Something went wrong. Try again.
[READ-ONLY] Mirror of https://github.com/VibeDevelopers/Comet.
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637/* doc/ircd.conf.example - brief example configuration file * * Copyright (C) 2000-2002 Hybrid Development Team * Copyright (C) 2002-2005 ircd-ratbox development team * Copyright (C) 2005-2006 charybdis development team * * See reference.conf for more information. */
/* Extensions */#loadmodule "extensions/chm_nonotice";#loadmodule "extensions/chm_operpeace";#loadmodule "extensions/createauthonly";#loadmodule "extensions/extb_account";#loadmodule "extensions/extb_canjoin";#loadmodule "extensions/extb_channel";#loadmodule "extensions/extb_combi";#loadmodule "extensions/extb_extgecos";#loadmodule "extensions/extb_hostmask";#loadmodule "extensions/extb_oper";#loadmodule "extensions/extb_realname";#loadmodule "extensions/extb_server";#loadmodule "extensions/extb_ssl";#loadmodule "extensions/extb_usermode";#loadmodule "extensions/hurt";#loadmodule "extensions/m_extendchans";#loadmodule "extensions/m_findforwards";#loadmodule "extensions/m_identify";#loadmodule "extensions/no_oper_invis";#loadmodule "extensions/sno_farconnect";#loadmodule "extensions/sno_globalnickchange";#loadmodule "extensions/sno_globaloper";#loadmodule "extensions/override";#loadmodule "extensions/no_kill_services";#loadmodule "extensions/tag_message_id"
/* * IP cloaking extensions: use ip_cloaking_4.0 * if you're linking 3.2 and later, otherwise use * ip_cloaking, for compatibility with older 3.x * releases. */
#loadmodule "extensions/ip_cloaking_4.0";#loadmodule "extensions/ip_cloaking";
serverinfo { name = "hades.arpa"; sid = "42X"; description = "comet test server"; network_name = "StaticBox";
/* On multi-homed hosts you may need the following. These define * the addresses we connect from to other servers. */ /* for IPv4 */ #vhost = "192.0.2.6"; /* for IPv6 */ #vhost6 = "2001:db8:2::6";
/* ssl_cert: certificate (and optionally key) for our ssl server */ ssl_cert = "etc/ssl.pem";
/* ssl_private_key: our ssl private key (if not contained in ssl_cert file) */ #ssl_private_key = "etc/ssl.key";
/* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 2048 * In general, the DH parameters size should be the same as your key's size. * However it has been reported that some clients have broken TLS implementations which may * choke on keysizes larger than 2048-bit, so we would recommend using 2048-bit DH parameters * for now if your keys are larger than 2048-bit. * * If you do not provide parameters, some TLS backends will fail on DHE- ciphers, * and some will succeed but use weak, common DH groups! */ ssl_dh_params = "etc/dh.pem";
/* ssld_count: number of ssld processes you want to start, if you * have a really busy server, using N-1 where N is the number of * cpu/cpu cores you have might be useful. A number greater than one * can also be useful in case of bugs in ssld and because ssld needs * two file descriptors per SSL connection. */ ssld_count = 1;
/* default max clients: the default maximum number of clients * allowed to connect. This can be changed once ircd has started by * issuing: * /quote set maxclients <limit> */ default_max_clients = 1024;
/* nicklen: enforced nickname length (for this server only; must not * be longer than the maximum length set while building). */ nicklen = 30;};
admin { name = "Lazy admin (lazya)"; description = "StaticBox client server"; email = "nobody@127.0.0.1";};
log { fname_userlog = "logs/userlog"; #fname_fuserlog = "logs/fuserlog"; fname_operlog = "logs/operlog"; #fname_foperlog = "logs/foperlog"; fname_serverlog = "logs/serverlog"; #fname_klinelog = "logs/klinelog"; fname_killlog = "logs/killlog"; fname_operspylog = "logs/operspylog"; #fname_ioerrorlog = "logs/ioerror";};
/* class {} blocks MUST be specified before anything that uses them. That * means they must be defined before auth {} and before connect {}. */class "users" { ping_time = 2 minutes; number_per_ident = 10; number_per_ip = 10; number_per_ip_global = 50; cidr_ipv4_bitlen = 24; cidr_ipv6_bitlen = 64; number_per_cidr = 200; max_number = 3000; sendq = 400 kbytes;};
class "opers" { ping_time = 5 minutes; number_per_ip = 10; max_number = 1000; sendq = 1 megabyte;};
class "server" { ping_time = 5 minutes; connectfreq = 5 minutes; max_number = 1; max_autoconn = 1; sendq = 4 megabytes;};
listen { /* defer_accept: wait for clients to send IRC handshake data before * accepting them. if you intend to use software which depends on the * server replying first, such as BOPM, you should disable this feature. * otherwise, you probably want to leave it on. */ defer_accept = yes;
