tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1# SPDX-License-Identifier: GPL-2.0-only
2menu "Distributed Switch Architecture drivers"
3 depends on NET_DSA
4
5source "drivers/net/dsa/b53/Kconfig"
6
7config NET_DSA_BCM_SF2
8 tristate "Broadcom Starfighter 2 Ethernet switch support"
9 depends on HAS_IOMEM
10 select NET_DSA_TAG_BRCM
11 select FIXED_PHY
12 select BCM7XXX_PHY
13 select MDIO_BCM_UNIMAC
14 select B53
15 help
16 This enables support for the Broadcom Starfighter 2 Ethernet
17 switch chips.
18
19config NET_DSA_LOOP
20 tristate "DSA mock-up Ethernet switch chip support"
21 select NET_DSA_TAG_NONE
22 select FIXED_PHY
23 help
24 This enables support for a fake mock-up switch chip which
25 exercises the DSA APIs.
26
27source "drivers/net/dsa/hirschmann/Kconfig"
28
29source "drivers/net/dsa/lantiq/Kconfig"
30
31config NET_DSA_MT7530
32 tristate "MediaTek MT7530 and MT7531 Ethernet switch support"
33 select NET_DSA_TAG_MTK
34 select REGMAP_IRQ
35 imply NET_DSA_MT7530_MDIO
36 imply NET_DSA_MT7530_MMIO
37 help
38 This enables support for the MediaTek MT7530 and MT7531 Ethernet
39 switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
40 MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are
41 supported as well.
42
43config NET_DSA_MT7530_MDIO
44 tristate "MediaTek MT7530 MDIO interface driver"
45 depends on NET_DSA_MT7530
46 select MEDIATEK_GE_PHY
47 select PCS_MTK_LYNXI
48 help
49 This enables support for the MediaTek MT7530 and MT7531 switch
50 chips which are connected via MDIO, as well as multi-chip
51 module MT7530 which can be found in the MT7621AT, MT7621DAT,
52 MT7621ST and MT7623AI SoCs.
53
54config NET_DSA_MT7530_MMIO
55 tristate "MediaTek MT7530 MMIO interface driver"
56 depends on NET_DSA_MT7530
57 depends on HAS_IOMEM
58 imply MEDIATEK_GE_SOC_PHY
59 help
60 This enables support for the built-in Ethernet switch found
61 in the MediaTek MT7988 SoC.
62 The switch is a similar design as MT7531, but the switch registers
63 are directly mapped into the SoCs register space rather than being
64 accessible via MDIO.
65
66config NET_DSA_MV88E6060
67 tristate "Marvell 88E6060 ethernet switch chip support"
68 select NET_DSA_TAG_TRAILER
69 help
70 This enables support for the Marvell 88E6060 ethernet switch
71 chip.
72
73source "drivers/net/dsa/microchip/Kconfig"
74
75source "drivers/net/dsa/mv88e6xxx/Kconfig"
76
77source "drivers/net/dsa/mxl862xx/Kconfig"
78
79source "drivers/net/dsa/ocelot/Kconfig"
80
81source "drivers/net/dsa/qca/Kconfig"
82
83source "drivers/net/dsa/sja1105/Kconfig"
84
85source "drivers/net/dsa/xrs700x/Kconfig"
86
87source "drivers/net/dsa/realtek/Kconfig"
88
89config NET_DSA_RZN1_A5PSW
90 tristate "Renesas RZ/N1 A5PSW Ethernet switch support"
91 depends on OF && (ARCH_RZN1 || COMPILE_TEST)
92 select NET_DSA_TAG_RZN1_A5PSW
93 select PCS_RZN1_MIIC
94 help
95 This driver supports the A5PSW switch, which is embedded in Renesas
96 RZ/N1 SoC.
97
98config NET_DSA_KS8995
99 tristate "Micrel KS8995 family 5-ports 10/100 Ethernet switches"
100 depends on SPI
101 select NET_DSA_TAG_NONE
102 help
103 This driver supports the Micrel KS8995 family of 10/100 Mbit ethernet
104 switches, managed over SPI.
105
106config NET_DSA_SMSC_LAN9303
107 tristate
108 select NET_DSA_TAG_LAN9303
109 select REGMAP
110 imply SMSC_PHY
111 help
112 This enables support for the Microchip LAN9303/LAN9354 3 port ethernet
113 switch chips.
114
115config NET_DSA_SMSC_LAN9303_I2C
116 tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"
117 depends on I2C
118 depends on VLAN_8021Q || VLAN_8021Q=n
119 select NET_DSA_SMSC_LAN9303
120 select REGMAP_I2C
121 help
122 Enable access functions if the SMSC/Microchip LAN9303 is configured
123 for I2C managed mode.
124
125config NET_DSA_SMSC_LAN9303_MDIO
126 tristate "Microchip LAN9303/LAN9354 3-ports 10/100 ethernet switch in MDIO managed mode"
127 select NET_DSA_SMSC_LAN9303
128 depends on VLAN_8021Q || VLAN_8021Q=n
129 help
130 Enable access functions if the Microchip LAN9303/LAN9354 is configured
131 for MDIO managed mode.
132
133config NET_DSA_VITESSE_VSC73XX
134 tristate
135 select NET_DSA_TAG_VSC73XX_8021Q
136 select FIXED_PHY
137 select VITESSE_PHY
138 select GPIOLIB
139 help
140 This enables support for the Vitesse VSC7385, VSC7388,
141 VSC7395 and VSC7398 SparX integrated ethernet switches.
142
143config NET_DSA_VITESSE_VSC73XX_SPI
144 tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
145 depends on SPI
146 select NET_DSA_VITESSE_VSC73XX
147 help
148 This enables support for the Vitesse VSC7385, VSC7388, VSC7395
149 and VSC7398 SparX integrated ethernet switches in SPI managed mode.
150
151config NET_DSA_VITESSE_VSC73XX_PLATFORM
152 tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
153 depends on HAS_IOMEM
154 select NET_DSA_VITESSE_VSC73XX
155 help
156 This enables support for the Vitesse VSC7385, VSC7388, VSC7395
157 and VSC7398 SparX integrated ethernet switches, connected over
158 a CPU-attached address bus and work in memory-mapped I/O mode.
159
160config NET_DSA_YT921X
161 tristate "Motorcomm YT9215 ethernet switch chip support"
162 select NET_DSA_TAG_YT921X
163 select NET_IEEE8021Q_HELPERS if DCB
164 help
165 This enables support for the Motorcomm YT9215 ethernet switch
166 chip.
167endmenu