tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00dump
23 Abstract: Data structures for the rt2x00debug & userspace.
24 */
25
26#ifndef RT2X00DUMP_H
27#define RT2X00DUMP_H
28
29/**
30 * DOC: Introduction
31 *
32 * This header is intended to be exported to userspace,
33 * to make the structures and enumerations available to userspace
34 * applications. This means that all data types should be exportable.
35 *
36 * When rt2x00 is compiled with debugfs support enabled,
37 * it is possible to capture all data coming in and out of the device
38 * by reading the frame dump file. This file can have only a single reader.
39 * The following frames will be reported:
40 * - All incoming frames (rx)
41 * - All outgoing frames (tx, including beacon and atim)
42 * - All completed frames (txdone including atim)
43 *
44 * The data is send to the file using the following format:
45 *
46 * [rt2x00dump header][hardware descriptor][ieee802.11 frame]
47 *
48 * rt2x00dump header: The description of the dumped frame, as well as
49 * additional information usefull for debugging. See &rt2x00dump_hdr.
50 * hardware descriptor: Descriptor that was used to receive or transmit
51 * the frame.
52 * ieee802.11 frame: The actual frame that was received or transmitted.
53 */
54
55/**
56 * enum rt2x00_dump_type - Frame type
57 *
58 * These values are used for the @type member of &rt2x00dump_hdr.
59 * @DUMP_FRAME_RXDONE: This frame has been received by the hardware.
60 * @DUMP_FRAME_TX: This frame is queued for transmission to the hardware.
61 * @DUMP_FRAME_TXDONE: This frame indicates the device has handled
62 * the tx event which has either succeeded or failed. A frame
63 * with this type should also have been reported with as a
64 * %DUMP_FRAME_TX frame.
65 * @DUMP_FRAME_BEACON: This beacon frame is queued for transmission to the
66 * hardware.
67 */
68enum rt2x00_dump_type {
69 DUMP_FRAME_RXDONE = 1,
70 DUMP_FRAME_TX = 2,
71 DUMP_FRAME_TXDONE = 3,
72 DUMP_FRAME_BEACON = 4,
73};
74
75/**
76 * struct rt2x00dump_hdr - Dump frame header
77 *
78 * Each frame dumped to the debugfs file starts with this header
79 * attached. This header contains the description of the actual
80 * frame which was dumped.
81 *
82 * New fields inside the structure must be appended to the end of
83 * the structure. This way userspace tools compiled for earlier
84 * header versions can still correctly handle the frame dump
85 * (although they will not handle all data passed to them in the dump).
86 *
87 * @version: Header version should always be set to %DUMP_HEADER_VERSION.
88 * This field must be checked by userspace to determine if it can
89 * handle this frame.
90 * @header_length: The length of the &rt2x00dump_hdr structure. This is
91 * used for compatibility reasons so userspace can easily determine
92 * the location of the next field in the dump.
93 * @desc_length: The length of the device descriptor.
94 * @data_length: The length of the frame data (including the ieee802.11 header.
95 * @chip_rt: RT chipset
96 * @chip_rf: RF chipset
97 * @chip_rev: Chipset revision
98 * @type: The frame type (&rt2x00_dump_type)
99 * @queue_index: The index number of the data queue.
100 * @entry_index: The index number of the entry inside the data queue.
101 * @timestamp_sec: Timestamp - seconds
102 * @timestamp_usec: Timestamp - microseconds
103 */
104struct rt2x00dump_hdr {
105 __le32 version;
106#define DUMP_HEADER_VERSION 2
107
108 __le32 header_length;
109 __le32 desc_length;
110 __le32 data_length;
111
112 __le16 chip_rt;
113 __le16 chip_rf;
114 __le32 chip_rev;
115
116 __le16 type;
117 __u8 queue_index;
118 __u8 entry_index;
119
120 __le32 timestamp_sec;
121 __le32 timestamp_usec;
122};
123
124#endif /* RT2X00DUMP_H */