tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Broadcom's BCM63138 LEDs controller
8
9maintainers:
10 - Rafał Miłecki <rafal@milecki.pl>
11
12description: |
13 This LEDs controller was first used on BCM63138 and later reused on BCM4908,
14 BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs.
15
16 It supports up to 32 LEDs that can be connected parallelly or serially. It
17 also includes limited support for hardware blinking.
18
19 Binding serially connected LEDs isn't documented yet.
20
21properties:
22 compatible:
23 oneOf:
24 - items:
25 - enum:
26 - brcm,bcm4908-leds
27 - brcm,bcm6848-leds
28 - brcm,bcm6858-leds
29 - brcm,bcm63148-leds
30 - brcm,bcm63381-leds
31 - brcm,bcm68360-leds
32 - const: brcm,bcm63138-leds
33 - const: brcm,bcm63138-leds
34
35 reg:
36 maxItems: 1
37
38 "#address-cells":
39 const: 1
40
41 "#size-cells":
42 const: 0
43
44 brcm,serial-shift-bits:
45 minimum: 1
46 maximum: 32
47 description:
48 This describes the number of 8-bit serial shifters connected to the LED
49 controller block. The hardware is typically using 8-bit shift registers
50 with 8 LEDs per shift register, so 4 shifters results in 32 LEDs or 2
51 shifters give 16 LEDs etc, but the hardware supports any odd number of
52 registers. If left unspecified, the hardware boot-time default is used.
53
54patternProperties:
55 "^led@[a-f0-9]+$":
56 type: object
57
58 $ref: common.yaml#
59
60 properties:
61 reg:
62 maxItems: 1
63 description: LED pin number
64
65 required:
66 - reg
67
68 unevaluatedProperties: false
69
70required:
71 - reg
72 - "#address-cells"
73 - "#size-cells"
74
75additionalProperties: false
76
77examples:
78 - |
79 #include <dt-bindings/leds/common.h>
80
81 leds@ff800800 {
82 compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
83 reg = <0xff800800 0xdc>;
84 brcm,serial-shift-bits = <16>;
85
86 #address-cells = <1>;
87 #size-cells = <0>;
88
89 led@0 {
90 reg = <0x0>;
91 function = LED_FUNCTION_POWER;
92 color = <LED_COLOR_ID_GREEN>;
93 default-state = "on";
94 };
95
96 led@3 {
97 reg = <0x3>;
98 function = LED_FUNCTION_STATUS;
99 color = <LED_COLOR_ID_GREEN>;
100 active-low;
101 };
102 };