Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at 17431928194b36a0f88082df875e2e036da7fddf 1834 lines 51 kB view raw
1/**************************************************************************** 2 * Driver for Solarflare Solarstorm network controllers and boards 3 * Copyright 2005-2006 Fen Systems Ltd. 4 * Copyright 2006-2009 Solarflare Communications Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License version 2 as published 8 * by the Free Software Foundation, incorporated herein by reference. 9 */ 10 11#include <linux/bitops.h> 12#include <linux/delay.h> 13#include <linux/pci.h> 14#include <linux/module.h> 15#include <linux/seq_file.h> 16#include <linux/i2c.h> 17#include <linux/mii.h> 18#include <linux/slab.h> 19#include "net_driver.h" 20#include "bitfield.h" 21#include "efx.h" 22#include "mac.h" 23#include "spi.h" 24#include "nic.h" 25#include "regs.h" 26#include "io.h" 27#include "mdio_10g.h" 28#include "phy.h" 29#include "workarounds.h" 30 31/* Hardware control for SFC4000 (aka Falcon). */ 32 33static const unsigned int 34/* "Large" EEPROM device: Atmel AT25640 or similar 35 * 8 KB, 16-bit address, 32 B write block */ 36large_eeprom_type = ((13 << SPI_DEV_TYPE_SIZE_LBN) 37 | (2 << SPI_DEV_TYPE_ADDR_LEN_LBN) 38 | (5 << SPI_DEV_TYPE_BLOCK_SIZE_LBN)), 39/* Default flash device: Atmel AT25F1024 40 * 128 KB, 24-bit address, 32 KB erase block, 256 B write block */ 41default_flash_type = ((17 << SPI_DEV_TYPE_SIZE_LBN) 42 | (3 << SPI_DEV_TYPE_ADDR_LEN_LBN) 43 | (0x52 << SPI_DEV_TYPE_ERASE_CMD_LBN) 44 | (15 << SPI_DEV_TYPE_ERASE_SIZE_LBN) 45 | (8 << SPI_DEV_TYPE_BLOCK_SIZE_LBN)); 46 47/************************************************************************** 48 * 49 * I2C bus - this is a bit-bashing interface using GPIO pins 50 * Note that it uses the output enables to tristate the outputs 51 * SDA is the data pin and SCL is the clock 52 * 53 ************************************************************************** 54 */ 55static void falcon_setsda(void *data, int state) 56{ 57 struct efx_nic *efx = (struct efx_nic *)data; 58 efx_oword_t reg; 59 60 efx_reado(efx, &reg, FR_AB_GPIO_CTL); 61 EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO3_OEN, !state); 62 efx_writeo(efx, &reg, FR_AB_GPIO_CTL); 63} 64 65static void falcon_setscl(void *data, int state) 66{ 67 struct efx_nic *efx = (struct efx_nic *)data; 68 efx_oword_t reg; 69 70 efx_reado(efx, &reg, FR_AB_GPIO_CTL); 71 EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO0_OEN, !state); 72 efx_writeo(efx, &reg, FR_AB_GPIO_CTL); 73} 74 75static int falcon_getsda(void *data) 76{ 77 struct efx_nic *efx = (struct efx_nic *)data; 78 efx_oword_t reg; 79 80 efx_reado(efx, &reg, FR_AB_GPIO_CTL); 81 return EFX_OWORD_FIELD(reg, FRF_AB_GPIO3_IN); 82} 83 84static int falcon_getscl(void *data) 85{ 86 struct efx_nic *efx = (struct efx_nic *)data; 87 efx_oword_t reg; 88 89 efx_reado(efx, &reg, FR_AB_GPIO_CTL); 90 return EFX_OWORD_FIELD(reg, FRF_AB_GPIO0_IN); 91} 92 93static struct i2c_algo_bit_data falcon_i2c_bit_operations = { 94 .setsda = falcon_setsda, 95 .setscl = falcon_setscl, 96 .getsda = falcon_getsda, 97 .getscl = falcon_getscl, 98 .udelay = 5, 99 /* Wait up to 50 ms for slave to let us pull SCL high */ 100 .timeout = DIV_ROUND_UP(HZ, 20), 101}; 102 103static void falcon_push_irq_moderation(struct efx_channel *channel) 104{ 105 efx_dword_t timer_cmd; 106 struct efx_nic *efx = channel->efx; 107 108 /* Set timer register */ 109 if (channel->irq_moderation) { 110 EFX_POPULATE_DWORD_2(timer_cmd, 111 FRF_AB_TC_TIMER_MODE, 112 FFE_BB_TIMER_MODE_INT_HLDOFF, 113 FRF_AB_TC_TIMER_VAL, 114 channel->irq_moderation - 1); 115 } else { 116 EFX_POPULATE_DWORD_2(timer_cmd, 117 FRF_AB_TC_TIMER_MODE, 118 FFE_BB_TIMER_MODE_DIS, 119 FRF_AB_TC_TIMER_VAL, 0); 120 } 121 BUILD_BUG_ON(FR_AA_TIMER_COMMAND_KER != FR_BZ_TIMER_COMMAND_P0); 122 efx_writed_page_locked(efx, &timer_cmd, FR_BZ_TIMER_COMMAND_P0, 123 channel->channel); 124} 125 126static void falcon_deconfigure_mac_wrapper(struct efx_nic *efx); 127 128static void falcon_prepare_flush(struct efx_nic *efx) 129{ 130 falcon_deconfigure_mac_wrapper(efx); 131 132 /* Wait for the tx and rx fifo's to get to the next packet boundary 133 * (~1ms without back-pressure), then to drain the remainder of the 134 * fifo's at data path speeds (negligible), with a healthy margin. */ 135 msleep(10); 136} 137 138/* Acknowledge a legacy interrupt from Falcon 139 * 140 * This acknowledges a legacy (not MSI) interrupt via INT_ACK_KER_REG. 141 * 142 * Due to SFC bug 3706 (silicon revision <=A1) reads can be duplicated in the 143 * BIU. Interrupt acknowledge is read sensitive so must write instead 144 * (then read to ensure the BIU collector is flushed) 145 * 146 * NB most hardware supports MSI interrupts 147 */ 148inline void falcon_irq_ack_a1(struct efx_nic *efx) 149{ 150 efx_dword_t reg; 151 152 EFX_POPULATE_DWORD_1(reg, FRF_AA_INT_ACK_KER_FIELD, 0xb7eb7e); 153 efx_writed(efx, &reg, FR_AA_INT_ACK_KER); 154 efx_readd(efx, &reg, FR_AA_WORK_AROUND_BROKEN_PCI_READS); 155} 156 157 158irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id) 159{ 160 struct efx_nic *efx = dev_id; 161 efx_oword_t *int_ker = efx->irq_status.addr; 162 struct efx_channel *channel; 163 int syserr; 164 int queues; 165 166 /* Check to see if this is our interrupt. If it isn't, we 167 * exit without having touched the hardware. 168 */ 169 if (unlikely(EFX_OWORD_IS_ZERO(*int_ker))) { 170 EFX_TRACE(efx, "IRQ %d on CPU %d not for me\n", irq, 171 raw_smp_processor_id()); 172 return IRQ_NONE; 173 } 174 efx->last_irq_cpu = raw_smp_processor_id(); 175 EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_OWORD_FMT "\n", 176 irq, raw_smp_processor_id(), EFX_OWORD_VAL(*int_ker)); 177 178 /* Determine interrupting queues, clear interrupt status 179 * register and acknowledge the device interrupt. 180 */ 181 BUILD_BUG_ON(FSF_AZ_NET_IVEC_INT_Q_WIDTH > EFX_MAX_CHANNELS); 182 queues = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_INT_Q); 183 184 /* Check to see if we have a serious error condition */ 185 if (queues & (1U << efx->fatal_irq_level)) { 186 syserr = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_FATAL_INT); 187 if (unlikely(syserr)) 188 return efx_nic_fatal_interrupt(efx); 189 } 190 191 EFX_ZERO_OWORD(*int_ker); 192 wmb(); /* Ensure the vector is cleared before interrupt ack */ 193 falcon_irq_ack_a1(efx); 194 195 /* Schedule processing of any interrupting queues */ 196 channel = &efx->channel[0]; 197 while (queues) { 198 if (queues & 0x01) 199 efx_schedule_channel(channel); 200 channel++; 201 queues >>= 1; 202 } 203 204 return IRQ_HANDLED; 205} 206/************************************************************************** 207 * 208 * EEPROM/flash 209 * 210 ************************************************************************** 211 */ 212 213#define FALCON_SPI_MAX_LEN sizeof(efx_oword_t) 214 215static int falcon_spi_poll(struct efx_nic *efx) 216{ 217 efx_oword_t reg; 218 efx_reado(efx, &reg, FR_AB_EE_SPI_HCMD); 219 return EFX_OWORD_FIELD(reg, FRF_AB_EE_SPI_HCMD_CMD_EN) ? -EBUSY : 0; 220} 221 222/* Wait for SPI command completion */ 223static int falcon_spi_wait(struct efx_nic *efx) 224{ 225 /* Most commands will finish quickly, so we start polling at 226 * very short intervals. Sometimes the command may have to 227 * wait for VPD or expansion ROM access outside of our 228 * control, so we allow up to 100 ms. */ 229 unsigned long timeout = jiffies + 1 + DIV_ROUND_UP(HZ, 10); 230 int i; 231 232 for (i = 0; i < 10; i++) { 233 if (!falcon_spi_poll(efx)) 234 return 0; 235 udelay(10); 236 } 237 238 for (;;) { 239 if (!falcon_spi_poll(efx)) 240 return 0; 241 if (time_after_eq(jiffies, timeout)) { 242 EFX_ERR(efx, "timed out waiting for SPI\n"); 243 return -ETIMEDOUT; 244 } 245 schedule_timeout_uninterruptible(1); 246 } 247} 248 249int falcon_spi_cmd(struct efx_nic *efx, const struct efx_spi_device *spi, 250 unsigned int command, int address, 251 const void *in, void *out, size_t len) 252{ 253 bool addressed = (address >= 0); 254 bool reading = (out != NULL); 255 efx_oword_t reg; 256 int rc; 257 258 /* Input validation */ 259 if (len > FALCON_SPI_MAX_LEN) 260 return -EINVAL; 261 BUG_ON(!mutex_is_locked(&efx->spi_lock)); 262 263 /* Check that previous command is not still running */ 264 rc = falcon_spi_poll(efx); 265 if (rc) 266 return rc; 267 268 /* Program address register, if we have an address */ 269 if (addressed) { 270 EFX_POPULATE_OWORD_1(reg, FRF_AB_EE_SPI_HADR_ADR, address); 271 efx_writeo(efx, &reg, FR_AB_EE_SPI_HADR); 272 } 273 274 /* Program data register, if we have data */ 275 if (in != NULL) { 276 memcpy(&reg, in, len); 277 efx_writeo(efx, &reg, FR_AB_EE_SPI_HDATA); 278 } 279 280 /* Issue read/write command */ 281 EFX_POPULATE_OWORD_7(reg, 282 FRF_AB_EE_SPI_HCMD_CMD_EN, 1, 283 FRF_AB_EE_SPI_HCMD_SF_SEL, spi->device_id, 284 FRF_AB_EE_SPI_HCMD_DABCNT, len, 285 FRF_AB_EE_SPI_HCMD_READ, reading, 286 FRF_AB_EE_SPI_HCMD_DUBCNT, 0, 287 FRF_AB_EE_SPI_HCMD_ADBCNT, 288 (addressed ? spi->addr_len : 0), 289 FRF_AB_EE_SPI_HCMD_ENC, command); 290 efx_writeo(efx, &reg, FR_AB_EE_SPI_HCMD); 291 292 /* Wait for read/write to complete */ 293 rc = falcon_spi_wait(efx); 294 if (rc) 295 return rc; 296 297 /* Read data */ 298 if (out != NULL) { 299 efx_reado(efx, &reg, FR_AB_EE_SPI_HDATA); 300 memcpy(out, &reg, len); 301 } 302 303 return 0; 304} 305 306static size_t 307falcon_spi_write_limit(const struct efx_spi_device *spi, size_t start) 308{ 309 return min(FALCON_SPI_MAX_LEN, 310 (spi->block_size - (start & (spi->block_size - 1)))); 311} 312 313static inline u8 314efx_spi_munge_command(const struct efx_spi_device *spi, 315 const u8 command, const unsigned int address) 316{ 317 return command | (((address >> 8) & spi->munge_address) << 3); 318} 319 320/* Wait up to 10 ms for buffered write completion */ 321int 322falcon_spi_wait_write(struct efx_nic *efx, const struct efx_spi_device *spi) 323{ 324 unsigned long timeout = jiffies + 1 + DIV_ROUND_UP(HZ, 100); 325 u8 status; 326 int rc; 327 328 for (;;) { 329 rc = falcon_spi_cmd(efx, spi, SPI_RDSR, -1, NULL, 330 &status, sizeof(status)); 331 if (rc) 332 return rc; 333 if (!(status & SPI_STATUS_NRDY)) 334 return 0; 335 if (time_after_eq(jiffies, timeout)) { 336 EFX_ERR(efx, "SPI write timeout on device %d" 337 " last status=0x%02x\n", 338 spi->device_id, status); 339 return -ETIMEDOUT; 340 } 341 schedule_timeout_uninterruptible(1); 342 } 343} 344 345int falcon_spi_read(struct efx_nic *efx, const struct efx_spi_device *spi, 346 loff_t start, size_t len, size_t *retlen, u8 *buffer) 347{ 348 size_t block_len, pos = 0; 349 unsigned int command; 350 int rc = 0; 351 352 while (pos < len) { 353 block_len = min(len - pos, FALCON_SPI_MAX_LEN); 354 355 command = efx_spi_munge_command(spi, SPI_READ, start + pos); 356 rc = falcon_spi_cmd(efx, spi, command, start + pos, NULL, 357 buffer + pos, block_len); 358 if (rc) 359 break; 360 pos += block_len; 361 362 /* Avoid locking up the system */ 363 cond_resched(); 364 if (signal_pending(current)) { 365 rc = -EINTR; 366 break; 367 } 368 } 369 370 if (retlen) 371 *retlen = pos; 372 return rc; 373} 374 375int 376falcon_spi_write(struct efx_nic *efx, const struct efx_spi_device *spi, 377 loff_t start, size_t len, size_t *retlen, const u8 *buffer) 378{ 379 u8 verify_buffer[FALCON_SPI_MAX_LEN]; 380 size_t block_len, pos = 0; 381 unsigned int command; 382 int rc = 0; 383 384 while (pos < len) { 385 rc = falcon_spi_cmd(efx, spi, SPI_WREN, -1, NULL, NULL, 0); 386 if (rc) 387 break; 388 389 block_len = min(len - pos, 390 falcon_spi_write_limit(spi, start + pos)); 391 command = efx_spi_munge_command(spi, SPI_WRITE, start + pos); 392 rc = falcon_spi_cmd(efx, spi, command, start + pos, 393 buffer + pos, NULL, block_len); 394 if (rc) 395 break; 396 397 rc = falcon_spi_wait_write(efx, spi); 398 if (rc) 399 break; 400 401 command = efx_spi_munge_command(spi, SPI_READ, start + pos); 402 rc = falcon_spi_cmd(efx, spi, command, start + pos, 403 NULL, verify_buffer, block_len); 404 if (memcmp(verify_buffer, buffer + pos, block_len)) { 405 rc = -EIO; 406 break; 407 } 408 409 pos += block_len; 410 411 /* Avoid locking up the system */ 412 cond_resched(); 413 if (signal_pending(current)) { 414 rc = -EINTR; 415 break; 416 } 417 } 418 419 if (retlen) 420 *retlen = pos; 421 return rc; 422} 423 424/************************************************************************** 425 * 426 * MAC wrapper 427 * 428 ************************************************************************** 429 */ 430 431static void falcon_push_multicast_hash(struct efx_nic *efx) 432{ 433 union efx_multicast_hash *mc_hash = &efx->multicast_hash; 434 435 WARN_ON(!mutex_is_locked(&efx->mac_lock)); 436 437 efx_writeo(efx, &mc_hash->oword[0], FR_AB_MAC_MC_HASH_REG0); 438 efx_writeo(efx, &mc_hash->oword[1], FR_AB_MAC_MC_HASH_REG1); 439} 440 441static void falcon_reset_macs(struct efx_nic *efx) 442{ 443 struct falcon_nic_data *nic_data = efx->nic_data; 444 efx_oword_t reg, mac_ctrl; 445 int count; 446 447 if (efx_nic_rev(efx) < EFX_REV_FALCON_B0) { 448 /* It's not safe to use GLB_CTL_REG to reset the 449 * macs, so instead use the internal MAC resets 450 */ 451 if (!EFX_IS10G(efx)) { 452 EFX_POPULATE_OWORD_1(reg, FRF_AB_GM_SW_RST, 1); 453 efx_writeo(efx, &reg, FR_AB_GM_CFG1); 454 udelay(1000); 455 456 EFX_POPULATE_OWORD_1(reg, FRF_AB_GM_SW_RST, 0); 457 efx_writeo(efx, &reg, FR_AB_GM_CFG1); 458 udelay(1000); 459 return; 460 } else { 461 EFX_POPULATE_OWORD_1(reg, FRF_AB_XM_CORE_RST, 1); 462 efx_writeo(efx, &reg, FR_AB_XM_GLB_CFG); 463 464 for (count = 0; count < 10000; count++) { 465 efx_reado(efx, &reg, FR_AB_XM_GLB_CFG); 466 if (EFX_OWORD_FIELD(reg, FRF_AB_XM_CORE_RST) == 467 0) 468 return; 469 udelay(10); 470 } 471 472 EFX_ERR(efx, "timed out waiting for XMAC core reset\n"); 473 } 474 } 475 476 /* Mac stats will fail whist the TX fifo is draining */ 477 WARN_ON(nic_data->stats_disable_count == 0); 478 479 efx_reado(efx, &mac_ctrl, FR_AB_MAC_CTRL); 480 EFX_SET_OWORD_FIELD(mac_ctrl, FRF_BB_TXFIFO_DRAIN_EN, 1); 481 efx_writeo(efx, &mac_ctrl, FR_AB_MAC_CTRL); 482 483 efx_reado(efx, &reg, FR_AB_GLB_CTL); 