Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at c9a28fa7b9ac19b676deefa0a171ce7df8755c08 2606 lines 72 kB view raw
1/* 2 * Network device driver for Cell Processor-Based Blade and Celleb platform 3 * 4 * (C) Copyright IBM Corp. 2005 5 * (C) Copyright 2006 TOSHIBA CORPORATION 6 * 7 * Authors : Utz Bacher <utz.bacher@de.ibm.com> 8 * Jens Osterkamp <Jens.Osterkamp@de.ibm.com> 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2, or (at your option) 13 * any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 23 */ 24 25#include <linux/compiler.h> 26#include <linux/crc32.h> 27#include <linux/delay.h> 28#include <linux/etherdevice.h> 29#include <linux/ethtool.h> 30#include <linux/firmware.h> 31#include <linux/if_vlan.h> 32#include <linux/in.h> 33#include <linux/init.h> 34#include <linux/ioport.h> 35#include <linux/ip.h> 36#include <linux/kernel.h> 37#include <linux/mii.h> 38#include <linux/module.h> 39#include <linux/netdevice.h> 40#include <linux/device.h> 41#include <linux/pci.h> 42#include <linux/skbuff.h> 43#include <linux/slab.h> 44#include <linux/tcp.h> 45#include <linux/types.h> 46#include <linux/vmalloc.h> 47#include <linux/wait.h> 48#include <linux/workqueue.h> 49#include <linux/bitops.h> 50#include <asm/pci-bridge.h> 51#include <net/checksum.h> 52 53#include "spider_net.h" 54 55MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \ 56 "<Jens.Osterkamp@de.ibm.com>"); 57MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver"); 58MODULE_LICENSE("GPL"); 59MODULE_VERSION(VERSION); 60 61static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT; 62static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT; 63 64module_param(rx_descriptors, int, 0444); 65module_param(tx_descriptors, int, 0444); 66 67MODULE_PARM_DESC(rx_descriptors, "number of descriptors used " \ 68 "in rx chains"); 69MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \ 70 "in tx chain"); 71 72char spider_net_driver_name[] = "spidernet"; 73 74static struct pci_device_id spider_net_pci_tbl[] = { 75 { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET, 76 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, 77 { 0, } 78}; 79 80MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl); 81 82/** 83 * spider_net_read_reg - reads an SMMIO register of a card 84 * @card: device structure 85 * @reg: register to read from 86 * 87 * returns the content of the specified SMMIO register. 88 */ 89static inline u32 90spider_net_read_reg(struct spider_net_card *card, u32 reg) 91{ 92 /* We use the powerpc specific variants instead of readl_be() because 93 * we know spidernet is not a real PCI device and we can thus avoid the 94 * performance hit caused by the PCI workarounds. 95 */ 96 return in_be32(card->regs + reg); 97} 98 99/** 100 * spider_net_write_reg - writes to an SMMIO register of a card 101 * @card: device structure 102 * @reg: register to write to 103 * @value: value to write into the specified SMMIO register 104 */ 105static inline void 106spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value) 107{ 108 /* We use the powerpc specific variants instead of writel_be() because 109 * we know spidernet is not a real PCI device and we can thus avoid the 110 * performance hit caused by the PCI workarounds. 111 */ 112 out_be32(card->regs + reg, value); 113} 114 115/** spider_net_write_phy - write to phy register 116 * @netdev: adapter to be written to 117 * @mii_id: id of MII 118 * @reg: PHY register 119 * @val: value to be written to phy register 120 * 121 * spider_net_write_phy_register writes to an arbitrary PHY 122 * register via the spider GPCWOPCMD register. We assume the queue does 123 * not run full (not more than 15 commands outstanding). 124 **/ 125static void 126spider_net_write_phy(struct net_device *netdev, int mii_id, 127 int reg, int val) 128{ 129 struct spider_net_card *card = netdev_priv(netdev); 130 u32 writevalue; 131 132 writevalue = ((u32)mii_id << 21) | 133 ((u32)reg << 16) | ((u32)val); 134 135 spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue); 136} 137 138/** spider_net_read_phy - read from phy register 139 * @netdev: network device to be read from 140 * @mii_id: id of MII 141 * @reg: PHY register 142 * 143 * Returns value read from PHY register 144 * 145 * spider_net_write_phy reads from an arbitrary PHY 146 * register via the spider GPCROPCMD register 147 **/ 148static int 149spider_net_read_phy(struct net_device *netdev, int mii_id, int reg) 150{ 151 struct spider_net_card *card = netdev_priv(netdev); 152 u32 readvalue; 153 154 readvalue = ((u32)mii_id << 21) | ((u32)reg << 16); 155 spider_net_write_reg(card, SPIDER_NET_GPCROPCMD, readvalue); 156 157 /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT 158 * interrupt, as we poll for the completion of the read operation 159 * in spider_net_read_phy. Should take about 50 us */ 160 do { 161 readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD); 162 } while (readvalue & SPIDER_NET_GPREXEC); 163 164 readvalue &= SPIDER_NET_GPRDAT_MASK; 165 166 return readvalue; 167} 168 169/** 170 * spider_net_setup_aneg - initial auto-negotiation setup 171 * @card: device structure 172 **/ 173static void 174spider_net_setup_aneg(struct spider_net_card *card) 175{ 176 struct mii_phy *phy = &card->phy; 177 u32 advertise = 0; 178 u16 bmsr, estat; 179 180 bmsr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR); 181 estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS); 182 183 if (bmsr & BMSR_10HALF) 184 advertise |= ADVERTISED_10baseT_Half; 185 if (bmsr & BMSR_10FULL) 186 advertise |= ADVERTISED_10baseT_Full; 187 if (bmsr & BMSR_100HALF) 188 advertise |= ADVERTISED_100baseT_Half; 189 if (bmsr & BMSR_100FULL) 190 advertise |= ADVERTISED_100baseT_Full; 191 192 if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_TFULL)) 193 advertise |= SUPPORTED_1000baseT_Full; 194 if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_THALF)) 195 advertise |= SUPPORTED_1000baseT_Half; 196 197 mii_phy_probe(phy, phy->mii_id); 198 phy->def->ops->setup_aneg(phy, advertise); 199 200} 201 202/** 203 * spider_net_rx_irq_off - switch off rx irq on this spider card 204 * @card: device structure 205 * 206 * switches off rx irq by masking them out in the GHIINTnMSK register 207 */ 208static void 209spider_net_rx_irq_off(struct spider_net_card *card) 210{ 211 u32 regvalue; 212 213 regvalue = SPIDER_NET_INT0_MASK_VALUE & (~SPIDER_NET_RXINT); 214 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue); 215} 216 217/** 218 * spider_net_rx_irq_on - switch on rx irq on this spider card 219 * @card: device structure 220 * 221 * switches on rx irq by enabling them in the GHIINTnMSK register 222 */ 223static void 224spider_net_rx_irq_on(struct spider_net_card *card) 225{ 226 u32 regvalue; 227 228 regvalue = SPIDER_NET_INT0_MASK_VALUE | SPIDER_NET_RXINT; 229 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue); 230} 231 232/** 233 * spider_net_set_promisc - sets the unicast address or the promiscuous mode 234 * @card: card structure 235 * 236 * spider_net_set_promisc sets the unicast destination address filter and 237 * thus either allows for non-promisc mode or promisc mode 238 */ 239static void 240spider_net_set_promisc(struct spider_net_card *card) 241{ 242 u32 macu, macl; 243 struct net_device *netdev = card->netdev; 244 245 if (netdev->flags & IFF_PROMISC) { 246 /* clear destination entry 0 */ 247 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, 0); 248 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, 0); 249 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 250 SPIDER_NET_PROMISC_VALUE); 251 } else { 252 macu = netdev->dev_addr[0]; 253 macu <<= 8; 254 macu |= netdev->dev_addr[1]; 255 memcpy(&macl, &netdev->dev_addr[2], sizeof(macl)); 256 257 macu |= SPIDER_NET_UA_DESCR_VALUE; 258 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, macu); 259 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, macl); 260 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 261 SPIDER_NET_NONPROMISC_VALUE); 262 } 263} 264 265/** 266 * spider_net_get_mac_address - read mac address from spider card 267 * @card: device structure 268 * 269 * reads MAC address from GMACUNIMACU and GMACUNIMACL registers 270 */ 271static int 272spider_net_get_mac_address(struct net_device *netdev) 273{ 274 struct spider_net_card *card = netdev_priv(netdev); 275 u32 macl, macu; 276 277 macl = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACL); 278 macu = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACU); 279 280 netdev->dev_addr[0] = (macu >> 24) & 0xff; 281 netdev->dev_addr[1] = (macu >> 16) & 0xff; 282 netdev->dev_addr[2] = (macu >> 8) & 0xff; 283 netdev->dev_addr[3] = macu & 0xff; 284 netdev->dev_addr[4] = (macl >> 8) & 0xff; 285 netdev->dev_addr[5] = macl & 0xff; 286 287 if (!is_valid_ether_addr(&netdev->dev_addr[0])) 288 return -EINVAL; 289 290 return 0; 291} 292 293/** 294 * spider_net_get_descr_status -- returns the status of a descriptor 295 * @descr: descriptor to look at 296 * 297 * returns the status as in the dmac_cmd_status field of the descriptor 298 */ 299static inline int 300spider_net_get_descr_status(struct spider_net_hw_descr *hwdescr) 301{ 302 return hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK; 303} 304 305/** 306 * spider_net_free_chain - free descriptor chain 307 * @card: card structure 308 * @chain: address of chain 309 * 310 */ 311static void 312spider_net_free_chain(struct spider_net_card *card, 313 struct spider_net_descr_chain *chain) 314{ 315 struct spider_net_descr *descr; 316 317 descr = chain->ring; 318 do { 319 descr->bus_addr = 0; 320 descr->hwdescr->next_descr_addr = 0; 321 descr = descr->next; 322 } while (descr != chain->ring); 323 324 dma_free_coherent(&card->pdev->dev, chain->num_desc, 325 chain->hwring, chain->dma_addr); 326} 327 328/** 329 * spider_net_init_chain - alloc and link descriptor chain 330 * @card: card structure 331 * @chain: address of chain 332 * 333 * We manage a circular list that mirrors the hardware structure, 334 * except that the hardware uses bus addresses. 