valid_t;
113
114typedef struct ide_task_request_s {
115 task_ioreg_t io_ports[8];
116 task_ioreg_t hob_ports[8];
117 ide_reg_valid_t out_flags;
118 ide_reg_valid_t in_flags;
119 int data_phase;
120 int req_cmd;
121 unsigned long out_size;
122 unsigned long in_size;
123} ide_task_request_t;
124
125typedef struct ide_ioctl_request_s {
126 ide_task_request_t *task_request;
127 unsigned char *out_buffer;
128 unsigned char *in_buffer;
129} ide_ioctl_request_t;
130
131struct hd_drive_cmd_hdr {
132 task_ioreg_t command;
133 task_ioreg_t sector_number;
134 task_ioreg_t feature;
135 task_ioreg_t sector_count;
136};
137
138typedef struct hd_drive_task_hdr {
139 task_ioreg_t data;
140 task_ioreg_t feature;
141 task_ioreg_t sector_count;
142 task_ioreg_t sector_number;
143 task_ioreg_t low_cylinder;
144 task_ioreg_t high_cylinder;
145 task_ioreg_t device_head;
146 task_ioreg_t command;
147} task_struct_t;
148
149typedef struct hd_drive_hob_hdr {
150 task_ioreg_t data;
151 task_ioreg_t feature;
152 task_ioreg_t sector_count;
153 task_ioreg_t sector_number;
154 task_ioreg_t low_cylinder;
155 task_ioreg_t high_cylinder;
156 task_ioreg_t device_head;
157 task_ioreg_t control;
158} hob_struct_t;
159
160#define TASKFILE_INVALID 0x7fff
161#define TASKFILE_48 0x8000
162
163#define TASKFILE_NO_DATA 0x0000
164
165#define TASKFILE_IN 0x0001
166#define TASKFILE_MULTI_IN 0x0002
167
168#define TASKFILE_OUT 0x0004
169#define TASKFILE_MULTI_OUT 0x0008
170#define TASKFILE_IN_OUT 0x0010
171
172#define TASKFILE_IN_DMA 0x0020
173#define TASKFILE_OUT_DMA 0x0040
174#define TASKFILE_IN_DMAQ 0x0080
175#define TASKFILE_OUT_DMAQ 0x0100
176
177#define TASKFILE_P_IN 0x0200
178#define TASKFILE_P_OUT 0x0400
179#define TASKFILE_P_IN_DMA 0x0800
180#define TASKFILE_P_OUT_DMA 0x1000
181#define TASKFILE_P_IN_DMAQ 0x2000
182#define TASKFILE_P_OUT_DMAQ 0x4000
183
184/* ATA/ATAPI Commands pre T13 Spec */
185#define WIN_NOP 0x00
186/*
187 * 0x01->0x02 Reserved
188 */
189#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
190/*
191 * 0x04->0x07 Reserved
192 */
193#define WIN_SRST 0x08 /* ATAPI soft reset command */
194#define WIN_DEVICE_RESET 0x08
195/*
196 * 0x09->0x0F Reserved
197 */
198#define WIN_RECAL 0x10
199#define WIN_RESTORE WIN_RECAL
200/*
201 * 0x10->0x1F Reserved
202 */
203#define WIN_READ 0x20 /* 28-Bit */
204#define WIN_READ_ONCE 0x21 /* 28-Bit without retries */
205#define WIN_READ_LONG 0x22 /* 28-Bit */
206#define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */
207#define WIN_READ_EXT 0x24 /* 48-Bit */
208#define WIN_READDMA_EXT 0x25 /* 48-Bit */
209#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */
210#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
211/*
212 * 0x28
213 */
214#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
215/*
216 * 0x2A->0x2F Reserved
217 */
218#define WIN_WRITE 0x30 /* 28-Bit */
219#define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */
220#define WIN_WRITE_LONG 0x32 /* 28-Bit */
221#define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */
222#define WIN_WRITE_EXT 0x34 /* 48-Bit */
223#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
224#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
225#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
226#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
227#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
228/*
229 * 0x3A->0x3B Reserved
230 */
231#define WIN_WRITE_VERIFY 0x3C /* 28-Bit */
232/*
233 * 0x3D->0x3F Reserved
234 */
235#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
236#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without retries */
237#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
