Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at 17431928194b36a0f88082df875e2e036da7fddf 136 lines 3.9 kB view raw
1/*====================================================================== 2 3 Device driver for the PCMCIA control functionality of StrongARM 4 SA-1100 microprocessors. 5 6 The contents of this file are subject to the Mozilla Public 7 License Version 1.1 (the "License"); you may not use this file 8 except in compliance with the License. You may obtain a copy of 9 the License at http://www.mozilla.org/MPL/ 10 11 Software distributed under the License is distributed on an "AS 12 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or 13 implied. See the License for the specific language governing 14 rights and limitations under the License. 15 16 The initial developer of the original code is John G. Dorsey 17 <john+@cs.cmu.edu>. Portions created by John G. Dorsey are 18 Copyright (C) 1999 John G. Dorsey. All Rights Reserved. 19 20 Alternatively, the contents of this file may be used under the 21 terms of the GNU Public License version 2 (the "GPL"), in which 22 case the provisions of the GPL are applicable instead of the 23 above. If you wish to allow the use of your version of this file 24 only under the terms of the GPL and not to allow others to use 25 your version of this file under the MPL, indicate your decision 26 by deleting the provisions above and replace them with the notice 27 and other provisions required by the GPL. If you do not delete 28 the provisions above, a recipient may use your version of this 29 file under either the MPL or the GPL. 30 31======================================================================*/ 32 33#include <linux/module.h> 34#include <linux/init.h> 35#include <linux/slab.h> 36#include <linux/platform_device.h> 37 38#include <pcmcia/cs_types.h> 39#include <pcmcia/cs.h> 40#include <pcmcia/ss.h> 41 42#include <asm/hardware/scoop.h> 43 44#include "sa1100_generic.h" 45 46int __init pcmcia_collie_init(struct device *dev); 47 48static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = { 49#ifdef CONFIG_SA1100_ASSABET 50 pcmcia_assabet_init, 51#endif 52#ifdef CONFIG_SA1100_CERF 53 pcmcia_cerf_init, 54#endif 55#if defined(CONFIG_SA1100_H3100) || defined(CONFIG_SA1100_H3600) 56 pcmcia_h3600_init, 57#endif 58#ifdef CONFIG_SA1100_SHANNON 59 pcmcia_shannon_init, 60#endif 61#ifdef CONFIG_SA1100_SIMPAD 62 pcmcia_simpad_init, 63#endif 64#ifdef CONFIG_SA1100_COLLIE 65 pcmcia_collie_init, 66#endif 67}; 68 69static int sa11x0_drv_pcmcia_probe(struct platform_device *dev) 70{ 71 int i, ret = -ENODEV; 72 73 /* 74 * Initialise any "on-board" PCMCIA sockets. 75 */ 76 for (i = 0; i < ARRAY_SIZE(sa11x0_pcmcia_hw_init); i++) { 77 ret = sa11x0_pcmcia_hw_init[i](&dev->dev); 78 if (ret == 0) 79 break; 80 } 81 82 return ret; 83} 84 85static int sa11x0_drv_pcmcia_remove(struct platform_device *dev) 86{ 87 struct skt_dev_info *sinfo = platform_get_drvdata(dev); 88 int i; 89 90 platform_set_drvdata(dev, NULL); 91 92 for (i = 0; i < sinfo->nskt; i++) 93 soc_pcmcia_remove_one(&sinfo->skt[i]); 94 95 kfree(sinfo); 96 return 0; 97} 98 99static struct platform_driver sa11x0_pcmcia_driver = { 100 .driver = { 101 .name = "sa11x0-pcmcia", 102 .owner = THIS_MODULE, 103 }, 104 .probe = sa11x0_drv_pcmcia_probe, 105 .remove = sa11x0_drv_pcmcia_remove, 106}; 107 108/* sa11x0_pcmcia_init() 109 * ^^^^^^^^^^^^^^^^^^^^ 110 * 111 * This routine performs low-level PCMCIA initialization and then 112 * registers this socket driver with Card Services. 113 * 114 * Returns: 0 on success, -ve error code on failure 115 */ 116static int __init sa11x0_pcmcia_init(void) 117{ 118 return platform_driver_register(&sa11x0_pcmcia_driver); 119} 120 121/* sa11x0_pcmcia_exit() 122 * ^^^^^^^^^^^^^^^^^^^^ 123 * Invokes the low-level kernel service to free IRQs associated with this 124 * socket controller and reset GPIO edge detection. 125 */ 126static void __exit sa11x0_pcmcia_exit(void) 127{ 128 platform_driver_unregister(&sa11x0_pcmcia_driver); 129} 130 131MODULE_AUTHOR("John Dorsey <john+@cs.cmu.edu>"); 132MODULE_DESCRIPTION("Linux PCMCIA Card Services: SA-11x0 Socket Controller"); 133MODULE_LICENSE("Dual MPL/GPL"); 134 135fs_initcall(sa11x0_pcmcia_init); 136module_exit(sa11x0_pcmcia_exit);