335 * 336 * Returns 0 on success, <0 on failure 337 */ 338static int 339spider_net_init_chain(struct spider_net_card *card, 340 struct spider_net_descr_chain *chain) 341{ 342 int i; 343 struct spider_net_descr *descr; 344 struct spider_net_hw_descr *hwdescr; 345 dma_addr_t buf; 346 size_t alloc_size; 347 348 alloc_size = chain->num_desc * sizeof(struct spider_net_hw_descr); 349 350 chain->hwring = dma_alloc_coherent(&card->pdev->dev, alloc_size, 351 &chain->dma_addr, GFP_KERNEL); 352 353 if (!chain->hwring) 354 return -ENOMEM; 355 356 memset(chain->ring, 0, chain->num_desc * sizeof(struct spider_net_descr)); 357 358 /* Set up the hardware pointers in each descriptor */ 359 descr = chain->ring; 360 hwdescr = chain->hwring; 361 buf = chain->dma_addr; 362 for (i=0; i < chain->num_desc; i++, descr++, hwdescr++) { 363 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE; 364 hwdescr->next_descr_addr = 0; 365 366 descr->hwdescr = hwdescr; 367 descr->bus_addr = buf; 368 descr->next = descr + 1; 369 descr->prev = descr - 1; 370 371 buf += sizeof(struct spider_net_hw_descr); 372 } 373 /* do actual circular list */ 374 (descr-1)->next = chain->ring; 375 chain->ring->prev = descr-1; 376 377 spin_lock_init(&chain->lock); 378 chain->head = chain->ring; 379 chain->tail = chain->ring; 380 return 0; 381} 382 383/** 384 * spider_net_free_rx_chain_contents - frees descr contents in rx chain 385 * @card: card structure 386 * 387 * returns 0 on success, <0 on failure 388 */ 389static void 390spider_net_free_rx_chain_contents(struct spider_net_card *card) 391{ 392 struct spider_net_descr *descr; 393 394 descr = card->rx_chain.head; 395 do { 396 if (descr->skb) { 397 pci_unmap_single(card->pdev, descr->hwdescr->buf_addr, 398 SPIDER_NET_MAX_FRAME, 399 PCI_DMA_BIDIRECTIONAL); 400 dev_kfree_skb(descr->skb); 401 descr->skb = NULL; 402 } 403 descr = descr->next; 404 } while (descr != card->rx_chain.head); 405} 406 407/** 408 * spider_net_prepare_rx_descr - Reinitialize RX descriptor 409 * @card: card structure 410 * @descr: descriptor to re-init 411 * 412 * Return 0 on succes, <0 on failure. 413 * 414 * Allocates a new rx skb, iommu-maps it and attaches it to the 415 * descriptor. Mark the descriptor as activated, ready-to-use. 416 */ 417static int 418spider_net_prepare_rx_descr(struct spider_net_card *card, 419 struct spider_net_descr *descr) 420{ 421 struct spider_net_hw_descr *hwdescr = descr->hwdescr; 422 dma_addr_t buf; 423 int offset; 424 int bufsize; 425 426 /* we need to round up the buffer size to a multiple of 128 */ 427 bufsize = (SPIDER_NET_MAX_FRAME + SPIDER_NET_RXBUF_ALIGN - 1) & 428 (~(SPIDER_NET_RXBUF_ALIGN - 1)); 429 430 /* and we need to have it 128 byte aligned, therefore we allocate a 431 * bit more */ 432 /* allocate an skb */ 433 descr->skb = netdev_alloc_skb(card->netdev, 434 bufsize + SPIDER_NET_RXBUF_ALIGN - 1); 435 if (!descr->skb) { 436 if (netif_msg_rx_err(card) && net_ratelimit()) 437 dev_err(&card->netdev->dev, 438 "Not enough memory to allocate rx buffer\n"); 439 card->spider_stats.alloc_rx_skb_error++; 440 return -ENOMEM; 441 } 442 hwdescr->buf_size = bufsize; 443 hwdescr->result_size = 0; 444 hwdescr->valid_size = 0; 445 hwdescr->data_status = 0; 446 hwdescr->data_error = 0; 447 448 offset = ((unsigned long)descr->skb->data) & 449 (SPIDER_NET_RXBUF_ALIGN - 1); 450 if (offset) 451 skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset); 452 /* iommu-map the skb */ 453 buf = pci_map_single(card->pdev, descr->skb->data, 454 SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE); 455 if (pci_dma_mapping_error(buf)) { 456 dev_kfree_skb_any(descr->skb); 457 descr->skb = NULL; 458 if (netif_msg_rx_err(card) && net_ratelimit()) 459 dev_err(&card->netdev->dev, "Could not iommu-map rx buffer\n"); 460 card->spider_stats.rx_iommu_map_error++; 461 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE; 462 } else { 463 hwdescr->buf_addr = buf; 464 wmb(); 465 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED | 466 SPIDER_NET_DMAC_NOINTR_COMPLETE; 467 } 468 469 return 0; 470} 471 472/** 473 * spider_net_enable_rxchtails - sets RX dmac chain tail addresses 474 * @card: card structure 475 * 476 * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the 477 * chip by writing to the appropriate register. DMA is enabled in 478 * spider_net_enable_rxdmac. 479 */ 480static inline void 481spider_net_enable_rxchtails(struct spider_net_card *card) 482{ 483 /* assume chain is aligned correctly */ 484 spider_net_write_reg(card, SPIDER_NET_GDADCHA , 485 card->rx_chain.tail->bus_addr); 486} 487 488/** 489 * spider_net_enable_rxdmac - enables a receive DMA controller 490 * @card: card structure 491 * 492 * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN 493 * in the GDADMACCNTR register 494 */ 495static inline void 496spider_net_enable_rxdmac(struct spider_net_card *card) 497{ 498 wmb(); 499 spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR, 500 SPIDER_NET_DMA_RX_VALUE); 501} 502 503/** 504 * spider_net_disable_rxdmac - disables the receive DMA controller 505 * @card: card structure 506 * 507 * spider_net_disable_rxdmac terminates processing on the DMA controller 508 * by turing off the DMA controller, with the force-end flag set. 509 */ 510static inline void 511spider_net_disable_rxdmac(struct spider_net_card *card) 512{ 513 spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR, 514 SPIDER_NET_DMA_RX_FEND_VALUE); 515} 516 517/** 518 * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains 519 * @card: card structure 520 * 521 * refills descriptors in the rx chain: allocates skbs and iommu-maps them. 522 */ 523static void 524spider_net_refill_rx_chain(struct spider_net_card *card) 525{ 526 struct spider_net_descr_chain *chain = &card->rx_chain; 527 unsigned long flags; 528 529 /* one context doing the refill (and a second context seeing that 530 * and omitting it) is ok. If called by NAPI, we'll be called again 531 * as spider_net_decode_one_descr is called several times. If some 532 * interrupt calls us, the NAPI is about to clean up anyway. */ 533 if (!spin_trylock_irqsave(&chain->lock, flags)) 534 return; 535 536 while (spider_net_get_descr_status(chain->head->hwdescr) == 537 SPIDER_NET_DESCR_NOT_IN_USE) { 538 if (spider_net_prepare_rx_descr(card, chain->head)) 539 break; 540 chain->head = chain->head->next; 541 } 542 543 spin_unlock_irqrestore(&chain->lock, flags); 544} 545 546/** 547 * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains 548 * @card: card structure 549 * 550 * Returns 0 on success, <0 on failure. 551 */ 552static int 553spider_net_alloc_rx_skbs(struct spider_net_card *card) 554{ 555 struct spider_net_descr_chain *chain = &card->rx_chain; 556 struct spider_net_descr *start = chain->tail; 557 struct spider_net_descr *descr = start; 558 559 /* Link up the hardware chain pointers */ 560 do { 561 descr->prev->hwdescr->next_descr_addr = descr->bus_addr; 562 descr = descr->next; 563 } while (descr != start); 564 565 /* Put at least one buffer into the chain. if this fails, 566 * we've got a problem. If not, spider_net_refill_rx_chain 567 * will do the rest at the end of this function. */ 568 if (spider_net_prepare_rx_descr(card, chain->head)) 569 goto error; 570 else 571 chain->head = chain->head->next; 572 573 /* This will allocate the rest of the rx buffers; 574 * if not, it's business as usual later on. */ 575 spider_net_refill_rx_chain(card); 576 spider_net_enable_rxdmac(card); 577 return 0; 578 579error: 580 spider_net_free_rx_chain_contents(card); 581 return -ENOMEM; 582} 583 584/** 585 * spider_net_get_multicast_hash - generates hash for multicast filter table 586 * @addr: multicast address 587 * 588 * returns the hash value. 589 * 590 * spider_net_get_multicast_hash calculates a hash value for a given multicast 591 * address, that is used to set the multicast filter tables 592 */ 593static u8 594spider_net_get_multicast_hash(struct net_device *netdev, __u8 *addr) 595{ 596 u32 crc; 597 u8 hash; 598 char addr_for_crc[ETH_ALEN] = { 0, }; 599 int i, bit; 600 601 for (i = 0; i < ETH_ALEN * 8; i++) { 602 bit = (addr[i / 8] >> (i % 8)) & 1; 603 addr_for_crc[ETH_ALEN - 1 - i / 8] += bit << (7 - (i % 8)); 604 } 605 606 crc = crc32_be(~0, addr_for_crc, netdev->addr_len); 607 608 hash = (crc >> 27); 609 hash <<= 3; 610 hash |= crc & 7; 611 hash &= 0xff; 612 613 return hash; 614} 615 616/** 617 * spider_net_set_multi - sets multicast addresses and promisc flags 618 * @netdev: interface device structure 619 * 620 * spider_net_set_multi configures multicast addresses as needed for the 621 * netdev interface. It also sets up multicast, allmulti and promisc 622 * flags appropriately 623 */ 624static void 625spider_net_set_multi(struct net_device *netdev) 626{ 627 struct dev_mc_list *mc; 628 u8 hash; 629 int i; 630 u32 reg; 631 struct spider_net_card *card = netdev_priv(netdev); 632 unsigned long bitmask[SPIDER_NET_MULTICAST_HASHES / BITS_PER_LONG] = 633 {0, }; 634 635 spider_net_set_promisc(card); 636 637 if (netdev->flags & IFF_ALLMULTI) { 638 for (i = 0; i < SPIDER_NET_MULTICAST_HASHES; i++) { 639 set_bit(i, bitmask); 640 } 641 goto write_hash; 642 } 643 644 /* well, we know, what the broadcast hash value is: it's xfd 645 hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */ 646 set_bit(0xfd, bitmask); 647 648 for (mc = netdev->mc_list; mc; mc = mc->next) { 649 hash = spider_net_get_multicast_hash(netdev, mc->dmi_addr); 650 set_bit(hash, bitmask); 651 } 652 653write_hash: 654 for (i = 0; i < SPIDER_NET_MULTICAST_HASHES / 4; i++) { 655 reg = 0; 656 if (test_bit(i * 4, bitmask)) 657 reg += 0x08; 658 reg <<= 8; 659 if (test_bit(i * 4 + 1, bitmask)) 660 reg += 0x08; 661 reg <<= 8; 662 if (test_bit(i * 4 + 2, bitmask)) 663 reg += 0x08; 664 reg <<= 8; 665 if (test_bit(i * 4 + 3, bitmask)) 666 reg += 0x08; 667 668 spider_net_write_reg(card, SPIDER_NET_GMRMHFILnR + i * 4, reg); 669 } 670} 671 672/** 673 * spider_net_prepare_tx_descr - fill tx descriptor with skb data 674 * @card: card structure 675 * @descr: descriptor structure to fill out 676 * @skb: packet to use 677 * 678 * returns 0 on success, <0 on failure. 