238/*
239 * 0x43->0x4F Reserved
240 */
241#define WIN_FORMAT 0x50
242/*
243 * 0x51->0x5F Reserved
244 */
245#define WIN_INIT 0x60
246/*
247 * 0x61->0x5F Reserved
248 */
249#define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */
250
251#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
252#define WIN_DIAGNOSE 0x90
253#define WIN_SPECIFY 0x91 /* set drive geometry translation */
254#define WIN_DOWNLOAD_MICROCODE 0x92
255#define WIN_STANDBYNOW2 0x94
256#define WIN_STANDBY2 0x96
257#define WIN_SETIDLE2 0x97
258#define WIN_CHECKPOWERMODE2 0x98
259#define WIN_SLEEPNOW2 0x99
260/*
261 * 0x9A VENDOR
262 */
263#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
264#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
265#define WIN_QUEUED_SERVICE 0xA2
266#define WIN_SMART 0xB0 /* self-monitoring and reporting */
267#define CFA_ERASE_SECTORS 0xC0
268#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
269#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
270#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
271#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers */
272#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
273#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */
274#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
275#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */
276#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers */
277#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
278#define WIN_GETMEDIASTATUS 0xDA
279#define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */
280#define WIN_POSTBOOT 0xDC
281#define WIN_PREBOOT 0xDD
282#define WIN_DOORLOCK 0xDE /* lock door on removable drives */
283#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives */
284#define WIN_STANDBYNOW1 0xE0
285#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
286#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
287#define WIN_SETIDLE1 0xE3
288#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
289#define WIN_CHECKPOWERMODE1 0xE5
290#define WIN_SLEEPNOW1 0xE6
291#define WIN_FLUSH_CACHE 0xE7
292#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
293#define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */
294 /* SET_FEATURES 0x22 or 0xDD */
295#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
296#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
297#define WIN_MEDIAEJECT 0xED
298#define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */
299#define WIN_SETFEATURES 0xEF /* set special drive features */
300#define EXABYTE_ENABLE_NEST 0xF0
301#define WIN_SECURITY_SET_PASS 0xF1
302#define WIN_SECURITY_UNLOCK 0xF2
303#define WIN_SECURITY_ERASE_PREPARE 0xF3
304#define WIN_SECURITY_ERASE_UNIT 0xF4
305#define WIN_SECURITY_FREEZE_LOCK 0xF5
306#define WIN_SECURITY_DISABLE 0xF6
307#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
308#define WIN_SET_MAX 0xF9
309#define DISABLE_SEAGATE 0xFB
310
311/* WIN_SMART sub-commands */
312
313#define SMART_READ_VALUES 0xD0
314#define SMART_READ_THRESHOLDS 0xD1
315#define SMART_AUTOSAVE 0xD2
316#define SMART_SAVE 0xD3
317#define SMART_IMMEDIATE_OFFLINE 0xD4
318#define SMART_READ_LOG_SECTOR 0xD5
319#define SMART_WRITE_LOG_SECTOR 0xD6
320#define SMART_WRITE_THRESHOLDS 0xD7
321#define SMART_ENABLE 0xD8
322#define SMART_DISABLE 0xD9
323#define SMART_STATUS 0xDA
324#define SMART_AUTO_OFFLINE 0xDB
325
326/* Password used in TF4 & TF5 executing SMART commands */
327
328#define SMART_LCYL_PASS 0x4F
329#define SMART_HCYL_PASS 0xC2
330
331/* WIN_SETFEATURES sub-commands */
332#define SETFEATURES_EN_8BIT 0x01 /* Enable 8-Bit Transfers */
333#define SETFEATURES_EN_WCACHE 0x02 /* Enable write cache */
