tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1#!/bin/bash
2# SPDX-License-Identifier: GPL-2.0
3#
4# This test injects a 10-MB burst of traffic with VLAN tag and 802.1p priority
5# of 1. This stream is consistently prioritized as priority 1, is put to PG
6# buffer 1, and scheduled at TC 1.
7#
8# - the stream first ingresses through $swp1, where it is forwarded to $swp3
9#
10# - then it ingresses through $swp4. Here it is put to a lossless buffer and put
11# to a small pool ("PFC pool"). The traffic is forwarded to $swp2, which is
12# shaped, and thus the PFC pool eventually fills, therefore the headroom
13# fills, and $swp3 is paused.
14#
15# - since $swp3 now can't send traffic, the traffic ingressing $swp1 is kept at
16# a pool ("overflow pool"). The overflow pool needs to be large enough to
17# contain the whole burst.
18#
19# - eventually the PFC pool gets some traffic out, headroom therefore gets some
20# traffic to the pool, and $swp3 is unpaused again. This way the traffic is
21# gradually forwarded from the overflow pool, through the PFC pool, out of
22# $swp2, and eventually to $h2.
23#
24# - if PFC works, all lossless flow packets that ingress through $swp1 should
25# also be seen ingressing $h2. If it doesn't, there will be drops due to
26# discrepancy between the speeds of $swp1 and $h2.
27#
28# - it should all play out relatively quickly, so that SLL and HLL will not
29# cause drops.
30#
31# +-----------------------+
32# | H1 |
33# | + $h1.111 |
34# | | 192.0.2.33/28 |
35# | | |
36# | + $h1 |
37# +---|-------------------+ +--------------------+
38# | | |
39# +---|----------------------|--------------------|---------------------------+
40# | + $swp1 $swp3 + + $swp4 |
41# | | iPOOL1 iPOOL0 | | iPOOL2 |
42# | | ePOOL4 ePOOL5 | | ePOOL4 |
43# | | PFC:enabled=1 | | PFC:enabled=1 |
44# | +-|----------------------|-+ +-|------------------------+ |
45# | | + $swp1.111 $swp3.111 + | | + $swp4.111 | |
46# | | | | | |
47# | | BR1 | | BR2 | |
48# | | | | | |
49# | | | | + $swp2.111 | |
50# | +--------------------------+ +---------|----------------+ |
51# | | |
52# | iPOOL0: 500KB dynamic | |
53# | iPOOL1: 10MB static | |
54# | iPOOL2: 1MB static + $swp2 |
55# | ePOOL4: 500KB dynamic | iPOOL0 |
56# | ePOOL5: 10MB static | ePOOL6 |
57# | ePOOL6: "infinite" static | 200Mbps shaper |
58# +-------------------------------------------------------|-------------------+
59# |
60# +---|-------------------+
61# | + $h2 H2 |
62# | | |
63# | + $h2.111 |
64# | 192.0.2.34/28 |
65# +-----------------------+
66#
67# iPOOL0+ePOOL4 is a helper pool for control traffic etc.
68# iPOOL1+ePOOL5 are overflow pools.
69# iPOOL2+ePOOL6 are PFC pools.
70
71ALL_TESTS="
72 ping_ipv4
73 test_qos_pfc
74"
75
76lib_dir=$(dirname $0)/../../../net/forwarding
77
78NUM_NETIFS=6
79source $lib_dir/lib.sh
80source $lib_dir/devlink_lib.sh
81
82_1KB=1000
83_100KB=$((100 * _1KB))
84_500KB=$((500 * _1KB))
85_1MB=$((1000 * _1KB))
86_10MB=$((10 * _1MB))
87
88h1_create()
89{
90 simple_if_init $h1
91 mtu_set $h1 10000
92
93 vlan_create $h1 111 v$h1 192.0.2.33/28
94}
95
96h1_destroy()
97{
98 vlan_destroy $h1 111
99
100 mtu_restore $h1
101 simple_if_fini $h1
102}
103
104h2_create()
105{
106 simple_if_init $h2
107 mtu_set $h2 10000
108
109 vlan_create $h2 111 v$h2 192.0.2.34/28
110}
111
112h2_destroy()
113{
114 vlan_destroy $h2 111
115
116 mtu_restore $h2
117 simple_if_fini $h2
118}
119
120switch_create()
121{
122 local lanes_swp4
123 local pg1_size
124
125 # pools
126 # -----
127
128 devlink_pool_size_thtype_save 0
129 devlink_pool_size_thtype_save 4
130 devlink_pool_size_thtype_save 1
131 devlink_pool_size_thtype_save 5
132 devlink_pool_size_thtype_save 2
133 devlink_pool_size_thtype_save 6
134
135 devlink_port_pool_th_save $swp1 1
136 devlink_port_pool_th_save $swp2 6
137 devlink_port_pool_th_save $swp3 5
138 devlink_port_pool_th_save $swp4 2
139
140 devlink_tc_bind_pool_th_save $swp1 1 ingress
141 devlink_tc_bind_pool_th_save $swp2 1 egress
142 devlink_tc_bind_pool_th_save $swp3 1 egress
143 devlink_tc_bind_pool_th_save $swp4 1 ingress
144
145 # Control traffic pools. Just reduce the size. Keep them dynamic so that
146 # we don't need to change all the uninteresting quotas.