484 EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_XGTX, 1); 485 EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_XGRX, 1); 486 EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_EM, 1); 487 efx_writeo(efx, &reg, FR_AB_GLB_CTL); 488 489 count = 0; 490 while (1) { 491 efx_reado(efx, &reg, FR_AB_GLB_CTL); 492 if (!EFX_OWORD_FIELD(reg, FRF_AB_RST_XGTX) && 493 !EFX_OWORD_FIELD(reg, FRF_AB_RST_XGRX) && 494 !EFX_OWORD_FIELD(reg, FRF_AB_RST_EM)) { 495 EFX_LOG(efx, "Completed MAC reset after %d loops\n", 496 count); 497 break; 498 } 499 if (count > 20) { 500 EFX_ERR(efx, "MAC reset failed\n"); 501 break; 502 } 503 count++; 504 udelay(10); 505 } 506 507 /* Ensure the correct MAC is selected before statistics 508 * are re-enabled by the caller */ 509 efx_writeo(efx, &mac_ctrl, FR_AB_MAC_CTRL); 510 511 /* This can run even when the GMAC is selected */ 512 falcon_setup_xaui(efx); 513} 514 515void falcon_drain_tx_fifo(struct efx_nic *efx) 516{ 517 efx_oword_t reg; 518 519 if ((efx_nic_rev(efx) < EFX_REV_FALCON_B0) || 520 (efx->loopback_mode != LOOPBACK_NONE)) 521 return; 522 523 efx_reado(efx, &reg, FR_AB_MAC_CTRL); 524 /* There is no point in draining more than once */ 525 if (EFX_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN)) 526 return; 527 528 falcon_reset_macs(efx); 529} 530 531static void falcon_deconfigure_mac_wrapper(struct efx_nic *efx) 532{ 533 efx_oword_t reg; 534 535 if (efx_nic_rev(efx) < EFX_REV_FALCON_B0) 536 return; 537 538 /* Isolate the MAC -> RX */ 539 efx_reado(efx, &reg, FR_AZ_RX_CFG); 540 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 0); 541 efx_writeo(efx, &reg, FR_AZ_RX_CFG); 542 543 /* Isolate TX -> MAC */ 544 falcon_drain_tx_fifo(efx); 545} 546 547void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) 548{ 549 struct efx_link_state *link_state = &efx->link_state; 550 efx_oword_t reg; 551 int link_speed; 552 553 switch (link_state->speed) { 554 case 10000: link_speed = 3; break; 555 case 1000: link_speed = 2; break; 556 case 100: link_speed = 1; break; 557 default: link_speed = 0; break; 558 } 559 /* MAC_LINK_STATUS controls MAC backpressure but doesn't work 560 * as advertised. Disable to ensure packets are not 561 * indefinitely held and TX queue can be flushed at any point 562 * while the link is down. */ 563 EFX_POPULATE_OWORD_5(reg, 564 FRF_AB_MAC_XOFF_VAL, 0xffff /* max pause time */, 565 FRF_AB_MAC_BCAD_ACPT, 1, 566 FRF_AB_MAC_UC_PROM, efx->promiscuous, 567 FRF_AB_MAC_LINK_STATUS, 1, /* always set */ 568 FRF_AB_MAC_SPEED, link_speed); 569 /* On B0, MAC backpressure can be disabled and packets get 570 * discarded. */ 571 if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) { 572 EFX_SET_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN, 573 !link_state->up); 574 } 575 576 efx_writeo(efx, &reg, FR_AB_MAC_CTRL); 577 578 /* Restore the multicast hash registers. */ 579 falcon_push_multicast_hash(efx); 580 581 efx_reado(efx, &reg, FR_AZ_RX_CFG); 582 /* Enable XOFF signal from RX FIFO (we enabled it during NIC 583 * initialisation but it may read back as 0) */ 584 EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, 1); 585 /* Unisolate the MAC -> RX */ 586 if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) 587 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1); 588 efx_writeo(efx, &reg, FR_AZ_RX_CFG); 589} 590 591static void falcon_stats_request(struct efx_nic *efx) 592{ 593 struct falcon_nic_data *nic_data = efx->nic_data; 594 efx_oword_t reg; 595 596 WARN_ON(nic_data->stats_pending); 597 WARN_ON(nic_data->stats_disable_count); 598 599 if (nic_data->stats_dma_done == NULL) 600 return; /* no mac selected */ 601 602 *nic_data->stats_dma_done = FALCON_STATS_NOT_DONE; 603 nic_data->stats_pending = true; 604 wmb(); /* ensure done flag is clear */ 605 606 /* Initiate DMA transfer of stats */ 607 EFX_POPULATE_OWORD_2(reg, 608 FRF_AB_MAC_STAT_DMA_CMD, 1, 609 FRF_AB_MAC_STAT_DMA_ADR, 610 efx->stats_buffer.dma_addr); 611 efx_writeo(efx, &reg, FR_AB_MAC_STAT_DMA); 612 613 mod_timer(&nic_data->stats_timer, round_jiffies_up(jiffies + HZ / 2)); 614} 615 616static void falcon_stats_complete(struct efx_nic *efx) 617{ 618 struct falcon_nic_data *nic_data = efx->nic_data; 619 620 if (!nic_data->stats_pending) 621 return; 622 623 nic_data->stats_pending = 0; 624 if (*nic_data->stats_dma_done == FALCON_STATS_DONE) { 625 rmb(); /* read the done flag before the stats */ 626 efx->mac_op->update_stats(efx); 627 } else { 628 EFX_ERR(efx, "timed out waiting for statistics\n"); 629 } 630} 631 632static void falcon_stats_timer_func(unsigned long context) 633{ 634 struct efx_nic *efx = (struct efx_nic *)context; 635 struct falcon_nic_data *nic_data = efx->nic_data; 636 637 spin_lock(&efx->stats_lock); 638 639 falcon_stats_complete(efx); 640 if (nic_data->stats_disable_count == 0) 641 falcon_stats_request(efx); 642 643 spin_unlock(&efx->stats_lock); 644} 645 646static void falcon_switch_mac(struct efx_nic *efx); 647 648static bool falcon_loopback_link_poll(struct efx_nic *efx) 649{ 650 struct efx_link_state old_state = efx->link_state; 651 652 WARN_ON(!mutex_is_locked(&efx->mac_lock)); 653 WARN_ON(!LOOPBACK_INTERNAL(efx)); 654 655 efx->link_state.fd = true; 656 efx->link_state.fc = efx->wanted_fc; 657 efx->link_state.up = true; 658 659 if (efx->loopback_mode == LOOPBACK_GMAC) 660 efx->link_state.speed = 1000; 661 else 662 efx->link_state.speed = 10000; 663 664 return !efx_link_state_equal(&efx->link_state, &old_state); 665} 666 667static int falcon_reconfigure_port(struct efx_nic *efx) 668{ 669 int rc; 670 671 WARN_ON(efx_nic_rev(efx) > EFX_REV_FALCON_B0); 672 673 /* Poll the PHY link state *before* reconfiguring it. This means we 674 * will pick up the correct speed (in loopback) to select the correct 675 * MAC. 676 */ 677 if (LOOPBACK_INTERNAL(efx)) 678 falcon_loopback_link_poll(efx); 679 else 680 efx->phy_op->poll(efx); 681 682 falcon_stop_nic_stats(efx); 683 falcon_deconfigure_mac_wrapper(efx); 684 685 falcon_switch_mac(efx); 686 687 efx->phy_op->reconfigure(efx); 688 rc = efx->mac_op->reconfigure(efx); 689 BUG_ON(rc); 690 691 falcon_start_nic_stats(efx); 692 693 /* Synchronise efx->link_state with the kernel */ 694 efx_link_status_changed(efx); 695 696 return 0; 697} 698 699/************************************************************************** 700 * 701 * PHY access via GMII 702 * 703 ************************************************************************** 704 */ 705 706/* Wait for GMII access to complete */ 707static int falcon_gmii_wait(struct efx_nic *efx) 708{ 709 efx_oword_t md_stat; 710 int count; 711 712 /* wait upto 50ms - taken max from datasheet */ 713 for (count = 0; count < 5000; count++) { 714 efx_reado(efx, &md_stat, FR_AB_MD_STAT); 715 if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSY) == 0) { 716 if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_LNFL) != 0 || 717 EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSERR) != 0) { 718 EFX_ERR(efx, "error from GMII access " 719 EFX_OWORD_FMT"\n", 720 EFX_OWORD_VAL(md_stat)); 721 return -EIO; 722 } 723 return 0; 724 } 725 udelay(10); 726 } 727 EFX_ERR(efx, "timed out waiting for GMII\n"); 728 return -ETIMEDOUT; 729} 730 731/* Write an MDIO register of a PHY connected to Falcon. */ 732static int falcon_mdio_write(struct net_device *net_dev, 733 int prtad, int devad, u16 addr, u16 value) 734{ 735 struct efx_nic *efx = netdev_priv(net_dev); 736 efx_oword_t reg; 737 int rc; 738 739 EFX_REGDUMP(efx, "writing MDIO %d register %d.