Something went wrong. Try again.
[READ-ONLY] Mirror of https://github.com/VibeDevelopers/Comet.
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599/* doc/reference.conf - comet example configuration file * * Copyright (C) 2000-2002 Hybrid Development Team * Copyright (C) 2002-2005 ircd-ratbox development team * Copyright (C) 2005-2006 charybdis development team * * Written by ejb, wcampbel, db, leeh and others * */
/* IMPORTANT NOTES: * * class {} blocks MUST be specified before anything that uses them. That * means they must be defined before auth {} and before connect {}. * * auth {} blocks MUST be specified in order of precedence. The first one * that matches a user will be used. So place spoofs first, then specials, * then general access, then restricted. * * privset {} blocks MUST be specified before anything that uses them. That * means they must be defined before operator {}. * * Both shell style (#) and C style comments are supported. * * Files may be included by either: * .include "filename" * .include <filename> * * Flags variables are comma-separated sets of predefined values, * specific to each block. For example in operator {} blocks: * flags = encrypted, encrypted; * * Times/durations are written as: * 12 hours 30 minutes 1 second * * Valid units of time: * month, week, day, hour, minute, second * * Valid units of size: * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte * * Sizes and times may be singular or plural. */
/* Extensions: * * Charybdis contains several extensions that are not enabled by default. * To use them, uncomment the lines below. * * comet.chat/oper client CAP and tag -- cap_oper * comet.chat/realhost client CAP and tag -- cap_realhost * Channel mode +-A (admin only) -- chm_adminonly * Channel mode +-U (allow non-SSL users to join) -- chm_insecure * Channel mode +-T (blocks notices) -- chm_nonotice * Channel mode +-X (Allows bots only) -- chm_botonly * Channel mode +-B (blocks usermode +B bots) -- chm_nobot * Channel mode +-O (oper only) -- chm_operonly * Channel mode +-M (disallow KICK on IRC ops) -- chm_operpeace * Channel mode +-R (only regged users can speak) -- chm_regmsg * Channel mode +-S (ssl only) -- chm_sslonly * Restrict channel creation to logged in users -- createauthonly * Restrict channel creation to opers -- createoperonly * Prevent new non-exempt users from connecting -- drain * Account bans (+b $a[:mask]) -- extb_account * Banned from another channel (+b $j:mask) -- extb_canjoin * Other-channel bans (+b $c:mask) -- extb_channel * Combination extbans -- extb_combi * Extended ban (+b $x:mask) -- extb_extgecos * Unidentified hostmask ban (+b $g:mask) -- extb_guest * Hostmask bans (for combination extbans) -- extb_hostmask * Oper bans (+b $o) -- extb_oper * Realname (gecos) bans (+b $r:mask) -- extb_realname * Server bans (+b $s:mask) -- extb_server * SSL bans (+b $z) -- extb_ssl * User mode bans (+b $u:modes) -- extb_usermode * Spamfilter system -- filter * Forces users to always be umode +i (invisible) -- force_user_invis * Helpops system (umode +h) -- helpops * Hide non-shared channels from /whois -- hide_uncommon_channels * HURT system -- hurt * comet.chat/identify-msg client CAP and tag -- identify_msg * Allow invex (+I) to bypass regonly (+r) -- invex_regonly * Notify channels on /invite, invite-notify CAP -- invite_notify * New host mangling (umode +x) -- ip_cloaking_4.0 * Old host mangling (umode +h) -- ip_cloaking * /adminwall to message all admins -- m_adminwall * Dynamically extend channel limits -- m_extendchans * Find channel forwards -- m_findforwards * /identify support -- m_identify * /ojoin support (alternative to override) -- m_ojoin * /okick support (alternative to override) -- m_okick * /omode support (alternative to override) -- m_omode * /opme support (alternative to override) -- m_opme * QUARANTINE (restrict unidentified connections) -- m_quarantine * /remove support -- m_remove * Send permanent XLINEs and RESVs to remote server -- m_sendbans * Shed users from the server -- m_shedding * WebIRC support -- m_webirc * Prevent opers from killing services -- no_kill_services * Opers cannot be invisible (umode +i) -- no_oper_invis * Oper override -- override * Opers using override cannot be /kicked -- override_kick_immunity * Prevent unauthed chanops from doing anything -- restrict-unauthenticated * Channel creation notice (snomask +l) -- sno_channelcreate * Far connection notices (snomask +F) -- sno_farconnect * Global nick-change notices -- sno_globalnickchange * Remote oper up notices -- sno_globaloper * +channel-context client tag support -- tag_channel_context * message-id support -- tag_message_id * +reply client tag support -- tag_reply * +typing client tag support -- tag_typing * Allows you to hide your idle time (umode +I) -- umode_hide_idle_time * Allows you to block incoming CTCP (umode +C) -- umode_noctcp */#loadmodule "extensions/cap_oper";#loadmodule "extensions/cap_realhost";#loadmodule "extensions/chm_adminonly";#loadmodule "extensions/chm_insecure";#loadmodule "extensions/chm_nonotice";#loadmodule "extensions/chm_botonly";#loadmodule "extensions/chm_nobot";#loadmodule "extensions/chm_operonly";#loadmodule "extensions/chm_operpeace";#loadmodule "extensions/chm_regmsg";#loadmodule "extensions/chm_sslonly";#loadmodule "extensions/createauthonly";#loadmodule "extensions/createoperonly";#loadmodule "extensions/drain";#loadmodule "extensions/extb_account";#loadmodule "extensions/extb_canjoin";#loadmodule "extensions/extb_channel";#loadmodule "extensions/extb_combi";#loadmodule "extensions/extb_extgecos";#loadmodule "extensions/extb_guest";#loadmodule "extensions/extb_hostmask";#loadmodule "extensions/extb_oper";#loadmodule "extensions/extb_realname";#loadmodule "extensions/extb_server";#loadmodule "extensions/extb_ssl";#loadmodule "extensions/extb_usermode";#loadmodule "extensions/filter";#loadmodule "extensions/force_user_invis";#loadmodule "extensions/helpops";#loadmodule "extensions/hide_uncommon_channels";#loadmodule "extensions/hurt";#loadmodule "extensions/identify_msg";#loadmodule "extensions/invex_regonly";#loadmodule "extensions/invite_notify";#loadmodule "extensions/ip_cloaking_4.0";#loadmodule "extensions/ip_cloaking";#loadmodule "extensions/m_adminwall";#loadmodule "extensions/m_extendchans";#loadmodule "extensions/m_findforwards";#loadmodule "extensions/m_identify";#loadmodule "extensions/m_ojoin";#loadmodule "extensions/m_okick";#loadmodule "extensions/m_omode";#loadmodule "extensions/m_opme";#loadmodule "extensions/m_quarantine";#loadmodule "extensions/m_remove";#loadmodule "extensions/m_sendbans";#loadmodule "extensions/m_shedding";#loadmodule "extensions/m_webirc";#loadmodule "extensions/no_kill_services";#loadmodule "extensions/no_oper_invis";#loadmodule "extensions/override";#loadmodule "extensions/override_kick_immunity";#loadmodule "extensions/restrict-unauthenticated";#loadmodule "extensions/sno_channelcreate";#loadmodule "extensions/sno_farconnect";#loadmodule "extensions/sno_globaloper";#loadmodule "extensions/sno_globalnickchange";#loadmodule "extensions/tag_channel_context";#loadmodule "extensions/tag_message_id";#loadmodule "extensions/tag_reply";#loadmodule "extensions/tag_typing";#loadmodule "extensions/umode_hide_idle_time";#loadmodule "extensions/umode_noctcp";
