--- *mini.align* Align text interactively --- --- MIT License Copyright (c) 2022 Evgeni Chasnovski --- Rich and flexible customization of both alignment rules and user interaction. --- Works with charwise, linewise, and blockwise selections in both Normal mode --- (on textobject/motion; with dot-repeat and |multicursor|) and Visual mode. --- --- Features: --- - Alignment is done in three main steps: --- - lines into parts based on Lua pattern(s) or user-supplied rule. --- - parts for certain side(s) to be same width inside columns. --- - parts to be lines, with customizable delimiter(s). --- --- Each main step can be preceded by other steps (pre-steps) to achieve --- highly customizable outcome. See `steps` value in |MiniAlign.config|. --- For more details, see |MiniAlign-glossary| and |MiniAlign-algorithm|. --- --- - User can control alignment interactively by pressing customizable modifiers --- (single keys representing how alignment steps and/or options should change). --- Some of default modifiers: --- - Press `s` to enter split Lua pattern. --- - Press `j` to choose justification side from available ones ("left", --- "center", "right", "none"). --- - Press `m` to enter merge delimiter. --- - Press `f` to enter filter Lua expression to configure which parts --- will be affected (like "align only first column"). --- - Press `i` to ignore some commonly unwanted split matches. --- - Press `p` to pair neighboring parts so they be aligned together. --- - Press `t` to trim whitespace from parts. --- - Press `` (backspace) to delete some last pre-step. --- --- For more details, see |MiniAlign-modifiers-builtin| and |MiniAlign-examples|. --- --- - Alignment can be done with instant preview (result is updated after each --- modifier) or without it (result is shown and accepted after non-default --- split pattern is set). --- --- - Every user interaction is accompanied with helper status message showing --- relevant information about current alignment process. --- --- # Setup ~ --- --- This module needs a setup with `require('mini.align').setup({})` (replace --- `{}` with your `config` table). It will create global Lua table `MiniAlign` --- which you can use for scripting or manually (with `:lua MiniAlign.*`). --- --- See |MiniAlign.config| for available config settings. --- --- You can override runtime config settings (like `config.modifiers`) locally --- to buffer inside `vim.b.minialign_config` which should have same structure --- as `MiniAlign.config`. See |mini.nvim-buffer-local-config| for more details. --- --- To stop module from showing non-error feedback, set `config.silent = true`. --- --- # Comparisons ~ --- --- - [junegunn/vim-easy-align](https://github.com/junegunn/vim-easy-align): --- - |mini.align| is mostly designed after `junegunn/vim-easy-align`, so --- there are a lot of similarities. --- - Both plugins allow users to change alignment options interactively by --- pressing modifier keys (albeit completely different default ones). --- `junegunn/vim-easy-align` has those modifiers fixed, while |mini.align| --- allows their full customization. See |MiniAlign.config| for examples. --- - `junegunn/vim-easy-align` is designed to treat delimiters differently --- than other parts of strings. |mini.align| doesn't distinguish split --- parts from one another by design: splitting is allowed to be done --- based on some other logic than by splitting on delimiters. --- - `junegunn/vim-easy-align` initially aligns by only first delimiter. --- |mini.align| initially aligns by all delimiter. --- - `junegunn/vim-easy-align` implements special filtering by delimiter --- row number. |mini.align| has builtin filtering based on Lua code --- supplied by user in modifier phase. See |MiniAlign.gen_step.filter()| --- and `f` builtin modifier. --- - |mini.align| treats any non-registered modifier as a plain delimiter --- pattern, while `junegunn/vim-easy-align` does not. --- - |mini.align| exports core Lua function used for aligning strings --- (|MiniAlign.align_strings()|). --- - [godlygeek/tabular](https://github.com/godlygeek/tabular): --- - `godlygeek/tabular` is mostly designed around single command which is --- customized by printing its parameters. |mini.align| implements --- different concept of interactive alignment through pressing --- customizable single character modifiers. --- - `godlygeek/tabular` can detect region upon which alignment can be --- desirable. |mini.align| does not by design: use Visual selection or --- textobject/motion to explicitly define region to align. --- --- # Disabling ~ --- --- To disable, set `vim.g.minialign_disable` (globally) or `vim.b.minialign_disable` --- (for a buffer) to `true`. Considering high number of different scenarios --- and customization intentions, writing exact rules for disabling module's --- functionality is left to user. See |mini.nvim-disabling-recipes| for common --- recipes. ---@tag MiniAlign --- PARTS ~ --- 2d array of strings (array of arrays of strings). --- See more in |MiniAlign.as_parts()|. --- --- ROW ~ --- First-level array of parts (like `parts[1]`). --- --- COLUMN ~ --- Array of strings, constructed from parts elements with the same --- second-level index (like `{ parts[1][1],` `parts[2][1], ... }`). --- --- STEP ~ --- A named callable. See |MiniAlign.new_step()|. When used in terms of alignment --- steps, callable takes two arguments: some object (parts or string array) --- and option table. --- --- SPLIT ~ --- Process of taking array of strings and converting it into parts. --- --- JUSTIFY ~ --- Process of taking parts and converting them to aligned parts (all elements --- have same widths inside columns). --- --- MERGE ~ --- Process of taking parts and converting it back to array of strings. Usually --- by concatenating rows into strings. --- --- REGION ~ --- Table representing region in a buffer. Fields / have inclusive --- start / end positions ( might be `nil` to describe empty region). --- Positions are also tables with and fields (both start at 1). --- --- MODE ~ --- Either charwise ("char", `v`, |charwise|), linewise ("line", `V`, |linewise|) --- or blockwise ("block", ``, |blockwise-visual|) ---@tag MiniAlign-glossary --- There are two main processes implemented in |mini.align|: strings alignment --- and interactive region alignment. See |MiniAlign-glossary| for more information --- about used terms. --- --- # Strings alignment ~ --- --- Main implementation is in |MiniAlign.align_strings()|. Its input is array of --- strings and output - array of aligned strings. The process consists from three --- main steps (split, justify, merge) which can be preceded by any number of --- preliminary steps (pre-split, pre-justify, pre-merge). --- --- Algorithm: --- - . Take input array of strings and consecutively apply all --- pre-split steps (`steps.pre_split`). Each one has `(strings, opts)` signature --- and should modify