tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1#!/bin/sh
2# SPDX-License-Identifier: GPL-2.0
3#
4# Copyright (c) 2022, 2024 Collabora Ltd
5#
6# This test validates the power supply uAPI: namely, the files in sysfs and
7# lines in uevent that expose the power supply properties.
8#
9# By default all power supplies available are tested. Optionally the name of a
10# power supply can be passed as a parameter to test only that one instead.
11DIR="$(dirname "$(readlink -f "$0")")"
12
13. "${DIR}"/../kselftest/ktap_helpers.sh
14
15. "${DIR}"/helpers.sh
16
17count_tests() {
18 SUPPLIES=$1
19
20 # This needs to be updated every time a new test is added.
21 NUM_TESTS=33
22
23 total_tests=0
24
25 for i in $SUPPLIES; do
26 total_tests=$((total_tests + NUM_TESTS))
27 done
28
29 echo "$total_tests"
30}
31
32ktap_print_header
33
34SYSFS_SUPPLIES=/sys/class/power_supply/
35
36if [ $# -eq 0 ]; then
37 supplies=$(ls "$SYSFS_SUPPLIES")
38else
39 supplies=$1
40fi
41
42ktap_set_plan "$(count_tests "$supplies")"
43
44for DEVNAME in $supplies; do
45 ktap_print_msg Testing device "$DEVNAME"
46
47 if [ ! -d "$SYSFS_SUPPLIES"/"$DEVNAME" ]; then
48 ktap_test_fail "$DEVNAME".exists
49 ktap_exit_fail_msg Device does not exist
50 fi
51
52 ktap_test_pass "$DEVNAME".exists
53
54 test_uevent_prop NAME "$DEVNAME"
55
56 test_sysfs_prop type
57 SUPPLY_TYPE=$(cat "$SYSFS_SUPPLIES"/"$DEVNAME"/type)
58 # This fails on kernels < 5.8 (needs 2ad3d74e3c69f)
59 test_uevent_prop TYPE "$SUPPLY_TYPE"
60
61 test_sysfs_prop_optional usb_type
62
63 test_sysfs_prop_optional_range online 0 2
64 test_sysfs_prop_optional_range present 0 1
65
66 test_sysfs_prop_optional_list status "Unknown","Charging","Discharging","Not charging","Full"
67
68 # Capacity is reported as percentage, thus any value less than 0 and
69 # greater than 100 are not allowed.
70 test_sysfs_prop_optional_range capacity 0 100 "%"
71
72 test_sysfs_prop_optional_list capacity_level "Unknown","Critical","Low","Normal","High","Full"
73
74 test_sysfs_prop_optional model_name
75 test_sysfs_prop_optional manufacturer
76 test_sysfs_prop_optional serial_number
77 test_sysfs_prop_optional_list technology "Unknown","NiMH","Li-ion","Li-poly","LiFe","NiCd","LiMn"
78
79 test_sysfs_prop_optional cycle_count
80
81 test_sysfs_prop_optional_list scope "Unknown","System","Device"
82
83 test_sysfs_prop_optional input_current_limit "uA"
84 test_sysfs_prop_optional input_voltage_limit "uV"
85
86 # Technically the power-supply class does not limit reported values.
87 # E.g. one could expose an RTC backup-battery, which goes below 1.5V or
88 # an electric vehicle battery with over 300V. But most devices do not
89 # have a step-up capable regulator behind the battery and operate with
90 # voltages considered safe to touch, so we limit the allowed range to
91 # 1.8V-60V to catch drivers reporting incorrectly scaled values. E.g. a
92 # common mistake is reporting data in mV instead of µV.
93 test_sysfs_prop_optional_range voltage_now 1800000 60000000 "uV"
94 test_sysfs_prop_optional_range voltage_min 1800000 60000000 "uV"
95 test_sysfs_prop_optional_range voltage_max 1800000 60000000 "uV"
96 test_sysfs_prop_optional_range voltage_min_design 1800000 60000000 "uV"
97 test_sysfs_prop_optional_range voltage_max_design 1800000 60000000 "uV"
98
99 # current based systems
100 test_sysfs_prop_optional current_now "uA"
101 test_sysfs_prop_optional current_max "uA"
102 test_sysfs_prop_optional charge_now "uAh"
103 test_sysfs_prop_optional charge_full "uAh"
104 test_sysfs_prop_optional charge_full_design "uAh"
105
106 # power based systems
107 test_sysfs_prop_optional power_now "uW"
108 test_sysfs_prop_optional energy_now "uWh"
109 test_sysfs_prop_optional energy_full "uWh"
110 test_sysfs_prop_optional energy_full_design "uWh"
111 test_sysfs_prop_optional energy_full_design "uWh"
112done
113
114ktap_finished