/* serverinfo {}: Contains information about the server. (OLD M:) */serverinfo { /* name: the name of our server */ name = "hades.arpa";
/* sid: the unique server id of our server. This must be three * characters long. The first character must be a digit [0-9], the * remaining two chars may be letters [A-Z] or digits [0-9]. * * This parameter must be specified for the server to start. */ sid = "42X";
/* description: the description of our server. '[' and ']' may not * be used here for compatibility with older servers. */ description = "charybdis test server";
/* network info: the name and description of the network this server * is on. Shown in the 005 reply and used with serverhiding. */ network_name = "MyNet";
/* vhost: the IP to bind to when we connect outward to ipv4 servers. * This should be an ipv4 IP only. */ #vhost = "192.0.2.6";
/* vhost6: the IP to bind to when we connect outward to ipv6 servers. * This should be an ipv6 IP only. */ #vhost6 = "2001:db8:2::6";
/* ssl_cert: certificate (and optionally key) for our ssl server */ ssl_cert = "etc/ssl.pem";
/* ssl_private_key: our ssl private key (if not contained in ssl_cert file) */ #ssl_private_key = "etc/ssl.key";
/* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 2048 */ /* If you do not provide parameters, some TLS backends will fail on DHE- ciphers, and some will succeed but use weak, common DH groups! */ ssl_dh_params = "etc/dh.pem";
/* ssl_cipher_list: A list of ciphers, dependent on your TLS backend */ #ssl_cipher_list = "TLS_CHACHA20_POLY1305_SHA256:EECDH+HIGH:EDH+HIGH:HIGH:!aNULL";
/* ssld_count: number of ssld processes you want to start, if you * have a really busy server, using N-1 where N is the number of * cpu/cpu cores you have might be useful. A number greater than one * can also be useful in case of bugs in ssld and because ssld needs * two file descriptors per SSL connection. */ ssld_count = 1;
/* default max clients: the default maximum number of clients * allowed to connect. This can be changed once ircd has started by * issuing: * /quote set maxclients <limit> */ default_max_clients = 1024;
/* nicklen: enforced nickname length (for this server only; must not * be longer than the maximum length set while building). */ nicklen = 30;};
/* admin {}: contains admin information about the server. (OLD A:) */admin { name = "Smurf target"; description = "Main Server Administrator"; email = "<syn@packets.r.us>";};
/* log {}: contains information about logfiles. */log { /* logfiles: the logfiles to use for specific activity. if these * paths are defined, then ircd will log to them, otherwise it wont. * * The confs are, in order: * - userlog: user exits * - fuserlog: failed user connections * - operlog: /oper usage * - foperlog: failed /oper usage * - serverlog: server connects/disconnects * - klinelog: klines, etc * - killlog: kills * - operspylog: operspy usage * - ioerrorlog: IO errors */ fname_userlog = "logs/userlog"; #fname_fuserlog = "logs/fuserlog"; fname_operlog = "logs/operlog"; #fname_foperlog = "logs/foperlog"; fname_serverlog = "logs/serverlog"; #fname_klinelog = "logs/klinelog"; fname_killlog = "logs/killlog"; fname_operspylog = "logs/operspylog"; #fname_ioerrorlog = "logs/ioerror";};
/* class {}: contain information about classes for users (OLD Y:) */class "users" { /* class name must go above */
/* ping time: how often a client must reply to a PING from the * server before they are dropped. */ ping_time = 2 minutes;
/* number per ident: the number of users per user@host networkwide * allowed to connect. Unidented connections are classified as * the same ident. */ number_per_ident = 2;
/* number per ip: the number of local users per host allowed */ number_per_ip = 3;
/* number per ip global: the number of network wide connections * per host allowed for a user, including connections to the * local server. */ number_per_ip_global = 5;
/* cidr_ipv4_bitlen: Limits numbers of connections from a subnet size */ cidr_ipv4_bitlen = 24;
/* cidr_ipv6_bitlen: Limits numbers of connections from a subnet size * the following example makes the subnet /64 this is useful * for IPv6 connections in particular */ cidr_ipv6_bitlen = 64;
/* number_per_cidr: Number of connections to allow from a subnet of the * size given in cidr_ipv4_bitlen/cidr_ipv6_bitlen. * 4 seems to be a good default to me. */ number_per_cidr = 4;
/* max number: the maximum number of users allowed in this class */ max_number = 100;
/* sendq: the amount of data allowed in a clients queue before * they are dropped. */ sendq = 100 kbytes;};
class "restricted" { ping_time = 1 minute 30 seconds; number_per_ip = 1; max_number = 100; sendq = 60kb;};
class "opers" { ping_time = 5 minutes; number_per_ip = 10; max_number = 100; sendq = 100kbytes;};
class "server" { ping_time = 5 minutes;
/* connectfreq: only used in server classes. specifies the delay * between autoconnecting to servers. */ connectfreq = 5 minutes;
/* max_autoconn: the amount of servers to autoconnect to. if the number * of servers in the class is or exceeds this, no more servers in the * class are autoconnected. oper initiated connects are unaffected. * this should usually be set to either 0 or 1. (autoconnecting from * hubs to leaves may cause leaves to function as hubs by having * multiple servers connected to them.) */ max_autoconn = 1;
/* max_number: the maximum number of servers allowed in this class */ max_number = 100;
/* sendq: servers need a higher sendq as they are sent more data */ sendq = 2 megabytes;};
/* listen {}: contain information about the ports ircd listens on (OLD P:) */listen { /* defer_accept: wait for clients to send IRC handshake data before * accepting them. if you intend to use software which depends on the * server replying first, such as BOPM, you should disable this feature. * otherwise, you probably want to leave it on. */ defer_accept = yes;