array in place. --- - . Take array of strings and convert it to parts with `steps.split()`. --- It has `(strings, opts)` signature and should return parts. --- - . Take parts and consecutively apply all pre-justify --- steps (`steps.pre_justify`). Each one has `(parts, opts)` signature and --- should modify parts in place. --- - . Take parts and apply `steps.justify()`. It has `(parts, opts)` --- signature and should modify parts in place. --- - . Take parts and consecutively apply all pre-merge --- steps (`steps.pre_merge`). Each one has `(parts, opts)` signature and --- should modify parts in place. --- - . Take parts and convert it to array of strings with `steps.merge()`. --- It has `(parts, opts)` signature and should return array of strings. --- --- Notes: --- - All table objects are initially copied so that modification in place doesn't --- affect workflow. --- - Default main steps are designed to be controlled via options. See --- |MiniAlign.align_strings()| and default step entries in |MiniAlign.gen_step|. --- - All steps are guaranteed to take same option table as second argument. --- This allows steps to "talk" to each other, i.e. earlier steps can pass data --- to later ones. --- --- # Interactive region alignment ~ --- --- Interactive alignment is a main entry point for most users. It can be done --- in two flavors: --- - . Initiated via mapping defined in `start` of --- `MiniAlign.config.mappings`. Alignment is accepted once split pattern becomes --- non-default. --- - . Initiated via mapping defined in `start_with_preview` of --- `MiniAlign.config.mappings`. Alignment result is shown after every modifier --- and is accepted after `` (`Enter`) is hit. Note: each preview is done by --- applying current alignment steps and options to the initial region lines, --- not the ones currently displaying in preview. --- --- Lifecycle (assuming default mappings): --- - : --- - In Normal mode type `ga` (or `gA` to show preview) followed by textobject --- or motion defining region to be aligned. --- - In Visual mode select region and type `ga` (or `gA` to show preview). --- Strings contained in selected region will be used as input to --- |MiniAlign.align_strings()|. --- Beware of mode when selecting region: charwise (`v`), linewise (`V`), or --- blockwise (``). They all behave differently. --- - . Press single keys one at a time: --- - If pressed key is among table keys of `modifiers` table of --- |MiniAlign.config|, its function value is executed. It usually modifies --- some options(s) and/or affects some pre-step(s). --- - If pressed key is not among defined modifiers, it is treated as plain --- split pattern. --- This process can either end by itself (usually in case of no preview and --- non-default split pattern being set) or you can choose to end it manually. --- - . In case of active preview, accept current result by --- pressing ``. Discard any result and return to initial regions with --- either `` or ``. --- --- See more in |MiniAlign-modifiers-builtin| and |MiniAlign-examples|. --- --- Notes: --- - Visual blockwise selection works best with |'virtualedit'| equal to "block" --- or "all". --- - Alignment with preview works best with |'showmode'| disabled. ---@tag MiniAlign-algorithm --- Overview of builtin modifiers --- --- All examples assume interactive alignment with preview in linewise mode. With --- default mappings, use `V` to select lines and `gA` to initiate alignment. It --- might be helpful to copy lines into modifiable buffer and experiment yourself. --- --- Notes: --- - Any pressed key which doesn't have defined modifier will be treated as --- plain split pattern. --- - All modifiers can be customized inside |MiniAlign.setup()|. See "Modifiers" --- section of |MiniAlign.config|. --- --- # Main option modifiers ~ --- --- Enter split pattern (confirm prompt by pressing ``). Input is treated --- as plain delimiter. --- --- Before: > --- a-b-c --- aa-bb-cc --- < --- After typing `s-`: > --- a -b -c --- aa-bb-cc --- < --- Choose justify side. Prompts user (with helper message) to type single --- character identifier of side: `l`eft, `c`enter, `r`ight, `n`one. --- --- Before: > --- a_b_c --- aa_bb_cc --- < --- After typing `_jr` (first make split by `_`): > --- a_ b_ c --- aa_bb_cc --- < --- Enter merge delimiter (confirm prompt by pressing ``). --- --- Before: > --- a_b_c --- aa_bb_cc --- < --- After typing `_m--` (first make split by `_`): > --- a --_--b --_--c --- aa--_--bb--_--cc --- < --- # Modifiers adding pre-steps ~ --- --- Enter filter expression. See more details in |MiniAlign.gen_step.filter()|. --- --- Before: > --- a_b_c --- aa_bb_cc --- < --- After typing `_fn==1` (first make split by `_`): > --- a _b_c --- aa_bb_cc --- < --- Ignore some split matches. It modifies `split_exclude_patterns` option by --- adding commonly wanted patterns. See more details in --- |MiniAlign.gen_step.ignore_split()|. --- --- Before: > --- /* This_is_assumed_to_be_comment */ --- a"_"_b --- aa_bb --- < --- After typing `_i` (first make split by `_`): > --- /* This_is_assumed_to_be_comment */ --- a"_"_b --- aa _bb --- < ---

Pair neighboring parts. --- --- Before: > --- a_b_c --- aaa_bbb_ccc --- < --- After typing `_p` (first make split by `_`): > --- a_ b_ c --- aaa_bbb_ccc --- < --- Trim parts from whitespace on both sides (keeping indentation). --- --- Before: > --- a _ b _ c --- aa _bb _cc --- < --- After typing `_t` (first make split by `_`): > --- a _b _c --- aa_bb_cc --- < --- # Delete some last pre-step ~ --- --- Delete one of the pre-steps. If there is only one kind of pre-steps, --- remove its latest added one. If not, prompt user to choose pre-step kind --- by entering single character: `s`plit, `j`ustify, `m`erge. --- --- Examples: --- - `tp` results in only "trim" step to be left. --- - `it` prompts to choose which step to delete (pre-split or --- pre-justify in this case). --- --- # Special configurations for common splits ~ --- --- <=> Use special pattern to align by a group of consecutive "=". It can be --- preceded by any number of punctuation marks and followed by some sommon --- punctuation characters. Trim whitespace and merge with single space. --- --- Before: > --- a=b --- aa<=bb --- aaa===bbb --- aaaa = cccc --- < --- After typing `=`: > --- a = b --- aa <= bb --- aaa === bbb --- aaaa = cccc --- < --- <,> Besides splitting by "," character, trim whitespace, pair neighboring --- parts and merge with single space. --- --- Before: > --- a,b --- aa,bb --- aaa , bbb --- < --- After typing `,`: > --- a, b --- aa, bb --- aaa, bbb --- < --- <|> Split by "|" character, trim whitespace, merge with single space. --- --- Before: > --- |a|b| --- |aa|bb| --- |aaa | bbb | --- < --- After typing `|`: > --- | a | b | --- | aa | bb | --- | aaa | bbb | --- < --- (Space bar) Squash consecutive whitespace into single space (except --- possible indentation) and split by `%s+` pattern (keeps indentation). --- --- Before: > --- a b c --- aa bb cc --- < --- After typing ``: > --- a b c --- aa bb cc --- < ---@tag MiniAlign-modifiers-builtin --- Copy lines in modifiable buffer, initiate alignment with preview (`gAip`) --- and try typing suggested key sequences. --- These are modified examples taken from `junegunn/vim-easy-align`. --- --- # Equal sign ~ --- --- Lines: > --- --- # This=is=assumed=to be a comment --- "a =" --- a = --- a = 1 --- bbbb = 2 --- ccccccc = 3 --- ccccccccccccccc --- ddd = 4 --- eeee === eee = eee = eee=f --- fff = ggg += gg &&= gg --- g != hhhhhhhh == 888 --- i := 5 --- i %= 5 --- i *= 5 --- j =~ 5 --- j >= 5 --- aa => 123 --- aa <<= 123 --- aa >>= 123 --- bbb => 123 --- c => 1233123 --- d => 123 --- dddddd &&= 123 --- dddddd ||= 123 --- dddddd /= 123 --- gg <=> ee --- < --- Key sequences: --- - `=` --- - `=jc` --- - `=jr` --- - `=m!