Something went wrong. Try again.
(I'm so sorry!) Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Something went wrong. Try again.
C
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824/* SPDX-License-Identifier: GPL-2.0-only *//* * pm_runtime.h - Device run-time power management helper functions. * * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl> */
#ifndef _LINUX_PM_RUNTIME_H#define _LINUX_PM_RUNTIME_H
#include <linux/device.h>#include <linux/notifier.h>#include <linux/pm.h>
#include <linux/jiffies.h>
/* Runtime PM flag argument bits */#define RPM_ASYNC 0x01 /* Request is asynchronous */#define RPM_NOWAIT 0x02 /* Don't wait for concurrent state change */#define RPM_GET_PUT 0x04 /* Increment/decrement the usage_count */#define RPM_AUTO 0x08 /* Use autosuspend_delay */#define RPM_TRANSPARENT 0x10 /* Succeed if runtime PM is disabled */
/* * Use this for defining a set of PM operations to be used in all situations * (system suspend, hibernation or runtime PM). * * Note that the behaviour differs from the deprecated UNIVERSAL_DEV_PM_OPS() * macro, which uses the provided callbacks for both runtime PM and system * sleep, while DEFINE_RUNTIME_DEV_PM_OPS() uses pm_runtime_force_suspend() * and pm_runtime_force_resume() for its system sleep callbacks. * * If the underlying dev_pm_ops struct symbol has to be exported, use * EXPORT_RUNTIME_DEV_PM_OPS() or EXPORT_GPL_RUNTIME_DEV_PM_OPS() instead. */#define DEFINE_RUNTIME_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \ _DEFINE_DEV_PM_OPS(name, pm_runtime_force_suspend, \ pm_runtime_force_resume, suspend_fn, \ resume_fn, idle_fn)
#define EXPORT_RUNTIME_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \ EXPORT_DEV_PM_OPS(name) = { \ RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \ }#define EXPORT_GPL_RUNTIME_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \ EXPORT_GPL_DEV_PM_OPS(name) = { \ RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \ }#define EXPORT_NS_RUNTIME_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn, ns) \ EXPORT_NS_DEV_PM_OPS(name, ns) = { \ RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \ }#define EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn, ns) \ EXPORT_NS_GPL_DEV_PM_OPS(name, ns) = { \ RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \ }
#ifdef CONFIG_PMextern struct workqueue_struct *pm_wq;
static inline bool queue_pm_work(struct work_struct *work){ return queue_work(pm_wq, work);}
extern int pm_generic_runtime_suspend(struct device *dev);extern int pm_generic_runtime_resume(struct device *dev);extern int pm_runtime_force_suspend(struct device *dev);
extern int __pm_runtime_idle(struct device *dev, int rpmflags);extern int __pm_runtime_suspend(struct device *dev, int rpmflags);extern int __pm_runtime_resume(struct device *dev, int rpmflags);extern int pm_runtime_get_if_active(struct device *dev);extern int pm_runtime_get_if_in_use(struct device *dev);extern int pm_schedule_suspend(struct device *dev, unsigned int delay);extern int __pm_runtime_set_status(struct device *dev, unsigned int status);extern void pm_runtime_barrier(struct device *dev);extern bool pm_runtime_block_if_disabled(struct device *dev);extern void pm_runtime_unblock(struct device *dev);extern void pm_runtime_enable(struct device *dev);extern void __pm_runtime_disable(struct device *dev, bool check_resume);extern void pm_runtime_allow(struct device *dev);extern void pm_runtime_forbid(struct device *dev);extern void pm_runtime_no_callbacks(struct device *dev);extern void pm_runtime_irq_safe(struct device *dev);extern void __pm_runtime_use_autosuspend(struct device *dev, bool use);extern void pm_runtime_set_autosuspend_delay(struct device *dev, int delay);extern u64 pm_runtime_autosuspend_expiration(struct device *dev);extern void pm_runtime_set_memalloc_noio(struct device *dev, bool enable);extern void pm_runtime_get_suppliers(struct device *dev);extern void pm_runtime_put_suppliers(struct device *dev);extern void pm_runtime_new_link(struct device *dev);extern void pm_runtime_drop_link(struct device_link *link);extern void pm_runtime_release_supplier(struct device_link *link);
int devm_pm_runtime_set_active_enabled(struct device *dev);extern int devm_pm_runtime_enable(struct device *dev);int devm_pm_runtime_get_noresume(struct device *dev);