/* port: the specific port to listen on. if no host is specified * before, it will listen on all available IPs. * * sslport: the specific port to listen ssl connections on. if no * host is specified before, it will listen on all available IPs. * * ports are seperated via a comma, a range may be specified using ".." */
/* port: listen on all available IPs, ports 5000 and 6665 to 6669 */ port = 5000, 6665 .. 6669;
/* sslport: listen for ssl connections on all available IPs, port 6697 */ sslport = 6697;
/* host: set a specific IP/host the ports after the line will listen * on. This may be ipv4 or ipv6. */ host = "192.0.2.6"; port = 7000, 7001; sslport = 9000, 9001;
host = "2001:db8:2::6"; port = 7002; sslport = 9002;};
/* auth {}: allow users to connect to the ircd (OLD I:) */auth { /* description: descriptive text to help recognize this auth block in * stats i output. */ description = "example oper";
/* user: the user@host allowed to connect. Multiple IPv4/IPv6 user * lines are permitted per auth block. This is matched against the * hostname and IP address (using :: shortening for IPv6 and * prepending a 0 if it starts with a colon) and can also use CIDR * masks. */ user = "*@198.51.100.0/24"; user = "*test@2001:db8:1:*";
/* umodes; the user mode character string to apply to users * when they get placed into this auth block. */ #umodes = "+w";
/* auth_user: This allows specifying a username:password instead of * just a password in PASS, so that a fixed user@host is not * necessary for a specific auth{} block. */ #auth_user = "SomeUser";
/* password: an optional password that is required to use this block. * By default this is not encrypted, specify the flag "encrypted" in * flags = ...; below if it is. */ password = "letmein";
/* spoof: fake the users user@host to be be this. You may either * specify a host or a user@host to spoof to. This is free-form, * just do everyone a favour and dont abuse it. (OLD I: = flag) */ spoof = "I.still.hate.packets";
/* Possible flags in auth: * * encrypted | password is encrypted with mkpasswd * spoof_notice | give a notice when spoofing hosts * exceed_limit (old > flag) | allow user to exceed class user limits * kline_exempt (old ^ flag) | exempt this user from k/g/xlines, * | dnsbls, and proxies * dnsbl_exempt | exempt this user from dnsbls * proxy_exempt | exempt this user from proxies * spambot_exempt | exempt this user from spambot checks * shide_exempt | exempt this user from serverhiding * jupe_exempt | exempt this user from generating * warnings joining juped channels * resv_exempt | exempt this user from resvs * flood_exempt | exempt this user from flood limits * USE WITH CAUTION. * no_tilde (old - flag) | don't prefix ~ to username if no ident * need_ident (old + flag) | require ident for user in this class * need_ssl | require SSL/TLS for user in this class * need_sasl | require SASL id for user in this class * extend_chans | allow this user to join more channels than normal * kline_spoof_ip | if this block has a spoof host, klines match only * | the spoof and not the underlying IP */ flags = kline_exempt, exceed_limit;
/* class: the class the user is placed in */ class = "opers";};
auth { /* redirect: the server and port to redirect a user to. A user does * not have to obey the redirection, the ircd just suggests to them * an alternative server. */ redirserv = "irc.example.net"; redirport = 6667;
user = "*.example.com";
/* class: a class is required even though it is not used */ class = "users";};
auth { user = "*@*"; class = "users";};
/* privset{}: defines operator privilege sets. */privset "local_op" { /* privs: controls the activities and commands an oper is * allowed to do on the server * * Available options: * * oper:general: enable most general oper privileges that came * with +o in older releases * auspex:oper: allows the oper to see through oper hiding * auspex:umodes: allows viewing other users' modes * auspex:cmodes: shows privileged cmodes * auspex:hostname: shows hidden hostnames/ips * oper:privs: allows /stats o/O and seeing privset in /whois * oper:testline: allows /testline and /testgecos * oper:kill: allows local and remote users to be /KILL'd * oper:routing: allows SQUIT and CONNECT * oper:kline: allows KLINE and DLINE * oper:unkline: allows UNKLINE and UNDLINE * snomask:nick_changes: allows oper to see nickchanges via snomask +n * oper:rehash: allows oper to REHASH config * oper:die: allows DIE and RESTART * oper:admin: gives admin privileges. admins * may (un)load modules and see various * additional information. * oper:hidden_admin: gives admin privileges except * will not have the admin lines in * whois. * oper:xline: allows use of /quote xline/unxline * oper:resv: allows /quote resv/unresv * oper:cmodes: allows cmode +LP * oper:operwall: allows the oper to send/receive operwalls * oper:spy: allows 'operspy' features to see through +s * channels etc. see /quote help operspy * oper:hidden: hides the oper from /stats p * oper:remoteban: allows remote kline etc * oper:mass_notice: allows sending mass notices * oper:wallops: allows sending wallops messages * oper:grant: allows using the GRANT command * usermode:servnotice: allows setting +s * oper:message: allows opers to bypass CALLERID (usermode +g) * oper:free_target: messages to the oper bypass flood controls * * Privileges provided by extensions include: * * oper:dehelper: allows the DEHELPER command (from extensions/helpops) * oper:override: enables oper override via umode +p (from extensions/override) * oper:receive_immunity: * confers the benefits of chmode +M (operpeace) (from extensions/chm_operpeace) * usermode:helpops allows setting +h (from extensions/helpops) * auspex:usertimes: * allows viewing user idle/connect times even when +I is set (from extensions/umode_hide_idle_time) * oper:shedding: allows the SHEDDING command (from extensions/m_shedding) */ privs = oper:general, oper:privs, oper:testline, oper:kill, oper:operwall, oper:message, usermode:servnotice, auspex:oper, auspex:hostname, auspex:umodes, auspex:cmodes;};
privset "server_bot" { /* extends: a privset to inherit in this privset */ extends = "local_op"; privs = oper:kline, oper:remoteban, snomask:nick_changes;};
privset "global_op" { extends = "local_op"; privs = oper:routing, oper:kline, oper:unkline, oper:xline, oper:resv, oper:cmodes, oper:mass_notice, oper:wallops, oper:remoteban;};
privset "admin" { extends = "global_op"; privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:grant;};