679 * 680 * fills out the descriptor structure with skb data and len. Copies data, 681 * if needed (32bit DMA!) 682 */ 683static int 684spider_net_prepare_tx_descr(struct spider_net_card *card, 685 struct sk_buff *skb) 686{ 687 struct spider_net_descr_chain *chain = &card->tx_chain; 688 struct spider_net_descr *descr; 689 struct spider_net_hw_descr *hwdescr; 690 dma_addr_t buf; 691 unsigned long flags; 692 693 buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); 694 if (pci_dma_mapping_error(buf)) { 695 if (netif_msg_tx_err(card) && net_ratelimit()) 696 dev_err(&card->netdev->dev, "could not iommu-map packet (%p, %i). " 697 "Dropping packet\n", skb->data, skb->len); 698 card->spider_stats.tx_iommu_map_error++; 699 return -ENOMEM; 700 } 701 702 spin_lock_irqsave(&chain->lock, flags); 703 descr = card->tx_chain.head; 704 if (descr->next == chain->tail->prev) { 705 spin_unlock_irqrestore(&chain->lock, flags); 706 pci_unmap_single(card->pdev, buf, skb->len, PCI_DMA_TODEVICE); 707 return -ENOMEM; 708 } 709 hwdescr = descr->hwdescr; 710 chain->head = descr->next; 711 712 descr->skb = skb; 713 hwdescr->buf_addr = buf; 714 hwdescr->buf_size = skb->len; 715 hwdescr->next_descr_addr = 0; 716 hwdescr->data_status = 0; 717 718 hwdescr->dmac_cmd_status = 719 SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_TXFRMTL; 720 spin_unlock_irqrestore(&chain->lock, flags); 721 722 if (skb->ip_summed == CHECKSUM_PARTIAL) 723 switch (ip_hdr(skb)->protocol) { 724 case IPPROTO_TCP: 725 hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP; 726 break; 727 case IPPROTO_UDP: 728 hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP; 729 break; 730 } 731 732 /* Chain the bus address, so that the DMA engine finds this descr. */ 733 wmb(); 734 descr->prev->hwdescr->next_descr_addr = descr->bus_addr; 735 736 card->netdev->trans_start = jiffies; /* set netdev watchdog timer */ 737 return 0; 738} 739 740static int 741spider_net_set_low_watermark(struct spider_net_card *card) 742{ 743 struct spider_net_descr *descr = card->tx_chain.tail; 744 struct spider_net_hw_descr *hwdescr; 745 unsigned long flags; 746 int status; 747 int cnt=0; 748 int i; 749 750 /* Measure the length of the queue. Measurement does not 751 * need to be precise -- does not need a lock. */ 752 while (descr != card->tx_chain.head) { 753 status = descr->hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_NOT_IN_USE; 754 if (status == SPIDER_NET_DESCR_NOT_IN_USE) 755 break; 756 descr = descr->next; 757 cnt++; 758 } 759 760 /* If TX queue is short, don't even bother with interrupts */ 761 if (cnt < card->tx_chain.num_desc/4) 762 return cnt; 763 764 /* Set low-watermark 3/4th's of the way into the queue. */ 765 descr = card->tx_chain.tail; 766 cnt = (cnt*3)/4; 767 for (i=0;i<cnt; i++) 768 descr = descr->next; 769 770 /* Set the new watermark, clear the old watermark */ 771 spin_lock_irqsave(&card->tx_chain.lock, flags); 772 descr->hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_TXDESFLG; 773 if (card->low_watermark && card->low_watermark != descr) { 774 hwdescr = card->low_watermark->hwdescr; 775 hwdescr->dmac_cmd_status = 776 hwdescr->dmac_cmd_status & ~SPIDER_NET_DESCR_TXDESFLG; 777 } 778 card->low_watermark = descr; 779 spin_unlock_irqrestore(&card->tx_chain.lock, flags); 780 return cnt; 781} 782 783/** 784 * spider_net_release_tx_chain - processes sent tx descriptors 785 * @card: adapter structure 786 * @brutal: if set, don't care about whether descriptor seems to be in use 787 * 788 * returns 0 if the tx ring is empty, otherwise 1. 789 * 790 * spider_net_release_tx_chain releases the tx descriptors that spider has 791 * finished with (if non-brutal) or simply release tx descriptors (if brutal). 792 * If some other context is calling this function, we return 1 so that we're 793 * scheduled again (if we were scheduled) and will not loose initiative. 794 */ 795static int 796spider_net_release_tx_chain(struct spider_net_card *card, int brutal) 797{ 798 struct net_device *dev = card->netdev; 799 struct spider_net_descr_chain *chain = &card->tx_chain; 800 struct spider_net_descr *descr; 801 struct spider_net_hw_descr *hwdescr; 802 struct sk_buff *skb; 803 u32 buf_addr; 804 unsigned long flags; 805 int status; 806 807 while (1) { 808 spin_lock_irqsave(&chain->lock, flags); 809 if (chain->tail == chain->head) { 810 spin_unlock_irqrestore(&chain->lock, flags); 811 return 0; 812 } 813 descr = chain->tail; 814 hwdescr = descr->hwdescr; 815 816 status = spider_net_get_descr_status(hwdescr); 817 switch (status) { 818 case SPIDER_NET_DESCR_COMPLETE: 819 dev->stats.tx_packets++; 820 dev->stats.tx_bytes += descr->skb->len; 821 break; 822 823 case SPIDER_NET_DESCR_CARDOWNED: 824 if (!brutal) { 825 spin_unlock_irqrestore(&chain->lock, flags); 826 return 1; 827 } 828 829 /* fallthrough, if we release the descriptors 830 * brutally (then we don't care about 831 * SPIDER_NET_DESCR_CARDOWNED) */ 832 833 case SPIDER_NET_DESCR_RESPONSE_ERROR: 834 case SPIDER_NET_DESCR_PROTECTION_ERROR: 835 case SPIDER_NET_DESCR_FORCE_END: 836 if (netif_msg_tx_err(card)) 837 dev_err(&card->netdev->dev, "forcing end of tx descriptor " 838 "with status x%02x\n", status); 839 dev->stats.tx_errors++; 840 break; 841 842 default: 843 dev->stats.tx_dropped++; 844 if (!brutal) { 845 spin_unlock_irqrestore(&chain->lock, flags); 846 return 1; 847 } 848 } 849 850 chain->tail = descr->next; 851 hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE; 852 skb = descr->skb; 853 descr->skb = NULL; 854 buf_addr = hwdescr->buf_addr; 855 spin_unlock_irqrestore(&chain->lock, flags); 856 857 /* unmap the skb */ 858 if (skb) { 859 pci_unmap_single(card->pdev, buf_addr, skb->len, 860 PCI_DMA_TODEVICE); 861 dev_kfree_skb(skb); 862 } 863 } 864 return 0; 865} 866 867/** 868 * spider_net_kick_tx_dma - enables TX DMA processing 869 * @card: card structure 870 * @descr: descriptor address to enable TX processing at 871 * 872 * This routine will start the transmit DMA running if 873 * it is not already running. This routine ned only be 874 * called when queueing a new packet to an empty tx queue. 875 * Writes the current tx chain head as start address 876 * of the tx descriptor chain and enables the transmission 877 * DMA engine. 878 */ 879static inline void 880spider_net_kick_tx_dma(struct spider_net_card *card) 881{ 882 struct spider_net_descr *descr; 883 884 if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) & 885 SPIDER_NET_TX_DMA_EN) 886 goto out; 887 888 descr = card->tx_chain.tail; 889 for (;;) { 890 if (spider_net_get_descr_status(descr->hwdescr) == 891 SPIDER_NET_DESCR_CARDOWNED) { 892 spider_net_write_reg(card, SPIDER_NET_GDTDCHA, 893 descr->bus_addr); 894 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, 895 SPIDER_NET_DMA_TX_VALUE); 896 break; 897 } 898 if (descr == card->tx_chain.head) 899 break; 900 descr = descr->next; 901 } 902 903out: 904 mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER); 905} 906 907/** 908 * spider_net_xmit - transmits a frame over the device 909 * @skb: packet to send out 910 * @netdev: interface device structure 911 * 912 * returns 0 on success, !0 on failure 913 */ 914static int 915spider_net_xmit(struct sk_buff *skb, struct net_device *netdev) 916{ 917 int cnt; 918 struct spider_net_card *card = netdev_priv(netdev); 919 920 spider_net_release_tx_chain(card, 0); 921 922 if (spider_net_prepare_tx_descr(card, skb) != 0) { 923 netdev->stats.tx_dropped++; 924 netif_stop_queue(netdev); 925 return NETDEV_TX_BUSY; 926 } 927 928 cnt = spider_net_set_low_watermark(card); 929 if (cnt < 5) 930 spider_net_kick_tx_dma(card); 931 return NETDEV_TX_OK; 932} 933 934/** 935 * spider_net_cleanup_tx_ring - cleans up the TX ring 936 * @card: card structure 937 * 938 * spider_net_cleanup_tx_ring is called by either the tx_timer 939 * or from the NAPI polling routine. 940 * This routine releases resources associted with transmitted 941 * packets, including updating the queue tail pointer. 942 */ 943static void 944spider_net_cleanup_tx_ring(struct spider_net_card *card) 945{ 946 if ((spider_net_release_tx_chain(card, 0) != 0) && 947 (card->netdev->flags & IFF_UP)) { 948 spider_net_kick_tx_dma(card); 949 netif_wake_queue(card->netdev); 950 } 951} 952 953/** 954 * spider_net_do_ioctl - called for device ioctls 955 * @netdev: interface device structure 956 * @ifr: request parameter structure for ioctl 957 * @cmd: command code for ioctl 958 * 959 * returns 0 on success, <0 on failure. Currently, we have no special ioctls. 960 * -EOPNOTSUPP is returned, if an unknown ioctl was requested 961 */ 962static int 963spider_net_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) 964{ 965 switch (cmd) { 966 default: 967 return -EOPNOTSUPP; 968 } 969} 970 971/** 972 * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on 973 * @descr: descriptor to process 974 * @card: card structure 975 * 976 * Fills out skb structure and passes the data to the stack. 977 * The descriptor state is not changed. 978 */ 979static void 980spider_net_pass_skb_up(struct spider_net_descr *descr, 981 struct spider_net_card *card) 982{ 983 struct spider_net_hw_descr *hwdescr = descr->hwdescr; 984 struct sk_buff *skb = descr->skb; 985 struct net_device *netdev = card->netdev; 986 u32 data_status = hwdescr->data_status; 987 u32 data_error = hwdescr->data_error; 988 989 skb_put(skb, hwdescr->valid_size); 990 991 /* the card seems to add 2 bytes of junk in front 992 * of the ethernet frame */ 993#define SPIDER_MISALIGN 2 994 skb_pull(skb, SPIDER_MISALIGN); 995 skb->protocol = eth_type_trans(skb, netdev); 996 997 /* checksum offload */ 998 if (card->options.rx_csum) { 999 if ( ( (data_status & SPIDER_NET_DATA_STATUS_CKSUM_MASK) == 1000 SPIDER_NET_DATA_STATUS_CKSUM_MASK) && 1001 !