` --- - `=p` --- - `=i` (execute `:lua vim.o.commentstring = '# %s'` for full experience) --- - `=` --- - `=p` --- - `=fn==1` --- - `=fn==1t` --- - `=frow>7` ---@tag MiniAlign-examples ---@alias __align_with_preview boolean|nil Whether to align with live preview. -- Module definition ========================================================== local MiniAlign = {} local H = {} --- Module setup --- ---@param config table|nil Module config table. See |MiniAlign.config|. --- ---@usage >lua --- require('mini.align').setup() -- use default config --- -- OR --- require('mini.align').setup({}) -- replace {} with your config table --- < MiniAlign.setup = function(config) -- Export module _G.MiniAlign = MiniAlign -- Setup config config = H.setup_config(config) -- Apply config H.apply_config(config) end --- Defaults ~ ---@eval return MiniDoc.afterlines_to_code(MiniDoc.current.eval_section) ---@text # Modifiers ~ --- --- `MiniAlign.config.modifiers` is used to define interactive user experience --- of managing alignment process. It is a table with single character keys and --- modifier function values. --- --- Each modifier function: --- - Is called when corresponding modifier key is pressed. --- - Has signature `(steps, opts)` and should modify any of its input in place. --- --- Examples: --- - Modifier function used for default `i` modifier: >lua --- --- function(steps, _) --- table.insert(steps.pre_split, MiniAlign.gen_step.ignore_split()) --- end --- < --- - Tweak `t` modifier to use highest indentation instead of keeping it: >lua --- --- require('mini.align').setup({ --- modifiers = { --- t = function(steps, _) --- local trim_high = MiniAlign.gen_step.trim('both', 'high') --- table.insert(steps.pre_justify, trim_high) --- end --- } --- }) --- < --- - Tweak `j` modifier to cycle through available "justify_side" option --- values (like in `junegunn/vim-easy-align`): >lua --- --- require('mini.align').setup({ --- modifiers = { --- j = function(_, opts) --- local next_option = ({ --- left = 'center', center = 'right', right = 'none', none = 'left', --- })[opts.justify_side] --- opts.justify_side = next_option or 'left' --- end, --- }, --- }) --- < --- # Options ~ --- --- `MiniAlign.config.options` defines default values of options used to control --- behavior of steps. --- --- Examples: --- - Set `justify_side = 'center'` to center align at initialization. --- --- For more details about options see |MiniAlign.align_strings()| and entries of --- |MiniAlign.gen_step| for default main steps. --- --- # Steps ~ --- --- `MiniAlign.config.steps` defines default steps to be applied during --- alignment process. --- --- Examples: --- - Align by default only first pair of columns: >lua --- --- local align = require('mini.align') --- align.setup({ --- steps = { --- pre_justify = { align.gen_step.filter('n == 1') } --- }, --- }) --- < MiniAlign.config = { -- Module mappings. Use `''` (empty string) to disable one. mappings = { start = 'ga', start_with_preview = 'gA', }, -- Modifiers changing alignment steps and/or options modifiers = { -- Main option modifiers --minidoc_replace_start ['s'] = --, ['s'] = function(_, opts) local input = H.user_input('Enter split Lua pattern') if input == nil then return end opts.split_pattern = input end, --minidoc_replace_end --minidoc_replace_start ['j'] = --, ['j'] = function(_, opts) --stylua: ignore H.echo({ { 'Select justify: ', 'ModeMsg' }, { 'l', 'Question' }, { 'eft, ' }, { 'c', 'Question' }, { 'enter, ' }, { 'r', 'Question' }, { 'ight, ' }, { 'n', 'Question' }, { 'one' } }) local ok, char = pcall(vim.fn.getcharstr) local direction = ({ l = 'left', c = 'center', r = 'right', n = 'none' })[char] if not ok or direction == nil then return end opts.justify_side = direction end, --minidoc_replace_end --minidoc_replace_start ['m'] = --, ['m'] = function(_, opts) local input = H.user_input('Enter merge delimiter') if input == nil then return end opts.merge_delimiter = input end, --minidoc_replace_end -- Modifiers adding pre-steps --minidoc_replace_start ['f'] = --, ['f'] = function(steps, _) local input = H.user_input('Enter filter expression') local step = MiniAlign.gen_step.filter(input) if step == nil then return end table.insert(steps.pre_justify, step) end, --minidoc_replace_end --minidoc_replace_start ['i'] = --, ['i'] = function(steps, _) table.insert(steps.pre_split, MiniAlign.gen_step.ignore_split()) end, --minidoc_replace_end --minidoc_replace_start ['p'] = --, ['p'] = function(steps, _) table.insert(steps.pre_justify, MiniAlign.gen_step.pair()) end, --minidoc_replace_end --minidoc_replace_start ['t'] = --, ['t'] = function(steps, _) table.insert(steps.pre_justify, MiniAlign.gen_step.trim()) end, --minidoc_replace_end -- Delete some last pre-step --minidoc_replace_start [''] = --, [vim.api.nvim_replace_termcodes('', true, true, true)] = function(steps, _) local has_pre = {} for _, pre in ipairs({ 'pre_split', 'pre_justify', 'pre_merge' }) do if #steps[pre] > 0 then table.insert(has_pre, pre) end end if #has_pre == 0 then return end if #has_pre == 1 then local pre = steps[has_pre[1]] table.remove(pre, #pre) return end --stylua: ignore H.echo({ { 'Select pre-step to remove: ', 'ModeMsg' }, { 's', 'Question' }, { 'plit, ' }, { 'j', 'Question' }, { 'ustify, ' }, { 'm', 'Question' }, { 'erge' }, }) local ok, char = pcall(vim.fn.getcharstr) if not ok then return nil end if char == 's' then table.remove(steps.pre_split, #steps.pre_split) end if char == 'j' then table.remove(steps.pre_justify, #steps.pre_justify) end if char == 'm' then table.remove(steps.pre_merge, #steps.pre_merge) end end, --minidoc_replace_end -- Special configurations for common splits --minidoc_replace_start ['='] = --, [','] = function(steps, opts) opts.split_pattern = ',' table.insert(steps.pre_justify, MiniAlign.gen_step.trim()) table.insert(steps.pre_justify, MiniAlign.gen_step.pair()) opts.merge_delimiter = ' ' end, --minidoc_replace_end --minidoc_replace_start ['|'] = --, ['|'] = function(steps, opts) opts.split_pattern = '|' table.insert(steps.pre_justify, MiniAlign.gen_step.trim()) opts.merge_delimiter = ' ' end, --minidoc_replace_end --minidoc_replace_start [' '] = --, [' '] = function(steps, opts) table.insert( steps.pre_split, MiniAlign.new_step('squash', function(strings) -- Replace all space sequences with single space (except indent) for i, s in ipairs(strings) do strings[i] = s:gsub('()(%s+)', function(n, space) return n == 1 and space or ' ' end) end end) ) -- Don't use `' '` to respect indent opts.split_pattern = '%s+' end, --minidoc_replace_end }, -- Default options controlling alignment process options = { split_pattern = '', justify_side = 'left', merge_delimiter = '', }, -- Default steps performing alignment (if `nil`, default is used) steps = { pre_split = {}, split = nil, pre_justify = {}, justify = nil, pre_merge = {}, merge = nil, }, -- Whether to disable showing non-error feedback -- This also affects (purely informational) helper messages shown after -- idle time if user input is required. silent = false, } --minidoc_afterlines_end -- Module functionality ======================================================= --- Align strings --- --- For details about alignment process see |MiniAlign-algorithm|. --- ---@param strings table Array of strings. ---@param opts table|nil Options. Its copy will be passed to steps as second --- argument. Extended with `MiniAlign.config.options`. --- This is a place to control default main steps: --- - `opts.split_pattern` - Lua pattern(s) used to make split parts. --- - `opts.split_exclude_patterns` - which split matches should be ignored. --- - `opts.justify_side` - which direction(s) alignment should be done. --- - `opts.justify_offsets` - offsets tweaking width of first column --- - `opts.merge_delimiter` - which delimiter(s) to use when merging. --- For more information see |MiniAlign.gen_step| entry for corresponding --- default step. ---@param steps table|nil Steps. Extended with `MiniAlign.config.steps`. --- Possible `nil` values are replaced with corresponding default steps: --- - `split` - |MiniAlign.gen_step.default_split()|. --- - `justify` - |MiniAlign.gen_step.default_justify()|. --- - `merge` - |MiniAlign.gen_step.default_merge()|. MiniAlign.align_strings = function(strings, opts, steps) -- Validate arguments if not H.is_array_of(strings, H.is_string) then H.error('First argument of `MiniAlign.align_strings()` should be array of strings.') end opts = H.normalize_opts(opts) steps = H.normalize_steps(steps, 'steps') -- Make a copy so that modification in place doesn't affect input strings = vim.deepcopy(strings) -- Pre split for _, step in ipairs(steps.pre_split) do H.apply_step(step, strings, opts, 'pre_split') end -- Split local parts = H.apply_step(steps.split, strings, opts, 'split') if not H.is_parts(parts) then if H.can_be_parts(parts) then parts = MiniAlign.as_parts(parts) else H.error('Output of `split` step should be convertible to parts. See `:h MiniAlign.as_parts()`.') end end -- Pre justify for _, step in ipairs(steps.pre_justify) do H.apply_step(step, parts, opts, 'pre_justify') end -- Justify H.apply_step(steps.justify, parts, opts, 'justify') -- Pre merge for _, step in ipairs(steps.pre_merge) do H.apply_step(step, parts, opts, 'pre_merge') end -- Merge local new_strings = H.apply_step(steps.merge, parts, opts, 'merge') if not H.is_array_of(new_strings, H.is_string) then H.error('Output of `merge` step should be array of strings.') end return new_strings end --- Align current region with user-supplied steps --- --- Mostly designed to be used inside mappings. --- --- Will use |MiniAlign.align_strings()| and set the following options in `opts`: --- - `justify_offsets` - array of offsets used to achieve actual alignment of --- a region. It is non-trivial (not array of zeros) only for charwise --- selection: offset of first string is computed as width of prefix to the --- left of region start. --- - `region` - current affected region (see |MiniAlign-glossary|). Can be --- used to create more advanced steps. --- - `mode` - mode of selection (see |MiniAlign-glossary|). --- ---@param mode string Selection mode. One of "char", "line", "block". MiniAlign.align_user = function(mode) local modifiers = H.get_config().modifiers local with_preview = H.cache.with_preview local opts = H.cache.opts or H.normalize_opts() local steps = H.cache.steps or H.normalize_steps() local steps_are_from_cache = H.cache.steps ~= nil H.cache.region = nil -- Track if lines were actually changed to properly undo during preview local lines_were_changed = false -- Make initial process lines_were_changed = H.process_current_region(lines_were_changed, mode, opts, steps) -- Make early return: -- - If cache is present (enables dot-repeat). -- - If `split` is not default with no preview (no more information needed). if steps_are_from_cache or (not with_preview and opts.split_pattern ~= '') then return end -- Ask user to input modifier id until no more is needed local n_iter = 0 while true do -- Get modifier from user local id = H.user_modifier(with_preview, H.make_status_msg_chunks(opts, steps)) n_iter = n_iter + 1 -- Stop in case user supplied inappropriate modifier id (abort) -- Also stop in case of too many iterations (guard from infinite cycle) if id == nil or n_iter > 1000 then if lines_were_changed then H.undo() end if n_iter > 1000 then H.echo({ { 'Too many modifiers typed.', 'WarningMsg' } }, true) end break end -- Stop preview after `` (confirmation) if with_preview and id == '\r' then break end -- Apply modifier local mod = modifiers[id] if mod == nil then -- Use supplied identifier as split pattern opts.split_pattern = vim.pesc(id) else -- Modifier should change input `steps` table in place local ok, out = pcall(mod, steps, opts) if not ok then -- Force message to appear for 500ms because it might be overridden by -- helper status message local msg = string.format('Modifier %s should be properly callable. Reason: %s', vim.inspect(id), out) H.echo({ { msg, 'WarningMsg' } }, true) vim.cmd('redraw') vim.uv.sleep(500) end end -- Normalize steps and options while validating their correctness opts = H.normalize_opts(opts) steps = H.normalize_steps(steps, opts) -- Process region while tracking if lines were set at least once local lines_now_changed = H.process_current_region(lines_were_changed, mode, opts, steps) lines_were_changed = lines_were_changed or lines_now_changed -- Stop in "no preview" mode right after `split` is defined if not with_preview and opts.split_pattern ~= '' then break end end -- Remove helper status message (if shown) if H.cache.msg_shown then vim.cmd('mode') end end --- Convert 2d array of strings to parts --- --- This function verifies if input is a proper 2d array of strings and adds --- methods to its copy. --- ---@class parts --- ---@field apply function Takes callable `f` and applies it to every part. --- Callable