/* operator {}: defines ircd operators. (OLD O:) */operator "god" { /* name: the name of the oper must go above */
/* user: the user@host required for this operator. CIDR *is* * supported now. auth{} spoofs work here, other spoofs do not. * multiple user="" lines are supported. */ user = "*god@*"; user = "*@127.0.0.1";
/* password: the password required to oper. Unless ~encrypted is * contained in flags = ...; this will need to be encrypted using * mkpasswd, MD5 is supported */ password = "etcnjl8juSU1E";
/* rsa key: the public key for this oper when using Challenge. * A password should not be defined when this is used, see * doc/challenge.txt for more information. */ #rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
/* fingerprint: if specified, the oper's client certificate * fingerprint will be checked against the specified fingerprint * below. */ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
/* umodes: the specific umodes this oper gets when they oper. * If this is specified an oper will not be given oper_umodes * These are described above oper_only_umodes in general {}; */ #umodes = servnotice, operwall, wallop;
/* snomask: specific server notice mask on oper up. * If this is specified an oper will not be given oper_snomask. */ snomask = "+Zbfkrsuy";
/* flags: misc options for the operator. You may prefix an option * with ~ to disable it, e.g. ~encrypted. * * Default flags are encrypted. * * Available options: * * encrypted: the password above is encrypted [DEFAULT] * need_ssl: must be using SSL/TLS to oper up */ flags = encrypted;
/* privset: privileges set to grant */ privset = "admin";};
/* connect {}: controls servers we connect with (OLD C:, N:, H:, L:). * * This configuration is used whether connections are incoming or * outgoing. */connect "irc.uplink.com" { /* the name of the other server must go above. It should match the * other server's name in its serverinfo {} block, and does not * need to be an actual hostname. */
/* host: the host or IP to connect to. * * It is also used to validate incoming connections. If a hostname * is used, it must match the reverse dns of the server. */ host = "203.0.113.3";
/* vhost: the host or IP to bind to for this connection. If this * is not specified, the default vhost (in serverinfo {}) is used. */ #vhost = "192.0.2.131";
/* passwords: the passwords we send (OLD C:) and accept (OLD N:). * The remote server will have these passwords reversed. */ send_password = "password"; accept_password = "anotherpassword";
/* fingerprint: if flags = ssl is specified, the server's * certificate fingerprint will be checked against the fingerprint * specified below. required if using flags = ssl. */ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
/* port: the port to connect to this server on */ port = 6666;
/* class: the class this server is in */ class = "server";
/* flags: controls special options for this server * encrypted - marks the accept_password as being crypt()'d * autoconn - automatically connect to this server * topicburst - burst topics between servers * ssl - ssl/tls encrypted server connections * sctp - use SCTP instead of TCP to connect to the server * no-export - marks the link as a no-export link (not exported to other links) */ flags = topicburst;};
connect "ipv6.lame.server" { host = "192.0.2.1"; host = "2001:db8:3::8"; send_password = "password"; accept_password = "password"; port = 6666;
/* aftype: controls whether the outgoing connection uses "ipv4" or "ipv6". * Default is to try either at random. */ aftype = ipv6; class = "server";};
connect "ssl.uplink.com" { host = "203.0.113.129"; send_password = "password"; accept_password = "anotherpassword"; port = 9999; class = "server"; flags = ssl, topicburst;};
/* cluster {}; servers that we propagate things to automatically. */cluster { /* name: the server to share with, this can be a wildcard and may be * stacked. */ /* flags: list of what to share, all the name lines above this (up * until another flags entry) will receive these flags. * * kline - share perm klines * tkline - share temp klines * unkline - share unklines * xline - share perm xlines * txline - share temp xlines * unxline - share unxlines * resv - share perm resvs * tresv - share temp resvs * unresv - share unresvs * all - share all of the above */
/* share klines/unklines/xlines with *.lan */ name = "*.lan"; flags = kline, unkline, xline;};
/* service{}: privileged servers (services). These servers have extra * privileges such as setting login names on users and introducing clients * with umode +S (unkickable, hide channels, etc). * Do not place normal servers here. * There may be only one service{} block. */service { /* name: the server name. These may be stacked. */ name = "services.int";};
/* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */exempt { ip = "192.0.2.0/24";
/* these may be stacked */ ip = "127.0.0.1";};
/* secure {}: IPs that are considered to be secure networks, and get * +Z without using TLS */secure { ip = "127.0.0.1";};
/* The channel block contains options pertaining to channels */channel { /* invex: Enable/disable channel mode +I, a n!u@h list of masks * that can join a +i channel without an invite. */ use_invex = yes;
/* except: Enable/disable channel mode +e, a n!u@h list of masks * that can join a channel through a ban (+b). */ use_except = yes;
/* forward: Enable/disable channel mode +f, a channel to forward * users to if they can't join because of +i etc. Also enables ban * forwarding, <mask>$<channel>. */ use_forward = yes;
/* knock: Allows users to request an invite to a channel that * is locked somehow (+ikl). If the channel is +p or you are banned * the knock will not be sent. */ use_knock = yes;
/* knock delay: The amount of time a user must wait between issuing * the knock command. */ knock_delay = 5 minutes;
/* knock channel delay: How often a knock to any specific channel * is permitted, regardless of the user sending the knock. */ knock_delay_channel = 1 minute;
/* max chans: The maximum number of channels a user can join/be on. */ max_chans_per_user = 15;
/* max chans (large): The extended maximum number of channels a user can join. */ max_chans_per_user_large = 60;
/* max bans: maximum number of +b/e/I/q modes in a channel */ max_bans = 100;
/* max bans: maximum number of +b/e/I/q modes in a +L channel */ max_bans_large = 500;
/* splitcode: split users, split servers and either no join on split * or no create on split must be enabled for split checking. * splitmode will be entered on either split users or split servers * dropping below the limit. * * you may force splitmode to be permanent by /quote set splitmode on */