%d with 0x%04x\n", 740 prtad, devad, addr, value); 741 742 mutex_lock(&efx->mdio_lock); 743 744 /* Check MDIO not currently being accessed */ 745 rc = falcon_gmii_wait(efx); 746 if (rc) 747 goto out; 748 749 /* Write the address/ID register */ 750 EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_PHY_ADR, addr); 751 efx_writeo(efx, &reg, FR_AB_MD_PHY_ADR); 752 753 EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_PRT_ADR, prtad, 754 FRF_AB_MD_DEV_ADR, devad); 755 efx_writeo(efx, &reg, FR_AB_MD_ID); 756 757 /* Write data */ 758 EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_TXD, value); 759 efx_writeo(efx, &reg, FR_AB_MD_TXD); 760 761 EFX_POPULATE_OWORD_2(reg, 762 FRF_AB_MD_WRC, 1, 763 FRF_AB_MD_GC, 0); 764 efx_writeo(efx, &reg, FR_AB_MD_CS); 765 766 /* Wait for data to be written */ 767 rc = falcon_gmii_wait(efx); 768 if (rc) { 769 /* Abort the write operation */ 770 EFX_POPULATE_OWORD_2(reg, 771 FRF_AB_MD_WRC, 0, 772 FRF_AB_MD_GC, 1); 773 efx_writeo(efx, &reg, FR_AB_MD_CS); 774 udelay(10); 775 } 776 777out: 778 mutex_unlock(&efx->mdio_lock); 779 return rc; 780} 781 782/* Read an MDIO register of a PHY connected to Falcon. */ 783static int falcon_mdio_read(struct net_device *net_dev, 784 int prtad, int devad, u16 addr) 785{ 786 struct efx_nic *efx = netdev_priv(net_dev); 787 efx_oword_t reg; 788 int rc; 789 790 mutex_lock(&efx->mdio_lock); 791 792 /* Check MDIO not currently being accessed */ 793 rc = falcon_gmii_wait(efx); 794 if (rc) 795 goto out; 796 797 EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_PHY_ADR, addr); 798 efx_writeo(efx, &reg, FR_AB_MD_PHY_ADR); 799 800 EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_PRT_ADR, prtad, 801 FRF_AB_MD_DEV_ADR, devad); 802 efx_writeo(efx, &reg, FR_AB_MD_ID); 803 804 /* Request data to be read */ 805 EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_RDC, 1, FRF_AB_MD_GC, 0); 806 efx_writeo(efx, &reg, FR_AB_MD_CS); 807 808 /* Wait for data to become available */ 809 rc = falcon_gmii_wait(efx); 810 if (rc == 0) { 811 efx_reado(efx, &reg, FR_AB_MD_RXD); 812 rc = EFX_OWORD_FIELD(reg, FRF_AB_MD_RXD); 813 EFX_REGDUMP(efx, "read from MDIO %d register %d.%d, got %04x\n", 814 prtad, devad, addr, rc); 815 } else { 816 /* Abort the read operation */ 817 EFX_POPULATE_OWORD_2(reg, 818 FRF_AB_MD_RIC, 0, 819 FRF_AB_MD_GC, 1); 820 efx_writeo(efx, &reg, FR_AB_MD_CS); 821 822 EFX_LOG(efx, "read from MDIO %d register %d.%d, got error %d\n", 823 prtad, devad, addr, rc); 824 } 825 826out: 827 mutex_unlock(&efx->mdio_lock); 828 return rc; 829} 830 831static void falcon_clock_mac(struct efx_nic *efx) 832{ 833 unsigned strap_val; 834 efx_oword_t nic_stat; 835 836 /* Configure the NIC generated MAC clock correctly */ 837 efx_reado(efx, &nic_stat, FR_AB_NIC_STAT); 838 strap_val = EFX_IS10G(efx) ? 5 : 3; 839 if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) { 840 EFX_SET_OWORD_FIELD(nic_stat, FRF_BB_EE_STRAP_EN, 1); 841 EFX_SET_OWORD_FIELD(nic_stat, FRF_BB_EE_STRAP, strap_val); 842 efx_writeo(efx, &nic_stat, FR_AB_NIC_STAT); 843 } else { 844 /* Falcon A1 does not support 1G/10G speed switching 845 * and must not be used with a PHY that does. */ 846 BUG_ON(EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_PINS) != 847 strap_val); 848 } 849} 850 851static void falcon_switch_mac(struct efx_nic *efx) 852{ 853 struct efx_mac_operations *old_mac_op = efx->mac_op; 854 struct falcon_nic_data *nic_data = efx->nic_data; 855 unsigned int stats_done_offset; 856 857 WARN_ON(!mutex_is_locked(&efx->mac_lock)); 858 WARN_ON(nic_data->stats_disable_count == 0); 859 860 efx->mac_op = (EFX_IS10G(efx) ? 861 &falcon_xmac_operations : &falcon_gmac_operations); 862 863 if (EFX_IS10G(efx)) 864 stats_done_offset = XgDmaDone_offset; 865 else 866 stats_done_offset = GDmaDone_offset; 867 nic_data->stats_dma_done = efx->stats_buffer.addr + stats_done_offset; 868 869 if (old_mac_op == efx->mac_op) 870 return; 871 872 falcon_clock_mac(efx); 873 874 EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G'); 875 /* Not all macs support a mac-level link state */ 876 efx->xmac_poll_required = false; 877 falcon_reset_macs(efx); 878} 879 880/* This call is responsible for hooking in the MAC and PHY operations */ 881static int falcon_probe_port(struct efx_nic *efx) 882{ 883 int rc; 884 885 switch (efx->phy_type) { 886 case PHY_TYPE_SFX7101: 887 efx->phy_op = &falcon_sfx7101_phy_ops; 888 break; 889 case PHY_TYPE_SFT9001A: 890 case PHY_TYPE_SFT9001B: 891 efx->phy_op = &falcon_sft9001_phy_ops; 892 break; 893 case PHY_TYPE_QT2022C2: 894 case PHY_TYPE_QT2025C: 895 efx->phy_op = &falcon_qt202x_phy_ops; 896 break; 897 default: 898 EFX_ERR(efx, "Unknown PHY type %d\n", 899 efx->phy_type); 900 return -ENODEV; 901 } 902 903 /* Fill out MDIO structure and loopback modes */ 904 efx->mdio.mdio_read = falcon_mdio_read; 905 efx->mdio.mdio_write = falcon_mdio_write; 906 rc = efx->phy_op->probe(efx); 907 if (rc != 0) 908 return rc; 909 910 /* Initial assumption */ 911 efx->link_state.speed = 10000; 912 efx->link_state.fd = true; 913 914 /* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */ 915 if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) 916 efx->wanted_fc = EFX_FC_RX | EFX_FC_TX; 917 else 918 efx->wanted_fc = EFX_FC_RX; 919 if (efx->mdio.mmds & MDIO_DEVS_AN) 920 efx->wanted_fc |= EFX_FC_AUTO; 921 922 /* Allocate buffer for stats */ 923 rc = efx_nic_alloc_buffer(efx, &efx->stats_buffer, 924 FALCON_MAC_STATS_SIZE); 925 if (rc) 926 return rc; 927 EFX_LOG(efx, "stats buffer at %llx (virt %p phys %llx)\n", 928 (u64)efx->stats_buffer.dma_addr, 929 efx->stats_buffer.addr, 930 (u64)virt_to_phys(efx->stats_buffer.addr)); 931 932 return 0; 933} 934 935static void falcon_remove_port(struct efx_nic *efx) 936{ 937 efx->phy_op->remove(efx); 938 efx_nic_free_buffer(efx, &efx->stats_buffer); 939} 940 941/************************************************************************** 942 * 943 * Falcon test code 944 * 945 **************************************************************************/ 946 947static int 948falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out) 949{ 950 struct falcon_nvconfig *nvconfig; 951 struct efx_spi_device *spi; 952 void *region; 953 int rc, magic_num, struct_ver; 954 __le16 *word, *limit; 955 u32 csum; 956 957 spi = efx->spi_flash ? efx->spi_flash : efx->spi_eeprom; 958 if (!spi) 959 return -EINVAL; 960 961 region = kmalloc(FALCON_NVCONFIG_END, GFP_KERNEL); 962 if (!region) 963 return -ENOMEM; 964 nvconfig = region + FALCON_NVCONFIG_OFFSET; 965 966 mutex_lock(&efx->spi_lock); 967 rc = falcon_spi_read(efx, spi, 0, FALCON_NVCONFIG_END, NULL, region); 968 