(data_error & SPIDER_NET_DATA_ERR_CKSUM_MASK)) 1002 skb->ip_summed = CHECKSUM_UNNECESSARY; 1003 else 1004 skb->ip_summed = CHECKSUM_NONE; 1005 } else 1006 skb->ip_summed = CHECKSUM_NONE; 1007 1008 if (data_status & SPIDER_NET_VLAN_PACKET) { 1009 /* further enhancements: HW-accel VLAN 1010 * vlan_hwaccel_receive_skb 1011 */ 1012 } 1013 1014 /* update netdevice statistics */ 1015 netdev->stats.rx_packets++; 1016 netdev->stats.rx_bytes += skb->len; 1017 1018 /* pass skb up to stack */ 1019 netif_receive_skb(skb); 1020} 1021 1022static void show_rx_chain(struct spider_net_card *card) 1023{ 1024 struct spider_net_descr_chain *chain = &card->rx_chain; 1025 struct spider_net_descr *start= chain->tail; 1026 struct spider_net_descr *descr= start; 1027 struct spider_net_hw_descr *hwd = start->hwdescr; 1028 struct device *dev = &card->netdev->dev; 1029 u32 curr_desc, next_desc; 1030 int status; 1031 1032 int tot = 0; 1033 int cnt = 0; 1034 int off = start - chain->ring; 1035 int cstat = hwd->dmac_cmd_status; 1036 1037 dev_info(dev, "Total number of descrs=%d\n", 1038 chain->num_desc); 1039 dev_info(dev, "Chain tail located at descr=%d, status=0x%x\n", 1040 off, cstat); 1041 1042 curr_desc = spider_net_read_reg(card, SPIDER_NET_GDACTDPA); 1043 next_desc = spider_net_read_reg(card, SPIDER_NET_GDACNEXTDA); 1044 1045 status = cstat; 1046 do 1047 { 1048 hwd = descr->hwdescr; 1049 off = descr - chain->ring; 1050 status = hwd->dmac_cmd_status; 1051 1052 if (descr == chain->head) 1053 dev_info(dev, "Chain head is at %d, head status=0x%x\n", 1054 off, status); 1055 1056 if (curr_desc == descr->bus_addr) 1057 dev_info(dev, "HW curr desc (GDACTDPA) is at %d, status=0x%x\n", 1058 off, status); 1059 1060 if (next_desc == descr->bus_addr) 1061 dev_info(dev, "HW next desc (GDACNEXTDA) is at %d, status=0x%x\n", 1062 off, status); 1063 1064 if (hwd->next_descr_addr == 0) 1065 dev_info(dev, "chain is cut at %d\n", off); 1066 1067 if (cstat != status) { 1068 int from = (chain->num_desc + off - cnt) % chain->num_desc; 1069 int to = (chain->num_desc + off - 1) % chain->num_desc; 1070 dev_info(dev, "Have %d (from %d to %d) descrs " 1071 "with stat=0x%08x\n", cnt, from, to, cstat); 1072 cstat = status; 1073 cnt = 0; 1074 } 1075 1076 cnt ++; 1077 tot ++; 1078 descr = descr->next; 1079 } while (descr != start); 1080 1081 dev_info(dev, "Last %d descrs with stat=0x%08x " 1082 "for a total of %d descrs\n", cnt, cstat, tot); 1083 1084#ifdef DEBUG 1085 /* Now dump the whole ring */ 1086 descr = start; 1087 do 1088 { 1089 struct spider_net_hw_descr *hwd = descr->hwdescr; 1090 status = spider_net_get_descr_status(hwd); 1091 cnt = descr - chain->ring; 1092 dev_info(dev, "Descr %d stat=0x%08x skb=%p\n", 1093 cnt, status, descr->skb); 1094 dev_info(dev, "bus addr=%08x buf addr=%08x sz=%d\n", 1095 descr->bus_addr, hwd->buf_addr, hwd->buf_size); 1096 dev_info(dev, "next=%08x result sz=%d valid sz=%d\n", 1097 hwd->next_descr_addr, hwd->result_size, 1098 hwd->valid_size); 1099 dev_info(dev, "dmac=%08x data stat=%08x data err=%08x\n", 1100 hwd->dmac_cmd_status, hwd->data_status, 1101 hwd->data_error); 1102 dev_info(dev, "\n"); 1103 1104 descr = descr->next; 1105 } while (descr != start); 1106#endif 1107 1108} 1109 1110/** 1111 * spider_net_resync_head_ptr - Advance head ptr past empty descrs 1112 * 1113 * If the driver fails to keep up and empty the queue, then the 1114 * hardware wil run out of room to put incoming packets. This 1115 * will cause the hardware to skip descrs that are full (instead 1116 * of halting/retrying). Thus, once the driver runs, it wil need 1117 * to "catch up" to where the hardware chain pointer is at. 1118 */ 1119static void spider_net_resync_head_ptr(struct spider_net_card *card) 1120{ 1121 unsigned long flags; 1122 struct spider_net_descr_chain *chain = &card->rx_chain; 1123 struct spider_net_descr *descr; 1124 int i, status; 1125 1126 /* Advance head pointer past any empty descrs */ 1127 descr = chain->head; 1128 status = spider_net_get_descr_status(descr->hwdescr); 1129 1130 if (status == SPIDER_NET_DESCR_NOT_IN_USE) 1131 return; 1132 1133 spin_lock_irqsave(&chain->lock, flags); 1134 1135 descr = chain->head; 1136 status = spider_net_get_descr_status(descr->hwdescr); 1137 for (i=0; i<chain->num_desc; i++) { 1138 if (status != SPIDER_NET_DESCR_CARDOWNED) break; 1139 descr = descr->next; 1140 status = spider_net_get_descr_status(descr->hwdescr); 1141 } 1142 chain->head = descr; 1143 1144 spin_unlock_irqrestore(&chain->lock, flags); 1145} 1146 1147static int spider_net_resync_tail_ptr(struct spider_net_card *card) 1148{ 1149 struct spider_net_descr_chain *chain = &card->rx_chain; 1150 struct spider_net_descr *descr; 1151 int i, status; 1152 1153 /* Advance tail pointer past any empty and reaped descrs */ 1154 descr = chain->tail; 1155 status = spider_net_get_descr_status(descr->hwdescr); 1156 1157 for (i=0; i<chain->num_desc; i++) { 1158 if ((status != SPIDER_NET_DESCR_CARDOWNED) && 1159 (status != SPIDER_NET_DESCR_NOT_IN_USE)) break; 1160 descr = descr->next; 1161 status = spider_net_get_descr_status(descr->hwdescr); 1162 } 1163 chain->tail = descr; 1164 1165 if ((i == chain->num_desc) || (i == 0)) 1166 return 1; 1167 return 0; 1168} 1169 1170/** 1171 * spider_net_decode_one_descr - processes an RX descriptor 1172 * @card: card structure 1173 * 1174 * Returns 1 if a packet has been sent to the stack, otherwise 0. 1175 * 1176 * Processes an RX descriptor by iommu-unmapping the data buffer 1177 * and passing the packet up to the stack. This function is called 1178 * in softirq context, e.g. either bottom half from interrupt or 1179 * NAPI polling context. 1180 */ 1181static int 1182spider_net_decode_one_descr(struct spider_net_card *card) 1183{ 1184 struct net_device *dev = card->netdev; 1185 struct spider_net_descr_chain *chain = &card->rx_chain; 1186 struct spider_net_descr *descr = chain->tail; 1187 struct spider_net_hw_descr *hwdescr = descr->hwdescr; 1188 u32 hw_buf_addr; 1189 int status; 1190 1191 status = spider_net_get_descr_status(hwdescr); 1192 1193 /* Nothing in the descriptor, or ring must be empty */ 1194 if ((status == SPIDER_NET_DESCR_CARDOWNED) || 1195 (status == SPIDER_NET_DESCR_NOT_IN_USE)) 1196 return 0; 1197 1198 /* descriptor definitively used -- move on tail */ 1199 chain->tail = descr->next; 1200 1201 /* unmap descriptor */ 1202 hw_buf_addr = hwdescr->buf_addr; 1203 hwdescr->buf_addr = 0xffffffff; 1204 pci_unmap_single(card->pdev, hw_buf_addr, 1205 SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE); 1206 1207 if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) || 1208 (status == SPIDER_NET_DESCR_PROTECTION_ERROR) || 1209 (status == SPIDER_NET_DESCR_FORCE_END) ) { 1210 if (netif_msg_rx_err(card)) 1211 dev_err(&dev->dev, 1212 "dropping RX descriptor with state %d\n", status); 1213 dev->stats.rx_dropped++; 1214 goto bad_desc; 1215 } 1216 1217 if ( (status != SPIDER_NET_DESCR_COMPLETE) && 1218 (status != SPIDER_NET_DESCR_FRAME_END) ) { 1219 if (netif_msg_rx_err(card)) 1220 dev_err(&card->netdev->dev, 1221 "RX descriptor with unknown state %d\n", status); 1222 card->spider_stats.rx_desc_unk_state++; 1223 goto bad_desc; 1224 } 1225 1226 /* The cases we'll throw away the packet immediately */ 1227 if (hwdescr->data_error & SPIDER_NET_DESTROY_RX_FLAGS) { 1228 if (netif_msg_rx_err(card)) 1229 dev_err(&card->netdev->dev, 1230 "error in received descriptor found, " 1231 "data_status=x%08x, data_error=x%08x\n", 1232 hwdescr->data_status, hwdescr->data_error); 1233 goto bad_desc; 1234 } 1235 1236 if (hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_BAD_STATUS) { 1237 dev_err(&card->netdev->dev, "bad status, cmd_status=x%08x\n", 1238 hwdescr->dmac_cmd_status); 1239 pr_err("buf_addr=x%08x\n", hw_buf_addr); 1240 pr_err("buf_size=x%08x\n", hwdescr->buf_size); 1241 pr_err("next_descr_addr=x%08x\n", hwdescr->next_descr_addr); 1242 pr_err("result_size=x%08x\n", hwdescr->result_size); 1243 pr_err("valid_size=x%08x\n", hwdescr->valid_size); 1244 pr_err("data_status=x%08x\n", hwdescr->data_status); 1245 pr_err("data_error=x%08x\n", hwdescr->data_error); 1246 pr_err("which=%ld\n", descr - card->rx_chain.ring); 1247 1248 card->spider_stats.rx_desc_error++; 1249 goto bad_desc; 1250 } 1251 1252 /* Ok, we've got a packet in descr */ 1253 spider_net_pass_skb_up(descr, card); 1254 descr->skb = NULL; 1255 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE; 1256 return 1; 1257 1258bad_desc: 1259 if (netif_msg_rx_err(card)) 1260 show_rx_chain(card); 1261 dev_kfree_skb_irq(descr->skb); 1262 descr->skb = NULL; 1263 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE; 1264 return 0; 1265} 1266 1267/** 1268 * spider_net_poll - NAPI poll function called by the stack to return packets 1269 * @netdev: interface device structure 1270 * @budget: number of packets we can pass to the stack at most 1271 * 1272 * returns 0 if no more packets available to the driver/stack. Returns 1, 1273 * if the quota is exceeded, but the driver has still packets. 1274 * 1275 * spider_net_poll returns all packets from the rx descriptors to the stack 1276 * (using netif_receive_skb). If all/enough packets are up, the driver 1277 * reenables interrupts and returns 0. If not, 1 is returned. 