/* split users: when the usercount is lower than this level, consider * ourselves split. this must be set for automatic splitmode */ default_split_user_count = 0;
/* split servers: when the amount of servers that have acknowledged * theyve finished bursting is lower than this, consider ourselves * split. this must be set for automatic splitmode */ default_split_server_count = 0;
/* split: no create: disallow users creating channels on split */ no_create_on_split = no;
/* split: no join: disallow users joining channels at all on a split */ no_join_on_split = no;
/* burst topicwho: when bursting topics, also burst the topic setter */ burst_topicwho = yes;
/* only ascii channels: disable local users joining channels * containing characters outside the range 33-126 (non-printable * or non-ASCII). */ only_ascii_channels = no;
/* resv_forcepart: force any local users to part a channel * when a RESV is issued. */ resv_forcepart = yes;
/* channel target change: restrict how many channels users can * message per unit of time. IRC operators, channel operators and * voiced users are exempt. */ channel_target_change = yes;
/* disable local channels: if yes, then local channels will not be * supported. */ disable_local_channels = no;
/* autochanmodes: the channel modes that should be automatically set * when a channel is created. */ autochanmodes = "+nt";
/* autotopic - On create topic. Default topic will be none */ autotopic = "Please set a topic, and if necessary, register this channel.";
/* displayed_usercount: the minimum amount of users on a channel before it * is displayed in LIST. this parameter can be overridden using ELIST parameters, * such as LIST >0. */ displayed_usercount = 3;
/* strip_topic_colors: whether or not color codes in TOPIC should be stripped. */ strip_topic_colors = no;
/* opmod_send_statusmsg: format messages sent to ops due to +z * as PRIVMSG @#channel when sent to clients. */ opmod_send_statusmsg = no;
/* cycle_host_change: Should a user be cycled in the channels cycle_host_change = yes;
/* ip_bans_through_vhost: should channel IP bans see through dynamic spoofed hosts? */ ip_bans_through_vhost = yes;
/* invite_notify_notice: when using extensions/invite_notify, should * we send a NOTICE to clients that don't support IRCv3 invite-notify */ invite_notify_notice = yes;};
/* The serverhide block contains the options regarding serverhiding */serverhide { /* flatten links: this option will hide various routing information * and make all servers in /links appear that they are linked to * this server. */ flatten_links = no;
/* links delay: how long to wait before showing splits or new * servers in a flattened /links output. */ links_delay = 5 minutes;
/* hidden: hide this server from a /links output on servers with * flatten_links enabled. this allows hub servers to be hidden etc. */ hidden = no;
/* disable hidden: prevent servers hiding themselves from a * /links ouput. */ disable_hidden = no;};
/* These are the DNSBL settings. * You can have multiple combinations of host and rejection reasons. * They are used in pairs of one host/rejection reason. * * The default settings should be adequate for most networks. * * It is not recommended to use DNSBL services designed for e-mail spam * prevention, such as SPEWS for blocking IRC connections. * * As of charybdis 2.2, you can do some keyword substitution on the rejection * reason. The available keyword substitutions are: * * ${ip} - the user's IP * ${host} - the user's canonical hostname * ${dnsbl-host} - the dnsbl hostname the lookup was done against * ${nick} - the user's nickname * ${network-name} - the name of the network * * As of charybdis 3.4, a type parameter is supported, which specifies the * address families the blacklist supports. IPv4 and IPv6 are supported. * IPv4 is currently the default as few blacklists support IPv6 operation * as of this writing. * * As of charybdis 3.5, a matches parameter is allowed; if omitted, any result * is considered a match. If included, a comma-separated list of *quoted* * strings is allowed to match queries. They may be of the format "0" to "255" * to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match * an A record. The blacklist is only applied if it matches anything in the * list. You may freely mix full IP's and final octets. * * Consult your DNSBL provider for the meaning of these parameters; they * are usually used to denote different block reasons. */dnsbl { host = "rbl.efnetrbl.org"; type = ipv4; reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
/* Example of a blacklist that supports both IPv4 and IPv6 and using matches */# host = "foobl.blacklist.invalid";# type = ipv4, ipv6;# matches = "4", "6", "127.0.0.10";# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect";};
/* These are the OPM settings. * This is similar to the functionality provided by BOPM. It will scan incoming * connections for open proxies by connecting to clients and attempting several * different open proxy handshakes. If they connect back to us (via a dedicated * listening port), and send back the data we send them, they are considered * an open proxy. For politeness reasons (users may be confused by the incoming * connection attempts if they are logging incoming connections), the user is * notified upon connect if they are being scanned. * * WARNING: * These settings are considered experimental. Only the most common proxy types * are checked for (Charybdis is immune from POST and GET proxies). If you are * not comfortable with experimental code, do not use this feature. */#opm { /* IPv4 address to listen on. This must be a publicly facing IP address * to be effective. * If omitted, it defaults to serverinfo::vhost. */ #listen_ipv4 = "127.0.0.1";
/* IPv4 port to listen on. * This should not be the same as any existing listeners. */ #port_v4 = 32000;
/* IPv6 address to listen on. This must be a publicly facing IP address * to be effective. * If omitted, it defaults to serverinfo::vhost6. */ #listen_ipv6 = "::1";
/* IPv6 port to listen on. * This should not be the same as any existing listeners. */ #port_v6 = 32000;
/* You can also set the listen_port directive which will set both the * IPv4 and IPv6 ports at once. */ #listen_port = 32000;
/* This sets the timeout in seconds before ending open proxy scans. * Values less than 1 or greater than 60 are ignored. * It is advisable to keep it as short as feasible, so clients do not * get held up by excessively long scan times. */ #timeout = 5;
