1/* 2 * include/linux/topology.h 3 * 4 * Written by: Matthew Dobson, IBM Corporation 5 * 6 * Copyright (C) 2002, IBM Corp. 7 * 8 * All rights reserved. 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, but 16 * WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 18 * NON INFRINGEMENT. See the GNU General Public License for more 19 * details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 24 * 25 * Send feedback to <colpatch@us.ibm.com> 26 */ 27#ifndef _LINUX_TOPOLOGY_H 28#define _LINUX_TOPOLOGY_H 29 30#include <linux/cpumask.h> 31#include <linux/bitops.h> 32#include <linux/mmzone.h> 33#include <linux/smp.h> 34#include <asm/topology.h> 35 36#ifndef node_has_online_mem 37#define node_has_online_mem(nid) (1) 38#endif 39 40#ifndef nr_cpus_node 41#define nr_cpus_node(node) \ 42 ({ \ 43 cpumask_t __tmp__; \ 44 __tmp__ = node_to_cpumask(node); \ 45 cpus_weight(__tmp__); \ 46 }) 47#endif 48 49#define for_each_node_with_cpus(node) \ 50 for_each_online_node(node) \ 51 if (nr_cpus_node(node)) 52 53/* Conform to ACPI 2.0 SLIT distance definitions */ 54#define LOCAL_DISTANCE 10 55#define REMOTE_DISTANCE 20 56#ifndef node_distance 57#define node_distance(from,to) ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE) 58#endif 59#ifndef RECLAIM_DISTANCE 60/* 61 * If the distance between nodes in a system is larger than RECLAIM_DISTANCE 62 * (in whatever arch specific measurement units returned by node_distance()) 63 * then switch on zone reclaim on boot. 64 */ 65#define RECLAIM_DISTANCE 20 66#endif 67#ifndef PENALTY_FOR_NODE_WITH_CPUS 68#define PENALTY_FOR_NODE_WITH_CPUS (1) 69#endif 70 71/* 72 * Below are the 3 major initializers used in building sched_domains: 73 * SD_SIBLING_INIT, for SMT domains 74 * SD_CPU_INIT, for SMP domains 75 * SD_NODE_INIT, for NUMA domains 76 * 77 * Any architecture that cares to do any tuning to these values should do so 78 * by defining their own arch-specific initializer in include/asm/topology.h. 79 * A definition there will automagically override these default initializers 80 * and allow arch-specific performance tuning of sched_domains. 81 */ 82#ifdef CONFIG_SCHED_SMT 83/* MCD - Do we really need this? It is always on if CONFIG_SCHED_SMT is, 84 * so can't we drop this in favor of CONFIG_SCHED_SMT? 85 */ 86#define ARCH_HAS_SCHED_WAKE_IDLE 87/* Common values for SMT siblings */ 88#ifndef SD_SIBLING_INIT 89#define SD_SIBLING_INIT (struct sched_domain) { \ 90 .span = CPU_MASK_NONE, \ 91 .parent = NULL, \ 92 .child = NULL, \ 93 .groups = NULL, \ 94 .min_interval = 1, \ 95 .max_interval = 2, \ 96 .busy_factor = 64, \ 97 .imbalance_pct = 110, \ 98 .cache_nice_tries = 0, \ 99 .busy_idx = 0, \ 100 .idle_idx = 0, \ 101 .newidle_idx = 0, \ 102 .wake_idx = 0, \ 103 .forkexec_idx = 0, \ 104 .flags = SD_LOAD_BALANCE \ 105 | SD_BALANCE_NEWIDLE \ 106 | SD_BALANCE_FORK \ 107 | SD_BALANCE_EXEC \ 108 | SD_WAKE_AFFINE \ 109 | SD_WAKE_IDLE \ 110 | SD_SHARE_CPUPOWER, \ 111 .last_balance = jiffies, \ 112 .balance_interval = 1, \ 113 .nr_balance_failed = 0, \ 114} 115#endif 116#endif /* CONFIG_SCHED_SMT */ 117 118#ifdef CONFIG_SCHED_MC 119/* Common values for MC siblings. for now mostly derived from SD_CPU_INIT */ 120#ifndef SD_MC_INIT 121#define SD_MC_INIT (struct sched_domain) { \ 122 .span = CPU_MASK_NONE, \ 123 .parent = NULL, \ 124 .child = NULL, \ 125 .groups = NULL, \ 126 .min_interval = 1, \ 127 .max_interval = 4, \ 128 .busy_factor = 64, \ 129 .imbalance_pct = 125, \ 130 .cache_nice_tries = 1, \ 131 .busy_idx = 2, \ 132 .idle_idx = 0, \ 133 .newidle_idx = 0, \ 134 .wake_idx = 1, \ 135 .forkexec_idx = 1, \ 136 .flags = SD_LOAD_BALANCE \ 137 | SD_BALANCE_NEWIDLE \ 138 | SD_BALANCE_FORK \ 139 | SD_BALANCE_EXEC \ 140 | SD_WAKE_AFFINE \ 141 | SD_WAKE_IDLE \ 142 | SD_SHARE_PKG_RESOURCES\ 143 | BALANCE_FOR_MC_POWER, \ 144 .last_balance = jiffies, \ 145 .balance_interval = 1, \ 146 .nr_balance_failed = 0, \ 147} 148#endif 149#endif /* CONFIG_SCHED_MC */ 150 151/* Common values for CPUs */ 152#ifndef SD_CPU_INIT 153#define SD_CPU_INIT (struct sched_domain) { \ 154 .span = CPU_MASK_NONE, \ 155 .parent = NULL, \ 156 .child = NULL, \ 157 .groups = NULL, \ 158 .min_interval = 1, \ 159 .max_interval = 4, \ 160 .busy_factor = 64, \ 161 .imbalance_pct = 125, \ 162 .cache_nice_tries = 1, \ 163 .busy_idx = 2, \ 164 .idle_idx = 1, \ 165 .newidle_idx = 2, \ 166 .wake_idx = 1, \ 167 .forkexec_idx = 1, \ 168 .flags = SD_LOAD_BALANCE \ 169 | SD_BALANCE_NEWIDLE \ 170 | SD_BALANCE_FORK \ 171 | SD_BALANCE_EXEC \ 172 | SD_WAKE_AFFINE \ 173 | BALANCE_FOR_PKG_POWER,\ 174 .last_balance = jiffies, \ 175 .balance_interval = 1, \ 176 .nr_balance_failed = 0, \ 177} 178#endif 179 180/* sched_domains SD_ALLNODES_INIT for NUMA machines */ 181#define SD_ALLNODES_INIT (struct sched_domain) { \ 182 .span = CPU_MASK_NONE, \ 183 .parent = NULL, \ 184 .child = NULL, \ 185 .groups = NULL, \ 186 .min_interval = 64, \ 187 .max_interval = 64*num_online_cpus(), \ 188 .busy_factor = 128, \ 189 .imbalance_pct = 133, \ 190 .cache_nice_tries = 1, \ 191 .busy_idx = 3, \ 192 .idle_idx = 3, \ 193 .newidle_idx = 0, /* unused */ \ 194 .wake_idx = 0, /* unused */ \ 195 .forkexec_idx = 0, /* unused */ \ 196 .flags = SD_LOAD_BALANCE \ 197 | SD_SERIALIZE, \ 198 .last_balance = jiffies, \ 199 .balance_interval = 64, \ 200 .nr_balance_failed = 0, \ 201} 202 203#ifdef CONFIG_NUMA 204#ifndef SD_NODE_INIT 205#error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!! 206#endif 207#endif /* CONFIG_NUMA */ 208 209#endif /* _LINUX_TOPOLOGY_H */