/* If you want to listen on a specific IP only, specify host. * host definitions apply only to the following port line. */ #host = "192.0.2.6"; port = 5000, 6665 .. 6669; sslport = 6697;
/* Listen on IPv6 (if you used host= above). */ #host = "2001:db8:2::6"; #port = 5000, 6665 .. 6669; #sslport = 6697;};
/* auth {}: allow users to connect to the ircd (OLD I:) * auth {} blocks MUST be specified in order of precedence. The first one * that matches a user will be used. So place spoofs first, then specials, * then general access, then restricted. */auth { /* user: the user@host allowed to connect. Multiple IPv4/IPv6 user * lines are permitted per auth block. This is matched against the * hostname and IP address (using :: shortening for IPv6 and * prepending a 0 if it starts with a colon) and can also use CIDR * masks. */ user = "*@198.51.100.0/24"; user = "*test@2001:db8:1:*";
/* password: an optional password that is required to use this block. * By default this is not encrypted, specify the flag "encrypted" in * flags = ...; below if it is. */ password = "letmein";
/* spoof: fake the users user@host to be be this. You may either * specify a host or a user@host to spoof to. This is free-form, * just do everyone a favour and dont abuse it. (OLD I: = flag) */ spoof = "I.still.hate.packets";
/* Possible flags in auth: * * encrypted | password is encrypted with mkpasswd * spoof_notice | give a notice when spoofing hosts * exceed_limit (old > flag) | allow user to exceed class user limits * kline_exempt (old ^ flag) | exempt this user from k/g/xlines, * | dnsbls, and proxies * proxy_exempt | exempt this user from proxies * dnsbl_exempt | exempt this user from dnsbls * spambot_exempt | exempt this user from spambot checks * shide_exempt | exempt this user from serverhiding * jupe_exempt | exempt this user from generating * warnings joining juped channels * resv_exempt | exempt this user from resvs * flood_exempt | exempt this user from flood limits * USE WITH CAUTION. * no_tilde (old - flag) | don't prefix ~ to username if no ident * need_ident (old + flag) | require ident for user in this class * need_ssl | require SSL/TLS for user in this class * need_sasl | require SASL id for user in this class */ flags = kline_exempt, exceed_limit;
/* class: the class the user is placed in */ class = "opers";};
auth { user = "*@*"; class = "users";};
/* privset {} blocks MUST be specified before anything that uses them. That * means they must be defined before operator {}. */privset "local_op" { privs = oper:general, oper:privs, oper:testline, oper:kill, oper:operwall, oper:message, usermode:servnotice, auspex:oper, auspex:hostname, auspex:umodes, auspex:cmodes;};
privset "server_bot" { extends = "local_op"; privs = oper:kline, oper:remoteban, snomask:nick_changes;};
privset "global_op" { extends = "local_op"; privs = oper:routing, oper:kline, oper:unkline, oper:xline, oper:resv, oper:cmodes, oper:mass_notice, oper:wallops, oper:remoteban;};
privset "admin" { extends = "global_op"; privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:grant;};
operator "god" { /* name: the name of the oper must go above */
/* user: the user@host required for this operator. CIDR *is* * supported now. auth{} spoofs work here, other spoofs do not. * multiple user="" lines are supported. */ user = "*god@127.0.0.1";
/* password: the password required to oper. Unless ~encrypted is * contained in flags = ...; this will need to be encrypted using * mkpasswd, MD5 is supported */ password = "etcnjl8juSU1E";
/* rsa key: the public key for this oper when using Challenge. * A password should not be defined when this is used, see * doc/challenge.txt for more information. */ #rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
/* umodes: the specific umodes this oper gets when they oper. * If this is specified an oper will not be given oper_umodes * These are described above oper_only_umodes in general {}; */ #umodes = servnotice, operwall, wallop;
/* fingerprint: if specified, the oper's client certificate * fingerprint will be checked against the specified fingerprint * below. */ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
/* snomask: specific server notice mask on oper up. * If this is specified an oper will not be given oper_snomask. */ snomask = "+Zbfkrsuy";
/* flags: misc options for the operator. You may prefix an option * with ~ to disable it, e.g. ~encrypted. * * Default flags are encrypted. * * Available options: * * encrypted: the password above is encrypted [DEFAULT] * need_ssl: must be using SSL/TLS to oper up */ flags = encrypted;
/* privset: privileges set to grant */ privset = "admin";};
/* See connecting-servers.rst for an introduction to using these files. */
