Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * linux/include/linux/mmc/core.h
4 */
5#ifndef LINUX_MMC_CORE_H
6#define LINUX_MMC_CORE_H
7
8#include <linux/completion.h>
9#include <linux/types.h>
10
11struct mmc_data;
12struct mmc_request;
13
14#define UHS2_MAX_PAYLOAD_LEN 2
15#define UHS2_MAX_RESP_LEN 20
16
17struct uhs2_command {
18 u16 header;
19 u16 arg;
20 __be32 payload[UHS2_MAX_PAYLOAD_LEN];
21 u8 payload_len;
22 u8 packet_len;
23 u8 tmode_half_duplex;
24 u8 uhs2_resp[UHS2_MAX_RESP_LEN]; /* UHS2 native cmd resp */
25 u8 uhs2_resp_len; /* UHS2 native cmd resp len */
26};
27
28struct mmc_command {
29 u32 opcode;
30 u32 arg;
31#define MMC_CMD23_ARG_REL_WR (1 << 31)
32#define MMC_CMD23_ARG_TAG_REQ (1 << 29)
33 u32 resp[4];
34 unsigned int flags; /* expected response type */
35#define MMC_RSP_PRESENT (1 << 0)
36#define MMC_RSP_136 (1 << 1) /* 136 bit response */
37#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
38#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
39#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
40
41#define MMC_CMD_MASK (3 << 5) /* non-SPI command type */
42#define MMC_CMD_AC (0 << 5)
43#define MMC_CMD_ADTC (1 << 5)
44#define MMC_CMD_BC (2 << 5)
45#define MMC_CMD_BCR (3 << 5)
46
47#define MMC_RSP_SPI_S1 (1 << 7) /* one status byte */
48#define MMC_RSP_SPI_S2 (1 << 8) /* second byte */
49#define MMC_RSP_SPI_B4 (1 << 9) /* four data bytes */
50#define MMC_RSP_SPI_BUSY (1 << 10) /* card may send busy */
51
52/*
53 * These are the native response types, and correspond to valid bit
54 * patterns of the above flags. One additional valid pattern
55 * is all zeros, which means we don't expect a response.
56 */
57#define MMC_RSP_NONE (0)
58#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
59#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
60#define MMC_RSP_R1B_NO_CRC (MMC_RSP_PRESENT|MMC_RSP_OPCODE|MMC_RSP_BUSY)
61#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
62#define MMC_RSP_R3 (MMC_RSP_PRESENT)
63#define MMC_RSP_R4 (MMC_RSP_PRESENT)
64#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
65#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
66#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
67
68#define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
69
70/*
71 * These are the SPI response types for MMC, SD, and SDIO cards.
72 * Commands return R1, with maybe more info. Zero is an error type;
73 * callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
74 */
75#define MMC_RSP_SPI_R1 (MMC_RSP_SPI_S1)
76#define MMC_RSP_SPI_R1B (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
77#define MMC_RSP_SPI_R2 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
78#define MMC_RSP_SPI_R3 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
79#define MMC_RSP_SPI_R4 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
80#define MMC_RSP_SPI_R5 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
81#define MMC_RSP_SPI_R7 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
82
83#define mmc_spi_resp_type(cmd) ((cmd)->flags & \
84 (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4))
85
86/*
87 * These are the command types.
88 */
89#define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_MASK)
90
91 unsigned int retries; /* max number of retries */
92 int error; /* command error */
93
94/*
95 * Standard errno values are used for errors, but some have specific
96 * meaning in the MMC layer:
97 *
98 * ETIMEDOUT Card took too long to respond
99 * EILSEQ Basic format problem with the received or sent data
100 * (e.g. CRC check failed, incorrect opcode in response
101 * or bad end bit)
102 * EINVAL Request cannot be performed because of restrictions
103 * in hardware and/or the driver
104 * ENOMEDIUM Host can determine that the slot is empty and is
105 * actively failing requests
106 */
107
108 unsigned int busy_timeout; /* busy detect timeout in ms */
109 struct mmc_data *data; /* data segment associated with cmd */
110 struct mmc_request *mrq; /* associated request */
111
112 struct uhs2_command *uhs2_cmd; /* UHS2 command */
113
114 /* for SDUC */
115 bool has_ext_addr;
116 u8 ext_addr;
117};
118
119struct mmc_data {
120 unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */
121 unsigned int timeout_clks; /* data timeout (in clocks) */
122 unsigned int blksz; /* data block size */
123 unsigned int blocks; /* number of blocks */
124 unsigned int blk_addr; /* block address */
125 int error; /* data error */
126 unsigned int flags;
127
128#define MMC_DATA_WRITE BIT(8)
129#define MMC_DATA_READ BIT(9)
130/* Extra flags used by CQE */
131#define MMC_DATA_QBR BIT(10) /* CQE queue barrier*/
132#define MMC_DATA_PRIO BIT(11) /* CQE high priority */
133#define MMC_DATA_REL_WR BIT(12) /* Reliable write */
134#define MMC_DATA_DAT_TAG BIT(13) /* Tag request */
135#define MMC_DATA_FORCED_PRG BIT(14) /* Forced programming */
136
137 unsigned int bytes_xfered;
138
139 struct mmc_command *stop; /* stop command */
140 struct mmc_request *mrq; /* associated request */
141
142 unsigned int sg_len; /* size of scatter list */
143 int sg_count; /* mapped sg entries */
144 struct scatterlist *sg; /* I/O scatter list */
145 s32 host_cookie; /* host private data */
146};
147
148struct mmc_host;
149struct mmc_request {
150 struct mmc_command *sbc; /* SET_BLOCK_COUNT for multiblock */
151 struct mmc_command *cmd;
152 struct mmc_data *data;
153 struct mmc_command *stop;
154
155 struct completion completion;
156 struct completion cmd_completion;
157 void (*done)(struct mmc_request *);/* completion function */
158 /*
159 * Notify uppers layers (e.g. mmc block driver) that recovery is needed
160 * due to an error associated with the mmc_request. Currently used only
161 * by CQE.
162 */
163 void (*recovery_notifier)(struct mmc_request *);
164 struct mmc_host *host;
165
166 /* Allow other commands during this ongoing data transfer or busy wait */
167 bool cap_cmd_during_tfr;
168
169 int tag;
170
171#ifdef CONFIG_MMC_CRYPTO
172 const struct bio_crypt_ctx *crypto_ctx;
173 int crypto_key_slot;
174#endif
175 struct uhs2_command uhs2_cmd;
176};
177
178struct mmc_card;
179
180void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq);
181int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd,
182 int retries);
183
184int mmc_hw_reset(struct mmc_card *card);
185int mmc_sw_reset(struct mmc_card *card);
186void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card);
187
188#endif /* LINUX_MMC_CORE_H */