/* These are the ports to scan for SOCKS4 proxies on. They may overlap * with other scan types. Sensible defaults are given below. */ #socks4_ports = 80, 443, 1080, 8000, 8080, 10800;
/* These are the ports to scan for SOCKS5 proxies on. They may overlap * with other scan types. Sensible defaults are given below. */ #socks5_ports = 80, 443, 1080, 8000, 8080, 10800;
/* These are the ports to scan for HTTP CONNECT proxies on (plaintext). * They may overlap with other scan types. Sensible defaults are given * below. */ #httpconnect_ports = 80, 8080, 8000;
/* These are the ports to scan for HTTPS CONNECT proxies on (SSL). * They may overlap with other scan types. Sensible defaults are given * below. */ #httpsconnect_ports = 443, 4443;#};
/* * Alias blocks allow you to define custom commands. (Old m_sshortcut.c) * They send PRIVMSG to the given target. A real command takes * precedence above an alias. */alias "NickServ" { /* the name must go above */
/* target: the target nick (must be a network service) or * user@server (cannot be this server, only opers can use * user starting with "opers" reliably, interpreted on the target * server only so you may need to use nick@server instead) */ target = "NickServ";};
alias "ChanServ" { target = "ChanServ";};
alias "OperServ" { target = "OperServ";};
alias "MemoServ" { target = "MemoServ";};
alias "NS" { target = "NickServ";};
alias "CS" { target = "ChanServ";};
alias "OS" { target = "OperServ";};
alias "MS" { target = "MemoServ";};
/* The general block contains many of the options that were once compiled * in options in config.h. The general block is read at start time. */general { /* hide error messages: defines whether error messages from * servers that are not deemed fully safe are hidden or not. * These can sometimes contain IPs and can have an adverse * effect on server ip hiding. Set to: * yes: hide from opers and admin * opers: hide from opers only * no: do not hide error messages * Admins on other servers count as opers. */ hide_error_messages = opers;
/* hide spoof ips: hide the real ips of auth{} spoofed users * If disabled, local opers can see them. * Dynamic spoofs (e.g. set by services) are unaffected by this; * any oper (local and remote) can see the real ip. */ hide_spoof_ips = yes;
/* default umodes: umodes to set upon connection * If you have enabled the ip_cloaking extension, and you wish for * incoming clients to be set +h or +x upon connection, add +h or +x to the umode * string below. */ default_umodes = "+i";
/* default operstring: defines the default oper response * in /whois queries, eg "is an IRC Operator". * After startup use /quote set operstring to change. */ default_operstring = "is an IRC Operator";
/* default adminstring: defines the default admin response * in /whois queries, eg "is a Server Administrator". * After startup use /quote set adminstring to change. */ default_adminstring = "is a Server Administrator";
/* servicestring: defines the response for opered services (+S) * in /whois queries, eg "is a Network Service". * This is updated on rehash. */ servicestring = "is a Network Service";
/* * Nick of the network's SASL agent. Used to check whether services are here, * SASL credentials are only sent to its server. Needs to be a service. * * Defaults to SaslServ if unspecified. */ sasl_service = "SaslServ";
/* disable fake channels: disable local users joining fake versions * of channels, eg #foo^B^B. Disables bold, mirc colour, reverse, * underline and hard space. (ASCII 2, 3, 22, 31, 160 respectively). */ disable_fake_channels = no;
/* tkline_expire_notices: give a notice to opers when a tkline * expires */ tkline_expire_notices = no;
/* floodcount: the default value of floodcount that is configurable * via /quote set floodcount. This is the amount of lines a user * may send to any other user/channel in one second. */ default_floodcount = 10;
/* failed oper notice: send a notice to all opers on the server when * someone tries to OPER and uses the wrong password, host or ident. */ failed_oper_notice = yes;
/* dots in ident: the amount of '.' characters permitted in an ident * reply before the user is rejected. */ dots_in_ident = 2;
/* min nonwildcard: the minimum non wildcard characters in k/d/g lines * placed via the server. klines hand placed are exempt from limits. * wildcard chars: '.' '*' '?' '@' */ min_nonwildcard = 4;
/* min nonwildcard simple: the minimum non wildcard characters in * xlines/resvs placed via the server. * wildcard chars: '*' '?' */ min_nonwildcard_simple = 3;
/* max accept: maximum allowed /accept's for +g usermode */ max_accept = 20;
/* max monitor: the maximum amount of nicknames a client may have in * their monitor (server-side notify) list. */ max_monitor = 100;
/* nick flood: enable the nickflood control code */ anti_nick_flood = yes;
/* nick flood: the nick changes allowed in the specified period */ max_nick_time = 20 seconds; max_nick_changes = 5;
/* anti spam time: the minimum time a user must be connected before * custom quit messages are allowed. */ anti_spam_exit_message_time = 5 minutes;
/* ts delta: the time delta allowed between server clocks before * a warning is given, or before the link is dropped. all servers * should run ntpdate/rdate to keep clocks in sync */ ts_warn_delta = 30 seconds; ts_max_delta = 5 minutes;
/* client exit: prepend a user's quit message with "Quit: " */ client_exit = yes;
/* collision fnc: change user's nick to their UID instead of * killing them, if possible. This setting only applies to nick * collisions detected on this server. Only enable this if * all servers on the network allow remote nicks to start with * a digit. */ collision_fnc = yes;
/* resv fnc: change a user's nick to a nick they have recently used * (or their UID, if no such nick can be found) when a resv matching * them is set by services. Only enable this if all servers on the * network allow remote nicks to start with a digit. */ resv_fnc = yes;
/* global snotices: send out certain snotices (most +b, +f, +y, * some +s) to other servers via ENCAP SNOTE. Received SNOTEs are * displayed unconditionally. */ global_snotices = yes;
/* dline reason: show the user the dline reason when they connect * and are dlined. */ dline_with_reason = yes;
/* kline reason: show the user the reason why they are k/dlined * on exit. may give away who set k/dline when set via tcm. */ kline_with_reason = yes;
/* tkline duration: when showing users their k/dline reason (see * kline_with_reason), don't add "Temporary K-line 123 min." */ hide_tkdline_duration = no;
