Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at c9a28fa7b9ac19b676deefa0a171ce7df8755c08 1027 lines 26 kB view raw
1/* -*- linux-c -*- 2 * drivers/char/viotape.c 3 * 4 * iSeries Virtual Tape 5 * 6 * Authors: Dave Boutcher <boutcher@us.ibm.com> 7 * Ryan Arnold <ryanarn@us.ibm.com> 8 * Colin Devilbiss <devilbis@us.ibm.com> 9 * Stephen Rothwell <sfr@au1.ibm.com> 10 * 11 * (C) Copyright 2000-2004 IBM Corporation 12 * 13 * This program is free software; you can redistribute it and/or 14 * modify it under the terms of the GNU General Public License as 15 * published by the Free Software Foundation; either version 2 of the 16 * License, or (at your option) anyu later version. 17 * 18 * This program is distributed in the hope that it will be useful, but 19 * WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 21 * General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software Foundation, 25 * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 26 * 27 * This routine provides access to tape drives owned and managed by an OS/400 28 * partition running on the same box as this Linux partition. 29 * 30 * All tape operations are performed by sending messages back and forth to 31 * the OS/400 partition. The format of the messages is defined in 32 * iseries/vio.h 33 */ 34#include <linux/module.h> 35#include <linux/kernel.h> 36#include <linux/errno.h> 37#include <linux/init.h> 38#include <linux/wait.h> 39#include <linux/spinlock.h> 40#include <linux/mtio.h> 41#include <linux/device.h> 42#include <linux/dma-mapping.h> 43#include <linux/fs.h> 44#include <linux/cdev.h> 45#include <linux/major.h> 46#include <linux/completion.h> 47#include <linux/proc_fs.h> 48#include <linux/seq_file.h> 49 50#include <asm/uaccess.h> 51#include <asm/ioctls.h> 52#include <asm/firmware.h> 53#include <asm/vio.h> 54#include <asm/iseries/vio.h> 55#include <asm/iseries/hv_lp_event.h> 56#include <asm/iseries/hv_call_event.h> 57#include <asm/iseries/hv_lp_config.h> 58 59#define VIOTAPE_VERSION "1.2" 60#define VIOTAPE_MAXREQ 1 61 62#define VIOTAPE_KERN_WARN KERN_WARNING "viotape: " 63#define VIOTAPE_KERN_INFO KERN_INFO "viotape: " 64 65static int viotape_numdev; 66 67/* 68 * The minor number follows the conventions of the SCSI tape drives. The 69 * rewind and mode are encoded in the minor #. We use this struct to break 70 * them out 71 */ 72struct viot_devinfo_struct { 73 int devno; 74 int mode; 75 int rewind; 76}; 77 78#define VIOTAPOP_RESET 0 79#define VIOTAPOP_FSF 1 80#define VIOTAPOP_BSF 2 81#define VIOTAPOP_FSR 3 82#define VIOTAPOP_BSR 4 83#define VIOTAPOP_WEOF 5 84#define VIOTAPOP_REW 6 85#define VIOTAPOP_NOP 7 86#define VIOTAPOP_EOM 8 87#define VIOTAPOP_ERASE 9 88#define VIOTAPOP_SETBLK 10 89#define VIOTAPOP_SETDENSITY 11 90#define VIOTAPOP_SETPOS 12 91#define VIOTAPOP_GETPOS 13 92#define VIOTAPOP_SETPART 14 93#define VIOTAPOP_UNLOAD 15 94 95enum viotaperc { 96 viotape_InvalidRange = 0x0601, 97 viotape_InvalidToken = 0x0602, 98 viotape_DMAError = 0x0603, 99 viotape_UseError = 0x0604, 100 viotape_ReleaseError = 0x0605, 101 viotape_InvalidTape = 0x0606, 102 viotape_InvalidOp = 0x0607, 103 viotape_TapeErr = 0x0608, 104 105 viotape_AllocTimedOut = 0x0640, 106 viotape_BOTEnc = 0x0641, 107 viotape_BlankTape = 0x0642, 108 viotape_BufferEmpty = 0x0643, 109 viotape_CleanCartFound = 0x0644, 110 viotape_CmdNotAllowed = 0x0645, 111 viotape_CmdNotSupported = 0x0646, 112 viotape_DataCheck = 0x0647, 113 viotape_DecompressErr = 0x0648, 114 viotape_DeviceTimeout = 0x0649, 115 viotape_DeviceUnavail = 0x064a, 116 viotape_DeviceBusy = 0x064b, 117 viotape_EndOfMedia = 0x064c, 118 viotape_EndOfTape = 0x064d, 119 viotape_EquipCheck = 0x064e, 120 viotape_InsufficientRs = 0x064f, 121 viotape_InvalidLogBlk = 0x0650, 122 viotape_LengthError = 0x0651, 123 viotape_LibDoorOpen = 0x0652, 124 viotape_LoadFailure = 0x0653, 125 viotape_NotCapable = 0x0654, 126 viotape_NotOperational = 0x0655, 127 viotape_NotReady = 0x0656, 128 viotape_OpCancelled = 0x0657, 129 viotape_PhyLinkErr = 0x0658, 130 viotape_RdyNotBOT = 0x0659, 131 viotape_TapeMark = 0x065a, 132 viotape_WriteProt = 0x065b 133}; 134 135static const struct vio_error_entry viotape_err_table[] = { 136 { viotape_InvalidRange, EIO, "Internal error" }, 137 { viotape_InvalidToken, EIO, "Internal error" }, 138 { viotape_DMAError, EIO, "DMA error" }, 139 { viotape_UseError, EIO, "Internal error" }, 140 { viotape_ReleaseError, EIO, "Internal error" }, 141 { viotape_InvalidTape, EIO, "Invalid tape device" }, 142 { viotape_InvalidOp, EIO, "Invalid operation" }, 143 { viotape_TapeErr, EIO, "Tape error" }, 144 { viotape_AllocTimedOut, EBUSY, "Allocate timed out" }, 145 { viotape_BOTEnc, EIO, "Beginning of tape encountered" }, 146 { viotape_BlankTape, EIO, "Blank tape" }, 147 { viotape_BufferEmpty, EIO, "Buffer empty" }, 148 { viotape_CleanCartFound, ENOMEDIUM, "Cleaning cartridge found" }, 149 { viotape_CmdNotAllowed, EIO, "Command not allowed" }, 150 { viotape_CmdNotSupported, EIO, "Command not supported" }, 151 { viotape_DataCheck, EIO, "Data check" }, 152 { viotape_DecompressErr, EIO, "Decompression error" }, 153 { viotape_DeviceTimeout, EBUSY, "Device timeout" }, 154 { viotape_DeviceUnavail, EIO, "Device unavailable" }, 155 { viotape_DeviceBusy, EBUSY, "Device busy" }, 156 { viotape_EndOfMedia, ENOSPC, "End of media" }, 157 { viotape_EndOfTape, ENOSPC, "End of tape" }, 158 { viotape_EquipCheck, EIO, "Equipment check" }, 159 { viotape_InsufficientRs, EOVERFLOW, "Insufficient tape resources" }, 160 { viotape_InvalidLogBlk, EIO, "Invalid logical block location" }, 161 { viotape_LengthError, EOVERFLOW, "Length error" }, 162 { viotape_LibDoorOpen, EBUSY, "Door open" }, 163 { viotape_LoadFailure, ENOMEDIUM, "Load failure" }, 164 { viotape_NotCapable, EIO, "Not capable" }, 165 { viotape_NotOperational, EIO, "Not operational" }, 166 { viotape_NotReady, EIO, "Not ready" }, 167 { viotape_OpCancelled, EIO, "Operation cancelled" }, 168 { viotape_PhyLinkErr, EIO, "Physical link error" }, 169 { viotape_RdyNotBOT, EIO, "Ready but not beginning of tape" }, 170 { viotape_TapeMark, EIO, "Tape mark" }, 171 { viotape_WriteProt, EROFS, "Write protection error" }, 172 { 0, 0, NULL }, 173}; 174 175/* Maximum number of tapes we support */ 176#define VIOTAPE_MAX_TAPE HVMAXARCHITECTEDVIRTUALTAPES 177#define MAX_PARTITIONS 4 178 179/* defines for current tape state */ 180#define VIOT_IDLE 0 181#define VIOT_READING 1 182#define VIOT_WRITING 2 183 184/* Our info on the tapes */ 185static struct { 186 const char *rsrcname; 187 const char *type; 188 const char *model; 189} viotape_unitinfo[VIOTAPE_MAX_TAPE]; 190 191static struct mtget viomtget[VIOTAPE_MAX_TAPE]; 192 193static struct class *tape_class; 194 195static struct device *tape_device[VIOTAPE_MAX_TAPE]; 196 197/* 198 * maintain the current state of each tape (and partition) 199 * so that we know when to write EOF marks. 