connect "irc.uplink.com" { host = "203.0.113.3"; send_password = "password"; accept_password = "anotherpassword"; port = 6666; class = "server"; flags = topicburst;
#fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";};
connect "ssl.uplink.com" { host = "203.0.113.129"; send_password = "password"; accept_password = "anotherpassword"; port = 9999; class = "server"; flags = ssl, topicburst;};
service { name = "services.int";};
cluster { name = "*"; flags = kline, tkline, unkline, xline, txline, unxline, resv, tresv, unresv;};
secure { ip = "127.0.0.1";};
/* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */exempt { ip = "127.0.0.1";};
channel { use_invex = yes; use_except = yes; use_forward = yes; use_knock = yes; knock_delay = 5 minutes; knock_delay_channel = 1 minute; max_chans_per_user = 15; max_chans_per_user_large = 60; max_bans = 100; max_bans_large = 500; default_split_user_count = 0; default_split_server_count = 0; no_create_on_split = no; no_join_on_split = no; burst_topicwho = yes; only_ascii_channels = no; resv_forcepart = yes; channel_target_change = yes; disable_local_channels = no; autochanmodes = "+nt"; autotopic = "Please set a topic, and if necessary, register this channel."; displayed_usercount = 3; strip_topic_colors = no; cycle_host_change = no; opmod_send_statusmsg = no; invite_notify_notice = yes;};
serverhide { flatten_links = yes; links_delay = 5 minutes; hidden = no; disable_hidden = no;};
/* These are the DNSBL settings. * You can have multiple combinations of host and rejection reasons. * They are used in pairs of one host/rejection reason. * * The default settings should be adequate for most networks. * * It is not recommended to use DNSBL services designed for e-mail spam * prevention, such as SPEWS for blocking IRC connections. * * As of charybdis 2.2, you can do some keyword substitution on the rejection * reason. The available keyword substitutions are: * * ${ip} - the user's IP * ${host} - the user's canonical hostname * ${dnsbl-host} - the dnsbl hostname the lookup was done against * ${nick} - the user's nickname * ${network-name} - the name of the network * * As of charybdis 3.4, a type parameter is supported, which specifies the * address families the blacklist supports. IPv4 and IPv6 are supported. * IPv4 is currently the default as few blacklists support IPv6 operation * as of this writing. * * As of charybdis 3.5, a matches parameter is allowed; if omitted, any result * is considered a match. If included, a comma-separated list of *quoted* * strings is allowed to match queries. They may be of the format "0" to "255" * to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match * an A record. The DNSBL match is only applied if it matches anything in the * list. You may freely mix full IP's and final octets. * * Consult your DNSBL provider for the meaning of these parameters; they * are usually used to denote different block reasons. */dnsbl { host = "rbl.efnetrbl.org"; type = ipv4; reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
/* Example of a blacklist that supports both IPv4 and IPv6 and using matches */# host = "foobl.blacklist.invalid";# type = ipv4, ipv6;# matches = "4", "6", "127.0.0.10";# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect";};
/* These are the OPM settings. * This is similar to the functionality provided by BOPM. It will scan incoming * connections for open proxies by connecting to clients and attempting several * different open proxy handshakes. If they connect back to us (via a dedicated * listening port), and send back the data we send them, they are considered * an open proxy. For politeness reasons (users may be confused by the incoming * connection attempts if they are logging incoming connections), the user is * notified upon connect if they are being scanned. * * WARNING: * These settings are considered experimental. Only the most common proxy types * are checked for (Charybdis is immune from POST and GET proxies). If you are * not comfortable with experimental code, do not use this feature. */#opm { /* IPv4 address to listen on. This must be a publicly facing IP address * to be effective. * If omitted, it defaults to serverinfo::vhost. */ #listen_ipv4 = "127.0.0.1";
/* IPv4 port to listen on. * This should not be the same as any existing listeners. */ #port_v4 = 32000;
/* IPv6 address to listen on. This must be a publicly facing IP address * to be effective. * If omitted, it defaults to serverinfo::vhost6. */ #listen_ipv6 = "::1";
/* IPv6 port to listen on. * This should not be the same as any existing listeners. */ #port_v6 = 32000;