/** * pm_suspend_ignore_children - Set runtime PM behavior regarding children. * @dev: Target device. * @enable: Whether or not to ignore possible dependencies on children. * * The dependencies of @dev on its children will not be taken into account by * the runtime PM framework going forward if @enable is %true, or they will * be taken into account otherwise. */static inline void pm_suspend_ignore_children(struct device *dev, bool enable){ dev->power.ignore_children = enable;}
/** * pm_runtime_get_noresume - Bump up runtime PM usage counter of a device. * @dev: Target device. */static inline void pm_runtime_get_noresume(struct device *dev){ atomic_inc(&dev->power.usage_count);}
/** * pm_runtime_put_noidle - Drop runtime PM usage counter of a device. * @dev: Target device. * * Decrement the runtime PM usage counter of @dev unless it is 0 already. */static inline void pm_runtime_put_noidle(struct device *dev){ atomic_add_unless(&dev->power.usage_count, -1, 0);}
/** * pm_runtime_suspended - Check whether or not a device is runtime-suspended. * @dev: Target device. * * Return %true if runtime PM is enabled for @dev and its runtime PM status is * %RPM_SUSPENDED, or %false otherwise. * * Note that the return value of this function can only be trusted if it is * called under the runtime PM lock of @dev or under conditions in which * runtime PM cannot be either disabled or enabled for @dev and its runtime PM * status cannot change. */static inline bool pm_runtime_suspended(struct device *dev){ return dev->power.runtime_status == RPM_SUSPENDED && !dev->power.disable_depth;}
/** * pm_runtime_active - Check whether or not a device is runtime-active. * @dev: Target device. * * Return %true if runtime PM is disabled for @dev or its runtime PM status is * %RPM_ACTIVE, or %false otherwise. * * Note that the return value of this function can only be trusted if it is * called under the runtime PM lock of @dev or under conditions in which * runtime PM cannot be either disabled or enabled for @dev and its runtime PM * status cannot change. */static inline bool pm_runtime_active(struct device *dev){ return dev->power.runtime_status == RPM_ACTIVE || dev->power.disable_depth;}
/** * pm_runtime_status_suspended - Check if runtime PM status is "suspended". * @dev: Target device. * * Return %true if the runtime PM status of @dev is %RPM_SUSPENDED, or %false * otherwise, regardless of whether or not runtime PM has been enabled for @dev. * * Note that the return value of this function can only be trusted if it is * called under the runtime PM lock of @dev or under conditions in which the * runtime PM status of @dev cannot change. */static inline bool pm_runtime_status_suspended(struct device *dev){ return dev->power.runtime_status == RPM_SUSPENDED;}
/** * pm_runtime_enabled - Check if runtime PM is enabled. * @dev: Target device. * * Return %true if runtime PM is enabled for @dev or %false otherwise. * * Note that the return value of this function can only be trusted if it is * called under the runtime PM lock of @dev or under conditions in which * runtime PM cannot be either disabled or enabled for @dev. */static inline bool pm_runtime_enabled(struct device *dev){ return !dev->power.disable_depth;}
/** * pm_runtime_blocked - Check if runtime PM enabling is blocked. * @dev: Target device. * * Do not call this function outside system suspend/resume code paths. */static inline bool pm_runtime_blocked(struct device *dev){ return dev->power.last_status == RPM_BLOCKED;}
/** * pm_runtime_has_no_callbacks - Check if runtime PM callbacks may be present. * @dev: Target device. * * Return %true if @dev is a special device without runtime PM callbacks or * %false otherwise. */static inline bool pm_runtime_has_no_callbacks(struct device *dev){ return dev->power.no_callbacks;}
/** * pm_runtime_mark_last_busy - Update the last access time of a device. * @dev: Target device. * * Update the last access time of @dev used by the runtime PM autosuspend * mechanism to the current time as returned by ktime_get_mono_fast_ns(). */static inline void pm_runtime_mark_last_busy(struct device *dev){ WRITE_ONCE(dev->power.last_busy, ktime_get_mono_fast_ns());}
/** * pm_runtime_is_irq_safe - Check if runtime PM can work in interrupt context. * @dev: Target device. * * Return %true if @dev has been marked as an "IRQ-safe" device (with respect * to runtime PM), in which case its runtime PM callabcks can be expected to * work correctly when invoked from interrupt handlers. */static inline bool pm_runtime_is_irq_safe(struct device *dev){ return dev->power.irq_safe;}
extern u64 pm_runtime_suspended_time(struct device *dev);