334#define SETFEATURES_DIS_DEFECT 0x04 /* Disable Defect Management */
335#define SETFEATURES_EN_APM 0x05 /* Enable advanced power management */
336#define SETFEATURES_EN_SAME_R 0x22 /* for a region ATA-1 */
337#define SETFEATURES_DIS_MSN 0x31 /* Disable Media Status Notification */
338#define SETFEATURES_DIS_RETRY 0x33 /* Disable Retry */
339#define SETFEATURES_EN_AAM 0x42 /* Enable Automatic Acoustic Management */
340#define SETFEATURES_RW_LONG 0x44 /* Set Length of VS bytes */
341#define SETFEATURES_SET_CACHE 0x54 /* Set Cache segments to SC Reg. Val */
342#define SETFEATURES_DIS_RLA 0x55 /* Disable read look-ahead feature */
343#define SETFEATURES_EN_RI 0x5D /* Enable release interrupt */
344#define SETFEATURES_EN_SI 0x5E /* Enable SERVICE interrupt */
345#define SETFEATURES_DIS_RPOD 0x66 /* Disable reverting to power on defaults */
346#define SETFEATURES_DIS_ECC 0x77 /* Disable ECC byte count */
347#define SETFEATURES_DIS_8BIT 0x81 /* Disable 8-Bit Transfers */
348#define SETFEATURES_DIS_WCACHE 0x82 /* Disable write cache */
349#define SETFEATURES_EN_DEFECT 0x84 /* Enable Defect Management */
350#define SETFEATURES_DIS_APM 0x85 /* Disable advanced power management */
351#define SETFEATURES_EN_ECC 0x88 /* Enable ECC byte count */
352#define SETFEATURES_EN_MSN 0x95 /* Enable Media Status Notification */
353#define SETFEATURES_EN_RETRY 0x99 /* Enable Retry */
354#define SETFEATURES_EN_RLA 0xAA /* Enable read look-ahead feature */
355#define SETFEATURES_PREFETCH 0xAB /* Sets drive prefetch value */
356#define SETFEATURES_EN_REST 0xAC /* ATA-1 */
357#define SETFEATURES_4B_RW_LONG 0xBB /* Set Lenght of 4 bytes */
358#define SETFEATURES_DIS_AAM 0xC2 /* Disable Automatic Acoustic Management */
359#define SETFEATURES_EN_RPOD 0xCC /* Enable reverting to power on defaults */
360#define SETFEATURES_DIS_RI 0xDD /* Disable release interrupt ATAPI */
361#define SETFEATURES_EN_SAME_M 0xDD /* for a entire device ATA-1 */
362#define SETFEATURES_DIS_SI 0xDE /* Disable SERVICE interrupt ATAPI */
363
364/* WIN_SECURITY sub-commands */
365
366#define SECURITY_SET_PASSWORD 0xBA
367#define SECURITY_UNLOCK 0xBB
368#define SECURITY_ERASE_PREPARE 0xBC
369#define SECURITY_ERASE_UNIT 0xBD
370#define SECURITY_FREEZE_LOCK 0xBE
371#define SECURITY_DISABLE_PASSWORD 0xBF
372
373struct hd_geometry {
374 unsigned char heads;
375 unsigned char sectors;
376 unsigned short cylinders;
377 unsigned long start;
378};
379
380/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
381#define HDIO_GETGEO 0x0301 /* get device geometry */
382#define HDIO_GET_UNMASKINTR 0x0302 /* get current unmask setting */
383#define HDIO_GET_MULTCOUNT 0x0304 /* get current IDE blockmode setting */
384#define HDIO_GET_QDMA 0x0305 /* get use-qdma flag */
385
386#define HDIO_SET_XFER 0x0306 /* set transfer rate via proc */
387
388#define HDIO_OBSOLETE_IDENTITY 0x0307 /* OBSOLETE, DO NOT USE: returns 142 bytes */
389#define HDIO_GET_KEEPSETTINGS 0x0308 /* get keep-settings-on-reset flag */
390#define HDIO_GET_32BIT 0x0309 /* get current io_32bit setting */
391#define HDIO_GET_NOWERR 0x030a /* get ignore-write-error flag */
392#define HDIO_GET_DMA 0x030b /* get use-dma flag */
393#define HDIO_GET_NICE 0x030c /* get nice flags */
394#define HDIO_GET_IDENTITY 0x030d /* get IDE identification info */
395#define HDIO_GET_WCACHE 0x030e /* get write cache mode on|off */
396#define HDIO_GET_ACOUSTIC 0x030f /* get acoustic value */
397#define HDIO_GET_ADDRESS 0x0310 /* */
398
399#define HDIO_GET_BUSSTATE 0x031a /* get the bus state of the hwif */
400#define HDIO_TRISTATE_HWIF 0x031b /* execute a channel tristate */
401#define HDIO_DRIVE_RESET 0x031c /* execute a device reset */