should have signature `(s, data)`: `s` is a string part, --- `data` - table with its data ( has row number, has column number). --- Returns new 2d array. --- ---@field apply_inplace function Takes callable `f` and applies it to every part. --- Should have same signature as in `apply` method. Outputs (should all be --- strings) are assigned in place to a corresponding parts element. Returns --- parts itself to enable method chaining. --- ---@field get_dims function Return dimensions of parts array: a table with --- and keys having number of rows and number of columns (maximum --- number of elements across all rows). --- ---@field group function Concatenate neighboring strings based on supplied --- boolean mask and direction (one of "left", default, or "right"). Has --- signature `(mask, direction)` and modifies parts in place. Returns parts --- itself to enable method chaining. --- Example: --- - Parts: `{ { "a", "b", "c" }, { "d", "e" }, { "f" } }` --- - Mask: `{ { false, false, true }, { true, false }, { false } }` --- - Result for direction "left": `{ { "abc" }, { "d", "e" }, { "f" } }` --- - Result for direction "right": `{ { "ab","c" }, { "de" }, { "f" } }` --- ---@field pair function Concatenate neighboring element pairs. Takes --- `direction` as input (one of "left", default, or "right") and applies --- `group()` for an alternating mask. --- Example: --- - Parts: `{ { "a", "b", "c" }, { "d", "e" }, { "f" } }` --- - Result for direction "left": `{ { "ab", "c" }, { "de" }, { "f" } }` --- - Result for direction "right": `{ { "a", "bc" }, { "de" }, { "f" } }` --- ---@field slice_col function Return column with input index `j`. Note: it might --- not be an array if rows have unequal number of columns. --- ---@field slice_row function Return row with input index `i`. --- ---@field trim function Trim elements whitespace. Has signature `(direction, indent)` --- and modifies parts in place. Returns parts itself to enable method chaining. --- - Possible values of `direction`: "both" (default), "left", "right", --- "none". Defines from which side whitespaces should be removed. --- - Possible values of `indent`: "keep" (default), "low", "high", "remove". --- Defines what to do with possible indent (left whitespace of first string --- in a row). Value "keep" keeps it; "low" makes all indent equal to the --- lowest across rows; "high" - highest across rows; "remove" - removes indent. --- ---@usage >lua --- parts = MiniAlign.as_parts({ { 'a', 'b' }, { 'c' } }) --- print(vim.inspect(parts.get_dims())) -- Should be { row = 2, col = 2 } --- --- parts.apply_inplace(function(s, data) --- return ' ' .. data.row .. s .. data.col .. ' ' --- end) --- print(vim.inspect(parts)) -- Should be { { ' 1a1 ', ' 1b2 ' }, { ' 2c1 ' } } --- --- parts.trim('both', 'remove').pair() --- print(vim.inspect(parts)) -- Should be { { '1a11b2' }, { '2c1' } } --- < MiniAlign.as_parts = function(arr2d) local ok, msg = H.can_be_parts(arr2d) if not ok then H.error('Input of `as_parts()` ' .. msg) end local parts = vim.deepcopy(arr2d) local methods = {} methods.apply = function(f) local res = {} for i, row in ipairs(parts) do res[i] = {} for j, s in ipairs(row) do res[i][j] = f(s, { row = i, col = j }) end end return res end methods.apply_inplace = function(f) for i, row in ipairs(parts) do for j, s in ipairs(row) do local new_val = f(s, { row = i, col = j }) if type(new_val) ~= 'string' then H.error('Input of `apply_inplace()` method should always return string.') end parts[i][j] = new_val end end return parts end methods.get_dims = function() local n_cols = 0 for _, row in ipairs(parts) do n_cols = math.max(n_cols, #row) end return { row = #parts, col = n_cols } end -- Group cells into single string based on boolean mask. -- Can be used for filtering separators and sticking separator to its part. methods.group = function(mask, direction) direction = direction or 'left' for i, row in ipairs(parts) do local group_tables = H.group_by_mask(row, mask[i], direction) parts[i] = vim.tbl_map(table.concat, group_tables) end return parts end methods.pair = function(direction) direction = direction or 'left' local mask = {} for i, row in ipairs(parts) do mask[i] = {} for j, _ in ipairs(row) do -- Count from corresponding end local num = direction == 'left' and j or (#row - j + 1) mask[i][j] = num % 2 == 0 end end parts.group(mask, direction) return parts end -- NOTE: output might not be an array (some rows can not have input column) -- Use `vim.tbl_keys()` and `vim.tbl_values()` methods.slice_col = function(j) return vim.tbl_map(function(row) return row[j] end, parts) end methods.slice_row = function(i) return parts[i] or {} end methods.trim = function(direction, indent) direction = direction or 'both' indent = indent or 'keep' -- Verify arguments local trim_fun = H.trim_functions[direction] if not vim.is_callable(trim_fun) then local allowed = vim.tbl_map(vim.inspect, vim.tbl_keys(H.trim_functions)) table.sort(allowed) H.error('`direction` should be one of ' .. table.concat(allowed, ', ') .. '.') end local indent_fun = H.indent_functions[indent] if not vim.is_callable(indent_fun) then local allowed = vim.tbl_map(vim.inspect, vim.tbl_keys(H.indent_functions)) table.sort(allowed) H.error('`indent` should be one of ' .. table.concat(allowed, ', ') .. '.') end -- Compute indentation to restore later local row_indent = vim.tbl_map(function(row) return row[1]:match('^(%s*)') end, parts) row_indent = indent_fun(row_indent) -- Trim parts.apply_inplace(trim_fun) -- Restore indentation if it was removed if vim.tbl_contains({ 'both', 'left' }, direction) then for i, row in ipairs(parts) do row[1] = string.format('%s%s', row_indent[i], row[1]) end end return parts end return setmetatable(parts, { class = 'parts', __index = methods }) end --- Create step --- --- A step is basically a named callable object. Having a name bundled with --- some action powers helper status message during interactive alignment process. --- ---@param name string Step name. ---@param action function|table Step action. Should be a callable object --- (see |vim.is_callable()|). --- ---@return table A table with keys: with `name` argument, with `action`. MiniAlign.new_step = function(name, action) if type(name) ~= 'string' then H.error('Step name should be string.') end if not vim.is_callable(action) then H.error('Step action should be callable.') end return { name = name, action = action } end --- Generate common action steps --- --- This is a table with function elements. Call to actually get step. --- --- Each step action is a function that has signature `(object, opts)`, where --- `object` is either parts or array of strings (depends on which stage of --- alignment process it is assumed to be applied) and `opts` is table of options. --- --- Outputs of elements named `default_*` are used as default corresponding main --- step (split, justify, merge). Behavior of