147 devlink_pool_size_thtype_set 0 dynamic $_500KB
148 devlink_pool_size_thtype_set 4 dynamic $_500KB
149
150 # Overflow pools.
151 devlink_pool_size_thtype_set 1 static $_10MB
152 devlink_pool_size_thtype_set 5 static $_10MB
153
154 # PFC pools. As per the writ, the size of egress PFC pool should be
155 # infinice, but actually it just needs to be large enough to not matter
156 # in practice, so reuse the 10MB limit.
157 devlink_pool_size_thtype_set 2 static $_1MB
158 devlink_pool_size_thtype_set 6 static $_10MB
159
160 # $swp1
161 # -----
162
163 ip link set dev $swp1 up
164 mtu_set $swp1 10000
165 vlan_create $swp1 111
166 ip link set dev $swp1.111 type vlan ingress-qos-map 0:0 1:1
167
168 devlink_port_pool_th_set $swp1 1 $_10MB
169 devlink_tc_bind_pool_th_set $swp1 1 ingress 1 $_10MB
170
171 # Configure qdisc so that we can configure PG and therefore pool
172 # assignment.
173 tc qdisc replace dev $swp1 root handle 1: \
174 ets bands 8 strict 8 priomap 7 6
175 dcb buffer set dev $swp1 prio-buffer all:0 1:1
176
177 # $swp2
178 # -----
179
180 ip link set dev $swp2 up
181 mtu_set $swp2 10000
182 vlan_create $swp2 111
183 ip link set dev $swp2.111 type vlan egress-qos-map 0:0 1:1
184
185 devlink_port_pool_th_set $swp2 6 $_10MB
186 devlink_tc_bind_pool_th_set $swp2 1 egress 6 $_10MB
187
188 # prio 0->TC0 (band 7), 1->TC1 (band 6). TC1 is shaped.
189 tc qdisc replace dev $swp2 root handle 1: \
190 ets bands 8 strict 8 priomap 7 6
191 tc qdisc replace dev $swp2 parent 1:7 handle 17: \
192 tbf rate 200Mbit burst 131072 limit 1M
193
194 # $swp3
195 # -----
196
197 ip link set dev $swp3 up
198 mtu_set $swp3 10000
199 vlan_create $swp3 111
200 ip link set dev $swp3.111 type vlan egress-qos-map 0:0 1:1
201
202 devlink_port_pool_th_set $swp3 5 $_10MB
203 devlink_tc_bind_pool_th_set $swp3 1 egress 5 $_10MB
204
205 # prio 0->TC0 (band 7), 1->TC1 (band 6)
206 tc qdisc replace dev $swp3 root handle 1: \
207 ets bands 8 strict 8 priomap 7 6
208
209 # Need to enable PFC so that PAUSE takes effect. Therefore need to put
210 # the lossless prio into a buffer of its own. Don't bother with buffer
211 # sizes though, there is not going to be any pressure in the "backward"
212 # direction.
213 dcb buffer set dev $swp3 prio-buffer all:0 1:1
214 dcb pfc set dev $swp3 prio-pfc all:off 1:on
215
216 # $swp4
217 # -----
218
219 ip link set dev $swp4 up
220 mtu_set $swp4 10000
221 vlan_create $swp4 111
222 ip link set dev $swp4.111 type vlan ingress-qos-map 0:0 1:1
223
224 devlink_port_pool_th_set $swp4 2 $_1MB
225 devlink_tc_bind_pool_th_set $swp4 1 ingress 2 $_1MB
226
227 # Configure qdisc so that we can hand-tune headroom.
228 tc qdisc replace dev $swp4 root handle 1: \
229 ets bands 8 strict 8 priomap 7 6
230 dcb buffer set dev $swp4 prio-buffer all:0 1:1
231 dcb pfc set dev $swp4 prio-pfc all:off 1:on
232 # PG0 will get autoconfigured to Xoff, give PG1 arbitrarily 100K, which
233 # is (-2*MTU) about 80K of delay provision.
234 pg1_size=$_100KB
235
236 setup_wait_dev_with_timeout $swp4
237
238 lanes_swp4=$(ethtool $swp4 | grep 'Lanes:')
239 lanes_swp4=${lanes_swp4#*"Lanes: "}
240
241 # 8-lane ports use two buffers among which the configured buffer
242 # is split, so double the size to get twice (20K + 80K).