#else /* !CONFIG_PM */
static inline bool queue_pm_work(struct work_struct *work) { return false; }
static inline int pm_generic_runtime_suspend(struct device *dev) { return 0; }static inline int pm_generic_runtime_resume(struct device *dev) { return 0; }static inline int pm_runtime_force_suspend(struct device *dev) { return 0; }
static inline int __pm_runtime_idle(struct device *dev, int rpmflags){ return -ENOSYS;}static inline int __pm_runtime_suspend(struct device *dev, int rpmflags){ return -ENOSYS;}static inline int __pm_runtime_resume(struct device *dev, int rpmflags){ return 1;}static inline int pm_schedule_suspend(struct device *dev, unsigned int delay){ return -ENOSYS;}static inline int pm_runtime_get_if_in_use(struct device *dev){ return -EINVAL;}static inline int pm_runtime_get_if_active(struct device *dev){ return -EINVAL;}static inline int __pm_runtime_set_status(struct device *dev, unsigned int status) { return 0; }static inline void pm_runtime_barrier(struct device *dev) {}static inline bool pm_runtime_block_if_disabled(struct device *dev) { return true; }static inline void pm_runtime_unblock(struct device *dev) {}static inline void pm_runtime_enable(struct device *dev) {}static inline void __pm_runtime_disable(struct device *dev, bool c) {}static inline bool pm_runtime_blocked(struct device *dev) { return true; }static inline void pm_runtime_allow(struct device *dev) {}static inline void pm_runtime_forbid(struct device *dev) {}
static inline int devm_pm_runtime_set_active_enabled(struct device *dev) { return 0; }static inline int devm_pm_runtime_enable(struct device *dev) { return 0; }static inline int devm_pm_runtime_get_noresume(struct device *dev) { return 0; }
static inline void pm_suspend_ignore_children(struct device *dev, bool enable) {}static inline void pm_runtime_get_noresume(struct device *dev) {}static inline void pm_runtime_put_noidle(struct device *dev) {}static inline bool pm_runtime_suspended(struct device *dev) { return false; }static inline bool pm_runtime_active(struct device *dev) { return true; }static inline bool pm_runtime_status_suspended(struct device *dev) { return false; }static inline bool pm_runtime_enabled(struct device *dev) { return false; }
static inline void pm_runtime_no_callbacks(struct device *dev) {}static inline void pm_runtime_irq_safe(struct device *dev) {}static inline bool pm_runtime_is_irq_safe(struct device *dev) { return false; }
static inline bool pm_runtime_has_no_callbacks(struct device *dev) { return false; }static inline void pm_runtime_mark_last_busy(struct device *dev) {}static inline void __pm_runtime_use_autosuspend(struct device *dev, bool use) {}static inline void pm_runtime_set_autosuspend_delay(struct device *dev, int delay) {}static inline u64 pm_runtime_autosuspend_expiration( struct device *dev) { return 0; }static inline void pm_runtime_set_memalloc_noio(struct device *dev, bool enable){}static inline void pm_runtime_get_suppliers(struct device *dev) {}static inline void pm_runtime_put_suppliers(struct device *dev) {}static inline void pm_runtime_new_link(struct device *dev) {}static inline void pm_runtime_drop_link(struct device_link *link) {}static inline void pm_runtime_release_supplier(struct device_link *link) {}
#endif /* !CONFIG_PM */
#ifdef CONFIG_PM_SLEEP
bool pm_runtime_need_not_resume(struct device *dev);int pm_runtime_force_resume(struct device *dev);
#else /* !CONFIG_PM_SLEEP */
static inline bool pm_runtime_need_not_resume(struct device *dev) {return true; }static inline int pm_runtime_force_resume(struct device *dev) { return -ENXIO; }
#endif /* CONFIG_PM_SLEEP */
/** * pm_runtime_idle - Conditionally set up autosuspend of a device or suspend it. * @dev: Target device. * * Invoke the "idle check" callback of @dev and, depending on its return value, * set up autosuspend of @dev or suspend it (depending on whether or not * autosuspend has been enabled for it). * * Return: * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. * * -EAGAIN: Runtime PM usage counter non-zero, Runtime PM status change * ongoing or device not in %RPM_ACTIVE state. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. * Other values and conditions for the above values are possible as returned by * Runtime PM idle and suspend callbacks. */static inline int pm_runtime_idle(struct device *dev){ return __pm_runtime_idle(dev, 0);}