all of them depend on values from --- supplied options (second argument). --- --- Outputs of other elements depend on both step generator input values and --- options supplied at execution. This design is mostly because their output --- can be used several times in pre-steps. --- ---@usage >lua --- local align = require('mini.align') --- align.setup({ --- modifiers = { --- -- Use 'T' modifier to remove both whitespace and indent --- T = function(steps, _) --- table.insert(steps.pre_justify, align.gen_step.trim('both', 'remove')) --- end, --- }, --- options = { --- -- By default align "right", "left", "right", "left", ... --- justify_side = { 'right', 'left' }, --- }, --- steps = { --- -- Align by default only first pair of columns --- pre_justify = { align.gen_step.filter('n == 1') }, --- }, --- }) --- < MiniAlign.gen_step = {} --- Generate default split step --- --- Output splits strings using matches of Lua pattern(s) from `split_pattern` --- option which are not dismissed by `split_exclude_patterns` option. --- --- Outline of how single string is split: --- - Convert `split_pattern` option to array of strings (string is converted --- as one-element array). This array will be recycled in case there are more --- split matches than in converted `split_pattern` array (which almost always). --- - Find all forbidden spans (intervals inside string) - all matches of all --- patterns in `split_exclude_patterns`. --- - Find match for the next pattern. If it is not inside any forbidden span, --- add preceding unmatched substring and matched split as two parts. Repeat --- with the next pattern. --- - If no pattern match is found, add the rest of string as final part. --- --- Output uses following options (as part second argument, `opts` table): --- - - string or array of strings used to detect split matches --- and create parts. Default: `''` meaning no matches (whole string is used --- as part). Examples: `'%s+'`, `{ '<', '>' }`. --- - - array of strings defining which regions to --- exclude from being matched. Default: `{}`. Examples: `{ '".-"', '^%s*#.*' }`. --- ---@return table A step named "split" and with appropriate callable action. --- ---@seealso |MiniAlign.gen_step.ignore_split()| heavily uses `split_exclude_patterns`. MiniAlign.gen_step.default_split = function() return MiniAlign.new_step('split', H.default_action_split) end --- Generate default justify step --- --- Output makes column elements of string parts have equal width by adding --- left and/or right whitespace padding. Which side(s) to pad is defined by --- `justify_side` option. Width of first column can be tweaked with `justify_offsets` --- option. --- --- Outline of how parts are justified: --- - Convert `justify_side` option to array of strings (single string is --- converted as one-element array). Recycle this array to have length equal --- to number of columns in parts. --- - For all columns compute maximum width of strings from it (add offsets from --- `justify_offsets` to first column widths). Note: for left alignment, width --- of last row element does not affect column width. This is mainly because --- it won't be padded and helps dealing with "no single match" lines. --- - Make all elements have same width inside column by adding appropriate --- amount of whitespace. Which side(s) to add is controlled by the corresponding --- `justify_side` array element. Note: padding is done with spaces which --- might conflict with tab indentation. --- --- Output uses following options (as part second argument, `opts` table): --- - - string or array of strings. Each element can be one of --- "left" (pad right side), "center" (pad both sides equally), "right" (pad --- left side), "none" (no padding). Default: "left". --- - - array of numeric left offsets of rows. Used to adjust --- for possible not equal indents, like in case of charwise selection when --- left edge is not on the first column. Default: array of zeros. Set --- automatically during interactive alignment in charwise mode. --- ---@return table A step named "justify" and with appropriate callable action. MiniAlign.gen_step.default_justify = function() return MiniAlign.new_step('justify', H.default_action_justify) end --- Generate default merge step --- --- Output merges rows of parts into strings by placing merge delimiter(s) --- between them. --- --- Outline of how parts are converted to array of strings: --- - Convert `merge_delimiter` option to array of strings (single string is --- converted as one-element array). Recycle this array to have length equal --- to number of columns in parts minus 1. Also possibly trim leading whitespace --- in first merge character to not affect indentation. --- - Exclude empty strings from parts. They add nothing to output except extra --- usage of merge delimiter. --- - Concatenate each row interleaving with array of merge delimiters. --- --- Output uses following options (as part second argument, `opts` table): --- - - string or array of strings. Default: `''`. --- Examples: `' '`, `{ '', ' ' }`. --- ---@return table A step named "merge" and with appropriate callable action. MiniAlign.gen_step.default_merge = function() return MiniAlign.new_step('merge', H.default_action_merge) end --- Generate filter step --- --- Construct function predicate from supplied Lua string expression and make --- step evaluating it on every part element. --- --- Outline of how filtering is done: --- - Convert Lua filtering expression into function predicate which can be --- evaluated in manually created context (some specific variables being set). --- - Compute boolean mask for parts by applying predicate to each element of --- 2d array with special variables set to specific values (see next section). --- - Group parts with computed mask. See `group()` method of parts in --- |MiniAlign.as_parts()|. --- --- Special variables which can be used in expression: --- - - row number of current element. --- - - total number of rows in parts. --- - - column number of current element. --- - - total number of columns in current row. --- - - string value of current element. --- - - column pair number of current element. Useful when filtering by --- result of pattern splitting. --- - - total number of column pairs in current row. --- - All variables from global table `_G`. --- --- Tips: --- - This general filtering approach can be used to both include and exclude --- certain parts from alignment. Examples: --- - Use `row ~= 2` to align all parts except from second row. --- - Use `n == 1` to align only by first pair of columns. --- - Filtering by last equal sign usually can be done with `n >= (N - 1)` --- (because there is usually something to the right of it). --- ---@param expr string Lua expression as a string which will be used as predicate. --- ---@return table|nil A step named "filter" and with appropriate callable action. MiniAlign.gen_step.filter = function(expr) local action = H.make_filter_action(expr) if action == nil then return end return MiniAlign.new_step('filter', action) end --- Generate ignore step --- --- Output adds certain values to `split_exclude_patterns` option. Should be --- used as pre-split step. --- ---@param patterns table Array of patterns to be added to --- `split_exclude_patterns` as is. Default: `{ [[".