402#define HDIO_DRIVE_TASKFILE 0x031d /* execute raw taskfile */
403#define HDIO_DRIVE_TASK 0x031e /* execute task and special drive command */
404#define HDIO_DRIVE_CMD 0x031f /* execute a special drive command */
405#define HDIO_DRIVE_CMD_AEB HDIO_DRIVE_TASK
406
407/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
408#define HDIO_SET_MULTCOUNT 0x0321 /* change IDE blockmode */
409#define HDIO_SET_UNMASKINTR 0x0322 /* permit other irqs during I/O */
410#define HDIO_SET_KEEPSETTINGS 0x0323 /* keep ioctl settings on reset */
411#define HDIO_SET_32BIT 0x0324 /* change io_32bit flags */
412#define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */
413#define HDIO_SET_DMA 0x0326 /* change use-dma flag */
414#define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */
415#define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */
416#define HDIO_SET_NICE 0x0329 /* set nice flags */
417#define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */
418#define HDIO_SET_WCACHE 0x032b /* change write cache enable-disable */
419#define HDIO_SET_ACOUSTIC 0x032c /* change acoustic behavior */
420#define HDIO_SET_BUSSTATE 0x032d /* set the bus state of the hwif */
421#define HDIO_SET_QDMA 0x032e /* change use-qdma flag */
422#define HDIO_SET_ADDRESS 0x032f /* change lba addressing modes */
423
424/* bus states */
425enum {
426 BUSSTATE_OFF = 0,
427 BUSSTATE_ON,
428 BUSSTATE_TRISTATE
429};
430
431/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
432/* 0x330 is reserved - used to be HDIO_GETGEO_BIG */
433/* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */
434/* 0x338 is reserved - used to be HDIO_SET_IDE_SCSI */
435/* 0x339 is reserved - used to be HDIO_SET_SCSI_IDE */
436
437#define __NEW_HD_DRIVE_ID
438
439/*
440 * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
441 *
442 * If you change something here, please remember to update fix_driveid() in
443 * ide/probe.c.
444 */
445struct hd_driveid {
446 unsigned short config; /* lots of obsolete bit flags */
447 unsigned short cyls; /* Obsolete, "physical" cyls */
448 unsigned short reserved2; /* reserved (word 2) */
449 unsigned short heads; /* Obsolete, "physical" heads */
450 unsigned short track_bytes; /* unformatted bytes per track */
451 unsigned short sector_bytes; /* unformatted bytes per sector */
452 unsigned short sectors; /* Obsolete, "physical" sectors per track */
453 unsigned short vendor0; /* vendor unique */
454 unsigned short vendor1; /* vendor unique */
455 unsigned short vendor2; /* Retired vendor unique */
456 unsigned char serial_no[20]; /* 0 = not_specified */
457 unsigned short buf_type; /* Retired */
458 unsigned short buf_size; /* Retired, 512 byte increments
459 * 0 = not_specified
460 */
461 unsigned short ecc_bytes; /* for r/w long cmds; 0 = not_specified */
462 unsigned char fw_rev[8]; /* 0 = not_specified */
463 unsigned char model[40]; /* 0 = not_specified */
464 unsigned char max_multsect; /* 0=not_implemented */
465 unsigned char vendor3; /* vendor unique */
466 unsigned short dword_io; /* 0=not_implemented; 1=implemented */
467 unsigned char vendor4; /* vendor unique */
468 unsigned char capability; /* (upper byte of word 49)
469 * 3: IORDYsup
470 * 2: IORDYsw
471 * 1: LBA
472 * 0: DMA
473 */
474 unsigned short reserved50; /* reserved (word 50) */
475 unsigned char vendor5; /* Obsolete, vendor unique */
476 unsigned char tPIO; /* Obsolete, 0=slow, 1=medium, 2=fast */
477 unsigned char vendor6; /* Obsolete, vendor unique */
478 unsigned char tDMA; /* Obsolete, 0=slow, 1=medium, 2=fast */
479 unsigned short field_valid; /* (word 53)
480 * 2: ultra_ok word 88
481 * 1: eide_ok words 64-70