mutex_unlock(&efx->spi_lock); 969 if (rc) { 970 EFX_ERR(efx, "Failed to read %s\n", 971 efx->spi_flash ? "flash" : "EEPROM"); 972 rc = -EIO; 973 goto out; 974 } 975 976 magic_num = le16_to_cpu(nvconfig->board_magic_num); 977 struct_ver = le16_to_cpu(nvconfig->board_struct_ver); 978 979 rc = -EINVAL; 980 if (magic_num != FALCON_NVCONFIG_BOARD_MAGIC_NUM) { 981 EFX_ERR(efx, "NVRAM bad magic 0x%x\n", magic_num); 982 goto out; 983 } 984 if (struct_ver < 2) { 985 EFX_ERR(efx, "NVRAM has ancient version 0x%x\n", struct_ver); 986 goto out; 987 } else if (struct_ver < 4) { 988 word = &nvconfig->board_magic_num; 989 limit = (__le16 *) (nvconfig + 1); 990 } else { 991 word = region; 992 limit = region + FALCON_NVCONFIG_END; 993 } 994 for (csum = 0; word < limit; ++word) 995 csum += le16_to_cpu(*word); 996 997 if (~csum & 0xffff) { 998 EFX_ERR(efx, "NVRAM has incorrect checksum\n"); 999 goto out; 1000 } 1001 1002 rc = 0; 1003 if (nvconfig_out) 1004 memcpy(nvconfig_out, nvconfig, sizeof(*nvconfig)); 1005 1006 out: 1007 kfree(region); 1008 return rc; 1009} 1010 1011static int falcon_test_nvram(struct efx_nic *efx) 1012{ 1013 return falcon_read_nvram(efx, NULL); 1014} 1015 1016static const struct efx_nic_register_test falcon_b0_register_tests[] = { 1017 { FR_AZ_ADR_REGION, 1018 EFX_OWORD32(0x0003FFFF, 0x0003FFFF, 0x0003FFFF, 0x0003FFFF) }, 1019 { FR_AZ_RX_CFG, 1020 EFX_OWORD32(0xFFFFFFFE, 0x00017FFF, 0x00000000, 0x00000000) }, 1021 { FR_AZ_TX_CFG, 1022 EFX_OWORD32(0x7FFF0037, 0x00000000, 0x00000000, 0x00000000) }, 1023 { FR_AZ_TX_RESERVED, 1024 EFX_OWORD32(0xFFFEFE80, 0x1FFFFFFF, 0x020000FE, 0x007FFFFF) }, 1025 { FR_AB_MAC_CTRL, 1026 EFX_OWORD32(0xFFFF0000, 0x00000000, 0x00000000, 0x00000000) }, 1027 { FR_AZ_SRM_TX_DC_CFG, 1028 EFX_OWORD32(0x001FFFFF, 0x00000000, 0x00000000, 0x00000000) }, 1029 { FR_AZ_RX_DC_CFG, 1030 EFX_OWORD32(0x0000000F, 0x00000000, 0x00000000, 0x00000000) }, 1031 { FR_AZ_RX_DC_PF_WM, 1032 EFX_OWORD32(0x000003FF, 0x00000000, 0x00000000, 0x00000000) }, 1033 { FR_BZ_DP_CTRL, 1034 EFX_OWORD32(0x00000FFF, 0x00000000, 0x00000000, 0x00000000) }, 1035 { FR_AB_GM_CFG2, 1036 EFX_OWORD32(0x00007337, 0x00000000, 0x00000000, 0x00000000) }, 1037 { FR_AB_GMF_CFG0, 1038 EFX_OWORD32(0x00001F1F, 0x00000000, 0x00000000, 0x00000000) }, 1039 { FR_AB_XM_GLB_CFG, 1040 EFX_OWORD32(0x00000C68, 0x00000000, 0x00000000, 0x00000000) }, 1041 { FR_AB_XM_TX_CFG, 1042 EFX_OWORD32(0x00080164, 0x00000000, 0x00000000, 0x00000000) }, 1043 { FR_AB_XM_RX_CFG, 1044 EFX_OWORD32(0x07100A0C, 0x00000000, 0x00000000, 0x00000000) }, 1045 { FR_AB_XM_RX_PARAM, 1046 EFX_OWORD32(0x00001FF8, 0x00000000, 0x00000000, 0x00000000) }, 1047 { FR_AB_XM_FC, 1048 EFX_OWORD32(0xFFFF0001, 0x00000000, 0x00000000, 0x00000000) }, 1049 { FR_AB_XM_ADR_LO, 1050 EFX_OWORD32(0xFFFFFFFF, 0x00000000, 0x00000000, 0x00000000) }, 1051 { FR_AB_XX_SD_CTL, 1052 EFX_OWORD32(0x0003FF0F, 0x00000000, 0x00000000, 0x00000000) }, 1053}; 1054 1055static int falcon_b0_test_registers(struct efx_nic *efx) 1056{ 1057 return efx_nic_test_registers(efx, falcon_b0_register_tests, 1058 ARRAY_SIZE(falcon_b0_register_tests)); 1059} 1060 1061/************************************************************************** 1062 * 1063 * Device reset 1064 * 1065 ************************************************************************** 1066 */ 1067 1068/* Resets NIC to known state. This routine must be called in process 1069 * context and is allowed to sleep. */ 1070static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method) 1071{ 1072 struct falcon_nic_data *nic_data = efx->nic_data; 1073 efx_oword_t glb_ctl_reg_ker; 1074 int rc; 1075 1076 EFX_LOG(efx, "performing %s hardware reset\n", RESET_TYPE(method)); 1077 1078 /* Initiate device reset */ 1079 if (method == RESET_TYPE_WORLD) { 1080 rc = pci_save_state(efx->pci_dev); 1081 if (rc) { 1082 EFX_ERR(efx, "failed to backup PCI state of primary " 1083 "function prior to hardware reset\n"); 1084 goto fail1; 1085 } 1086 if (efx_nic_is_dual_func(efx)) { 1087 rc = pci_save_state(nic_data->pci_dev2); 1088 if (rc) { 1089 EFX_ERR(efx, "failed to backup PCI state of " 1090 "secondary function prior to " 1091 "hardware reset\n"); 1092 goto fail2; 1093 } 1094 } 1095 1096 EFX_POPULATE_OWORD_2(glb_ctl_reg_ker, 1097 FRF_AB_EXT_PHY_RST_DUR, 1098 FFE_AB_EXT_PHY_RST_DUR_10240US, 1099 FRF_AB_SWRST, 1); 1100 } else { 1101 EFX_POPULATE_OWORD_7(glb_ctl_reg_ker, 1102 /* exclude PHY from "invisible" reset */ 1103 FRF_AB_EXT_PHY_RST_CTL, 1104 method == RESET_TYPE_INVISIBLE, 1105 /* exclude EEPROM/flash and PCIe */ 1106 FRF_AB_PCIE_CORE_RST_CTL, 1, 1107 FRF_AB_PCIE_NSTKY_RST_CTL, 1, 1108 FRF_AB_PCIE_SD_RST_CTL, 1, 1109 FRF_AB_EE_RST_CTL, 1, 1110 FRF_AB_EXT_PHY_RST_DUR, 1111 FFE_AB_EXT_PHY_RST_DUR_10240US, 1112 FRF_AB_SWRST, 1); 1113 } 1114 efx_writeo(efx, &glb_ctl_reg_ker, FR_AB_GLB_CTL); 1115 1116 EFX_LOG(efx, "waiting for hardware reset\n"); 1117 schedule_timeout_uninterruptible(HZ / 20); 1118 1119 /* Restore PCI configuration if needed */ 1120 if (method == RESET_TYPE_WORLD) { 1121 if (efx_nic_is_dual_func(efx)) { 1122 rc = pci_restore_state(nic_data->pci_dev2); 1123 if (rc) { 1124 EFX_ERR(efx, "failed to restore PCI config for " 1125 "the secondary function\n"); 1126 goto fail3; 1127 } 1128 } 1129 rc = pci_restore_state(efx->pci_dev); 1130 if (rc) { 1131 EFX_ERR(efx, "failed to restore PCI config for the " 1132 "primary function\n"); 1133 goto fail4; 1134 } 1135 EFX_LOG(efx, "successfully restored PCI config\n"); 1136 } 1137 1138 /* Assert that reset complete */ 1139 efx_reado(efx, &glb_ctl_reg_ker, FR_AB_GLB_CTL); 1140 if (EFX_OWORD_FIELD(glb_ctl_reg_ker, FRF_AB_SWRST) != 0) { 1141 rc = -ETIMEDOUT; 1142 EFX_ERR(efx, "timed out waiting for hardware reset\n"); 1143 goto fail5; 1144 } 1145 EFX_LOG(efx, "hardware reset complete\n"); 1146 1147 return 0; 1148 1149 /* pci_save_state() and pci_restore_state() MUST be called in pairs */ 1150fail2: 1151fail3: 1152 pci_restore_state(efx->pci_dev); 1153fail1: 1154fail4: 1155fail5: 1156 return rc; 1157} 1158 1159static void falcon_monitor(struct efx_nic *efx) 1160{ 1161 bool link_changed; 1162 int rc; 1163 1164 BUG_ON(!mutex_is_locked(&efx->mac_lock)); 1165 1166 rc = falcon_board(efx)->type->monitor(efx); 1167 if (rc) { 1168 EFX_ERR(efx, "Board sensor %s; shutting down PHY\n", 1169 (rc == -ERANGE) ? "reported fault" : "failed"); 1170 efx->phy_mode |= PHY_MODE_LOW_POWER; 1171 rc = __efx_reconfigure_port(efx); 1172 WARN_ON(rc); 1173 } 1174 1175 if (LOOPBACK_INTERNAL(efx)) 1176 link_changed = falcon_loopback_link_poll(efx); 1177 else 1178 link_changed = efx->phy_op->poll(efx); 1179 1180 if (link_changed) { 1181 falcon_stop_nic_stats(efx); 1182 falcon_deconfigure_mac_wrapper(efx); 1183 1184 falcon_switch_mac(efx); 1185 rc = efx->mac_op->reconfigure(efx); 1186 BUG_ON(rc); 1187 1188 falcon_start_nic_stats(efx); 1189 1190 efx_link_status_changed(efx); 1191 } 1192 1193 if (EFX_IS10G(efx)) 1194 falcon_poll_xmac(efx); 1195} 1196 1197/* Zeroes out the SRAM contents. This routine must be called in 1198 * process context and is allowed to sleep. 