Something went wrong. Try again.
(I'm so sorry!) Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Something went wrong. Try again.
C
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422// SPDX-License-Identifier: GPL-2.0-only/*// Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> */#ifndef _LINUX_PSE_CONTROLLER_H#define _LINUX_PSE_CONTROLLER_H
#include <linux/list.h>#include <linux/netlink.h>#include <linux/kfifo.h>#include <uapi/linux/ethtool.h>#include <uapi/linux/ethtool_netlink_generated.h>#include <linux/regulator/driver.h>
/* Maximum current in uA according to IEEE 802.3-2022 Table 145-1 */#define MAX_PI_CURRENT 1920000/* Maximum power in mW according to IEEE 802.3-2022 Table 145-16 */#define MAX_PI_PW 99900
struct net_device;struct phy_device;struct pse_controller_dev;struct netlink_ext_ack;
/* C33 PSE extended state and substate. */struct ethtool_c33_pse_ext_state_info { enum ethtool_c33_pse_ext_state c33_pse_ext_state; union { enum ethtool_c33_pse_ext_substate_error_condition error_condition; enum ethtool_c33_pse_ext_substate_mr_pse_enable mr_pse_enable; enum ethtool_c33_pse_ext_substate_option_detect_ted option_detect_ted; enum ethtool_c33_pse_ext_substate_option_vport_lim option_vport_lim; enum ethtool_c33_pse_ext_substate_ovld_detected ovld_detected; enum ethtool_c33_pse_ext_substate_power_not_available power_not_available; enum ethtool_c33_pse_ext_substate_short_detected short_detected; u32 __c33_pse_ext_substate; };};
struct ethtool_c33_pse_pw_limit_range { u32 min; u32 max;};
/** * struct pse_irq_desc - notification sender description for IRQ based events. * * @name: the visible name for the IRQ * @map_event: driver callback to map IRQ status into PSE devices with events. */struct pse_irq_desc { const char *name; int (*map_event)(int irq, struct pse_controller_dev *pcdev, unsigned long *notifs, unsigned long *notifs_mask);};
/** * struct pse_control_config - PSE control/channel configuration. * * @podl_admin_control: set PoDL PSE admin control as described in * IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl * @c33_admin_control: set PSE admin control as described in * IEEE 802.3-2022 30.9.1.2.1 acPSEAdminControl */struct pse_control_config { enum ethtool_podl_pse_admin_state podl_admin_control; enum ethtool_c33_pse_admin_state c33_admin_control;};
/** * struct pse_admin_state - PSE operational state * * @podl_admin_state: operational state of the PoDL PSE * functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState * @c33_admin_state: operational state of the PSE * functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState */struct pse_admin_state { enum ethtool_podl_pse_admin_state podl_admin_state; enum ethtool_c33_pse_admin_state c33_admin_state;};
/** * struct pse_pw_status - PSE power detection status * * @podl_pw_status: power detection status of the PoDL PSE. * IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus: * @c33_pw_status: power detection status of the PSE. * IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus: */struct pse_pw_status { enum ethtool_podl_pse_pw_d_status podl_pw_status; enum ethtool_c33_pse_pw_d_status c33_pw_status;};
/** * struct pse_ext_state_info - PSE extended state information * * @c33_ext_state_info: extended state information of the PSE */struct pse_ext_state_info { struct ethtool_c33_pse_ext_state_info c33_ext_state_info;};
/** * struct pse_pw_limit_ranges - PSE power limit configuration range * * @c33_pw_limit_ranges: supported power limit configuration range. The driver * is in charge of the memory allocation. */struct pse_pw_limit_ranges { struct ethtool_c33_pse_pw_limit_range *c33_pw_limit_ranges;};
/** * struct ethtool_pse_control_status - PSE control/channel status. * * @pw_d_id: PSE power domain index. * @podl_admin_state: operational state of the PoDL PSE * functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState * @podl_pw_status: power detection status of the PoDL PSE. * IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus: * @c33_admin_state: operational state of the PSE * functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState * @c33_pw_status: power detection status of the PSE. * IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus: * @c33_pw_class: detected class of a powered PD * IEEE 802.3-2022 30.9.1.1.8 aPSEPowerClassification * @c33_actual_pw: power currently delivered by the PSE in mW * IEEE 802.3-2022 30.9.1.1.23 aPSEActualPower * @c33_ext_state_info: extended state information of the PSE * @c33_avail_pw_limit: available power limit of the PSE in mW * IEEE 802.3-2022 145.2.5.4 pse_avail_pwr * @c33_pw_limit_ranges: supported power limit configuration range. The driver * is in charge of the memory allocation * @c33_pw_limit_nb_ranges: number of supported power limit configuration * ranges * @prio_max: max priority allowed for the c33_prio variable value. * @prio: priority of the PSE. Managed by PSE core in case of static budget * evaluation strategy. */struct ethtool_pse_control_status { u32 pw_d_id; enum ethtool_podl_pse_admin_state podl_admin_state; enum ethtool_podl_pse_pw_d_status podl_pw_status; enum ethtool_c33_pse_admin_state c33_admin_state; enum ethtool_c33_pse_pw_d_status c33_pw_status; u32 c33_pw_class; u32 c33_actual_pw; struct ethtool_c33_pse_ext_state_info c33_ext_state_info; u32 c33_avail_pw_limit; struct ethtool_c33_pse_pw_limit_range *c33_pw_limit_ranges; u32 c33_pw_limit_nb_ranges; u32 prio_max; u32 prio;};
/** * struct pse_controller_ops - PSE controller driver callbacks * * @setup_pi_matrix: Setup PI matrix of the PSE controller. * The PSE PIs devicetree nodes have already been parsed by * of_load_pse_pis() and the pcdev->pi[x]->pairset[y].np * populated. This callback should establish the * relationship between the PSE controller hardware ports * and the PSE Power Interfaces, either through software * mapping or hardware configuration. * @pi_get_admin_state: Get the operational state of the PSE PI. This ops * is mandatory. * @pi_get_pw_status: Get the power detection status of the PSE PI. This * ops is mandatory. * @pi_get_ext_state: Get the extended state of the PSE PI. * @pi_get_pw_class: Get the power class of the PSE PI. * @pi_get_actual_pw: Get actual power of the PSE PI in mW. * @pi_enable: Configure the PSE PI as enabled. * @pi_disable: Configure the PSE PI as disabled. * @pi_get_voltage: Return voltage similarly to get_voltage regulator * callback in uV. * @pi_get_pw_limit: Get the configured power limit of the PSE PI in mW. * @pi_set_pw_limit: Configure the power limit of the PSE PI in mW. * @pi_get_pw_limit_ranges: Get the supported power limit configuration * range. The driver is in charge of the memory * allocation and should return the number of * ranges. * @pi_get_prio: Get the PSE PI priority. * @pi_set_prio: Configure the PSE PI priority. * @pi_get_pw_req: Get the power requested by a PD before enabling the PSE PI. * This is only relevant when an interrupt is registered using * devm_pse_irq_helper helper. */struct pse_controller_ops { int (*setup_pi_matrix)(struct pse_controller_dev *pcdev); int (*pi_get_admin_state)(struct pse_controller_dev *pcdev, int id, struct pse_admin_state *admin_state); int (*pi_get_pw_status)(struct pse_controller_dev *pcdev, int id, struct pse_pw_status *pw_status); int (*pi_get_ext_state)(struct pse_controller_dev *pcdev, int id, struct pse_ext_state_info *ext_state_info); int (*pi_get_pw_class)(struct pse_controller_dev *pcdev, int id); int (*pi_get_actual_pw)(struct pse_controller_dev *pcdev, int id); int (*pi_enable)(struct pse_controller_dev *pcdev, int id); int (*pi_disable)(struct pse_controller_dev *pcdev, int id); int (*pi_get_voltage)(struct pse_controller_dev *pcdev, int id); int (*pi_get_pw_limit)(struct pse_controller_dev *pcdev, int id); int (*pi_set_pw_limit)(struct pse_controller_dev *pcdev, int id, int max_mW); int (*pi_get_pw_limit_ranges)(struct pse_controller_dev *pcdev, int id, struct pse_pw_limit_ranges *pw_limit_ranges); int (*pi_get_prio)(struct pse_controller_dev *pcdev, int id); int (*pi_set_prio)(struct pse_controller_dev *pcdev, int id, unsigned int prio); int (*pi_get_pw_req)(struct pse_controller_dev *pcdev, int id);};
struct module;struct device_node;struct of_phandle_args;struct pse_control;struct ethtool_pse_control_status;
/* PSE PI pairset pinout can either be Alternative A or Alternative B */enum pse_pi_pairset_pinout { ALTERNATIVE_A, ALTERNATIVE_B,};
/** * struct pse_pi_pairset - PSE PI pairset entity describing the pinout * alternative ant its phandle * * @pinout: description of the pinout alternative * @np: device node pointer describing the pairset phandle */struct pse_pi_pairset { enum pse_pi_pairset_pinout pinout; struct device_node *np;};
/** * struct pse_pi - PSE PI (Power Interface) entity as described in * IEEE 802.3-2022 145.2.4 * * @pairset: table of the PSE PI pinout alternative for the two pairset * @np: device node pointer of the PSE PI node * @rdev: regulator represented by the PSE PI * @admin_state_enabled: PI enabled state * @pw_d: Power domain of the PSE PI * @prio: Priority of the PSE PI. Used in static budget evaluation strategy * @isr_pd_detected: PSE PI detection status managed by the interruption * handler. This variable is relevant when the power enabled * management is managed in software like the static * budget evaluation strategy. * @pw_allocated_mW: Power allocated to a PSE PI to manage power budget in * static budget evaluation strategy. */struct pse_pi { struct pse_pi_pairset pairset[2]; struct device_node *np; struct regulator_dev *rdev; bool admin_state_enabled; struct pse_power_domain *pw_d; int prio; bool isr_pd_detected; int pw_allocated_mW;};