482 * 0: cur_ok words 54-58
483 */
484 unsigned short cur_cyls; /* Obsolete, logical cylinders */
485 unsigned short cur_heads; /* Obsolete, l heads */
486 unsigned short cur_sectors; /* Obsolete, l sectors per track */
487 unsigned short cur_capacity0; /* Obsolete, l total sectors on drive */
488 unsigned short cur_capacity1; /* Obsolete, (2 words, misaligned int) */
489 unsigned char multsect; /* current multiple sector count */
490 unsigned char multsect_valid; /* when (bit0==1) multsect is ok */
491 unsigned int lba_capacity; /* Obsolete, total number of sectors */
492 unsigned short dma_1word; /* Obsolete, single-word dma info */
493 unsigned short dma_mword; /* multiple-word dma info */
494 unsigned short eide_pio_modes; /* bits 0:mode3 1:mode4 */
495 unsigned short eide_dma_min; /* min mword dma cycle time (ns) */
496 unsigned short eide_dma_time; /* recommended mword dma cycle time (ns) */
497 unsigned short eide_pio; /* min cycle time (ns), no IORDY */
498 unsigned short eide_pio_iordy; /* min cycle time (ns), with IORDY */
499 unsigned short words69_70[2]; /* reserved words 69-70
500 * future command overlap and queuing
501 */
502 /* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
503 unsigned short words71_74[4]; /* reserved words 71-74
504 * for IDENTIFY PACKET DEVICE command
505 */
506 unsigned short queue_depth; /* (word 75)
507 * 15:5 reserved
508 * 4:0 Maximum queue depth -1
509 */
510 unsigned short words76_79[4]; /* reserved words 76-79 */
511 unsigned short major_rev_num; /* (word 80) */
512 unsigned short minor_rev_num; /* (word 81) */
513 unsigned short command_set_1; /* (word 82) supported
514 * 15: Obsolete
515 * 14: NOP command
516 * 13: READ_BUFFER
517 * 12: WRITE_BUFFER
518 * 11: Obsolete
519 * 10: Host Protected Area
520 * 9: DEVICE Reset
521 * 8: SERVICE Interrupt
522 * 7: Release Interrupt
523 * 6: look-ahead
524 * 5: write cache
525 * 4: PACKET Command
526 * 3: Power Management Feature Set
527 * 2: Removable Feature Set
528 * 1: Security Feature Set
529 * 0: SMART Feature Set
530 */
531 unsigned short command_set_2; /* (word 83)
532 * 15: Shall be ZERO
533 * 14: Shall be ONE
534 * 13: FLUSH CACHE EXT
535 * 12: FLUSH CACHE
536 * 11: Device Configuration Overlay
537 * 10: 48-bit Address Feature Set
538 * 9: Automatic Acoustic Management
539 * 8: SET MAX security
540 * 7: reserved 1407DT PARTIES
541 * 6: SetF sub-command Power-Up
542 * 5: Power-Up in Standby Feature Set
543 * 4: Removable Media Notification
544 * 3: APM Feature Set
545 * 2: CFA Feature Set
546 * 1: READ/WRITE DMA QUEUED
547 * 0: Download MicroCode
548 */
549 unsigned short cfsse; /* (word 84)
550 * cmd set-feature supported extensions
551 * 15: Shall be ZERO
552 * 14: Shall be ONE
553 * 13:6 reserved
554 * 5: General Purpose Logging
555 * 4: Streaming Feature Set
556 * 3: Media Card Pass Through
557 * 2: Media Serial Number Valid
558 * 1: SMART selt-test supported
559 * 0: SMART error logging
560 */
561 unsigned short cfs_enable_1; /* (word 85)
562 * command set-feature enabled
563 * 15: Obsolete
564 * 14: NOP command
565 * 13: READ_BUFFER
566 * 12: WRITE_BUFFER
567 * 11: Obsolete
568 * 10: Host Protected Area
569 * 9: DEVICE Reset
570 * 8: SERVICE Interrupt
571 * 7: Release Interrupt
572 * 6: look-ahead
573 * 5: write cache
574 * 4: PACKET Command
575 * 3: Power Management Feature Set
576 * 2: Removable Feature Set
577 * 1: Security Feature Set
578 * 0: SMART Feature Set
579 */
580 unsigned short cfs_enable_2; /* (word 86)
581 * command set-feature enabled
582 * 15: Shall be ZERO
583 * 14: Shall be ONE
584 * 13: FLUSH CACHE EXT
585 * 12: FLUSH CACHE
586 * 11: Device Configuration Overlay