/** * pm_runtime_suspend - Suspend a device synchronously. * @dev: Target device. * * Return: * * 1: Success; device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. * * -EAGAIN: Runtime PM usage counter non-zero or Runtime PM status change * ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -ENOSYS: CONFIG_PM not enabled. * Other values and conditions for the above values are possible as returned by * Runtime PM suspend callbacks. */static inline int pm_runtime_suspend(struct device *dev){ return __pm_runtime_suspend(dev, 0);}
/** * pm_runtime_autosuspend - Update the last access time and set up autosuspend * of a device. * @dev: Target device. * * First update the last access time, then set up autosuspend of @dev or suspend * it (depending on whether or not autosuspend is enabled for it) without * engaging its "idle check" callback. * * Return: * * 1: Success; device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. * * -EAGAIN: Runtime PM usage counter non-zero or Runtime PM status change * ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -ENOSYS: CONFIG_PM not enabled. * Other values and conditions for the above values are possible as returned by * Runtime PM suspend callbacks. */static inline int pm_runtime_autosuspend(struct device *dev){ pm_runtime_mark_last_busy(dev); return __pm_runtime_suspend(dev, RPM_AUTO);}
/** * pm_runtime_resume - Resume a device synchronously. * @dev: Target device. */static inline int pm_runtime_resume(struct device *dev){ return __pm_runtime_resume(dev, 0);}
/** * pm_request_idle - Queue up "idle check" execution for a device. * @dev: Target device. * * Queue up a work item to run an equivalent of pm_runtime_idle() for @dev * asynchronously. * * Return: * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. * * -EAGAIN: Runtime PM usage counter non-zero, Runtime PM status change * ongoing or device not in %RPM_ACTIVE state. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. */static inline int pm_request_idle(struct device *dev){ return __pm_runtime_idle(dev, RPM_ASYNC);}
/** * pm_request_resume - Queue up runtime-resume of a device. * @dev: Target device. */static inline int pm_request_resume(struct device *dev){ return __pm_runtime_resume(dev, RPM_ASYNC);}
/** * pm_request_autosuspend - Update the last access time and queue up autosuspend * of a device. * @dev: Target device. * * Update the last access time of a device and queue up a work item to run an * equivalent pm_runtime_autosuspend() for @dev asynchronously. * * Return: * * 1: Success; device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. * * -EAGAIN: Runtime PM usage counter non-zero or Runtime PM status change * ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. */static inline int pm_request_autosuspend(struct device *dev){ pm_runtime_mark_last_busy(dev); return __pm_runtime_suspend(dev, RPM_ASYNC | RPM_AUTO);}
/** * pm_runtime_get - Bump up usage counter and queue up resume of a device. * @dev: Target device. * * Bump up the runtime PM usage counter of @dev and queue up a work item to * carry out runtime-resume of it. */static inline int pm_runtime_get(struct device *dev){ return __pm_runtime_resume(dev, RPM_GET_PUT | RPM_ASYNC);}
/** * pm_runtime_get_sync - Bump up usage counter of a device and resume it. * @dev: Target device. * * Bump up the runtime PM usage counter of @dev and carry out runtime-resume of * it synchronously. * * The possible return values of this function are the same as for * pm_runtime_resume() and the runtime PM usage counter of @dev remains * incremented in all cases, even if it returns an error code. * Consider using pm_runtime_resume_and_get() instead of it, especially * if its return value is checked by the caller, as this is likely to result * in cleaner code. */static inline int pm_runtime_get_sync(struct device *dev){ return __pm_runtime_resume(dev, RPM_GET_PUT);}
static inline int pm_runtime_get_active(struct device *dev, int rpmflags){ int ret;
ret = __pm_runtime_resume(dev, RPM_GET_PUT | rpmflags); if (ret < 0) { pm_runtime_put_noidle(dev); return ret; }
return 0;}
/** * pm_runtime_resume_and_get - Bump up usage counter of a device and resume it. * @dev: Target device. * * Resume @dev synchronously and if that is successful, increment its runtime * PM usage counter. Return 0 if the runtime PM usage counter of @dev has been * incremented or a negative error code otherwise. */static inline int pm_runtime_resume_and_get(struct device *dev){ return pm_runtime_get_active(dev, 0);}