200 */ 201static struct { 202 unsigned char cur_part; 203 unsigned char part_stat_rwi[MAX_PARTITIONS]; 204} state[VIOTAPE_MAX_TAPE]; 205 206/* We single-thread */ 207static struct semaphore reqSem; 208 209/* 210 * When we send a request, we use this struct to get the response back 211 * from the interrupt handler 212 */ 213struct op_struct { 214 void *buffer; 215 dma_addr_t dmaaddr; 216 size_t count; 217 int rc; 218 int non_blocking; 219 struct completion com; 220 struct device *dev; 221 struct op_struct *next; 222}; 223 224static spinlock_t op_struct_list_lock; 225static struct op_struct *op_struct_list; 226 227/* forward declaration to resolve interdependence */ 228static int chg_state(int index, unsigned char new_state, struct file *file); 229 230/* procfs support */ 231static int proc_viotape_show(struct seq_file *m, void *v) 232{ 233 int i; 234 235 seq_printf(m, "viotape driver version " VIOTAPE_VERSION "\n"); 236 for (i = 0; i < viotape_numdev; i++) { 237 seq_printf(m, "viotape device %d is iSeries resource %10.10s" 238 "type %4.4s, model %3.3s\n", 239 i, viotape_unitinfo[i].rsrcname, 240 viotape_unitinfo[i].type, 241 viotape_unitinfo[i].model); 242 } 243 return 0; 244} 245 246static int proc_viotape_open(struct inode *inode, struct file *file) 247{ 248 return single_open(file, proc_viotape_show, NULL); 249} 250 251static const struct file_operations proc_viotape_operations = { 252 .open = proc_viotape_open, 253 .read = seq_read, 254 .llseek = seq_lseek, 255 .release = single_release, 256}; 257 258/* Decode the device minor number into its parts */ 259void get_dev_info(struct inode *ino, struct viot_devinfo_struct *devi) 260{ 261 devi->devno = iminor(ino) & 0x1F; 262 devi->mode = (iminor(ino) & 0x60) >> 5; 263 /* if bit is set in the minor, do _not_ rewind automatically */ 264 devi->rewind = (iminor(ino) & 0x80) == 0; 265} 266 267/* This is called only from the exit and init paths, so no need for locking */ 268static void clear_op_struct_pool(void) 269{ 270 while (op_struct_list) { 271 struct op_struct *toFree = op_struct_list; 272 op_struct_list = op_struct_list->next; 273 kfree(toFree); 274 } 275} 276 277/* Likewise, this is only called from the init path */ 278static int add_op_structs(int structs) 279{ 280 int i; 281 282 for (i = 0; i < structs; ++i) { 283 struct op_struct *new_struct = 284 kmalloc(sizeof(*new_struct), GFP_KERNEL); 285 if (!new_struct) { 286 clear_op_struct_pool(); 287 return -ENOMEM; 288 } 289 new_struct->next = op_struct_list; 290 op_struct_list = new_struct; 291 } 292 return 0; 293} 294 295/* Allocate an op structure from our pool */ 296static struct op_struct *get_op_struct(void) 297{ 298 struct op_struct *retval; 299 unsigned long flags; 300 301 spin_lock_irqsave(&op_struct_list_lock, flags); 302 retval = op_struct_list; 303 if (retval) 304 op_struct_list = retval->next; 305 spin_unlock_irqrestore(&op_struct_list_lock, flags); 306 if (retval) { 307 memset(retval, 0, sizeof(*retval)); 308 init_completion(&retval->com); 309 } 310 311 return retval; 312} 313 314/* Return an op structure to our pool */ 315static void free_op_struct(struct op_struct *op_struct) 316{ 317 unsigned long flags; 318 319 spin_lock_irqsave(&op_struct_list_lock, flags); 320 op_struct->next = op_struct_list; 321 op_struct_list = op_struct; 322 spin_unlock_irqrestore(&op_struct_list_lock, flags); 323} 324 325/* Map our tape return codes to errno values */ 326int tape_rc_to_errno(int tape_rc, char *operation, int tapeno) 327{ 328 const struct vio_error_entry *err; 329 330 if (tape_rc == 0) 331 return 0; 332 333 err = vio_lookup_rc(viotape_err_table, tape_rc); 334 printk(VIOTAPE_KERN_WARN "error(%s) 0x%04x on Device %d (%-10s): %s\n", 335 operation, tape_rc, tapeno, 336 viotape_unitinfo[tapeno].rsrcname, err->msg); 337 return -err->errno; 338} 339 340/* Write */ 341static ssize_t viotap_write(struct file *file, const char *buf, 342 size_t count, loff_t * ppos) 343{ 344 HvLpEvent_Rc hvrc; 345 unsigned short flags = file->f_flags; 346 int noblock = ((flags & O_NONBLOCK) != 0); 347 ssize_t ret; 348 struct viot_devinfo_struct devi; 349 struct op_struct *op = get_op_struct(); 350 351 if (op == NULL) 352 return -ENOMEM; 353 354 get_dev_info(file->f_path.dentry->d_inode, &devi); 355 356 /* 357 * We need to make sure we can send a request. We use 358 * a semaphore to keep track of # requests in use. If 359 * we are non-blocking, make sure we don't block on the 360 * semaphore 361 */ 362 if (noblock) { 363 if (down_trylock(&reqSem)) { 364 ret = -EWOULDBLOCK; 365 goto free_op; 366 } 367 } else 368 down(&reqSem); 369 370 /* Allocate a DMA buffer */ 371 op->dev = tape_device[devi.devno]; 372 op->buffer = dma_alloc_coherent(op->dev, count, &op->dmaaddr, 373 GFP_ATOMIC); 374 375 if (op->buffer == NULL) { 376 printk(VIOTAPE_KERN_WARN 377 "error allocating dma buffer for len %ld\n", 378 count); 379 ret = -EFAULT; 380 goto up_sem; 381 } 382 383 /* Copy the data into the buffer */ 384 if (copy_from_user(op->buffer, buf, count)) { 385 printk(VIOTAPE_KERN_WARN "tape: error on copy from user\n"); 386 ret = -EFAULT; 387 goto free_dma; 388 } 389 390 op->non_blocking = noblock; 391 init_completion(&op->com); 392 op->count = count; 393 394 hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, 395 HvLpEvent_Type_VirtualIo, 396 viomajorsubtype_tape | viotapewrite, 397 HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, 398 viopath_sourceinst(viopath_hostLp), 399 viopath_targetinst(viopath_hostLp), 400 (u64)(unsigned long)op, VIOVERSION << 16, 401 ((u64)devi.devno << 48) | op->dmaaddr, count, 0, 0); 402 if (hvrc != HvLpEvent_Rc_Good) { 403 printk(VIOTAPE_KERN_WARN "hv error on op %d\n", 404 (int)hvrc); 405 ret = -EIO; 406 goto free_dma; 407 } 408 409 if (noblock) 410 return count; 411 412 wait_for_completion(&op->com); 413 414 if (op->rc) 415 ret = tape_rc_to_errno(op->rc, "write", devi.devno); 416 else { 417 chg_state(devi.devno, VIOT_WRITING, file); 418 ret = op->count; 419 } 420 421free_dma: 422 dma_free_coherent(op->dev, count, op->buffer, op->dmaaddr); 423up_sem: 424 up(&reqSem); 425free_op: 426 free_op_struct(op); 427 return ret; 428} 429 430/* read */ 431static ssize_t viotap_read(struct file *file, char *buf, size_t count, 432 loff_t *ptr) 433{ 434 HvLpEvent_Rc hvrc; 435 unsigned short flags = file->f_flags; 436 struct op_struct *op = get_op_struct(); 437 int noblock = ((flags & O_NONBLOCK) != 0); 438 ssize_t ret; 439 struct viot_devinfo_struct devi; 440 441 if (op == NULL) 442 return -ENOMEM; 443 444 get_dev_info(file->f_path.dentry->d_inode, &devi); 445 446 /* 447 * We need to make sure we can send a request. We use 448 * a semaphore to keep track of # requests in use. If 449 * we are non-blocking, make sure we don't block on the 450 * semaphore 451 */ 452 if (noblock) { 453 if (down_trylock(&reqSem)) { 454 ret = -EWOULDBLOCK; 455 goto free_op; 456 } 457 } else 458 down(&reqSem); 459 460 chg_state(devi.devno, VIOT_READING, file); 461 462 /* Allocate a DMA buffer */ 463 op->dev = tape_device[devi.devno]; 464 op->buffer = dma_alloc_coherent(op->dev, count, &op->dmaaddr, 465 GFP_ATOMIC); 466 if (op->buffer == NULL) { 467 ret = -EFAULT; 468 goto up_sem; 469 } 470 471 op->count = count; 472 init_completion(&op->com); 473 474 hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, 475 HvLpEvent_Type_VirtualIo, 476 viomajorsubtype_tape | viotaperead, 477 HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, 478 viopath_sourceinst(viopath_hostLp), 479 viopath_targetinst(viopath_hostLp), 480 (u64)(unsigned long)op, VIOVERSION << 16, 481 ((u64)devi.devno << 48) | op->dmaaddr, count, 0, 0); 482 if (hvrc != HvLpEvent_Rc_Good) { 483 printk(VIOTAPE_KERN_WARN "tape hv error on op %d\n", 484 (int)hvrc); 485 ret = -EIO; 486 goto free_dma; 487 } 488 489 wait_for_completion(&op->com); 490 491 if (op->rc) 492 ret = tape_rc_to_errno(op->rc, "read", devi.devno); 493 else { 494 ret = op->count; 495 if (ret && copy_to_user(buf, op->buffer, ret)) { 496 printk(VIOTAPE_KERN_WARN "error on copy_to_user\n"); 497 ret = -EFAULT; 498 } 499 } 500 501free_dma: 502 dma_free_coherent(op->dev, count, op->buffer, op->dmaaddr); 503up_sem: 504 up(&reqSem); 505free_op: 506 free_op_struct(op); 507 return ret; 508} 509 510/* ioctl */ 511static int viotap_ioctl(struct inode *inode, struct file *file, 512 unsigned int cmd, unsigned long arg) 513{ 514 HvLpEvent_Rc hvrc; 515 int ret; 516 struct viot_devinfo_struct devi; 517 struct mtop mtc; 518 u32 myOp; 519 struct op_struct *op = get_op_struct(); 520 521 if (op == NULL) 522 return -ENOMEM; 523 524 get_dev_info(file->f_path.dentry->d_inode, &devi); 525 526 down(&reqSem); 527 528 ret = -EINVAL; 529 530 switch (cmd) { 531 case MTIOCTOP: 532 ret = -EFAULT; 533 /* 534 * inode is null if and only if we (the kernel) 535 * made the request 536 */ 537 if (inode == NULL) 538 memcpy(&mtc, (void *) arg, sizeof(struct mtop)); 539 else if (copy_from_user((char *)&mtc, (char *)arg, 540 sizeof(struct mtop))) 541 goto free_op; 542 543 ret = -EIO; 544 switch (mtc.mt_op) { 545 case MTRESET: 546 myOp = VIOTAPOP_RESET; 547 break; 548 case MTFSF: 549 myOp = VIOTAPOP_FSF; 550 break; 551 case MTBSF: 552 myOp = VIOTAPOP_BSF; 553 break; 554 case MTFSR: 555 myOp = VIOTAPOP_FSR; 556 break; 557 case MTBSR: 558 myOp = VIOTAPOP_BSR; 559 break; 560 case MTWEOF: 561 myOp = VIOTAPOP_WEOF; 562 break; 563 case MTREW: 564 myOp = VIOTAPOP_REW; 565 break; 566 case MTNOP: 567 myOp = VIOTAPOP_NOP; 568 break; 569 case MTEOM: 570 myOp = VIOTAPOP_EOM; 571 break; 572 case MTERASE: 573 myOp = VIOTAPOP_ERASE; 574 break; 575 case MTSETBLK: 576 myOp = VIOTAPOP_SETBLK; 577 break; 578 case MTSETDENSITY: 579 myOp = VIOTAPOP_SETDENSITY; 580 break; 581 case MTTELL: 582 myOp = VIOTAPOP_GETPOS; 583 break; 584 case MTSEEK: 585 myOp = VIOTAPOP_SETPOS; 586 break; 587 case MTSETPART: 588 myOp = VIOTAPOP_SETPART; 589 break; 590 case MTOFFL: 591 myOp = VIOTAPOP_UNLOAD; 592 break; 593 default: 594 printk(VIOTAPE_KERN_WARN "MTIOCTOP called " 595 "with invalid op 0x%x\n", mtc.mt_op); 596 goto free_op; 597 } 598 599 /* 600 * if we moved the head, we are no longer 601 * reading or writing 602 */ 603 switch (mtc.mt_op) { 604 case MTFSF: 605 case MTBSF: 606 case MTFSR: 607 case MTBSR: 608 case MTTELL: 609 case MTSEEK: 610 case MTREW: 611 chg_state(devi.devno, VIOT_IDLE, file); 612 } 613 614 init_completion(&op->com); 615 hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, 616 HvLpEvent_Type_VirtualIo, 617 viomajorsubtype_tape | viotapeop, 618 HvLpEvent_AckInd_DoAck, 619 HvLpEvent_AckType_ImmediateAck, 620 viopath_sourceinst(viopath_hostLp), 621 viopath_targetinst(viopath_hostLp), 622 (u64)(unsigned long)op, 623 VIOVERSION << 16, 624 ((u64)devi.devno << 48), 0, 625 (((u64)myOp) << 32) | mtc.mt_count, 0); 626 if (hvrc != HvLpEvent_Rc_Good) { 627 printk(VIOTAPE_KERN_WARN "hv error on op %d\n", 628 (int)hvrc); 629 goto free_op; 630 } 631 wait_for_completion(&op->com); 