Something went wrong. Try again.
(I'm so sorry!) Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273# SPDX-License-Identifier: GPL-2.0##### kbuild: Generic definitions
# Convenient variablescomma := ,quote := "squote := 'empty :=space := $(empty) $(empty)space_escape := _-_SPACE_-_pound := \#define newline
endef
#### Comparison macros.# Usage: $(call test-lt, $(CONFIG_LLD_VERSION), 150000)## Use $(intcmp ...) if supported. (Make >= 4.4)# Otherwise, fall back to the 'test' shell command.ifeq ($(intcmp 1,0,,,y),y)test-ge = $(intcmp $(strip $1)0, $(strip $2)0,,y,y)test-gt = $(intcmp $(strip $1)0, $(strip $2)0,,,y)elsetest-ge = $(shell test $(strip $1)0 -ge $(strip $2)0 && echo y)test-gt = $(shell test $(strip $1)0 -gt $(strip $2)0 && echo y)endiftest-le = $(call test-ge, $2, $1)test-lt = $(call test-gt, $2, $1)
#### Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.odot-target = $(dir $@).$(notdir $@)
#### Name of target with a '.tmp_' as filename prefix. foo/bar.o => foo/.tmp_bar.otmp-target = $(dir $@).tmp_$(notdir $@)
#### The temporary file to save gcc -MMD generated dependencies must not# contain a commadepfile = $(subst $(comma),_,$(dot-target).d)
#### filename of target with directory and extension strippedbasetarget = $(basename $(notdir $@))
#### real prerequisites without phony targetsreal-prereqs = $(filter-out $(PHONY), $^)
#### Escape single quote for use in echo statementsescsq = $(subst $(squote),'\$(squote)',$1)
#### Quote a string to pass it to C files. foo => '"foo"'stringify = $(squote)$(quote)$1$(quote)$(squote)
#### The path to Kbuild or Makefile. Kbuild has precedence over Makefile.kbuild-file = $(or $(wildcard $(src)/Kbuild),$(src)/Makefile)
#### Read a file, replacing newlines with spaces## Make 4.2 or later can read a file by using its builtin function.ifneq ($(filter-out 4.0 4.1, $(MAKE_VERSION)),)read-file = $(subst $(newline),$(space),$(file < $1))elseread-file = $(shell cat $1 2>/dev/null)endif
#### Easy method for doing a status message kecho := : quiet_kecho := echosilent_kecho := :kecho := $($(quiet)kecho)
#### filechk is used to check if the content of a generated file is updated.# Sample usage:## filechk_sample = echo $(KERNELRELEASE)# version.h: FORCE# $(call filechk,sample)## The rule defined shall write to stdout the content of the new file.# The existing file will be compared with the new one.# - If no file exist it is created# - If the content differ the new file is used# - If they are equal no change, and no timestamp updatedefine filechk $(check-FORCE) $(Q)set -e; \ mkdir -p $(dir $@); \ trap "rm -f $(tmp-target)" EXIT; \ { $(filechk_$(1)); } > $(tmp-target); \ if [ ! -r $@ ] || ! cmp -s $@ $(tmp-target); then \ $(kecho) ' UPD $@'; \ mv -f $(tmp-target) $@; \ fiendef
#### Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=# Usage:# $(Q)$(MAKE) $(build)=dirbuild := -f $(srctree)/scripts/Makefile.build obj
#### Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=# Usage:# $(Q)$(MAKE) $(clean)=dirclean := -f $(srctree)/scripts/Makefile.clean obj
# pring log## If quiet is "silent_", print nothing and sink stdout# If quiet is "quiet_", print short log# If quiet is empty, print short log and whole commandsilent_log_print = exec >/dev/null; quiet_log_print = $(if $(quiet_cmd_$1), echo ' $(call escsq,$(quiet_cmd_$1)$(why))';) log_print = echo '$(pound) $(call escsq,$(or $(quiet_cmd_$1),cmd_$1 $@)$(why))'; \ echo ' $(call escsq,$(cmd_$1))';
# Delete the target on interruption## GNU Make automatically deletes the target if it has already been changed by# the interrupted recipe. So, you can safely stop the build by Ctrl-C (Make# will delete incomplete targets), and resume it later.## However, this does not work when the stderr is piped to another program, like# $ make >&2 | tee log# Make dies with SIGPIPE before cleaning the targets.## To address it, we clean the target in signal traps.## Make deletes the target when it catches SIGHUP, SIGINT, SIGQUIT, SIGTERM.# So, we cover them, and also SIGPIPE just in case.