1278 */ 1279static int spider_net_poll(struct napi_struct *napi, int budget) 1280{ 1281 struct spider_net_card *card = container_of(napi, struct spider_net_card, napi); 1282 struct net_device *netdev = card->netdev; 1283 int packets_done = 0; 1284 1285 while (packets_done < budget) { 1286 if (!spider_net_decode_one_descr(card)) 1287 break; 1288 1289 packets_done++; 1290 } 1291 1292 if ((packets_done == 0) && (card->num_rx_ints != 0)) { 1293 if (!spider_net_resync_tail_ptr(card)) 1294 packets_done = budget; 1295 spider_net_resync_head_ptr(card); 1296 } 1297 card->num_rx_ints = 0; 1298 1299 spider_net_refill_rx_chain(card); 1300 spider_net_enable_rxdmac(card); 1301 1302 spider_net_cleanup_tx_ring(card); 1303 1304 /* if all packets are in the stack, enable interrupts and return 0 */ 1305 /* if not, return 1 */ 1306 if (packets_done < budget) { 1307 netif_rx_complete(netdev, napi); 1308 spider_net_rx_irq_on(card); 1309 card->ignore_rx_ramfull = 0; 1310 } 1311 1312 return packets_done; 1313} 1314 1315/** 1316 * spider_net_change_mtu - changes the MTU of an interface 1317 * @netdev: interface device structure 1318 * @new_mtu: new MTU value 1319 * 1320 * returns 0 on success, <0 on failure 1321 */ 1322static int 1323spider_net_change_mtu(struct net_device *netdev, int new_mtu) 1324{ 1325 /* no need to re-alloc skbs or so -- the max mtu is about 2.3k 1326 * and mtu is outbound only anyway */ 1327 if ( (new_mtu < SPIDER_NET_MIN_MTU ) || 1328 (new_mtu > SPIDER_NET_MAX_MTU) ) 1329 return -EINVAL; 1330 netdev->mtu = new_mtu; 1331 return 0; 1332} 1333 1334/** 1335 * spider_net_set_mac - sets the MAC of an interface 1336 * @netdev: interface device structure 1337 * @ptr: pointer to new MAC address 1338 * 1339 * Returns 0 on success, <0 on failure. Currently, we don't support this 1340 * and will always return EOPNOTSUPP. 1341 */ 1342static int 1343spider_net_set_mac(struct net_device *netdev, void *p) 1344{ 1345 struct spider_net_card *card = netdev_priv(netdev); 1346 u32 macl, macu, regvalue; 1347 struct sockaddr *addr = p; 1348 1349 if (!is_valid_ether_addr(addr->sa_data)) 1350 return -EADDRNOTAVAIL; 1351 1352 /* switch off GMACTPE and GMACRPE */ 1353 regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD); 1354 regvalue &= ~((1 << 5) | (1 << 6)); 1355 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue); 1356 1357 /* write mac */ 1358 macu = (addr->sa_data[0]<<24) + (addr->sa_data[1]<<16) + 1359 (addr->sa_data[2]<<8) + (addr->sa_data[3]); 1360 macl = (addr->sa_data[4]<<8) + (addr->sa_data[5]); 1361 spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu); 1362 spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl); 1363 1364 /* switch GMACTPE and GMACRPE back on */ 1365 regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD); 1366 regvalue |= ((1 << 5) | (1 << 6)); 1367 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue); 1368 1369 spider_net_set_promisc(card); 1370 1371 /* look up, whether we have been successful */ 1372 if (spider_net_get_mac_address(netdev)) 1373 return -EADDRNOTAVAIL; 1374 if (memcmp(netdev->dev_addr,addr->sa_data,netdev->addr_len)) 1375 return -EADDRNOTAVAIL; 1376 1377 return 0; 1378} 1379 1380/** 1381 * spider_net_link_reset 1382 * @netdev: net device structure 1383 * 1384 * This is called when the PHY_LINK signal is asserted. For the blade this is 1385 * not connected so we should never get here. 1386 * 1387 */ 1388static void 1389spider_net_link_reset(struct net_device *netdev) 1390{ 1391 1392 struct spider_net_card *card = netdev_priv(netdev); 1393 1394 del_timer_sync(&card->aneg_timer); 1395 1396 /* clear interrupt, block further interrupts */ 1397 spider_net_write_reg(card, SPIDER_NET_GMACST, 1398 spider_net_read_reg(card, SPIDER_NET_GMACST)); 1399 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0); 1400 1401 /* reset phy and setup aneg */ 1402 spider_net_setup_aneg(card); 1403 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER); 1404 1405} 1406 1407/** 1408 * spider_net_handle_error_irq - handles errors raised by an interrupt 1409 * @card: card structure 1410 * @status_reg: interrupt status register 0 (GHIINT0STS) 1411 * 1412 * spider_net_handle_error_irq treats or ignores all error conditions 1413 * found when an interrupt is presented 1414 */ 1415static void 1416spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg) 1417{ 1418 u32 error_reg1, error_reg2; 1419 u32 i; 1420 int show_error = 1; 1421 1422 error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS); 1423 error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS); 1424 1425 error_reg1 &= SPIDER_NET_INT1_MASK_VALUE; 1426 error_reg2 &= SPIDER_NET_INT2_MASK_VALUE; 1427 1428 /* check GHIINT0STS ************************************/ 1429 if (status_reg) 1430 for (i = 0; i < 32; i++) 1431 if (status_reg & (1<<i)) 1432 switch (i) 1433 { 1434 /* let error_reg1 and error_reg2 evaluation decide, what to do 1435 case SPIDER_NET_PHYINT: 1436 case SPIDER_NET_GMAC2INT: 1437 case SPIDER_NET_GMAC1INT: 1438 case SPIDER_NET_GFIFOINT: 1439 case SPIDER_NET_DMACINT: 1440 case SPIDER_NET_GSYSINT: 1441 break; */ 1442 1443 case SPIDER_NET_GIPSINT: 1444 show_error = 0; 1445 break; 1446 1447 case SPIDER_NET_GPWOPCMPINT: 1448 /* PHY write operation completed */ 1449 show_error = 0; 1450 break; 1451 case SPIDER_NET_GPROPCMPINT: 1452 /* PHY read operation completed */ 1453 /* we don't use semaphores, as we poll for the completion 1454 * of the read operation in spider_net_read_phy. Should take 1455 * about 50 us */ 1456 show_error = 0; 1457 break; 1458 case SPIDER_NET_GPWFFINT: 1459 /* PHY command queue full */ 1460 if (netif_msg_intr(card)) 1461 dev_err(&card->netdev->dev, "PHY write queue full\n"); 1462 show_error = 0; 1463 break; 1464 1465 /* case SPIDER_NET_GRMDADRINT: not used. print a message */ 1466 /* case SPIDER_NET_GRMARPINT: not used. print a message */ 1467 /* case SPIDER_NET_GRMMPINT: not used. print a message */ 1468 1469 case SPIDER_NET_GDTDEN0INT: 1470 /* someone has set TX_DMA_EN to 0 */ 1471 show_error = 0; 1472 break; 1473 1474 case SPIDER_NET_GDDDEN0INT: /* fallthrough */ 1475 case SPIDER_NET_GDCDEN0INT: /* fallthrough */ 1476 case SPIDER_NET_GDBDEN0INT: /* fallthrough */ 1477 case SPIDER_NET_GDADEN0INT: 1478 /* someone has set RX_DMA_EN to 0 */ 1479 show_error = 0; 1480 break; 1481 1482 /* RX interrupts */ 1483 case SPIDER_NET_GDDFDCINT: 1484 case SPIDER_NET_GDCFDCINT: 1485 case SPIDER_NET_GDBFDCINT: 1486 case SPIDER_NET_GDAFDCINT: 1487 /* case SPIDER_NET_GDNMINT: not used. print a message */ 1488 /* case SPIDER_NET_GCNMINT: not used. print a message */ 1489 /* case SPIDER_NET_GBNMINT: not used. print a message */ 1490 /* case SPIDER_NET_GANMINT: not used. print a message */ 1491 /* case SPIDER_NET_GRFNMINT: not used. print a message */ 1492 show_error = 0; 1493 break; 1494 1495 /* TX interrupts */ 1496 case SPIDER_NET_GDTFDCINT: 1497 show_error = 0; 1498 break; 1499 case SPIDER_NET_GTTEDINT: 1500 show_error = 0; 1501 break; 1502 case SPIDER_NET_GDTDCEINT: 1503 /* chain end. If a descriptor should be sent, kick off 1504 * tx dma 1505 if (card->tx_chain.tail != card->tx_chain.head) 1506 spider_net_kick_tx_dma(card); 1507 */ 1508 show_error = 0; 1509 break; 1510 1511 /* case SPIDER_NET_G1TMCNTINT: not used. print a message */ 1512 /* case SPIDER_NET_GFREECNTINT: not used. print a message */ 1513 } 1514 1515 /* check GHIINT1STS ************************************/ 1516 if (error_reg1) 1517 for (i = 0; i < 32; i++) 1518 if (error_reg1 & (1<<i)) 1519 switch (i) 1520 { 1521 case SPIDER_NET_GTMFLLINT: 1522 /* TX RAM full may happen on a usual case. 1523 * Logging is not needed. */ 1524 show_error = 0; 1525 break; 1526 case SPIDER_NET_GRFDFLLINT: /* fallthrough */ 1527 case SPIDER_NET_GRFCFLLINT: /* fallthrough */ 1528 case SPIDER_NET_GRFBFLLINT: /* fallthrough */ 1529 case SPIDER_NET_GRFAFLLINT: /* fallthrough */ 1530 case SPIDER_NET_GRMFLLINT: 1531 /* Could happen when rx chain is full */ 1532 if (card->ignore_rx_ramfull == 0) { 1533 card->ignore_rx_ramfull = 1; 1534 spider_net_resync_head_ptr(card); 1535 spider_net_refill_rx_chain(card); 1536 spider_net_enable_rxdmac(card); 1537 card->num_rx_ints ++; 1538 netif_rx_schedule(card->netdev, 1539 &card->napi); 1540 } 1541 show_error = 0; 1542 break; 1543 1544 /* case SPIDER_NET_GTMSHTINT: problem, print a message */ 1545 case SPIDER_NET_GDTINVDINT: 1546 /* allrighty. tx from previous descr ok */ 1547 show_error = 0; 1548 break; 1549 1550 /* chain end */ 1551 case SPIDER_NET_GDDDCEINT: /* fallthrough */ 1552 case SPIDER_NET_GDCDCEINT: /* fallthrough */ 1553 case SPIDER_NET_GDBDCEINT: /* fallthrough */ 1554 case SPIDER_NET_GDADCEINT: 1555 spider_net_resync_head_ptr(card); 1556 spider_net_refill_rx_chain(card); 1557 spider_net_enable_rxdmac(card); 1558 card->num_rx_ints ++; 1559 netif_rx_schedule(card->netdev, 1560 &card->napi); 1561 show_error = 0; 1562 break; 1563 1564 /* invalid descriptor */ 1565 case SPIDER_NET_GDDINVDINT: /* fallthrough */ 1566 case SPIDER_NET_GDCINVDINT: /* fallthrough */ 1567 case SPIDER_NET_GDBINVDINT: /* fallthrough */ 1568 case SPIDER_NET_GDAINVDINT: 1569 /* Could happen when rx chain is full */ 1570 spider_net_resync_head_ptr(card); 1571 spider_net_refill_rx_chain(card); 1572 spider_net_enable_rxdmac(card); 1573 card->num_rx_ints ++; 1574 netif_rx_schedule(card->netdev, 1575 &card->napi); 1576 show_error = 0; 1577 break; 1578 1579 /* case SPIDER_NET_GDTRSERINT: problem, print a message */ 1580 /* case SPIDER_NET_GDDRSERINT: problem, print a message */ 1581 /* case SPIDER_NET_GDCRSERINT: problem, print a message */ 1582 /* case SPIDER_NET_GDBRSERINT: problem, print a message */ 1583 /* case SPIDER_NET_GDARSERINT: problem, print a message */ 1584 /* case SPIDER_NET_GDSERINT: problem, print a message */ 1585 /* case SPIDER_NET_GDTPTERINT: problem, print a message */ 1586 /* case SPIDER_NET_GDDPTERINT: problem, print a message */ 1587 /* case SPIDER_NET_GDCPTERINT: problem, print a message */ 1588 /* case SPIDER_NET_GDBPTERINT: problem, print a message */ 1589 /* case SPIDER_NET_GDAPTERINT: problem, print a message */ 1590 default: 1591 show_error = 1; 1592 break; 1593 } 1594 1595 /* check GHIINT2STS ************************************/ 1596 if (error_reg2) 1597 for (i = 0; i < 32; i++) 1598 if (error_reg2 & (1<<i)) 1599 switch (i) 1600 { 1601 /* there is nothing we can (want to) do at this time. Log a 1602 * message, we can switch on and off the specific values later on 1603 case SPIDER_NET_GPROPERINT: 1604 case SPIDER_NET_GMCTCRSNGINT: 1605 case SPIDER_NET_GMCTLCOLINT: 1606 case SPIDER_NET_GMCTTMOTINT: 1607 