Something went wrong. Try again.
(I'm so sorry!) Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Something went wrong. Try again.
1.5 kB · 40 lines
C
1234567891011121314151617181920212223242526272829303132333435363738394041/* SPDX-License-Identifier: GPL-2.0-only *//* * i2c-gpio interface to platform code * * Copyright (C) 2007 Atmel Corporation */#ifndef _LINUX_I2C_GPIO_H#define _LINUX_I2C_GPIO_H
/** * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz * @timeout: clock stretching timeout in jiffies. If the slave keeps * SCL low for longer than this, the transfer will time out. * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin * isn't actively driven high when setting the output value high. * gpio_get_value() must return the actual pin state even if the * pin is configured as an output. * @sda_is_output_only: SDA output drivers can't be turned off. * This is for clients that can only read SDA/SCL. * @sda_has_no_pullup: SDA is used in a non-compliant way and has no pull-up. * Therefore disable open-drain. * @scl_is_open_drain: SCL is set up as open drain. Same requirements * as for sda_is_open_drain apply. * @scl_is_output_only: SCL output drivers cannot be turned off. * @scl_has_no_pullup: SCL is used in a non-compliant way and has no pull-up. * Therefore disable open-drain. */struct i2c_gpio_platform_data { int udelay; int timeout; unsigned int sda_is_open_drain:1; unsigned int sda_is_output_only:1; unsigned int sda_has_no_pullup:1; unsigned int scl_is_open_drain:1; unsigned int scl_is_output_only:1; unsigned int scl_has_no_pullup:1;};
#endif /* _LINUX_I2C_GPIO_H */