/* You can also set the listen_port directive which will set both the * IPv4 and IPv6 ports at once. */ #listen_port = 32000;
/* This sets the timeout in seconds before ending open proxy scans. * Values less than 1 or greater than 60 are ignored. * It is advisable to keep it as short as feasible, so clients do not * get held up by excessively long scan times. */ #timeout = 5;
/* These are the ports to scan for SOCKS4 proxies on. They may overlap * with other scan types. Sensible defaults are given below. */ #socks4_ports = 1080, 10800, 443, 80, 8080, 8000;
/* These are the ports to scan for SOCKS5 proxies on. They may overlap * with other scan types. Sensible defaults are given below. */ #socks5_ports = 1080, 10800, 443, 80, 8080, 8000;
/* These are the ports to scan for HTTP connect proxies on (plaintext). * They may overlap with other scan types. Sensible defaults are given * below. */ #httpconnect_ports = 80, 8080, 8000;
/* These are the ports to scan for HTTPS CONNECT proxies on (SSL). * They may overlap with other scan types. Sensible defaults are given * below. */ #httpsconnect_ports = 443, 4443;#};
alias "NickServ" { target = "NickServ";};
alias "ChanServ" { target = "ChanServ";};
alias "OperServ" { target = "OperServ";};
alias "MemoServ" { target = "MemoServ";};
alias "NS" { target = "NickServ";};
alias "CS" { target = "ChanServ";};
alias "OS" { target = "OperServ";};
alias "MS" { target = "MemoServ";};
general { hide_error_messages = opers; hide_spoof_ips = yes;
/* * default_umodes: umodes to enable on connect. * If you have enabled the new ip_cloaking_4.0 module, and you want * to make use of it, add +x to this option, i.e.: * default_umodes = "+ix"; * * If you have enabled the old ip_cloaking module, and you want * to make use of it, add +h to this option, i.e.: * default_umodes = "+ih"; */ default_umodes = "+i";
default_operstring = "is an IRC Operator"; default_adminstring = "is a Server Administrator"; servicestring = "is a Network Service";
/* * Nick of the network's SASL agent. Used to check whether services are here, * SASL credentials are only sent to its server. Needs to be a service. * * Defaults to SaslServ if unspecified. */ sasl_service = "SaslServ"; disable_fake_channels = no; tkline_expire_notices = no; default_floodcount = 10; failed_oper_notice = yes; dots_in_ident = 2; min_nonwildcard = 4; min_nonwildcard_simple = 3; max_accept = 100; max_monitor = 100; anti_nick_flood = yes; max_nick_time = 20 seconds; max_nick_changes = 5; anti_spam_exit_message_time = 5 minutes; ts_warn_delta = 30 seconds; ts_max_delta = 5 minutes; client_exit = yes; collision_fnc = yes; resv_fnc = yes; global_snotices = yes; dline_with_reason = yes; kline_with_reason = yes; hide_tkdline_duration = no; kline_reason = "K-Lined"; sasl_only_client_message = "You need to identify via SASL to use this server."; identd_only_client_message = "You need to install identd to use this server."; sctp_forbidden_client_message = "You are not allowed to use SCTP on this server."; ssltls_only_client_message = "You need to use SSL/TLS to use this server."; not_authorised_client_message = "You are not authorised to access this server."; illegal_hostname_client_message = "You have an illegal character in your hostname."; server_full_client_message = "Sorry, server is full - try later"; illegal_name_long_client_message = "Your username is invalid. Please make sure that your username contains only alphanumeric characters."; illegal_name_short_client_message = "Invalid username"; identify_service = "NickServ@services.int"; identify_command = "IDENTIFY"; non_redundant_klines = yes; warn_no_nline = yes; use_propagated_bans = yes; stats_e_disabled = no; stats_c_oper_only = no; stats_y_oper_only = no; stats_o_oper_only = yes; stats_P_oper_only = no; stats_i_oper_only = masked; stats_k_oper_only = masked; map_oper_only = no; operspy_admin_only = no; operspy_dont_care_user_info = no; caller_id_wait = 1 minute; pace_wait_simple = 1 second; pace_wait = 10 seconds; short_motd = no; ping_cookie = no; connect_timeout = 30 seconds; default_ident_timeout = 5; disable_auth = no; no_oper_flood = yes; max_targets = 4; client_flood_max_lines = 20; post_registration_delay = 0 seconds; use_whois_actually = no; oper_only_umodes = operwall, servnotice; oper_umodes = servnotice, operwall, wallop; oper_snomask = "+s"; burst_away = yes; nick_delay = 0 seconds; # 15 minutes if you want to enable this reject_ban_time = 1 minute; reject_after_count = 3; reject_duration = 5 minutes; throttle_duration = 60; throttle_count = 4; max_ratelimit_tokens = 30; away_interval = 30; certfp_method = spki_sha256; hide_opers_in_whois = no; tls_ciphers_oper_only = no;};
modules { path = "modules"; path = "modules/autoload";};