/** * pm_runtime_put - Drop device usage counter and queue up "idle check" if 0. * @dev: Target device. * * Decrement the runtime PM usage counter of @dev and if it turns out to be * equal to 0, queue up a work item for @dev like in pm_request_idle(). */static inline void pm_runtime_put(struct device *dev){ __pm_runtime_idle(dev, RPM_GET_PUT | RPM_ASYNC);}
/** * __pm_runtime_put_autosuspend - Drop device usage counter and queue autosuspend if 0. * @dev: Target device. * * Decrement the runtime PM usage counter of @dev and if it turns out to be * equal to 0, queue up a work item for @dev like in pm_request_autosuspend(). * * Return: * * 1: Success. Usage counter dropped to zero, but device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. * * -EAGAIN: Runtime PM usage counter became non-zero or Runtime PM status * change ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. */static inline int __pm_runtime_put_autosuspend(struct device *dev){ return __pm_runtime_suspend(dev, RPM_GET_PUT | RPM_ASYNC | RPM_AUTO);}
/** * pm_runtime_put_autosuspend - Update the last access time of a device, drop * its usage counter and queue autosuspend if the usage counter becomes 0. * @dev: Target device. * * Update the last access time of @dev, decrement runtime PM usage counter of * @dev and if it turns out to be equal to 0, queue up a work item for @dev like * in pm_request_autosuspend(). * * Return: * * 1: Success. Usage counter dropped to zero, but device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. * * -EAGAIN: Runtime PM usage counter became non-zero or Runtime PM status * change ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. */static inline int pm_runtime_put_autosuspend(struct device *dev){ pm_runtime_mark_last_busy(dev); return __pm_runtime_put_autosuspend(dev);}
DEFINE_GUARD(pm_runtime_noresume, struct device *, pm_runtime_get_noresume(_T), pm_runtime_put_noidle(_T));
DEFINE_GUARD(pm_runtime_active, struct device *, pm_runtime_get_sync(_T), pm_runtime_put(_T));DEFINE_GUARD(pm_runtime_active_auto, struct device *, pm_runtime_get_sync(_T), pm_runtime_put_autosuspend(_T));/* * Use the following guards with ACQUIRE()/ACQUIRE_ERR(). * * The difference between the "_try" and "_try_enabled" variants is that the * former do not produce an error when runtime PM is disabled for the given * device. */DEFINE_GUARD_COND(pm_runtime_active, _try, pm_runtime_get_active(_T, RPM_TRANSPARENT), _RET == 0)DEFINE_GUARD_COND(pm_runtime_active, _try_enabled, pm_runtime_resume_and_get(_T), _RET == 0)DEFINE_GUARD_COND(pm_runtime_active_auto, _try, pm_runtime_get_active(_T, RPM_TRANSPARENT), _RET == 0)DEFINE_GUARD_COND(pm_runtime_active_auto, _try_enabled, pm_runtime_resume_and_get(_T), _RET == 0)
/* ACQUIRE() wrapper macros for the guards defined above. */
#define PM_RUNTIME_ACQUIRE(_dev, _var) \ ACQUIRE(pm_runtime_active_try, _var)(_dev)
#define PM_RUNTIME_ACQUIRE_AUTOSUSPEND(_dev, _var) \ ACQUIRE(pm_runtime_active_auto_try, _var)(_dev)
#define PM_RUNTIME_ACQUIRE_IF_ENABLED(_dev, _var) \ ACQUIRE(pm_runtime_active_try_enabled, _var)(_dev)
#define PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND(_dev, _var) \ ACQUIRE(pm_runtime_active_auto_try_enabled, _var)(_dev)
/* * ACQUIRE_ERR() wrapper macro for guard pm_runtime_active. * * Always check PM_RUNTIME_ACQUIRE_ERR() after using one of the * PM_RUNTIME_ACQUIRE*() macros defined above (yes, it can be used with * any of them) and if it is nonzero, avoid accessing the given device. */#define PM_RUNTIME_ACQUIRE_ERR(_var_ptr) \ ACQUIRE_ERR(pm_runtime_active, _var_ptr)
/** * pm_runtime_put_sync - Drop device usage counter and run "idle check" if 0. * @dev: Target device. * * Decrement the runtime PM usage counter of @dev and if it turns out to be * equal to 0, invoke the "idle check" callback of @dev and, depending on its * return value, set up autosuspend of @dev or suspend it (depending on whether * or not autosuspend has been enabled for it). * * The runtime PM usage counter of @dev remains decremented in all cases, even * if it returns an error code. * * Return: * * 1: Success. Usage counter dropped to zero, but device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. * * -EAGAIN: Runtime PM usage counter became non-zero or Runtime PM status * change ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -ENOSYS: CONFIG_PM not enabled. * Other values and conditions for the above values are possible as returned by * Runtime PM suspend callbacks. */static inline int pm_runtime_put_sync(struct device *dev){ return __pm_runtime_idle(dev, RPM_GET_PUT);}