632 ret = tape_rc_to_errno(op->rc, "tape operation", devi.devno); 633 goto free_op; 634 635 case MTIOCGET: 636 ret = -EIO; 637 init_completion(&op->com); 638 hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, 639 HvLpEvent_Type_VirtualIo, 640 viomajorsubtype_tape | viotapegetstatus, 641 HvLpEvent_AckInd_DoAck, 642 HvLpEvent_AckType_ImmediateAck, 643 viopath_sourceinst(viopath_hostLp), 644 viopath_targetinst(viopath_hostLp), 645 (u64)(unsigned long)op, VIOVERSION << 16, 646 ((u64)devi.devno << 48), 0, 0, 0); 647 if (hvrc != HvLpEvent_Rc_Good) { 648 printk(VIOTAPE_KERN_WARN "hv error on op %d\n", 649 (int)hvrc); 650 goto free_op; 651 } 652 wait_for_completion(&op->com); 653 654 /* Operation is complete - grab the error code */ 655 ret = tape_rc_to_errno(op->rc, "get status", devi.devno); 656 free_op_struct(op); 657 up(&reqSem); 658 659 if ((ret == 0) && copy_to_user((void *)arg, 660 &viomtget[devi.devno], 661 sizeof(viomtget[0]))) 662 ret = -EFAULT; 663 return ret; 664 case MTIOCPOS: 665 printk(VIOTAPE_KERN_WARN "Got an (unsupported) MTIOCPOS\n"); 666 break; 667 default: 668 printk(VIOTAPE_KERN_WARN "got an unsupported ioctl 0x%0x\n", 669 cmd); 670 break; 671 } 672 673free_op: 674 free_op_struct(op); 675 up(&reqSem); 676 return ret; 677} 678 679static int viotap_open(struct inode *inode, struct file *file) 680{ 681 HvLpEvent_Rc hvrc; 682 struct viot_devinfo_struct devi; 683 int ret; 684 struct op_struct *op = get_op_struct(); 685 686 if (op == NULL) 687 return -ENOMEM; 688 689 get_dev_info(file->f_path.dentry->d_inode, &devi); 690 691 /* Note: We currently only support one mode! */ 692 if ((devi.devno >= viotape_numdev) || (devi.mode)) { 693 ret = -ENODEV; 694 goto free_op; 695 } 696 697 init_completion(&op->com); 698 699 hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, 700 HvLpEvent_Type_VirtualIo, 701 viomajorsubtype_tape | viotapeopen, 702 HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, 703 viopath_sourceinst(viopath_hostLp), 704 viopath_targetinst(viopath_hostLp), 705 (u64)(unsigned long)op, VIOVERSION << 16, 706 ((u64)devi.devno << 48), 0, 0, 0); 707 if (hvrc != 0) { 708 printk(VIOTAPE_KERN_WARN "bad rc on signalLpEvent %d\n", 709 (int) hvrc); 710 ret = -EIO; 711 goto free_op; 712 } 713 714 wait_for_completion(&op->com); 715 ret = tape_rc_to_errno(op->rc, "open", devi.devno); 716 717free_op: 718 free_op_struct(op); 719 return ret; 720} 721 722 723static int viotap_release(struct inode *inode, struct file *file) 724{ 725 HvLpEvent_Rc hvrc; 726 struct viot_devinfo_struct devi; 727 int ret = 0; 728 struct op_struct *op = get_op_struct(); 729 730 if (op == NULL) 731 return -ENOMEM; 732 init_completion(&op->com); 733 734 get_dev_info(file->f_path.dentry->d_inode, &devi); 735 736 if (devi.devno >= viotape_numdev) { 737 ret = -ENODEV; 738 goto free_op; 739 } 740 741 chg_state(devi.devno, VIOT_IDLE, file); 742 743 if (devi.rewind) { 744 hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, 745 HvLpEvent_Type_VirtualIo, 746 viomajorsubtype_tape | viotapeop, 747 HvLpEvent_AckInd_DoAck, 748 HvLpEvent_AckType_ImmediateAck, 749 viopath_sourceinst(viopath_hostLp), 750 viopath_targetinst(viopath_hostLp), 751 (u64)(unsigned long)op, VIOVERSION << 16, 752 ((u64)devi.devno << 48), 0, 753 ((u64)VIOTAPOP_REW) << 32, 0); 754 wait_for_completion(&op->com); 755 756 tape_rc_to_errno(op->rc, "rewind", devi.devno); 757 } 758 759 hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, 760 HvLpEvent_Type_VirtualIo, 761 viomajorsubtype_tape | viotapeclose, 762 HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, 