case SPIDER_NET_GMCRCAERINT: 1608 case SPIDER_NET_GMCRCALERINT: 1609 case SPIDER_NET_GMCRALNERINT: 1610 case SPIDER_NET_GMCROVRINT: 1611 case SPIDER_NET_GMCRRNTINT: 1612 case SPIDER_NET_GMCRRXERINT: 1613 case SPIDER_NET_GTITCSERINT: 1614 case SPIDER_NET_GTIFMTERINT: 1615 case SPIDER_NET_GTIPKTRVKINT: 1616 case SPIDER_NET_GTISPINGINT: 1617 case SPIDER_NET_GTISADNGINT: 1618 case SPIDER_NET_GTISPDNGINT: 1619 case SPIDER_NET_GRIFMTERINT: 1620 case SPIDER_NET_GRIPKTRVKINT: 1621 case SPIDER_NET_GRISPINGINT: 1622 case SPIDER_NET_GRISADNGINT: 1623 case SPIDER_NET_GRISPDNGINT: 1624 break; 1625 */ 1626 default: 1627 break; 1628 } 1629 1630 if ((show_error) && (netif_msg_intr(card)) && net_ratelimit()) 1631 dev_err(&card->netdev->dev, "Error interrupt, GHIINT0STS = 0x%08x, " 1632 "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n", 1633 status_reg, error_reg1, error_reg2); 1634 1635 /* clear interrupt sources */ 1636 spider_net_write_reg(card, SPIDER_NET_GHIINT1STS, error_reg1); 1637 spider_net_write_reg(card, SPIDER_NET_GHIINT2STS, error_reg2); 1638} 1639 1640/** 1641 * spider_net_interrupt - interrupt handler for spider_net 1642 * @irq: interrupt number 1643 * @ptr: pointer to net_device 1644 * @regs: PU registers 1645 * 1646 * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no 1647 * interrupt found raised by card. 1648 * 1649 * This is the interrupt handler, that turns off 1650 * interrupts for this device and makes the stack poll the driver 1651 */ 1652static irqreturn_t 1653spider_net_interrupt(int irq, void *ptr) 1654{ 1655 struct net_device *netdev = ptr; 1656 struct spider_net_card *card = netdev_priv(netdev); 1657 u32 status_reg; 1658 1659 status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS); 1660 status_reg &= SPIDER_NET_INT0_MASK_VALUE; 1661 1662 if (!status_reg) 1663 return IRQ_NONE; 1664 1665 if (status_reg & SPIDER_NET_RXINT ) { 1666 spider_net_rx_irq_off(card); 1667 netif_rx_schedule(netdev, &card->napi); 1668 card->num_rx_ints ++; 1669 } 1670 if (status_reg & SPIDER_NET_TXINT) 1671 netif_rx_schedule(netdev, &card->napi); 1672 1673 if (status_reg & SPIDER_NET_LINKINT) 1674 spider_net_link_reset(netdev); 1675 1676 if (status_reg & SPIDER_NET_ERRINT ) 1677 spider_net_handle_error_irq(card, status_reg); 1678 1679 /* clear interrupt sources */ 1680 spider_net_write_reg(card, SPIDER_NET_GHIINT0STS, status_reg); 1681 1682 return IRQ_HANDLED; 1683} 1684 1685#ifdef CONFIG_NET_POLL_CONTROLLER 1686/** 1687 * spider_net_poll_controller - artificial interrupt for netconsole etc. 1688 * @netdev: interface device structure 1689 * 1690 * see Documentation/networking/netconsole.txt 1691 */ 1692static void 1693spider_net_poll_controller(struct net_device *netdev) 1694{ 1695 disable_irq(netdev->irq); 1696 spider_net_interrupt(netdev->irq, netdev); 1697 enable_irq(netdev->irq); 1698} 1699#endif /* CONFIG_NET_POLL_CONTROLLER */ 1700 1701/** 1702 * spider_net_enable_interrupts - enable interrupts 1703 * @card: card structure 1704 * 1705 * spider_net_enable_interrupt enables several interrupts 1706 */ 1707static void 1708spider_net_enable_interrupts(struct spider_net_card *card) 1709{ 1710 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 1711 SPIDER_NET_INT0_MASK_VALUE); 1712 spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 1713 SPIDER_NET_INT1_MASK_VALUE); 1714 spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 1715 SPIDER_NET_INT2_MASK_VALUE); 1716} 1717 1718/** 1719 * spider_net_disable_interrupts - disable interrupts 1720 * @card: card structure 1721 * 1722 * spider_net_disable_interrupts disables all the interrupts 1723 */ 1724static void 1725spider_net_disable_interrupts(struct spider_net_card *card) 1726{ 1727 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0); 1728 spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0); 1729 spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0); 1730 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0); 1731} 1732 1733/** 1734 * spider_net_init_card - initializes the card 1735 * @card: card structure 1736 * 1737 * spider_net_init_card initializes the card so that other registers can 1738 * be used 1739 */ 1740static void 1741spider_net_init_card(struct spider_net_card *card) 1742{ 1743 spider_net_write_reg(card, SPIDER_NET_CKRCTRL, 1744 SPIDER_NET_CKRCTRL_STOP_VALUE); 1745 1746 spider_net_write_reg(card, SPIDER_NET_CKRCTRL, 1747 SPIDER_NET_CKRCTRL_RUN_VALUE); 1748 1749 /* trigger ETOMOD signal */ 1750 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, 1751 spider_net_read_reg(card, SPIDER_NET_GMACOPEMD) | 0x4); 1752 1753 spider_net_disable_interrupts(card); 1754} 1755 1756/** 1757 * spider_net_enable_card - enables the card by setting all kinds of regs 1758 * @card: card structure 1759 * 1760 * spider_net_enable_card sets a lot of SMMIO registers to enable the device 1761 */ 1762static void 1763spider_net_enable_card(struct spider_net_card *card) 1764{ 1765 int i; 1766 /* the following array consists of (register),(value) pairs 1767 * that are set in this function. A register of 0 ends the list */ 1768 u32 regs[][2] = { 1769 { SPIDER_NET_GRESUMINTNUM, 0 }, 1770 { SPIDER_NET_GREINTNUM, 0 }, 1771 1772 /* set interrupt frame number registers */ 1773 /* clear the single DMA engine registers first */ 1774 { SPIDER_NET_GFAFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, 1775 { SPIDER_NET_GFBFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, 1776 { SPIDER_NET_GFCFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, 1777 { SPIDER_NET_GFDFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, 1778 /* then set, what we really need */ 1779 { SPIDER_NET_GFFRMNUM, SPIDER_NET_FRAMENUM_VALUE }, 1780 1781 /* timer counter registers and stuff */ 1782 { SPIDER_NET_GFREECNNUM, 0 }, 1783 { SPIDER_NET_GONETIMENUM, 0 }, 1784 { SPIDER_NET_GTOUTFRMNUM, 0 }, 1785 1786 /* RX mode setting */ 1787 { SPIDER_NET_GRXMDSET, SPIDER_NET_RXMODE_VALUE }, 1788 /* TX mode setting */ 1789 { SPIDER_NET_GTXMDSET, SPIDER_NET_TXMODE_VALUE }, 1790 /* IPSEC mode setting */ 1791 { SPIDER_NET_GIPSECINIT, SPIDER_NET_IPSECINIT_VALUE }, 1792 1793 { SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE }, 1794 1795 { SPIDER_NET_GMRWOLCTRL, 0 }, 1796 { SPIDER_NET_GTESTMD, 0x10000000 }, 1797 { SPIDER_NET_GTTQMSK, 0x00400040 }, 1798 1799 { SPIDER_NET_GMACINTEN, 0 }, 1800 1801 /* flow control stuff */ 1802 { SPIDER_NET_GMACAPAUSE, SPIDER_NET_MACAPAUSE_VALUE }, 1803 { SPIDER_NET_GMACTXPAUSE, SPIDER_NET_TXPAUSE_VALUE }, 1804 1805 { SPIDER_NET_GMACBSTLMT, SPIDER_NET_BURSTLMT_VALUE }, 1806 { 0, 0} 1807 }; 1808 1809 i = 0; 1810 while (regs[i][0]) { 1811 spider_net_write_reg(card, regs[i][0], regs[i][1]); 1812 i++; 1813 } 1814 1815 /* clear unicast filter table entries 1 to 14 */ 1816 for (i = 1; i <= 14; i++) { 1817 spider_net_write_reg(card, 1818 SPIDER_NET_GMRUAFILnR + i * 8, 1819 0x00080000); 1820 spider_net_write_reg(card, 1821 SPIDER_NET_GMRUAFILnR + i * 8 + 4, 1822 0x00000000); 1823 } 1824 1825 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 0x08080000); 1826 1827 spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE); 1828 1829 /* set chain tail adress for RX chains and 1830 * enable DMA */ 1831 spider_net_enable_rxchtails(card); 1832 spider_net_enable_rxdmac(card); 1833 1834 spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE); 1835 1836 spider_net_write_reg(card, SPIDER_NET_GMACLENLMT, 1837 SPIDER_NET_LENLMT_VALUE); 1838 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, 1839 SPIDER_NET_OPMODE_VALUE); 1840 1841 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, 1842 SPIDER_NET_GDTBSTA); 1843} 1844 1845/** 1846 * spider_net_download_firmware - loads firmware into the adapter 1847 * @card: card structure 1848 * @firmware_ptr: pointer to firmware data 1849 * 1850 * spider_net_download_firmware loads the firmware data into the 1851 * adapter. It assumes the length etc. to be allright. 1852 */ 1853static int 1854spider_net_download_firmware(struct spider_net_card *card, 1855 const void *firmware_ptr) 1856{ 1857 int sequencer, i; 1858 const u32 *fw_ptr = firmware_ptr; 1859 1860 /* stop sequencers */ 1861 spider_net_write_reg(card, SPIDER_NET_GSINIT, 1862 SPIDER_NET_STOP_SEQ_VALUE); 1863 1864 for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS; 1865 sequencer++) { 1866 spider_net_write_reg(card, 1867 SPIDER_NET_GSnPRGADR + sequencer * 8, 0); 1868 for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) { 1869 spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + 1870 sequencer * 8, *fw_ptr); 1871 fw_ptr++; 1872 } 1873 } 1874 1875 if (spider_net_read_reg(card, SPIDER_NET_GSINIT)) 1876 return -EIO; 1877 1878 spider_net_write_reg(card, SPIDER_NET_GSINIT, 1879 SPIDER_NET_RUN_SEQ_VALUE); 1880 1881 return 0; 1882} 1883 1884/** 1885 * spider_net_init_firmware - reads in firmware parts 1886 * @card: card structure 1887 * 1888 * Returns 0 on success, <0 on failure 1889 * 1890 * spider_net_init_firmware opens the sequencer firmware and does some basic 1891 * checks. This function opens and releases the firmware structure. A call 1892 * to download the firmware is performed before the release. 1893 * 1894 * Firmware format 1895 * =============== 1896 * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being 1897 * the program for each sequencer. Use the command 1898 * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \ 1899 * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \ 1900 * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin 1901 * 1902 * to generate spider_fw.bin, if you have sequencer programs with something 1903 * like the following contents for each sequencer: 1904 * <ONE LINE COMMENT> 1905 * <FIRST 4-BYTES-WORD FOR SEQUENCER> 1906 * <SECOND 4-BYTES-WORD FOR SEQUENCER> 1907 * ... 