587 * 10: 48-bit Address Feature Set
588 * 9: Automatic Acoustic Management
589 * 8: SET MAX security
590 * 7: reserved 1407DT PARTIES
591 * 6: SetF sub-command Power-Up
592 * 5: Power-Up in Standby Feature Set
593 * 4: Removable Media Notification
594 * 3: APM Feature Set
595 * 2: CFA Feature Set
596 * 1: READ/WRITE DMA QUEUED
597 * 0: Download MicroCode
598 */
599 unsigned short csf_default; /* (word 87)
600 * command set-feature default
601 * 15: Shall be ZERO
602 * 14: Shall be ONE
603 * 13:6 reserved
604 * 5: General Purpose Logging enabled
605 * 4: Valid CONFIGURE STREAM executed
606 * 3: Media Card Pass Through enabled
607 * 2: Media Serial Number Valid
608 * 1: SMART selt-test supported
609 * 0: SMART error logging
610 */
611 unsigned short dma_ultra; /* (word 88) */
612 unsigned short trseuc; /* time required for security erase */
613 unsigned short trsEuc; /* time required for enhanced erase */
614 unsigned short CurAPMvalues; /* current APM values */
615 unsigned short mprc; /* master password revision code */
616 unsigned short hw_config; /* hardware config (word 93)
617 * 15: Shall be ZERO
618 * 14: Shall be ONE
619 * 13:
620 * 12:
621 * 11:
622 * 10:
623 * 9:
624 * 8:
625 * 7:
626 * 6:
627 * 5:
628 * 4:
629 * 3:
630 * 2:
631 * 1:
632 * 0: Shall be ONE
633 */
634 unsigned short acoustic; /* (word 94)
635 * 15:8 Vendor's recommended value
636 * 7:0 current value
637 */
638 unsigned short msrqs; /* min stream request size */
639 unsigned short sxfert; /* stream transfer time */
640 unsigned short sal; /* stream access latency */
641 unsigned int spg; /* stream performance granularity */
642 unsigned long long lba_capacity_2;/* 48-bit total number of sectors */
643 unsigned short words104_125[22];/* reserved words 104-125 */
644 unsigned short last_lun; /* (word 126) */
645 unsigned short word127; /* (word 127) Feature Set
646 * Removable Media Notification
647 * 15:2 reserved
648 * 1:0 00 = not supported
649 * 01 = supported
650 * 10 = reserved
651 * 11 = reserved
652 */
653 unsigned short dlf; /* (word 128)
654 * device lock function
655 * 15:9 reserved
656 * 8 security level 1:max 0:high
657 * 7:6 reserved
658 * 5 enhanced erase
659 * 4 expire
660 * 3 frozen
661 * 2 locked
662 * 1 en/disabled
663 * 0 capability
664 */
665 unsigned short csfo; /* (word 129)
666 * current set features options
667 * 15:4 reserved
668 * 3: auto reassign
669 * 2: reverting
670 * 1: read-look-ahead
671 * 0: write cache
672 */
673 unsigned short words130_155[26];/* reserved vendor words 130-155 */
674 unsigned short word156; /* reserved vendor word 156 */
675 unsigned short words157_159[3];/* reserved vendor words 157-159 */
676 unsigned short cfa_power; /* (word 160) CFA Power Mode
677 * 15 word 160 supported
678 * 14 reserved
679 * 13
680 * 12
681 * 11:0
682 */
683 unsigned short words161_175[15];/* Reserved for CFA */
684 unsigned short words176_205[30];/* Current Media Serial Number */
685 unsigned short words206_254[49];/* reserved words 206-254 */
686 unsigned short integrity_word; /* (word 255)
687 * 15:8 Checksum
688 * 7:0 Signature
689 */
690};
691
692/*
693 * IDE "nice" flags. These are used on a per drive basis to determine
694 * when to be nice and give more bandwidth to the other devices which
695 * share the same IDE bus.
696 */
697#define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */
698#define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */
699#define IDE_NICE_0 (2) /* when sure that it won't affect us */
700#define IDE_NICE_1 (3) /* when probably won't affect us much */
701#define IDE_NICE_2 (4) /* when we know it's on our expense */
702
703#endif /* _LINUX_HDREG_H */