763 viopath_sourceinst(viopath_hostLp), 764 viopath_targetinst(viopath_hostLp), 765 (u64)(unsigned long)op, VIOVERSION << 16, 766 ((u64)devi.devno << 48), 0, 0, 0); 767 if (hvrc != 0) { 768 printk(VIOTAPE_KERN_WARN "bad rc on signalLpEvent %d\n", 769 (int) hvrc); 770 ret = -EIO; 771 goto free_op; 772 } 773 774 wait_for_completion(&op->com); 775 776 if (op->rc) 777 printk(VIOTAPE_KERN_WARN "close failed\n"); 778 779free_op: 780 free_op_struct(op); 781 return ret; 782} 783 784const struct file_operations viotap_fops = { 785 .owner = THIS_MODULE, 786 .read = viotap_read, 787 .write = viotap_write, 788 .ioctl = viotap_ioctl, 789 .open = viotap_open, 790 .release = viotap_release, 791}; 792 793/* Handle interrupt events for tape */ 794static void vioHandleTapeEvent(struct HvLpEvent *event) 795{ 796 int tapeminor; 797 struct op_struct *op; 798 struct viotapelpevent *tevent = (struct viotapelpevent *)event; 799 800 if (event == NULL) { 801 /* Notification that a partition went away! */ 802 if (!viopath_isactive(viopath_hostLp)) { 803 /* TODO! Clean up */ 804 } 805 return; 806 } 807 808 tapeminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK; 809 op = (struct op_struct *)event->xCorrelationToken; 810 switch (tapeminor) { 811 case viotapeopen: 812 case viotapeclose: 813 op->rc = tevent->sub_type_result; 814 complete(&op->com); 815 break; 816 case viotaperead: 817 op->rc = tevent->sub_type_result; 818 op->count = tevent->len; 819 complete(&op->com); 820 break; 821 case viotapewrite: 822 if (op->non_blocking) { 823 dma_free_coherent(op->dev, op->count, 824 op->buffer, op->dmaaddr); 825 free_op_struct(op); 826 up(&reqSem); 827 } else { 828 op->rc = tevent->sub_type_result; 829 op->count = tevent->len; 830 complete(&op->com); 831 } 832 break; 833 case viotapeop: 834 case viotapegetpos: 835 case viotapesetpos: 836 case viotapegetstatus: 837 if (op) { 838 op->count = tevent->u.op.count; 839 op->rc = tevent->sub_type_result; 840 if (!op->non_blocking) 841 complete(&op->com); 842 } 843 break; 844 default: 845 printk(VIOTAPE_KERN_WARN "weird ack\n"); 846 } 847} 848 849static int viotape_probe(struct vio_dev *vdev, const struct vio_device_id *id) 850{ 851 int i = vdev->unit_address; 852 int j; 853 struct device_node *node = vdev->dev.archdata.of_node; 854 855 if (i > VIOTAPE_MAX_TAPE) 856 return -ENODEV; 857 if (!node) 858 return -ENODEV; 859 860 if (i >= viotape_numdev) 861 viotape_numdev = i + 1; 862 863 tape_device[i] = &vdev->dev; 864 viotape_unitinfo[i].rsrcname = of_get_property(node, 865 "linux,vio_rsrcname", NULL); 866 viotape_unitinfo[i].type = of_get_property(node, "linux,vio_type", 867 NULL); 868 viotape_unitinfo[i].model = of_get_property(node, "linux,vio_model", 869 NULL); 870 871 state[i].cur_part = 0; 872 for (j = 0; j < MAX_PARTITIONS; ++j) 873 state[i].part_stat_rwi[j] = VIOT_IDLE; 874 device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i), 875 "iseries!vt%d", i); 876 device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i | 0x80), 877 "iseries!nvt%d", i); 878 printk(VIOTAPE_KERN_INFO "tape iseries/vt%d is iSeries " 879 "resource %10.10s type %4.4s, model %3.3s\n", 880 i, viotape_unitinfo[i].rsrcname, 881 viotape_unitinfo[i].type, viotape_unitinfo[i].model); 882 return 0; 883} 884 885static int viotape_remove(struct vio_dev *vdev) 886{ 887 int i = vdev->unit_address; 888 889 device_destroy(tape_class, MKDEV(VIOTAPE_MAJOR, i | 0x80)); 890 device_destroy(tape_class, MKDEV(VIOTAPE_MAJOR, i)); 891 return 0; 892} 893 894/** 895 * viotape_device_table: Used by vio.c to match devices that we 896 * support. 