1199 */ 1200static int falcon_reset_sram(struct efx_nic *efx) 1201{ 1202 efx_oword_t srm_cfg_reg_ker, gpio_cfg_reg_ker; 1203 int count; 1204 1205 /* Set the SRAM wake/sleep GPIO appropriately. */ 1206 efx_reado(efx, &gpio_cfg_reg_ker, FR_AB_GPIO_CTL); 1207 EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, FRF_AB_GPIO1_OEN, 1); 1208 EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, FRF_AB_GPIO1_OUT, 1); 1209 efx_writeo(efx, &gpio_cfg_reg_ker, FR_AB_GPIO_CTL); 1210 1211 /* Initiate SRAM reset */ 1212 EFX_POPULATE_OWORD_2(srm_cfg_reg_ker, 1213 FRF_AZ_SRM_INIT_EN, 1, 1214 FRF_AZ_SRM_NB_SZ, 0); 1215 efx_writeo(efx, &srm_cfg_reg_ker, FR_AZ_SRM_CFG); 1216 1217 /* Wait for SRAM reset to complete */ 1218 count = 0; 1219 do { 1220 EFX_LOG(efx, "waiting for SRAM reset (attempt %d)...\n", count); 1221 1222 /* SRAM reset is slow; expect around 16ms */ 1223 schedule_timeout_uninterruptible(HZ / 50); 1224 1225 /* Check for reset complete */ 1226 efx_reado(efx, &srm_cfg_reg_ker, FR_AZ_SRM_CFG); 1227 if (!EFX_OWORD_FIELD(srm_cfg_reg_ker, FRF_AZ_SRM_INIT_EN)) { 1228 EFX_LOG(efx, "SRAM reset complete\n"); 1229 1230 return 0; 1231 } 1232 } while (++count < 20); /* wait upto 0.4 sec */ 1233 1234 EFX_ERR(efx, "timed out waiting for SRAM reset\n"); 1235 return -ETIMEDOUT; 1236} 1237 1238static int falcon_spi_device_init(struct efx_nic *efx, 1239 struct efx_spi_device **spi_device_ret, 1240 unsigned int device_id, u32 device_type) 1241{ 1242 struct efx_spi_device *spi_device; 1243 1244 if (device_type != 0) { 1245 spi_device = kzalloc(sizeof(*spi_device), GFP_KERNEL); 1246 if (!spi_device) 1247 return -ENOMEM; 1248 spi_device->device_id = device_id; 1249 spi_device->size = 1250 1 << SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_SIZE); 1251 spi_device->addr_len = 1252 SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_ADDR_LEN); 1253 spi_device->munge_address = (spi_device->size == 1 << 9 && 1254 spi_device->addr_len == 1); 1255 spi_device->erase_command = 1256 SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_ERASE_CMD); 1257 spi_device->erase_size = 1258 1 << SPI_DEV_TYPE_FIELD(device_type, 1259 SPI_DEV_TYPE_ERASE_SIZE); 1260 spi_device->block_size = 1261 1 << SPI_DEV_TYPE_FIELD(device_type, 1262 SPI_DEV_TYPE_BLOCK_SIZE); 1263 } else { 1264 spi_device = NULL; 1265 } 1266 1267 kfree(*spi_device_ret); 1268 *spi_device_ret = spi_device; 1269 return 0; 1270} 1271 1272static void falcon_remove_spi_devices(struct efx_nic *efx) 1273{ 1274 kfree(efx->spi_eeprom); 1275 efx->spi_eeprom = NULL; 1276 kfree(efx->spi_flash); 1277 efx->spi_flash = NULL; 1278} 1279 1280/* Extract non-volatile configuration */ 1281static int falcon_probe_nvconfig(struct efx_nic *efx) 1282{ 1283 struct falcon_nvconfig *nvconfig; 1284 int board_rev; 1285 int rc; 1286 1287 nvconfig = kmalloc(sizeof(*nvconfig), GFP_KERNEL); 1288 if (!nvconfig) 1289 return -ENOMEM; 1290 1291 rc = falcon_read_nvram(efx, nvconfig); 1292 if (rc == -EINVAL) { 1293 EFX_ERR(efx, "NVRAM is invalid therefore using defaults\n"); 1294 efx->phy_type = PHY_TYPE_NONE; 1295 efx->mdio.prtad = MDIO_PRTAD_NONE; 1296 board_rev = 0; 1297 rc = 0; 1298 } else if (rc) { 1299 goto fail1; 1300 } else { 1301 struct falcon_nvconfig_board_v2 *v2 = &nvconfig->board_v2; 1302 struct falcon_nvconfig_board_v3 *v3 = &nvconfig->board_v3; 1303 1304 efx->phy_type = v2->port0_phy_type; 1305 efx->mdio.prtad = v2->port0_phy_addr; 1306 board_rev = le16_to_cpu(v2->board_revision); 1307 1308 if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) { 1309 rc = falcon_spi_device_init( 1310 efx, &efx->spi_flash, FFE_AB_SPI_DEVICE_FLASH, 1311 le32_to_cpu(v3->spi_device_type 1312 [FFE_AB_SPI_DEVICE_FLASH])); 1313 if (rc) 1314 goto fail2; 1315 rc = falcon_spi_device_init( 1316 efx, &efx->spi_eeprom, FFE_AB_SPI_DEVICE_EEPROM, 1317 le32_to_cpu(v3->spi_device_type 1318 [FFE_AB_SPI_DEVICE_EEPROM])); 1319 if (rc) 1320 goto fail2; 1321 } 1322 } 1323 1324 /* Read the MAC addresses */ 1325 memcpy(efx->mac_address, nvconfig->mac_address[0], ETH_ALEN); 1326 1327 EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mdio.prtad); 1328 1329 rc = falcon_probe_board(efx, board_rev); 1330 if (rc) 1331 goto fail2; 1332 1333 kfree(nvconfig); 1334 return 0; 1335 1336 fail2: 1337 falcon_remove_spi_devices(efx); 1338 fail1: 1339 kfree(nvconfig); 1340 return rc; 1341} 1342 1343/* Probe all SPI devices on the NIC */ 1344static void falcon_probe_spi_devices(struct efx_nic *efx) 1345{ 1346 efx_oword_t nic_stat, gpio_ctl, ee_vpd_cfg; 1347 int boot_dev; 1348 1349 efx_reado(efx, &gpio_ctl, FR_AB_GPIO_CTL); 1350 efx_reado(efx, &nic_stat, FR_AB_NIC_STAT); 1351 efx_reado(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0); 1352 1353 if (EFX_OWORD_FIELD(gpio_ctl, FRF_AB_GPIO3_PWRUP_VALUE)) { 1354 boot_dev = (EFX_OWORD_FIELD(nic_stat, FRF_AB_SF_PRST) ? 1355 FFE_AB_SPI_DEVICE_FLASH : FFE_AB_SPI_DEVICE_EEPROM); 1356 EFX_LOG(efx, "Booted from %s\n", 1357 boot_dev == FFE_AB_SPI_DEVICE_FLASH ? "flash" : "EEPROM"); 1358 } else { 1359 /* Disable VPD and set clock dividers to safe 1360 * values for initial programming. */ 1361 boot_dev = -1; 1362 EFX_LOG(efx, "Booted from internal ASIC settings;" 1363 " setting SPI config\n"); 1364 EFX_POPULATE_OWORD_3(ee_vpd_cfg, FRF_AB_EE_VPD_EN, 0, 1365 /* 125 MHz / 7 ~= 20 MHz */ 1366 FRF_AB_EE_SF_CLOCK_DIV, 7, 1367 /* 125 MHz / 63 ~= 2 MHz */ 1368 FRF_AB_EE_EE_CLOCK_DIV, 63); 1369 efx_writeo(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0); 1370 } 1371 1372 if (boot_dev == FFE_AB_SPI_DEVICE_FLASH) 1373 falcon_spi_device_init(efx, &efx->spi_flash, 1374 FFE_AB_SPI_DEVICE_FLASH, 1375 default_flash_type); 1376 if (boot_dev == FFE_AB_SPI_DEVICE_EEPROM) 1377 falcon_spi_device_init(efx, &efx->spi_eeprom, 1378 FFE_AB_SPI_DEVICE_EEPROM, 1379 large_eeprom_type); 1380} 1381 1382static int falcon_probe_nic(struct efx_nic *efx) 1383{ 1384 struct falcon_nic_data *nic_data; 1385 struct falcon_board *board; 1386 int rc; 1387 1388 /* Allocate storage for hardware specific data */ 1389 nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL); 1390 if (!nic_data) 1391 return -ENOMEM; 1392 efx->nic_data = nic_data; 1393 1394 rc = -ENODEV; 1395 1396 if (efx_nic_fpga_ver(efx) != 0) { 1397 EFX_ERR(efx, "Falcon FPGA not supported\n"); 1398 goto fail1; 1399 } 1400 1401 if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) { 1402 efx_oword_t nic_stat; 1403 struct pci_dev *dev; 1404 u8 pci_rev = efx->pci_dev->revision; 1405 1406 if ((pci_rev == 0xff) || (pci_rev == 0)) { 1407 EFX_ERR(efx, "Falcon rev A0 not supported\n"); 1408 goto fail1; 1409 } 1410 efx_reado(efx, &nic_stat, FR_AB_NIC_STAT); 1411 if (EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_10G) == 0) { 1412 EFX_ERR(efx, "Falcon rev A1 1G not supported\n"); 1413 goto fail1; 1414 } 1415 if (EFX_OWORD_FIELD(nic_stat, FRF_AA_STRAP_PCIE) == 0) { 1416 EFX_ERR(efx, "Falcon rev A1 PCI-X not supported\n"); 1417 goto fail1; 1418 } 1419 1420 dev = pci_dev_get(efx->pci_dev); 1421 while ((dev = pci_get_device(EFX_VENDID_SFC, FALCON_A_S_DEVID, 1422 dev))) { 1423 if (dev->bus == efx->pci_dev->bus && 1424 dev->devfn == efx->pci_dev->devfn + 1) { 1425 nic_data->pci_dev2 = dev; 1426 break; 1427 } 1428 } 1429 if (!nic_data->pci_dev2) { 1430 EFX_ERR(efx, "failed to find secondary function\n"); 1431 rc = -ENODEV; 1432 goto fail2; 1433 } 1434 } 1435 1436 /* Now we can reset the NIC */ 1437 rc = falcon_reset_hw(efx, RESET_TYPE_ALL); 1438 if (rc) { 1439 EFX_ERR(efx, "failed to reset NIC\n"); 1440 goto fail3; 1441 } 1442 1443 /* Allocate memory for INT_KER */ 1444 rc = efx_nic_alloc_buffer(efx, &efx->irq_status, sizeof(efx_oword_t)); 1445 if (rc) 1446 goto fail4; 1447 BUG_ON(efx->irq_status.dma_addr & 0x0f); 1448 1449 EFX_LOG(efx, "INT_KER at %llx (virt %p phys %llx)\n", 1450 (u64)efx->irq_status.dma_addr, 1451 efx->irq_status.addr, (u64)virt_to_phys(efx->irq_status.addr)); 1452 1453 falcon_probe_spi_devices(efx); 1454 1455 /* Read in the non-volatile configuration */ 1456 rc = falcon_probe_nvconfig(efx); 1457 if (rc) 1458 goto fail5; 1459 1460 /* Initialise I2C adapter */ 1461 board = falcon_board(efx); 1462 board->i2c_adap.owner = THIS_MODULE; 1463 board->i2c_data = falcon_i2c_bit_operations; 1464 board->i2c_data.data = efx; 1465 board->i2c_adap.algo_data = &board->i2c_data; 1466 board->i2c_adap.dev.parent = &efx->pci_dev->dev; 1467 strlcpy(board->i2c_adap.name, "SFC4000 GPIO", 1468 sizeof(board->i2c_adap.name)); 1469 rc = i2c_bit_add_bus(&board->i2c_adap); 1470 if (rc) 1471 goto fail5; 1472 1473 rc = falcon_board(efx)->type->init(efx); 1474 if (rc) { 1475 EFX_ERR(efx, "failed to initialise board\n"); 1476 goto fail6; 1477 } 1478 1479 nic_data->stats_disable_count = 1; 1480 setup_timer(&nic_data->stats_timer, &falcon_stats_timer_func, 1481 (unsigned long)efx); 1482 1483 return 0; 1484 1485 fail6: 1486 BUG_ON(i2c_del_adapter(&board->i2c_adap)); 1487 memset(&board->i2c_adap, 0, sizeof(board->i2c_adap)); 1488 fail5: 1489 falcon_remove_spi_devices(efx); 1490 efx_nic_free_buffer(efx, &efx->irq_status); 1491 fail4: 1492 fail3: 1493 if (nic_data->pci_dev2) { 1494 pci_dev_put(nic_data->pci_dev2); 1495 nic_data->pci_dev2 = NULL; 1496 } 1497 fail2: 1498 fail1: 1499 kfree(efx->nic_data); 1500 return rc; 1501} 1502 1503static void falcon_init_rx_cfg(struct efx_nic *efx) 1504{ 1505 /* Prior to Siena the RX DMA engine will split each frame at 1506 * intervals of RX_USR_BUF_SIZE (32-byte units). We set it to 1507 * be so large that that never happens. */ 1508 const unsigned huge_buf_size = (3 * 4096) >> 5; 1509 /* RX control FIFO thresholds (32 entries) */ 1510 const unsigned ctrl_xon_thr = 20; 1511 const unsigned ctrl_xoff_thr = 25; 1512 /* RX data FIFO thresholds (256-byte units; size varies) */ 1513 int data_xon_thr = efx_nic_rx_xon_thresh >> 8; 1514 int data_xoff_thr = efx_nic_rx_xoff_thresh >> 8; 1515 efx_oword_t reg; 1516 1517 efx_reado(efx, &reg, FR_AZ_RX_CFG); 1518 if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) { 1519 /* Data FIFO size is 5.5K */ 1520 if (data_xon_thr < 0) 1521 data_xon_thr = 512 >> 8; 1522 if (data_xoff_thr < 0) 1523 data_xoff_thr = 2048 >> 8; 1524 EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_DESC_PUSH_EN, 0); 1525 EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_USR_BUF_SIZE, 1526 huge_buf_size); 1527 EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_MAC_TH, data_xon_thr); 1528 EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_MAC_TH, data_xoff_thr); 1529 EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_TX_TH, ctrl_xon_thr); 1530 EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_TX_TH, ctrl_xoff_thr); 1531 } else { 1532 /* Data FIFO size is 80K; register fields moved */ 1533 if (data_xon_thr < 0) 1534 data_xon_thr = 27648 >> 8; /* ~3*max MTU */ 1535 if (data_xoff_thr < 0) 1536 data_xoff_thr = 54272 >> 8; /* ~80Kb - 3*max MTU */ 1537 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_DESC_PUSH_EN, 0); 1538 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_USR_BUF_SIZE, 1539 huge_buf_size); 1540 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_MAC_TH, data_xon_thr); 1541 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_MAC_TH, data_xoff_thr); 1542 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_TX_TH, ctrl_xon_thr); 1543 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_TX_TH, ctrl_xoff_thr); 1544 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1); 1545 } 1546 /* Always enable XOFF signal from RX FIFO. We enable 1547 * or disable transmission of pause frames at the MAC. */ 1548 EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, 1); 1549 efx_writeo(efx, &reg, FR_AZ_RX_CFG); 1550} 1551 1552/* This call performs hardware-specific global initialisation, such as 1553 * defining the descriptor cache sizes and number of RSS channels. 1554 * It does not set up any buffers, descriptor rings or event queues. 1555 */ 1556static int falcon_init_nic(struct efx_nic *efx) 1557{ 1558 efx_oword_t temp; 1559 int rc; 1560 1561 /* Use on-chip SRAM */ 1562 efx_reado(efx, &temp, FR_AB_NIC_STAT); 1563 EFX_SET_OWORD_FIELD(temp, FRF_AB_ONCHIP_SRAM, 1); 1564 efx_writeo(efx, &temp, FR_AB_NIC_STAT); 1565 1566 /* Set the source of the GMAC clock */ 1567 if (efx_nic_rev(efx) == EFX_REV_FALCON_B0) { 1568 efx_reado(efx, &temp, FR_AB_GPIO_CTL); 1569 EFX_SET_OWORD_FIELD(temp, FRF_AB_USE_NIC_CLK, true); 1570 efx_writeo(efx, &temp, FR_AB_GPIO_CTL); 1571 } 1572 1573 /* Select the correct MAC */ 1574 falcon_clock_mac(efx); 1575 1576 rc = falcon_reset_sram(efx); 1577 if (rc) 1578 return rc; 1579 1580 /* Clear the parity enables on the TX data fifos as 1581 * they produce false parity errors because of timing issues 1582 */ 1583 if (EFX_WORKAROUND_5129(efx)) { 1584 efx_reado(efx, &temp, FR_AZ_CSR_SPARE); 1585 EFX_SET_OWORD_FIELD(temp, FRF_AB_MEM_PERR_EN_TX_DATA, 0); 1586 efx_writeo(efx, &temp, FR_AZ_CSR_SPARE); 1587 } 1588 1589 if (EFX_WORKAROUND_7244(efx)) { 1590 efx_reado(efx, &temp, FR_BZ_RX_FILTER_CTL); 1591 EFX_SET_OWORD_FIELD(temp, FRF_BZ_UDP_FULL_SRCH_LIMIT, 8); 1592 EFX_SET_OWORD_FIELD(temp, FRF_BZ_UDP_WILD_SRCH_LIMIT, 8); 1593 EFX_SET_OWORD_FIELD(temp, FRF_BZ_TCP_FULL_SRCH_LIMIT, 8); 1594 EFX_SET_OWORD_FIELD(temp, FRF_BZ_TCP_WILD_SRCH_LIMIT, 8); 1595 efx_writeo(efx, &temp, FR_BZ_RX_FILTER_CTL); 1596 } 1597 1598 /* XXX This is documented only for Falcon A0/A1 */ 1599 /* Setup RX. Wait for descriptor is broken and must 1600 * be disabled. RXDP recovery shouldn't be needed, but is. 1601 */ 1602 efx_reado(efx, &temp, FR_AA_RX_SELF_RST); 1603 EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_NODESC_WAIT_DIS, 1); 1604 EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_SELF_RST_EN, 1); 1605 if (EFX_WORKAROUND_5583(efx)) 1606 EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_ISCSI_DIS, 1); 1607 efx_writeo(efx, &temp, FR_AA_RX_SELF_RST); 1608 1609 /* Do not enable TX_NO_EOP_DISC_EN, since it limits packets to 16 1610 * descriptors (which is bad). 