243 if [[ $lanes_swp4 -eq 8 ]]; then
244 pg1_size=$((pg1_size * 2))
245 fi
246
247 dcb buffer set dev $swp4 buffer-size all:0 1:$pg1_size
248
249 # bridges
250 # -------
251
252 ip link add name br1 type bridge vlan_filtering 0
253 ip link set dev $swp1.111 master br1
254 ip link set dev $swp3.111 master br1
255 ip link set dev br1 up
256
257 ip link add name br2 type bridge vlan_filtering 0
258 ip link set dev $swp2.111 master br2
259 ip link set dev $swp4.111 master br2
260 ip link set dev br2 up
261}
262
263switch_destroy()
264{
265 # Do this first so that we can reset the limits to values that are only
266 # valid for the original static / dynamic setting.
267 devlink_pool_size_thtype_restore 6
268 devlink_pool_size_thtype_restore 5
269 devlink_pool_size_thtype_restore 4
270 devlink_pool_size_thtype_restore 2
271 devlink_pool_size_thtype_restore 1
272 devlink_pool_size_thtype_restore 0
273
274 # bridges
275 # -------
276
277 ip link set dev br2 down
278 ip link set dev $swp4.111 nomaster
279 ip link set dev $swp2.111 nomaster
280 ip link del dev br2
281
282 ip link set dev br1 down
283 ip link set dev $swp3.111 nomaster
284 ip link set dev $swp1.111 nomaster
285 ip link del dev br1
286
287 # $swp4
288 # -----
289
290 dcb buffer set dev $swp4 buffer-size all:0
291 dcb pfc set dev $swp4 prio-pfc all:off
292 dcb buffer set dev $swp4 prio-buffer all:0
293 tc qdisc del dev $swp4 root
294
295 devlink_tc_bind_pool_th_restore $swp4 1 ingress
296 devlink_port_pool_th_restore $swp4 2
297
298 vlan_destroy $swp4 111
299 mtu_restore $swp4
300 ip link set dev $swp4 down
301
302 # $swp3
303 # -----
304
305 dcb pfc set dev $swp3 prio-pfc all:off
306 dcb buffer set dev $swp3 prio-buffer all:0
307 tc qdisc del dev $swp3 root
308
309 devlink_tc_bind_pool_th_restore $swp3 1 egress
310 devlink_port_pool_th_restore $swp3 5
311
312 vlan_destroy $swp3 111
313 mtu_restore $swp3
314 ip link set dev $swp3 down
315
316 # $swp2
317 # -----
318
319 tc qdisc del dev $swp2 parent 1:7
320 tc qdisc del dev $swp2 root
321
322 devlink_tc_bind_pool_th_restore $swp2 1 egress
323 devlink_port_pool_th_restore $swp2 6
324
325 vlan_destroy $swp2 111
326 mtu_restore $swp2
327 ip link set dev $swp2 down
328
329 # $swp1
330 # -----
331
332 dcb buffer set dev $swp1 prio-buffer all:0
333 tc qdisc del dev $swp1 root
334
335 devlink_tc_bind_pool_th_restore $swp1 1 ingress
336 devlink_port_pool_th_restore $swp1 1
337
338 vlan_destroy $swp1 111
339 mtu_restore $swp1
340 ip link set dev $swp1 down
341}
342
343setup_prepare()
344{
345 h1=${NETIFS[p1]}
346 swp1=${NETIFS[p2]}
347
348 swp2=${NETIFS[p3]}
349 h2=${NETIFS[p4]}
350
351 swp3=${NETIFS[p5]}
352 swp4=${NETIFS[p6]}
353
354 h2mac=$(mac_get $h2)
355
356 vrf_prepare
357
358 h1_create
359 h2_create
360 switch_create
361}
362
363cleanup()
364{
365 pre_cleanup
366
367 switch_destroy
368 h2_destroy
369 h1_destroy
370
371 vrf_cleanup
372}
373
374ping_ipv4()
375{
376 ping_test $h1 192.0.2.34
377}
378
379test_qos_pfc()
380{
381 RET=0
382
383 # 10M pool, each packet is 8K of payload + headers
384 local pkts=$((_10MB / 8050))
385 local size=$((pkts * 8050))
386 local in0=$(ethtool_stats_get $swp1 rx_octets_prio_1)
387 local out0=$(ethtool_stats_get $swp2 tx_octets_prio_1)
388
389 $MZ $h1 -p 8000 -Q 1:111 -A 192.0.2.33 -B 192.0.2.34 \
390 -a own -b $h2mac -c $pkts -t udp -q
391 sleep 2
392
393 local in1=$(ethtool_stats_get $swp1 rx_octets_prio_1)
394 local out1=$(ethtool_stats_get $swp2 tx_octets_prio_1)
395
396 local din=$((in1 - in0))
397 local dout=$((out1 - out0))
398
399 local pct_in=$((din * 100 / size))
400
401 ((pct_in > 95 && pct_in < 105))
402 check_err $? "Relative ingress out of expected bounds, $pct_in% should be 100%"
403
404 ((dout == din))
405 check_err $? "$((din - dout)) bytes out of $din ingressed got lost"
406
407 log_test "PFC"
408}
409
410bail_on_lldpad "configure DCB" "configure Qdiscs"
411
412trap cleanup EXIT
413setup_prepare
414setup_wait
415tests_run
416
417exit $EXIT_STATUS