897 */ 898static struct vio_device_id viotape_device_table[] __devinitdata = { 899 { "byte", "IBM,iSeries-viotape" }, 900 { "", "" } 901}; 902MODULE_DEVICE_TABLE(vio, viotape_device_table); 903 904static struct vio_driver viotape_driver = { 905 .id_table = viotape_device_table, 906 .probe = viotape_probe, 907 .remove = viotape_remove, 908 .driver = { 909 .name = "viotape", 910 .owner = THIS_MODULE, 911 } 912}; 913 914 915int __init viotap_init(void) 916{ 917 int ret; 918 struct proc_dir_entry *e; 919 920 if (!firmware_has_feature(FW_FEATURE_ISERIES)) 921 return -ENODEV; 922 923 op_struct_list = NULL; 924 if ((ret = add_op_structs(VIOTAPE_MAXREQ)) < 0) { 925 printk(VIOTAPE_KERN_WARN "couldn't allocate op structs\n"); 926 return ret; 927 } 928 spin_lock_init(&op_struct_list_lock); 929 930 sema_init(&reqSem, VIOTAPE_MAXREQ); 931 932 if (viopath_hostLp == HvLpIndexInvalid) { 933 vio_set_hostlp(); 934 if (viopath_hostLp == HvLpIndexInvalid) { 935 ret = -ENODEV; 936 goto clear_op; 937 } 938 } 939 940 ret = viopath_open(viopath_hostLp, viomajorsubtype_tape, 941 VIOTAPE_MAXREQ + 2); 942 if (ret) { 943 printk(VIOTAPE_KERN_WARN 944 "error on viopath_open to hostlp %d\n", ret); 945 ret = -EIO; 946 goto clear_op; 947 } 948 949 printk(VIOTAPE_KERN_INFO "vers " VIOTAPE_VERSION 950 ", hosting partition %d\n", viopath_hostLp); 951 952 vio_setHandler(viomajorsubtype_tape, vioHandleTapeEvent); 953 954 ret = register_chrdev(VIOTAPE_MAJOR, "viotape", &viotap_fops); 955 if (ret < 0) { 956 printk(VIOTAPE_KERN_WARN "Error registering viotape device\n"); 957 goto clear_handler; 958 } 959 960 tape_class = class_create(THIS_MODULE, "tape"); 961 if (IS_ERR(tape_class)) { 962 printk(VIOTAPE_KERN_WARN "Unable to allocat class\n"); 963 ret = PTR_ERR(tape_class); 964 goto unreg_chrdev; 965 } 966 967 ret = vio_register_driver(&viotape_driver); 968 if (ret) 969 goto unreg_class; 970 971 e = create_proc_entry("iSeries/viotape", S_IFREG|S_IRUGO, NULL); 972 if (e) { 973 e->owner = THIS_MODULE; 974 e->proc_fops = &proc_viotape_operations; 975 } 976 977 return 0; 978 979unreg_class: 980 class_destroy(tape_class); 981unreg_chrdev: 982 unregister_chrdev(VIOTAPE_MAJOR, "viotape"); 983clear_handler: 984 vio_clearHandler(viomajorsubtype_tape); 985 viopath_close(viopath_hostLp, viomajorsubtype_tape, VIOTAPE_MAXREQ + 2); 986clear_op: 987 clear_op_struct_pool(); 988 return ret; 989} 990 991/* Give a new state to the tape object */ 992static int chg_state(int index, unsigned char new_state, struct file *file) 993{ 994 unsigned char *cur_state = 995 &state[index].part_stat_rwi[state[index].cur_part]; 996 int rc = 0; 997 998 /* if the same state, don't bother */ 999 if (*cur_state == new_state) 1000 return 0; 1001 1002 /* write an EOF if changing from writing to some other state */ 1003 if (*cur_state == VIOT_WRITING) { 1004 struct mtop write_eof = { MTWEOF, 1 }; 1005 1006 rc = viotap_ioctl(NULL, file, MTIOCTOP, 1007 (unsigned long)&write_eof); 1008 } 1009 *cur_state = new_state; 1010 return rc; 1011} 1012 1013/* Cleanup */ 1014static void __exit viotap_exit(void) 1015{ 1016 remove_proc_entry("iSeries/viotape", NULL); 1017 vio_unregister_driver(&viotape_driver); 1018 class_destroy(tape_class); 1019 unregister_chrdev(VIOTAPE_MAJOR, "viotape"); 1020 viopath_close(viopath_hostLp, viomajorsubtype_tape, VIOTAPE_MAXREQ + 2); 1021 vio_clearHandler(viomajorsubtype_tape); 1022 clear_op_struct_pool(); 1023} 1024 1025MODULE_LICENSE("GPL"); 1026module_init(viotap_init); 1027module_exit(viotap_exit);