/** * pm_runtime_put_sync_suspend - Drop device usage counter and suspend if 0. * @dev: Target device. * * Decrement the runtime PM usage counter of @dev and if it turns out to be * equal to 0, carry out runtime-suspend of @dev synchronously. * * The runtime PM usage counter of @dev remains decremented in all cases, even * if it returns an error code. * * Return: * * 1: Success. Usage counter dropped to zero, but device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. * * -EAGAIN: Runtime PM usage counter became non-zero or Runtime PM status * change ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -ENOSYS: CONFIG_PM not enabled. * Other values and conditions for the above values are possible as returned by * Runtime PM suspend callbacks. */static inline int pm_runtime_put_sync_suspend(struct device *dev){ return __pm_runtime_suspend(dev, RPM_GET_PUT);}
/** * pm_runtime_put_sync_autosuspend - Update the last access time of a device, * drop device usage counter and autosuspend if 0. * @dev: Target device. * * Update the last access time of @dev, decrement the runtime PM usage counter * of @dev and if it turns out to be equal to 0, set up autosuspend of @dev or * suspend it synchronously (depending on whether or not autosuspend has been * enabled for it). * * The runtime PM usage counter of @dev remains decremented in all cases, even * if it returns an error code. * * Return: * * 1: Success. Usage counter dropped to zero, but device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. * * -EAGAIN: Runtime PM usage counter became non-zero or Runtime PM status * change ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. * Other values and conditions for the above values are possible as returned by * Runtime PM suspend callbacks. */static inline int pm_runtime_put_sync_autosuspend(struct device *dev){ pm_runtime_mark_last_busy(dev); return __pm_runtime_suspend(dev, RPM_GET_PUT | RPM_AUTO);}
/** * pm_runtime_set_active - Set runtime PM status to "active". * @dev: Target device. * * Set the runtime PM status of @dev to %RPM_ACTIVE and ensure that dependencies * of it will be taken into account. * * It is not valid to call this function for devices with runtime PM enabled. */static inline int pm_runtime_set_active(struct device *dev){ return __pm_runtime_set_status(dev, RPM_ACTIVE);}
/** * pm_runtime_set_suspended - Set runtime PM status to "suspended". * @dev: Target device. * * Set the runtime PM status of @dev to %RPM_SUSPENDED and ensure that * dependencies of it will be taken into account. * * It is not valid to call this function for devices with runtime PM enabled. */static inline int pm_runtime_set_suspended(struct device *dev){ return __pm_runtime_set_status(dev, RPM_SUSPENDED);}
/** * pm_runtime_disable - Disable runtime PM for a device. * @dev: Target device. * * Prevent the runtime PM framework from working with @dev by incrementing its * "disable" counter. * * If the counter is zero when this function runs and there is a pending runtime * resume request for @dev, it will be resumed. If the counter is still zero at * that point, all of the pending runtime PM requests for @dev will be canceled * and all runtime PM operations in progress involving it will be waited for to * complete. * * For each invocation of this function for @dev, there must be a matching * pm_runtime_enable() call, so that runtime PM is eventually enabled for it * again. */static inline void pm_runtime_disable(struct device *dev){ __pm_runtime_disable(dev, true);}
/** * pm_runtime_use_autosuspend - Allow autosuspend to be used for a device. * @dev: Target device. * * Allow the runtime PM autosuspend mechanism to be used for @dev whenever * requested (or "autosuspend" will be handled as direct runtime-suspend for * it). * * NOTE: It's important to undo this with pm_runtime_dont_use_autosuspend() * at driver exit time unless your driver initially enabled pm_runtime * with devm_pm_runtime_enable() (which handles it for you). */static inline void pm_runtime_use_autosuspend(struct device *dev){ __pm_runtime_use_autosuspend(dev, true);}
/** * pm_runtime_dont_use_autosuspend - Prevent autosuspend from being used. * @dev: Target device. * * Prevent the runtime PM autosuspend mechanism from being used for @dev which * means that "autosuspend" will be handled as direct runtime-suspend for it * going forward. */static inline void pm_runtime_dont_use_autosuspend(struct device *dev){ __pm_runtime_use_autosuspend(dev, false);}
#endif