1908 * <1024th 4-BYTES-WORD FOR SEQUENCER> 1909 */ 1910static int 1911spider_net_init_firmware(struct spider_net_card *card) 1912{ 1913 struct firmware *firmware = NULL; 1914 struct device_node *dn; 1915 const u8 *fw_prop = NULL; 1916 int err = -ENOENT; 1917 int fw_size; 1918 1919 if (request_firmware((const struct firmware **)&firmware, 1920 SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) { 1921 if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) && 1922 netif_msg_probe(card) ) { 1923 dev_err(&card->netdev->dev, 1924 "Incorrect size of spidernet firmware in " \ 1925 "filesystem. Looking in host firmware...\n"); 1926 goto try_host_fw; 1927 } 1928 err = spider_net_download_firmware(card, firmware->data); 1929 1930 release_firmware(firmware); 1931 if (err) 1932 goto try_host_fw; 1933 1934 goto done; 1935 } 1936 1937try_host_fw: 1938 dn = pci_device_to_OF_node(card->pdev); 1939 if (!dn) 1940 goto out_err; 1941 1942 fw_prop = of_get_property(dn, "firmware", &fw_size); 1943 if (!fw_prop) 1944 goto out_err; 1945 1946 if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) && 1947 netif_msg_probe(card) ) { 1948 dev_err(&card->netdev->dev, 1949 "Incorrect size of spidernet firmware in host firmware\n"); 1950 goto done; 1951 } 1952 1953 err = spider_net_download_firmware(card, fw_prop); 1954 1955done: 1956 return err; 1957out_err: 1958 if (netif_msg_probe(card)) 1959 dev_err(&card->netdev->dev, 1960 "Couldn't find spidernet firmware in filesystem " \ 1961 "or host firmware\n"); 1962 return err; 1963} 1964 1965/** 1966 * spider_net_open - called upon ifonfig up 1967 * @netdev: interface device structure 1968 * 1969 * returns 0 on success, <0 on failure 1970 * 1971 * spider_net_open allocates all the descriptors and memory needed for 1972 * operation, sets up multicast list and enables interrupts 1973 */ 1974int 1975spider_net_open(struct net_device *netdev) 1976{ 1977 struct spider_net_card *card = netdev_priv(netdev); 1978 int result; 1979 1980 result = spider_net_init_firmware(card); 1981 if (result) 1982 goto init_firmware_failed; 1983 1984 /* start probing with copper */ 1985 spider_net_setup_aneg(card); 1986 if (card->phy.def->phy_id) 1987 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER); 1988 1989 result = spider_net_init_chain(card, &card->tx_chain); 1990 if (result) 1991 goto alloc_tx_failed; 1992 card->low_watermark = NULL; 1993 1994 result = spider_net_init_chain(card, &card->rx_chain); 1995 if (result) 1996 goto alloc_rx_failed; 1997 1998 /* Allocate rx skbs */ 1999 if (spider_net_alloc_rx_skbs(card)) 2000 goto alloc_skbs_failed; 2001 2002 spider_net_set_multi(netdev); 2003 2004 /* further enhancement: setup hw vlan, if needed */ 2005 2006 result = -EBUSY; 2007 if (request_irq(netdev->irq, spider_net_interrupt, 2008 IRQF_SHARED, netdev->name, netdev)) 2009 goto register_int_failed; 2010 2011 spider_net_enable_card(card); 2012 2013 netif_start_queue(netdev); 2014 netif_carrier_on(netdev); 2015 napi_enable(&card->napi); 2016 2017 spider_net_enable_interrupts(card); 2018 2019 return 0; 2020 2021register_int_failed: 2022 spider_net_free_rx_chain_contents(card); 2023alloc_skbs_failed: 2024 spider_net_free_chain(card, &card->rx_chain); 2025alloc_rx_failed: 2026 spider_net_free_chain(card, &card->tx_chain); 2027alloc_tx_failed: 2028 del_timer_sync(&card->aneg_timer); 2029init_firmware_failed: 2030 return result; 2031} 2032 2033/** 2034 * spider_net_link_phy 2035 * @data: used for pointer to card structure 2036 * 2037 */ 2038static void spider_net_link_phy(unsigned long data) 2039{ 2040 struct spider_net_card *card = (struct spider_net_card *)data; 2041 struct mii_phy *phy = &card->phy; 2042 2043 /* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */ 2044 if (card->aneg_count > SPIDER_NET_ANEG_TIMEOUT) { 2045 2046 pr_info("%s: link is down trying to bring it up\n", card->netdev->name); 2047 2048 switch (card->medium) { 2049 case BCM54XX_COPPER: 2050 /* enable fiber with autonegotiation first */ 2051 if (phy->def->ops->enable_fiber) 2052 phy->def->ops->enable_fiber(phy, 1); 2053 card->medium = BCM54XX_FIBER; 2054 break; 2055 2056 case BCM54XX_FIBER: 2057 /* fiber didn't come up, try to disable fiber autoneg */ 2058 if (phy->def->ops->enable_fiber) 2059 phy->def->ops->enable_fiber(phy, 0); 2060 card->medium = BCM54XX_UNKNOWN; 2061 break; 2062 2063 case BCM54XX_UNKNOWN: 2064 /* copper, fiber with and without failed, 2065 * retry from beginning */ 2066 spider_net_setup_aneg(card); 2067 card->medium = BCM54XX_COPPER; 2068 break; 2069 } 2070 2071 card->aneg_count = 0; 2072 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER); 2073 return; 2074 } 2075 2076 /* link still not up, try again later */ 2077 if (!(phy->def->ops->poll_link(phy))) { 2078 card->aneg_count++; 2079 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER); 2080 return; 2081 } 2082 2083 /* link came up, get abilities */ 2084 phy->def->ops->read_link(phy); 2085 2086 spider_net_write_reg(card, SPIDER_NET_GMACST, 2087 spider_net_read_reg(card, SPIDER_NET_GMACST)); 2088 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0x4); 2089 2090 if (phy->speed == 1000) 2091 spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0x00000001); 2092 else 2093 spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0); 2094 2095 card->aneg_count = 0; 2096 2097 pr_debug("Found %s with %i Mbps, %s-duplex %sautoneg.\n", 2098 phy->def->name, phy->speed, phy->duplex==1 ? "Full" : "Half", 2099 phy->autoneg==1 ? "" : "no "); 2100 2101 return; 2102} 2103 2104/** 2105 * spider_net_setup_phy - setup PHY 2106 * @card: card structure 2107 * 2108 * returns 0 on success, <0 on failure 2109 * 2110 * spider_net_setup_phy is used as part of spider_net_probe. 2111 **/ 2112static int 2113spider_net_setup_phy(struct spider_net_card *card) 2114{ 2115 struct mii_phy *phy = &card->phy; 2116 2117 spider_net_write_reg(card, SPIDER_NET_GDTDMASEL, 2118 SPIDER_NET_DMASEL_VALUE); 2119 spider_net_write_reg(card, SPIDER_NET_GPCCTRL, 2120 SPIDER_NET_PHY_CTRL_VALUE); 2121 2122 phy->dev = card->netdev; 2123 phy->mdio_read = spider_net_read_phy; 2124 phy->mdio_write = spider_net_write_phy; 2125 2126 for (phy->mii_id = 1; phy->mii_id <= 31; phy->mii_id++) { 2127 unsigned short id; 2128 id = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR); 2129 if (id != 0x0000 && id != 0xffff) { 2130 if (!mii_phy_probe(phy, phy->mii_id)) { 2131 pr_info("Found %s.\n", phy->def->name); 2132 break; 2133 } 2134 } 2135 } 2136 2137 return 0; 2138} 2139 2140/** 2141 * spider_net_workaround_rxramfull - work around firmware bug 2142 * @card: card structure 2143 * 2144 * no return value 2145 **/ 2146static void 2147spider_net_workaround_rxramfull(struct spider_net_card *card) 2148{ 2149 int i, sequencer = 0; 2150 2151 /* cancel reset */ 2152 spider_net_write_reg(card, SPIDER_NET_CKRCTRL, 2153 SPIDER_NET_CKRCTRL_RUN_VALUE); 2154 2155 /* empty sequencer data */ 2156 for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS; 2157 sequencer++) { 2158 spider_net_write_reg(card, SPIDER_NET_GSnPRGADR + 2159 sequencer * 8, 0x0); 2160 for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) { 2161 spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + 2162 sequencer * 8, 0x0); 2163 } 2164 } 2165 2166 /* set sequencer operation */ 2167 spider_net_write_reg(card, SPIDER_NET_GSINIT, 0x000000fe); 2168 2169 /* reset */ 2170 spider_net_write_reg(card, SPIDER_NET_CKRCTRL, 2171 SPIDER_NET_CKRCTRL_STOP_VALUE); 2172} 2173 2174/** 2175 * spider_net_stop - called upon ifconfig down 2176 * @netdev: interface device structure 2177 * 2178 * always returns 0 2179 */ 2180int 2181spider_net_stop(struct net_device *netdev) 2182{ 2183 struct spider_net_card *card = netdev_priv(netdev); 2184 2185 napi_disable(&card->napi); 2186 netif_carrier_off(netdev); 2187 netif_stop_queue(netdev); 2188 del_timer_sync(&card->tx_timer); 2189 del_timer_sync(&card->aneg_timer); 2190 2191 spider_net_disable_interrupts(card); 2192 2193 free_irq(netdev->irq, netdev); 2194 2195 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, 2196 SPIDER_NET_DMA_TX_FEND_VALUE); 2197 2198 /* turn off DMA, force end */ 2199 spider_net_disable_rxdmac(card); 2200 2201 /* release chains */ 2202 spider_net_release_tx_chain(card, 1); 2203 spider_net_free_rx_chain_contents(card); 2204 2205 spider_net_free_chain(card, &card->tx_chain); 2206 spider_net_free_chain(card, &card->rx_chain); 2207 2208 return 0; 2209} 2210 2211/** 2212 * spider_net_tx_timeout_task - task scheduled by the watchdog timeout 2213 * function (to be called not under interrupt status) 2214 * @data: data, is interface device structure 2215 * 2216 * called as task when tx hangs, resets interface (if interface is up) 2217 */ 2218static void 2219spider_net_tx_timeout_task(struct work_struct *work) 2220{ 2221 struct spider_net_card *card = 2222 container_of(work, struct spider_net_card, tx_timeout_task); 2223 struct net_device *netdev = card->netdev; 2224 2225 if (!