/** * struct pse_ntf - PSE notification element * * @id: ID of the PSE control * @notifs: PSE notifications to be reported */struct pse_ntf { int id; unsigned long notifs;};
/** * struct pse_controller_dev - PSE controller entity that might * provide multiple PSE controls * @ops: a pointer to device specific struct pse_controller_ops * @owner: kernel module of the PSE controller driver * @list: internal list of PSE controller devices * @pse_control_head: head of internal list of requested PSE controls * @dev: corresponding driver model device struct * @of_pse_n_cells: number of cells in PSE line specifiers * @nr_lines: number of PSE controls in this controller device * @lock: Mutex for serialization access to the PSE controller * @types: types of the PSE controller * @pi: table of PSE PIs described in this controller device * @no_of_pse_pi: flag set if the pse_pis devicetree node is not used * @irq: PSE interrupt * @pis_prio_max: Maximum value allowed for the PSE PIs priority * @supp_budget_eval_strategies: budget evaluation strategies supported * by the PSE * @ntf_work: workqueue for PSE notification management * @ntf_fifo: PSE notifications FIFO * @ntf_fifo_lock: protect @ntf_fifo writer */struct pse_controller_dev { const struct pse_controller_ops *ops; struct module *owner; struct list_head list; struct list_head pse_control_head; struct device *dev; int of_pse_n_cells; unsigned int nr_lines; struct mutex lock; enum ethtool_pse_types types; struct pse_pi *pi; bool no_of_pse_pi; int irq; unsigned int pis_prio_max; u32 supp_budget_eval_strategies; struct work_struct ntf_work; DECLARE_KFIFO_PTR(ntf_fifo, struct pse_ntf); spinlock_t ntf_fifo_lock; /* Protect @ntf_fifo writer */};
/** * enum pse_budget_eval_strategies - PSE budget evaluation strategies. * @PSE_BUDGET_EVAL_STRAT_DISABLED: Budget evaluation strategy disabled. * @PSE_BUDGET_EVAL_STRAT_STATIC: PSE static budget evaluation strategy. * Budget evaluation strategy based on the power requested during PD * classification. This strategy is managed by the PSE core. * @PSE_BUDGET_EVAL_STRAT_DYNAMIC: PSE dynamic budget evaluation * strategy. Budget evaluation strategy based on the current consumption * per ports compared to the total power budget. This mode is managed by * the PSE controller. */
enum pse_budget_eval_strategies { PSE_BUDGET_EVAL_STRAT_DISABLED = 1 << 0, PSE_BUDGET_EVAL_STRAT_STATIC = 1 << 1, PSE_BUDGET_EVAL_STRAT_DYNAMIC = 1 << 2,};
#if IS_ENABLED(CONFIG_PSE_CONTROLLER)int pse_controller_register(struct pse_controller_dev *pcdev);void pse_controller_unregister(struct pse_controller_dev *pcdev);struct device;int devm_pse_controller_register(struct device *dev, struct pse_controller_dev *pcdev);int devm_pse_irq_helper(struct pse_controller_dev *pcdev, int irq, int irq_flags, const struct pse_irq_desc *d);
struct pse_control *of_pse_control_get(struct device_node *node, struct phy_device *phydev);void pse_control_put(struct pse_control *psec);
int pse_ethtool_get_status(struct pse_control *psec, struct netlink_ext_ack *extack, struct ethtool_pse_control_status *status);int pse_ethtool_set_config(struct pse_control *psec, struct netlink_ext_ack *extack, const struct pse_control_config *config);int pse_ethtool_set_pw_limit(struct pse_control *psec, struct netlink_ext_ack *extack, const unsigned int pw_limit);int pse_ethtool_set_prio(struct pse_control *psec, struct netlink_ext_ack *extack, unsigned int prio);
bool pse_has_podl(struct pse_control *psec);bool pse_has_c33(struct pse_control *psec);
#else
static inline struct pse_control *of_pse_control_get(struct device_node *node, struct phy_device *phydev){ return ERR_PTR(-ENOENT);}
static inline void pse_control_put(struct pse_control *psec){}
static inline int pse_ethtool_get_status(struct pse_control *psec, struct netlink_ext_ack *extack, struct ethtool_pse_control_status *status){ return -EOPNOTSUPP;}
static inline int pse_ethtool_set_config(struct pse_control *psec, struct netlink_ext_ack *extack, const struct pse_control_config *config){ return -EOPNOTSUPP;}
static inline int pse_ethtool_set_pw_limit(struct pse_control *psec, struct netlink_ext_ack *extack, const unsigned int pw_limit){ return -EOPNOTSUPP;}
static inline int pse_ethtool_set_prio(struct pse_control *psec, struct netlink_ext_ack *extack, unsigned int prio){ return -EOPNOTSUPP;}
static inline bool pse_has_podl(struct pse_control *psec){ return false;}
static inline bool pse_has_c33(struct pse_control *psec){ return false;}
#endif
#endif