1611 */ 1612 efx_reado(efx, &temp, FR_AZ_TX_CFG); 1613 EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_NO_EOP_DISC_EN, 0); 1614 efx_writeo(efx, &temp, FR_AZ_TX_CFG); 1615 1616 falcon_init_rx_cfg(efx); 1617 1618 /* Set destination of both TX and RX Flush events */ 1619 if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) { 1620 EFX_POPULATE_OWORD_1(temp, FRF_BZ_FLS_EVQ_ID, 0); 1621 efx_writeo(efx, &temp, FR_BZ_DP_CTRL); 1622 } 1623 1624 efx_nic_init_common(efx); 1625 1626 return 0; 1627} 1628 1629static void falcon_remove_nic(struct efx_nic *efx) 1630{ 1631 struct falcon_nic_data *nic_data = efx->nic_data; 1632 struct falcon_board *board = falcon_board(efx); 1633 int rc; 1634 1635 board->type->fini(efx); 1636 1637 /* Remove I2C adapter and clear it in preparation for a retry */ 1638 rc = i2c_del_adapter(&board->i2c_adap); 1639 BUG_ON(rc); 1640 memset(&board->i2c_adap, 0, sizeof(board->i2c_adap)); 1641 1642 falcon_remove_spi_devices(efx); 1643 efx_nic_free_buffer(efx, &efx->irq_status); 1644 1645 falcon_reset_hw(efx, RESET_TYPE_ALL); 1646 1647 /* Release the second function after the reset */ 1648 if (nic_data->pci_dev2) { 1649 pci_dev_put(nic_data->pci_dev2); 1650 nic_data->pci_dev2 = NULL; 1651 } 1652 1653 /* Tear down the private nic state */ 1654 kfree(efx->nic_data); 1655 efx->nic_data = NULL; 1656} 1657 1658static void falcon_update_nic_stats(struct efx_nic *efx) 1659{ 1660 struct falcon_nic_data *nic_data = efx->nic_data; 1661 efx_oword_t cnt; 1662 1663 if (nic_data->stats_disable_count) 1664 return; 1665 1666 efx_reado(efx, &cnt, FR_AZ_RX_NODESC_DROP); 1667 efx->n_rx_nodesc_drop_cnt += 1668 EFX_OWORD_FIELD(cnt, FRF_AB_RX_NODESC_DROP_CNT); 1669 1670 if (nic_data->stats_pending && 1671 *nic_data->stats_dma_done == FALCON_STATS_DONE) { 1672 nic_data->stats_pending = false; 1673 rmb(); /* read the done flag before the stats */ 1674 efx->mac_op->update_stats(efx); 1675 } 1676} 1677 1678void falcon_start_nic_stats(struct efx_nic *efx) 1679{ 1680 struct falcon_nic_data *nic_data = efx->nic_data; 1681 1682 spin_lock_bh(&efx->stats_lock); 1683 if (--nic_data->stats_disable_count == 0) 1684 falcon_stats_request(efx); 1685 spin_unlock_bh(&efx->stats_lock); 1686} 1687 1688void falcon_stop_nic_stats(struct efx_nic *efx) 1689{ 1690 struct falcon_nic_data *nic_data = efx->nic_data; 1691 int i; 1692 1693 might_sleep(); 1694 1695 spin_lock_bh(&efx->stats_lock); 1696 ++nic_data->stats_disable_count; 1697 spin_unlock_bh(&efx->stats_lock); 1698 1699 del_timer_sync(&nic_data->stats_timer); 1700 1701 /* Wait enough time for the most recent transfer to 1702 * complete. */ 1703 for (i = 0; i < 4 && nic_data->stats_pending; i++) { 1704 if (*nic_data->stats_dma_done == FALCON_STATS_DONE) 1705 break; 1706 msleep(1); 1707 } 1708 1709 spin_lock_bh(&efx->stats_lock); 1710 falcon_stats_complete(efx); 1711 spin_unlock_bh(&efx->stats_lock); 1712} 1713 1714static void falcon_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) 1715{ 1716 falcon_board(efx)->type->set_id_led(efx, mode); 1717} 1718 1719/************************************************************************** 1720 * 1721 * Wake on LAN 1722 * 1723 ************************************************************************** 1724 */ 1725 1726static void falcon_get_wol(struct efx_nic *efx, struct ethtool_wolinfo *wol) 1727{ 1728 wol->supported = 0; 1729 wol->wolopts = 0; 1730 memset(&wol->sopass, 0, sizeof(wol->sopass)); 1731} 1732 1733static int falcon_set_wol(struct efx_nic *efx, u32 type) 1734{ 1735 if (type != 0) 1736 return -EINVAL; 1737 return 0; 1738} 1739 1740/************************************************************************** 1741 * 1742 * Revision-dependent attributes used by efx.c and nic.c 1743 * 1744 ************************************************************************** 1745 */ 1746 1747struct efx_nic_type falcon_a1_nic_type = { 1748 .probe = falcon_probe_nic, 1749 .remove = falcon_remove_nic, 1750 .init = falcon_init_nic, 1751 .fini = efx_port_dummy_op_void, 1752 .monitor = falcon_monitor, 1753 .reset = falcon_reset_hw, 1754 .probe_port = falcon_probe_port, 1755 .remove_port = falcon_remove_port, 1756 .prepare_flush = falcon_prepare_flush, 1757 .update_stats = falcon_update_nic_stats, 1758 .start_stats = falcon_start_nic_stats, 1759 .stop_stats = falcon_stop_nic_stats, 1760 .set_id_led = falcon_set_id_led, 1761 .push_irq_moderation = falcon_push_irq_moderation, 1762 .push_multicast_hash = falcon_push_multicast_hash, 1763 .reconfigure_port = falcon_reconfigure_port, 1764 .get_wol = falcon_get_wol, 1765 .set_wol = falcon_set_wol, 1766 .resume_wol = efx_port_dummy_op_void, 1767 .test_nvram = falcon_test_nvram, 1768 .default_mac_ops = &falcon_xmac_operations, 1769 1770 .revision = EFX_REV_FALCON_A1, 1771 .mem_map_size = 0x20000, 1772 .txd_ptr_tbl_base = FR_AA_TX_DESC_PTR_TBL_KER, 1773 .rxd_ptr_tbl_base = FR_AA_RX_DESC_PTR_TBL_KER, 1774 .buf_tbl_base = FR_AA_BUF_FULL_TBL_KER, 1775 .evq_ptr_tbl_base = FR_AA_EVQ_PTR_TBL_KER, 1776 .evq_rptr_tbl_base = FR_AA_EVQ_RPTR_KER, 1777 .max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH), 1778 .rx_buffer_padding = 0x24, 1779 .max_interrupt_mode = EFX_INT_MODE_MSI, 1780 .phys_addr_channels = 4, 1781 .tx_dc_base = 0x130000, 1782 .rx_dc_base = 0x100000, 1783 .offload_features = NETIF_F_IP_CSUM, 1784 .reset_world_flags = ETH_RESET_IRQ, 1785}; 1786 1787struct efx_nic_type falcon_b0_nic_type = { 1788 .probe = falcon_probe_nic, 1789 .remove = falcon_remove_nic, 1790 .init = falcon_init_nic, 1791 .fini = efx_port_dummy_op_void, 1792 .monitor = falcon_monitor, 1793 .reset = falcon_reset_hw, 1794 .probe_port = falcon_probe_port, 1795 .remove_port = falcon_remove_port, 1796 .prepare_flush = falcon_prepare_flush, 1797 .update_stats = falcon_update_nic_stats, 1798 .start_stats = falcon_start_nic_stats, 1799 .stop_stats = falcon_stop_nic_stats, 1800 .set_id_led = falcon_set_id_led, 1801 .push_irq_moderation = falcon_push_irq_moderation, 1802 .push_multicast_hash = falcon_push_multicast_hash, 1803 .reconfigure_port = falcon_reconfigure_port, 1804 .get_wol = falcon_get_wol, 1805 .set_wol = falcon_set_wol, 1806 .resume_wol = efx_port_dummy_op_void, 1807 .test_registers = falcon_b0_test_registers, 1808 .test_nvram = falcon_test_nvram, 1809 .default_mac_ops = &falcon_xmac_operations, 1810 1811 .revision = EFX_REV_FALCON_B0, 1812 /* Map everything up to and including the RSS indirection 1813 * table. Don't map MSI-X table, MSI-X PBA since Linux 1814 * requires that they not be mapped. */ 1815 .mem_map_size = (FR_BZ_RX_INDIRECTION_TBL + 1816 FR_BZ_RX_INDIRECTION_TBL_STEP * 1817 FR_BZ_RX_INDIRECTION_TBL_ROWS), 1818 .txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL, 1819 .rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL, 1820 .buf_tbl_base = FR_BZ_BUF_FULL_TBL, 1821 .evq_ptr_tbl_base = FR_BZ_EVQ_PTR_TBL, 1822 .evq_rptr_tbl_base = FR_BZ_EVQ_RPTR, 1823 .max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH), 1824 .rx_buffer_padding = 0, 1825 .max_interrupt_mode = EFX_INT_MODE_MSIX, 1826 .phys_addr_channels = 32, /* Hardware limit is 64, but the legacy 1827 * interrupt handler only supports 32 1828 * channels */ 1829 .tx_dc_base = 0x130000, 1830 .rx_dc_base = 0x100000, 1831 .offload_features = NETIF_F_IP_CSUM, 1832 .reset_world_flags = ETH_RESET_IRQ, 1833}; 1834