(netdev->flags & IFF_UP)) 2226 goto out; 2227 2228 netif_device_detach(netdev); 2229 spider_net_stop(netdev); 2230 2231 spider_net_workaround_rxramfull(card); 2232 spider_net_init_card(card); 2233 2234 if (spider_net_setup_phy(card)) 2235 goto out; 2236 2237 spider_net_open(netdev); 2238 spider_net_kick_tx_dma(card); 2239 netif_device_attach(netdev); 2240 2241out: 2242 atomic_dec(&card->tx_timeout_task_counter); 2243} 2244 2245/** 2246 * spider_net_tx_timeout - called when the tx timeout watchdog kicks in. 2247 * @netdev: interface device structure 2248 * 2249 * called, if tx hangs. Schedules a task that resets the interface 2250 */ 2251static void 2252spider_net_tx_timeout(struct net_device *netdev) 2253{ 2254 struct spider_net_card *card; 2255 2256 card = netdev_priv(netdev); 2257 atomic_inc(&card->tx_timeout_task_counter); 2258 if (netdev->flags & IFF_UP) 2259 schedule_work(&card->tx_timeout_task); 2260 else 2261 atomic_dec(&card->tx_timeout_task_counter); 2262 card->spider_stats.tx_timeouts++; 2263} 2264 2265/** 2266 * spider_net_setup_netdev_ops - initialization of net_device operations 2267 * @netdev: net_device structure 2268 * 2269 * fills out function pointers in the net_device structure 2270 */ 2271static void 2272spider_net_setup_netdev_ops(struct net_device *netdev) 2273{ 2274 netdev->open = &spider_net_open; 2275 netdev->stop = &spider_net_stop; 2276 netdev->hard_start_xmit = &spider_net_xmit; 2277 netdev->set_multicast_list = &spider_net_set_multi; 2278 netdev->set_mac_address = &spider_net_set_mac; 2279 netdev->change_mtu = &spider_net_change_mtu; 2280 netdev->do_ioctl = &spider_net_do_ioctl; 2281 /* tx watchdog */ 2282 netdev->tx_timeout = &spider_net_tx_timeout; 2283 netdev->watchdog_timeo = SPIDER_NET_WATCHDOG_TIMEOUT; 2284 /* HW VLAN */ 2285#ifdef CONFIG_NET_POLL_CONTROLLER 2286 /* poll controller */ 2287 netdev->poll_controller = &spider_net_poll_controller; 2288#endif /* CONFIG_NET_POLL_CONTROLLER */ 2289 /* ethtool ops */ 2290 netdev->ethtool_ops = &spider_net_ethtool_ops; 2291} 2292 2293/** 2294 * spider_net_setup_netdev - initialization of net_device 2295 * @card: card structure 2296 * 2297 * Returns 0 on success or <0 on failure 2298 * 2299 * spider_net_setup_netdev initializes the net_device structure 2300 **/ 2301static int 2302spider_net_setup_netdev(struct spider_net_card *card) 2303{ 2304 int result; 2305 struct net_device *netdev = card->netdev; 2306 struct device_node *dn; 2307 struct sockaddr addr; 2308 const u8 *mac; 2309 2310 SET_NETDEV_DEV(netdev, &card->pdev->dev); 2311 2312 pci_set_drvdata(card->pdev, netdev); 2313 2314 init_timer(&card->tx_timer); 2315 card->tx_timer.function = 2316 (void (*)(unsigned long)) spider_net_cleanup_tx_ring; 2317 card->tx_timer.data = (unsigned long) card; 2318 netdev->irq = card->pdev->irq; 2319 2320 card->aneg_count = 0; 2321 init_timer(&card->aneg_timer); 2322 card->aneg_timer.function = spider_net_link_phy; 2323 card->aneg_timer.data = (unsigned long) card; 2324 2325 card->options.rx_csum = SPIDER_NET_RX_CSUM_DEFAULT; 2326 2327 netif_napi_add(netdev, &card->napi, 2328 spider_net_poll, SPIDER_NET_NAPI_WEIGHT); 2329 2330 spider_net_setup_netdev_ops(netdev); 2331 2332 netdev->features = NETIF_F_IP_CSUM | NETIF_F_LLTX; 2333 /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | 2334 * NETIF_F_HW_VLAN_FILTER */ 2335 2336 netdev->irq = card->pdev->irq; 2337 card->num_rx_ints = 0; 2338 card->ignore_rx_ramfull = 0; 2339 2340 dn = pci_device_to_OF_node(card->pdev); 2341 if (!dn) 2342 return -EIO; 2343 2344 mac = of_get_property(dn, "local-mac-address", NULL); 2345 if (!mac) 2346 return -EIO; 2347 memcpy(addr.sa_data, mac, ETH_ALEN); 2348 2349 result = spider_net_set_mac(netdev, &addr); 2350 if ((result) && (netif_msg_probe(card))) 2351 dev_err(&card->netdev->dev, 2352 "Failed to set MAC address: %i\n", result); 2353 2354 result = register_netdev(netdev); 2355 if (result) { 2356 if (netif_msg_probe(card)) 2357 dev_err(&card->netdev->dev, 2358 "Couldn't register net_device: %i\n", result); 2359 return result; 2360 } 2361 2362 if (netif_msg_probe(card)) 2363 pr_info("Initialized device %s.\n", netdev->name); 2364 2365 return 0; 2366} 2367 2368/** 2369 * spider_net_alloc_card - allocates net_device and card structure 2370 * 2371 * returns the card structure or NULL in case of errors 2372 * 2373 * the card and net_device structures are linked to each other 2374 */ 2375static struct spider_net_card * 2376spider_net_alloc_card(void) 2377{ 2378 struct net_device *netdev; 2379 struct spider_net_card *card; 2380 size_t alloc_size; 2381 2382 alloc_size = sizeof(struct spider_net_card) + 2383 (tx_descriptors + rx_descriptors) * sizeof(struct spider_net_descr); 2384 netdev = alloc_etherdev(alloc_size); 2385 if (!netdev) 2386 return NULL; 2387 2388 card = netdev_priv(netdev); 2389 card->netdev = netdev; 2390 card->msg_enable = SPIDER_NET_DEFAULT_MSG; 2391 INIT_WORK(&card->tx_timeout_task, spider_net_tx_timeout_task); 2392 init_waitqueue_head(&card->waitq); 2393 atomic_set(&card->tx_timeout_task_counter, 0); 2394 2395 card->rx_chain.num_desc = rx_descriptors; 2396 card->rx_chain.ring = card->darray; 2397 card->tx_chain.num_desc = tx_descriptors; 2398 card->tx_chain.ring = card->darray + rx_descriptors; 2399 2400 return card; 2401} 2402 2403/** 2404 * spider_net_undo_pci_setup - releases PCI ressources 2405 * @card: card structure 2406 * 2407 * spider_net_undo_pci_setup releases the mapped regions 2408 */ 2409static void 2410spider_net_undo_pci_setup(struct spider_net_card *card) 2411{ 2412 iounmap(card->regs); 2413 pci_release_regions(card->pdev); 2414} 2415 2416/** 2417 * spider_net_setup_pci_dev - sets up the device in terms of PCI operations 2418 * @card: card structure 2419 * @pdev: PCI device 2420 * 2421 * Returns the card structure or NULL if any errors occur 2422 * 2423 * spider_net_setup_pci_dev initializes pdev and together with the 2424 * functions called in spider_net_open configures the device so that 2425 * data can be transferred over it 2426 * The net_device structure is attached to the card structure, if the 2427 * function returns without error. 2428 **/ 2429static struct spider_net_card * 2430spider_net_setup_pci_dev(struct pci_dev *pdev) 2431{ 2432 struct spider_net_card *card; 2433 unsigned long mmio_start, mmio_len; 2434 2435 if (pci_enable_device(pdev)) { 2436 dev_err(&pdev->dev, "Couldn't enable PCI device\n"); 2437 return NULL; 2438 } 2439 2440 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { 2441 dev_err(&pdev->dev, 2442 "Couldn't find proper PCI device base address.\n"); 2443 goto out_disable_dev; 2444 } 2445 2446 if (pci_request_regions(pdev, spider_net_driver_name)) { 2447 dev_err(&pdev->dev, 2448 "Couldn't obtain PCI resources, aborting.\n"); 2449 goto out_disable_dev; 2450 } 2451 2452 pci_set_master(pdev); 2453 2454 card = spider_net_alloc_card(); 2455 if (!card) { 2456 dev_err(&pdev->dev, 2457 "Couldn't allocate net_device structure, aborting.\n"); 2458 goto out_release_regions; 2459 } 2460 card->pdev = pdev; 2461 2462 /* fetch base address and length of first resource */ 2463 mmio_start = pci_resource_start(pdev, 0); 2464 mmio_len = pci_resource_len(pdev, 0); 2465 2466 card->netdev->mem_start = mmio_start; 2467 card->netdev->mem_end = mmio_start + mmio_len; 2468 card->regs = ioremap(mmio_start, mmio_len); 2469 2470 if (!card->regs) { 2471 dev_err(&pdev->dev, 2472 "Couldn't obtain PCI resources, aborting.\n"); 2473 goto out_release_regions; 2474 } 2475 2476 return card; 2477 2478out_release_regions: 2479 pci_release_regions(pdev); 2480out_disable_dev: 2481 pci_disable_device(pdev); 2482 pci_set_drvdata(pdev, NULL); 2483 return NULL; 2484} 2485 2486/** 2487 * spider_net_probe - initialization of a device 2488 * @pdev: PCI device 2489 * @ent: entry in the device id list 2490 * 2491 * Returns 0 on success, <0 on failure 2492 * 2493 * spider_net_probe initializes pdev and registers a net_device 2494 * structure for it. After that, the device can be ifconfig'ed up 2495 **/ 2496static int __devinit 2497spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 2498{ 2499 int err = -EIO; 2500 struct spider_net_card *card; 2501 2502 card = spider_net_setup_pci_dev(pdev); 2503 if (!card) 2504 goto out; 2505 2506 spider_net_workaround_rxramfull(card); 2507 spider_net_init_card(card); 2508 2509 err = spider_net_setup_phy(card); 2510 if (err) 2511 goto out_undo_pci; 2512 2513 err = spider_net_setup_netdev(card); 2514 if (err) 2515 goto out_undo_pci; 2516 2517 return 0; 2518 2519out_undo_pci: 2520 spider_net_undo_pci_setup(card); 2521 free_netdev(card->netdev); 2522out: 2523 return err; 2524} 2525 2526/** 2527 * spider_net_remove - removal of a device 2528 * @pdev: PCI device 2529 * 2530 * Returns 0 on success, <0 on failure 2531 * 2532 * spider_net_remove is called to remove the device and unregisters the 2533 * net_device 2534 **/ 2535static void __devexit 2536spider_net_remove(struct pci_dev *pdev) 2537{ 2538 struct net_device *netdev; 2539 struct spider_net_card *card; 2540 2541 netdev = pci_get_drvdata(pdev); 2542 card = netdev_priv(netdev); 2543 2544 wait_event(card->waitq, 2545 atomic_read(&card->tx_timeout_task_counter) == 0); 2546 2547 unregister_netdev(netdev); 2548 2549 /* switch off card */ 2550 spider_net_write_reg(card, SPIDER_NET_CKRCTRL, 2551 SPIDER_NET_CKRCTRL_STOP_VALUE); 2552 spider_net_write_reg(card, SPIDER_NET_CKRCTRL, 2553 SPIDER_NET_CKRCTRL_RUN_VALUE); 2554 2555 spider_net_undo_pci_setup(card); 2556 free_netdev(netdev); 2557} 2558 2559static struct pci_driver spider_net_driver = { 2560 .name = spider_net_driver_name, 2561 .id_table = spider_net_pci_tbl, 2562 .probe = spider_net_probe, 2563 .remove = __devexit_p(spider_net_remove) 2564}; 2565 2566/** 2567 * spider_net_init - init function when the driver is loaded 2568 * 2569 * spider_net_init registers the device driver 2570 */ 2571static int __init spider_net_init(void) 2572{ 2573 printk(KERN_INFO "Spidernet version %s.\n", VERSION); 2574 2575 if (rx_descriptors < SPIDER_NET_RX_DESCRIPTORS_MIN) { 2576 rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MIN; 2577 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors); 2578 } 2579 if (rx_descriptors > SPIDER_NET_RX_DESCRIPTORS_MAX) { 2580 rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MAX; 2581 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors); 2582 } 2583 if (tx_descriptors < SPIDER_NET_TX_DESCRIPTORS_MIN) { 2584 tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MIN; 2585 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors); 2586 } 2587 if (tx_descriptors > SPIDER_NET_TX_DESCRIPTORS_MAX) { 2588 tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MAX; 2589 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors); 2590 } 2591 2592 return pci_register_driver(&spider_net_driver); 2593} 2594 2595/** 2596 * spider_net_cleanup - exit function when driver is unloaded 2597 * 2598 * spider_net_cleanup unregisters the device driver 2599 */ 2600static void __exit spider_net_cleanup(void) 2601{ 2602 pci_unregister_driver(&spider_net_driver); 2603} 2604 2605module_init(spider_net_init); 2606module_exit(spider_net_cleanup);