/* kline reason: make the users quit message on channels this * reason instead of the oper's reason. */ kline_reason = "Connection closed";
/* SASL access only client message: give users a message that * informs them */ sasl_only_client_message = "You need to identify via SASL to use this server.";
/* Identd access only client message: give users a message that * informs them */ identd_only_client_message = "You need to install identd to use this server.";
/* SCTP forbidden client message: give users a message that * informs them */ sctp_forbidden_client_message = "You are not allowed to use SCTP on this server.";
/* SSL/TLS access only client message: give users a message that * informs them */ ssltls_only_client_message = "You need to use SSL/TLS to use this server.";
/* Not authorised client message: tell users that they are not * authorised */ not_authorised_client_message = "You are not authorised to access this server.";
/* Illegal hostname client message: tell users that they have illegal * chars in their hostname */ illegal_hostname_client_message = "You have an illegal character in your hostname.";
/* Server full client message: tell users that the server they're connecting * to is full */ server_full_client_message = "Sorry, server is full - try later";
/* illegal name long client message: long-form explanation that their username * contains illegal characters */ illegal_name_long_client_message = "Your username is invalid. Please make sure that your username contains only alphanumeric characters.";
/* illegal name short client message: short-form notification that their username * contains illegal characters; will be followed by ": their_username" */ illegal_name_short_client_message = "Invalid username";
/* identify to services via server password * if auth{} block had no password but the user specified a * server password anyway, send a PRIVMSG to <identify_service> * with as text <identify_command> <password>. */ identify_service = "NickServ@services.int"; identify_command = "IDENTIFY";
/* non redundant klines: flag and ignore redundant klines */ non_redundant_klines = yes;
/* warn no nline: warn opers about servers that try to connect but * we dont have a connect {} block for. Twits with misconfigured * servers can get really annoying with this enabled. */ warn_no_nline = yes;
/* use propagated bans: KLINE, XLINE and RESV set fully propagated bans. * That means the bans are part of the netburst and restarted/split * servers will get them, but they will not apply to 3.2 and older * servers at all. */ use_propagated_bans = yes;
/* stats e disabled: disable stats e. useful if server ips are * exempted and you dont want them listing on irc. */ stats_e_disabled = no;
/* stats c oper only: make stats c (connect {}) oper only */ stats_c_oper_only = no;
/* stats y oper only: make stats y (class {}) oper only */ stats_y_oper_only = no;
/* stats o oper only: make stats o (opers) oper only */ stats_o_oper_only = yes;
/* stats P oper only: make stats P (ports) oper only * NOTE: users doing stats P will never be given the ips that the * server listens on, simply the ports. */ stats_P_oper_only = no;
/* stats i oper only: make stats i (auth {}) oper only. set to: * yes: show users no auth blocks, made oper only. * masked: show users first matching auth block * no: show users all auth blocks. */ stats_i_oper_only = masked;
/* stats k/K oper only: make stats k/K (klines) oper only. set to: * yes: show users no auth blocks, made oper only * masked: show users first matching auth block * no: show users all auth blocks. */ stats_k_oper_only = masked;
/* stats l/L oper only: * yes: non-opers can't use this at all * self: non-opers see only themselves * no: show targeted users or non-hidden opers to everyone */ stats_l_oper_only = self;
/* map oper only: make /map oper only */ map_oper_only = no;
/* operspy admin only: make operspy notices to +Z admin only */ operspy_admin_only = no;
/* operspy dont care user info: treat /who mask as if there was * an '!' always; do not log or server notice about operspy * /who mask, /masktrace and /scan. channel information is still * protected. */ operspy_dont_care_user_info = no;
/* caller id wait: time between notifying a +g user that somebody * is messaging them. */ caller_id_wait = 1 minute;
/* pace wait simple: time between use of less intensive commands * (HELP, remote WHOIS, WHOWAS) */ pace_wait_simple = 1 second;
/* pace wait: time between more intensive commands * (ADMIN, INFO, LIST, LUSERS, MOTD, STATS, VERSION) */ pace_wait = 10 seconds;
/* short motd: send clients a notice telling them to read the motd * instead of forcing a motd to clients who may simply ignore it. */ short_motd = no;
/* ping cookies: require clients to respond exactly to a ping command, * can help block certain types of drones and FTP PASV mode spoofing. */ ping_cookie = no;
/* ping warn time: how long to wait after pinging a server before starting * to complain it is unresponsive. Note that the ping check interval is 30 * seconds, so the first complaint will come at the next check after this * time has passed. */ ping_warn_time = 15 seconds;
/* connect timeout: sets how long we should wait for a connection * request to succeed */ connect_timeout = 30 seconds;
/* ident timeout: Amount of time (in seconds) that the IRCd will * wait for a user to respond to an ident request. */ default_ident_timeout = 5;
/* disable auth: disables identd checking */ disable_auth = no;
/* no oper flood: increase flood limits for opers. */ no_oper_flood = yes;
/* REMOVE ME. The following line checks you've been reading. */ havent_read_conf = yes;
/* max targets: the maximum amount of targets in a single * PRIVMSG/NOTICE. set to 999 NOT 0 for unlimited. */ max_targets = 4;
/* post-registration delay: wait this long before processing commands from a newly * registered user. Used to allow network utility bots to perform any actions * (such as host changes or proxy scanning) before the user can join channels. */ post_registration_delay = 2 seconds;
/* use_whois_actually: send clients requesting a whois a numeric * giving the real IP of non-spoofed clients to prevent DNS abuse. */ use_whois_actually = yes;
/* usermodes configurable: a list of usermodes for the options below * * +B - bot - Marked as a bot in WHOIS * +D - deaf - Don't see channel messages * +i - invisible - Not shown in NAMES or WHO unless you share a * a channel * +Q - noforward - Unaffected by channel forwarding * +s - servnotice - See server notices * +w - wallop - See oper and server generated WALLOPS * +z - operwall - See operwalls */