## Of course, this is unneeded for phony targets.delete-on-interrupt = \ $(if $(filter-out $(PHONY), $@), \ $(foreach sig, HUP INT QUIT TERM PIPE, \ trap 'rm -f $@; trap - $(sig); kill -s $(sig) $$$$' $(sig);))
# print and execute commandscmd = @$(if $(cmd_$(1)),set -e; $($(quiet)log_print) $(delete-on-interrupt) $(cmd_$(1)),:)
#### if_changed - execute command if any prerequisite is newer than# target, or command line has changed# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies# including used config symbols# if_changed_rule - as if_changed but execute rule instead# See Documentation/kbuild/makefiles.rst for more info
ifneq ($(KBUILD_NOCMDDEP),1)# Check if both commands are the same including their order. Result is empty# string if equal. User may override this check using make KBUILD_NOCMDDEP=1# If the target does not exist, the *.cmd file should not be included so# $(savedcmd_$@) gets empty. Then, target will be built even if $(newer-prereqs)# happens to become empty.cmd-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(savedcmd_$@))), \ $(subst $(space),$(space_escape),$(strip $(cmd_$1))))else# We still need to detect missing targets.cmd-check = $(if $(strip $(savedcmd_$@)),,1)endif
# Replace >$< with >$$< to preserve $ when reloading the .cmd file# (needed for make)# Replace >#< with >$(pound)< to avoid starting a comment in the .cmd file# (needed for make)# Replace >'< with >'\''< to be able to enclose the whole string in '...'# (needed for the shell)make-cmd = $(call escsq,$(subst $(pound),$$(pound),$(subst $$,$$$$,$(cmd_$(1)))))
# Find any prerequisites that are newer than target or that do not exist.# PHONY targets skipped in both cases.# If there is no prerequisite other than phony targets, $(newer-prereqs) becomes# empty even if the target does not exist. cmd-check saves this corner case.newer-prereqs = $(filter-out $(PHONY),$?)
# It is a typical mistake to forget the FORCE prerequisite. Check it here so# no more breakage will slip in.check-FORCE = $(if $(filter FORCE, $^),,$(warning FORCE prerequisite is missing))
if-changed-cond = $(newer-prereqs)$(cmd-check)$(check-FORCE)
# Execute command if command has changed or prerequisite(s) are updated.if_changed = $(if $(if-changed-cond),$(cmd_and_savecmd),@:)
cmd_and_savecmd = \ $(cmd); \ printf '%s\n' 'savedcmd_$@ := $(make-cmd)' > $(dot-target).cmd
# Execute the command and also postprocess generated .d dependencies file.if_changed_dep = $(if $(if-changed-cond),$(cmd_and_fixdep),@:)
cmd_and_fixdep = \ $(cmd); \ $(objtree)/scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).cmd;\ rm -f $(depfile)
# Usage: $(call if_changed_rule,foo)# Will check if $(cmd_foo) or any of the prerequisites changed,# and if so will execute $(rule_foo).if_changed_rule = $(if $(if-changed-cond),$(rule_$(1)),@:)
#### why - tell why a target got built# enabled by make V=2# Output (listed in the order they are checked):# (1) - due to target is PHONY# (2) - due to target missing# (3) - due to: file1.h file2.h# (4) - due to command line change# (5) - due to missing .cmd file# (6) - due to target not in $(targets)# (1) PHONY targets are always build# (2) No target, so we better build it# (3) Prerequisite is newer than target# (4) The command line stored in the file named dir/.target.cmd# differed from actual command line. This happens when compiler# options changes# (5) No dir/.target.cmd file (used to store command line)# (6) No dir/.target.cmd file and target not listed in $(targets)# This is a good hint that there is a bug in the kbuild fileifneq ($(findstring 2, $(KBUILD_VERBOSE)),)_why = \ $(if $(filter $@, $(PHONY)),- due to target is PHONY, \ $(if $(wildcard $@), \ $(if $(newer-prereqs),- due to: $(newer-prereqs), \ $(if $(cmd-check), \ $(if $(savedcmd_$@),- due to command line change, \ $(if $(filter $@, $(targets)), \ - due to missing .cmd file, \ - due to $(notdir $@) not in $$(targets) \ ) \ ) \ ) \ ), \ - due to target missing \ ) \ )
why = $(space)$(strip $(_why))endif
###############################################################################
# delete partially updated (i.e. corrupted) files on error.DELETE_ON_ERROR:
# do not delete intermediate files automatically## .NOTINTERMEDIATE is more correct, but only available on newer Make versions.# Make 4.4 introduced .NOTINTERMEDIATE, and it appears in .FEATURES, but the# global .NOTINTERMEDIATE does not work. We can use it on Make > 4.4.# Use .SECONDARY for older Make versions, but "newer-prereq" cannot detect# deleted files.ifneq ($(and $(filter notintermediate, $(.FEATURES)),$(filter-out 4.4,$(MAKE_VERSION))),).NOTINTERMEDIATE:else.SECONDARY:endif