Open dormatry door like a Tesla car
README.md

Tesla Door #

An ESP32 door unlocker and a Native Shell (nsh) phone app. The workspace keeps the three parts at equal depth:

Crate Purpose
crates/esp32 BLE door firmware and LED indicators
crates/phone Rust nsh app, native platform packaging, and macOS CLI
crates/protocol Shared versioned wire protocol

See the protocol and phone setup.

nix develop
cd crates/esp32
cargo build --release
espflash flash --chip esp32s3 ../../target/xtensa-esp32s3-none-elf/release/tesla-door

The ESP-IDF partition table used by espflash reserves nvs at 0x9000..0xf000, before the factory app at 0x10000. The door stores its state in the first two nvs sectors (0x9000..0xb000). A normal espflash flash updates the bootloader, partition table, and app image while preserving that data partition. Keep the same partition layout when updating firmware. A full flash erase or an explicit erase of nvs resets pairing and revocation; the nvs partition should be empty when provisioning a new door.

nix develop
cargo build --release -p tesla-door-phone
sh scripts/run-phone-macos.sh

The firmware stores pairing and revocation state in the ESP-IDF nvs flash partition. An open is represented by an LED flash; the vibration sensor and servo are not connected.