/* oper only umodes: usermodes only opers may set */ oper_only_umodes = operwall, servnotice;
/* oper umodes: default usermodes opers get when they /oper */ oper_umodes = servnotice, operwall, wallop;
/* oper snomask: default snomask opers get when they /oper, * provided they have umode +s set */ oper_snomask = "+s";
/* burst_away: This enables bursting away messages to servers. * With this disabled, we will only propogate AWAY messages * as users send them, but never burst them. Be warned though * enabling this could increase the size of a burst significantly * for a large network, like EFnet. */ burst_away = yes;
/* nick delay: This locks nicks of split clients for the given time * or until a remote client uses the nick. This significantly * reduces nick collisions on short splits but it can be annoying. * To make things as fair as possible, this should be the same on * all servers. If you enable this, the suggested value is 15 minutes. */ nick_delay = 0 seconds;
/* reject time: the amount of rejections through klines/dlines etc * allowed in the given time before the rejection is cached and * a pseudo temp dline is placed */ reject_ban_time = 1 minute; reject_after_count = 3;
/* reject duration: the amount of time to cache the rejection */ reject_duration = 5 minutes;
/* throttle_duration: Amount of time that throttling will be applied to an IP * address. */ throttle_duration = 60;
/* throttle_count: Number of connections within throttle_duration that it takes * for throttling to take effect */ throttle_count = 4;
/* client flood_max_lines: maximum number of lines in a clients queue before * they are dropped for flooding. */ client_flood_max_lines = 20;
/* Flood control settings. DO NOT CHANGE THESE without extensive discussion * and testing by someone who knows exactly what they do. * * These settings replicate charybdis-3.3 behaviour. */ client_flood_burst_rate = 40; client_flood_burst_max = 5; client_flood_message_time = 1; client_flood_message_num = 2;
/* max_ratelimit_tokens: the maximum number of ratelimit tokens that one * user can accumulate. This attempts to limit the amount of outbound * bandwidth one user can consume. Do not change unless you know what * you're doing. */ max_ratelimit_tokens = 30;
/* away_interval: the minimum interval between AWAY commands. One * additional AWAY command is allowed, and only marking as away * counts. */ away_interval = 30;
/* certfp_method: the method that should be used for computing certificate fingerprints. * Acceptable options are sha1, sha256, spki_sha256, sha512 and spki_sha512. Networks * running versions of charybdis prior to charybdis 3.5 MUST use sha1 for certfp_method. * * The spki_* variants operate on the SubjectPublicKeyInfo of the certificate, which does * not change unless the private key is changed. This allows the fingerprint to stay * constant even if the certificate is reissued. These fingerprints will be prefixed with * "SPKI:SHA2-256:" or "SPKI:SHA2-512:" depending on the hash type. These fingerprints * are not supported on servers running charybdis 3.5.3 or earlier. * * To generate a fingerprint from a certificate file, please use the mkfingerprint utility * program located in the bin/ subdirectory of your IRCd installation. Running it with no * arguments will give you a brief usage message; it takes method and filename arguments. */ certfp_method = spki_sha256;
/* hide_opers_in_whois: if set to YES, then oper status will be hidden in /WHOIS output. */ hide_opers_in_whois = no; /* hide_opers: Hide all opers from unprivileged users */ hide_opers = no;
/* tls_ciphers_oper_only: show the TLS cipher string in /WHOIS only to opers and self */ tls_ciphers_oper_only = no;
/* hidden_caps: client capabilities we'll pretend we don't support until they're requested */ #hidden_caps = "userhost-in-names";
/* oper_secure_only: require TLS on any connection trying to oper up */ oper_secure_only = no;
/* drain_reason: Message shown to users when they are rejected from a draining server. * requires extensions/drain to be loaded. */ drain_reason = "This server is not accepting connections.";
/* filter_sees_user_info: Whether the filter is given the nick!user@host of message senders. * If set to NO, the filter is given a literal "*!*@*" instead. * Requires extensions/filter to be loaded. */ #filter_sees_user_info = no;
/* filter_bypass_all: If set to NO, the only filter action that can bypass +u is DROP when paired with BYPASS. * If set to YES, all filter actions can bypass +u when paired with BYPASS. * Requires extensions/filter to be loaded. */ #filter_bypass_all = no;
/* filter_exit_message: The QUIT message shown when a user is disconnected due to the filter KILL action. * Requires extensions/filter to be loaded. */ #filter_exit_message = "Connection closed";};
/* The quarantine block is only used if you have the m_quarantine extension loaded; * it will not be valid (and should not exist) otherwise. */#quarantine { /* allow_channels: Quarantined users will be able to JOIN and speak in this channel. * If omitted, no channels are allowed. Multiple channels can be listed separated by commas. */ #allow_channels = "#help";
/* apply_msg: Notice sent to users that have been quarantined */ #apply_msg = "You have been quarantined and must log into your NickServ account before you can join channels. Please see /STATS p for assistance.";
/* join_reason: Message displayed to quarantined users when they are denied JOINing a channel */ #join_reason = "Cannot join channel (usermode +q) - you need to be logged into your NickServ account";
/* msg_reason: Message displayed to quarantined users when they are denied messaging a nick/channel */ #msg_reason = "Cannot send to nick/channel (usermode +q) - you need to be logged into your NickServ account";
/* other_msg_reason: Message displayed to other users when they are denied messaging a quarantined user */ #other_msg_reason = "Cannot send to user - they are quarantined and will be unable to respond to you";
/* part_channels: If yes (default), quarantining a user will cause them to part all channels * that are not allowed via allow_channels. */ #part_channels = yes;
/* remove_msg: Notice sent to users that are no longer quarantined */ #remove_msg = "You are no longer quarantined and can freely join channels.";#};
modules { /* module path: paths to search for modules specified below and * in /modload. */ path = "/usr/local/ircd/modules"; path = "/usr/local/ircd/modules/autoload";
/* module: the name of a module to load on startup/rehash */ #module = "some_module";};