-"]] }` (excludes strings --- for most cases). ---@param exclude_comment boolean|nil Whether to add comment pattern to --- `split_exclude_patterns`. Comment pattern is derived from |'commentstring'| --- option. Default: `true`. --- ---@return table A step named "ignore" and with appropriate callable action. --- ---@seealso |MiniAlign.gen_step.default_split()| for details about --- `split_exclude_patterns` option. MiniAlign.gen_step.ignore_split = function(patterns, exclude_comment) patterns = patterns or { '".-"' } if exclude_comment == nil then exclude_comment = true end -- Validate ingput if not H.is_array_of(patterns, H.is_string) then H.error('Argument `patterns` of `ignore_split()` should be array of strings.') end if type(exclude_comment) ~= 'boolean' then H.error('Argument `exclude_comment` of `ignore_split()` should be boolean.') end -- Make action which modifies `opts.split_exclude_patterns` local action = function(_, opts) local excl = opts.split_exclude_patterns or {} -- Add supplied patterns while avoiding duplication for _, patt in ipairs(patterns) do if not vim.tbl_contains(excl, patt) then table.insert(excl, patt) end end -- Possibly add current comment pattern while avoiding duplication if exclude_comment then -- In 'commentstring', `%s` denotes the comment content local comment_pattern = vim.pesc(vim.o.commentstring):gsub('%%%%s', '.-') -- Ignore to the end of the string if 'commentstring' is like "xxx%s" comment_pattern = comment_pattern:gsub('%.%-%s*$', '.*') if not vim.tbl_contains(excl, comment_pattern) then table.insert(excl, comment_pattern) end end opts.split_exclude_patterns = excl end return MiniAlign.new_step('ignore', action) end --- Generate pair step --- --- Output calls `pair()` method of parts (see |MiniAlign.as_parts()|) with --- supplied `direction` argument. --- ---@param direction string Which direction to pair. One of "left" (default) or ---"right". --- ---@return table A step named "pair" and with appropriate callable action. MiniAlign.gen_step.pair = function(direction) return MiniAlign.new_step('pair', function(parts, _) parts.pair(direction) end) end --- Generate trim step --- --- Output calls `trim()` method of parts (see |MiniAlign.as_parts()|) with --- supplied `direction` and `indent` arguments. --- ---@param direction string|nil Which sides to trim whitespace. One of "both" --- (default), "left", "right", "none". ---@param indent string|nil What to do with possible indent (left whitespace --- of first string in a row). One of "keep" (default), "low", "high", "remove". --- ---@return table A step named "trim" and with appropriate callable action. MiniAlign.gen_step.trim = function(direction, indent) return MiniAlign.new_step('trim', function(parts, _) parts.trim(direction, indent) end) end -- Helper data ================================================================ -- Module default config H.default_config = vim.deepcopy(MiniAlign.config) -- Cache for various operations H.cache = {} -- Module's namespaces H.ns_id = { -- Track user input input = vim.api.nvim_create_namespace('MiniAlignInput'), } -- Pad functions for supported justify directions -- Allow to not add trailing whitespace H.pad_functions = { left = function(x, n_spaces, no_trailing) if no_trailing or H.is_infinite(n_spaces) then return x end return string.format('%s%s', x, string.rep(' ', n_spaces)) end, center = function(x, n_spaces, no_trailing) local n_left = math.floor(0.5 * n_spaces) return H.pad_functions.right(H.pad_functions.left(x, n_left, no_trailing), n_spaces - n_left, no_trailing) end, right = function(x, n_spaces, no_trailing) if (no_trailing and H.is_whitespace(x)) or H.is_infinite(n_spaces) then return x end return string.format('%s%s', string.rep(' ', n_spaces), x) end, none = function(x, _, _) return x end, } -- Trim functions H.trim_functions = { both = function(x) return H.trim_functions.left(H.trim_functions.right(x)) end, left = function(x) return string.gsub(x, '^%s*', '') end, right = function(x) return string.gsub(x, '%s*$', '') end, none = function(x) return x end, } -- Indentation functions H.indent_functions = { keep = function(indent_arr) return indent_arr end, high = function(indent_arr) local max_indent = indent_arr[1] for i = 2, #indent_arr do max_indent = (max_indent:len() < indent_arr[i]:len()) and indent_arr[i] or max_indent end return vim.tbl_map(function() return max_indent end, indent_arr) end, low = function(indent_arr) local min_indent = indent_arr[1] for i = 2, #indent_arr do min_indent = (indent_arr[i]:len() < min_indent:len()) and indent_arr[i] or min_indent end return vim.tbl_map(function() return min_indent end, indent_arr) end, remove = function(indent_arr) return vim.tbl_map(function() return '' end, indent_arr) end, } -- Helper functionality ======================================================= -- Settings ------------------------------------------------------------------- H.setup_config = function(config) H.check_type('config', config, 'table', true) config = vim.tbl_deep_extend('force', vim.deepcopy(H.default_config), config or {}) H.check_type('mappings', config.mappings, 'table') H.check_type('mappings.start', config.mappings.start, 'string') H.check_type('mappings.start_with_preview', config.mappings.start_with_preview, 'string') H.check_type('modifiers', config.modifiers, 'table') for k, v in pairs(config.modifiers) do if not vim.is_callable(v) then H.error(string.format('`modifiers[%s]` should be callable.', vim.inspect(k))) end end H.validate_steps(config.steps, 'steps') H.check_type('options', config.options, 'table') H.check_type('silent', config.silent, 'boolean') return config end --stylua: ignore H.apply_config = function(config) MiniAlign.config = config H.map('n', config.mappings.start, H.make_action_normal(false), { expr = true, desc = 'Align' }) H.map('x', config.mappings.start, H.make_action_visual(false), { desc = 'Align' }) H.map('n', config.mappings.start_with_preview, H.make_action_normal(true), { expr = true, desc = 'Align with preview' }) H.map('x', config.mappings.start_with_preview, H.make_action_visual(true), { desc = 'Align with preview' }) end H.is_disabled = function() return vim.g.minialign_disable == true or vim.b.minialign_disable == true end H.get_config = function() -- Using `tbl_deep_extend()` works even in presence of `steps.pre_*` arrays -- because default ones are empty. return vim.tbl_deep_extend('force', MiniAlign.config, vim.b.minialign_config or {}) end -- Mappings ------------------------------------------------------------------- H.make_action_normal = function(with_preview) return function() if H.is_disabled() then return end H.cache = { with_preview = with_preview } -- Set 'operatorfunc' which will be later called with appropriate marks set vim.o.operatorfunc = 'v:lua.MiniAlign.align_user' return 'g@' end end H.make_action_visual = function(with_preview) return function() if H.is_disabled() then return end H.cache = { with_preview = with_preview } -- Perform action and exit Visual mode local mode = ({ ['v'] = 'char', ['V'] = 'line', ['\22'] = 'block' })[vim.fn.mode(1)] MiniAlign.align_user(mode) vim.cmd('normal! \27') end end -- Work with steps and options ------------------------------------------------ H.is_valid_steps = function(x, x_name) x_name = x_name or 'config.steps' if type(x) ~= 'table' then return false, string.format('`%s` should be table.', x_name) end -- Validators local is_steps_array = function(y) return H.is_array_of(y, H.is_step) end local steps_array_msg = 'should be array of steps (see `:h MiniAlign.new_step()`).' local is_maybe_step = function(y) return y == nil or H.is_step(y) end local step_msg = 'should be step (see `:h MiniAlign.new_step()`).' -- Actual checks if not is_steps_array(x.pre_split) then return false, H.msg_bad_steps(x_name, 'pre_split', steps_array_msg) end if not is_maybe_step(x.split) then return false, H.msg_bad_steps(x_name, 'split', step_msg) end if not is_steps_array(x.pre_justify) then return false, H.msg_bad_steps(x_name, 'pre_justify', steps_array_msg) end if not is_maybe_step(x.justify) then return false, H.msg_bad_steps(x_name, 'justify', step_msg) end if not is_steps_array(x.pre_merge) then return false, H.msg_bad_steps(x_name, 'pre_merge', steps_array_msg) end if not is_maybe_step(x.merge) then return false, H.msg_bad_steps(x_name, 'merge', step_msg) end return true end H.validate_steps = function(x, x_name) local is_valid, msg = H.is_valid_steps(x, x_name) if not is_valid then H.error(msg) end end H.normalize_steps = function(steps, steps_name) -- Infer all defaults from module config -- NOTE: Don't use `tbl_deep_extend` to prefer full input arrays (if present) local res = vim.tbl_extend('force', H.get_config().steps, steps or {}) H.validate_steps(res, steps_name) -- Possibly fill in default main steps res.split = res.split or MiniAlign.gen_step.default_split() res.justify = res.justify or MiniAlign.gen_step.default_justify() res.merge = res.merge or MiniAlign.gen_step.default_merge() -- Deep copy to ensure that table values will not be affected (because if a -- table value is present only in one input, it is taken as is). return vim.deepcopy(res) end H.normalize_opts = function(opts) local res = vim.tbl_deep_extend('force', H.get_config().options, opts or {}) return vim.deepcopy(res) end H.msg_bad_steps = function(steps_name, key, msg) return string.format('`%s.%s` %s', steps_name, key, msg) end H.apply_step = function(step, arr, opts, step_container_name) local arr_name, predicate, suggest = 'parts', H.is_parts, ' See `:h MiniAlign.as_parts()`.' if not H.is_parts(arr) then arr_name = 'strings' predicate = function(x) return H.is_array_of(x, H.is_string) end suggest = '' end local res = step.action(arr, opts) if not predicate(arr) then --stylua: ignore local msg = string.format( 'Step `%s` of `%s` should preserve structure of `%s`.%s', step.name, step_container_name, arr_name, suggest ) H.error(msg) end return res end -- Work with default actions -------------------------------------------------- H.default_action_split = function(string_array, opts) -- Prepare options local pattern = opts.split_pattern if not (H.is_string(pattern) or H.is_array_of(pattern, H.is_string)) then H.error('Option `split_pattern` should be string or array of strings.') end if type(pattern) == 'string' then pattern = { pattern } end local exclude_patterns = opts.split_exclude_patterns or {} if not H.is_array_of(exclude_patterns, H.is_string) then H.error('Option `split_exclude_patterns` should be array of strings.') end local capture_exclude_regions = vim.tbl_map(function(x) local patt = x patt = x:sub(1, 1) == '^' and ('^()' .. patt:sub(2)) or ('()' .. patt) patt = x:sub(-1, -1) == '$' and (patt:sub(1, -2) .. '()$') or (patt .. '()') return patt end, exclude_patterns) local forbidden_spans = {} local add_to_forbidden = function(l, r) table.insert(forbidden_spans, { l, r - 1 }) end local make_forbidden_spans = function(s) forbidden_spans = {} for _, capture_pat in ipairs(capture_exclude_regions) do s:gsub(capture_pat, add_to_forbidden) end return forbidden_spans end -- Make splits excluding matches inside forbidden regions local res = vim.tbl_map( function(s) return H.default_action_split_string(s, pattern, make_forbidden_spans) end, string_array ) return MiniAlign.as_parts(res) end H.default_action_split_string = function(s, pattern_arr, make_forbidden_spans) -- Construct forbidden spans for string local forbidden_spans = make_forbidden_spans(s) -- Split by recycled `pattern_arr` local res = {} local n_total, n_latest_add, n_find = s:len(), 0, 0 local n_pair = 1 while true do local cur_split = H.slice_mod(pattern_arr, n_pair) local sep_left, sep_right = H.string_find(s, cur_split, n_find) if sep_left == nil then -- Avoid adding empty string to non-empty input because it does nothing -- but confuses "don't add trailspace" logic local rest = s:sub(n_latest_add, n_total) if not (rest == '' and #res > 0) then table.insert(res, rest) end break end local is_good = #forbidden_spans == 0 or not H.is_any_point_inside_any_span({ sep_left, sep_right }, forbidden_spans) if is_good then table.insert(res, s:sub(n_latest_add, sep_left - 1)) table.insert(res, s:sub(sep_left, sep_right)) n_latest_add = sep_right + 1 n_pair = n_pair + 1 end if (sep_right + 1) <= n_find then H.error(string.format('Pattern %s can not advance search.', vim.inspect(cur_split))) end n_find = sep_right + 1 end return res end H.default_action_justify = function(parts, opts) -- Prepare options local side = opts.justify_side if not (H.is_justify_side(side) or H.is_array_of(side, H.is_justify_side)) then H.error([[Option `justify_side` should be one of 'left', 'center', 'right', 'none', or array of those.]]) end if type(side) == 'string' then side = { side } end local offsets = opts.justify_offsets or H.tbl_repeat(0, #parts) -- Recycle `justify` array and precompute padding functions local dims = parts.get_dims() local pad_funs, side_arr = {}, {} for j = 1, dims.col do local s = H.slice_mod(side, j) side_arr[j] = s pad_funs[j] = H.pad_functions[s] end -- Compute cell width and maximum column widths (adjusting for offsets) local width_col = {} for j = 1, dims.col do width_col[j] = 0 end local width = {} for i, row in ipairs(parts) do width[i] = {} for j, s in ipairs(row) do local w = vim.fn.strdisplaywidth(s) width[i][j] = w -- Compute offset local off = j == 1 and offsets[i] or 0 -- Don't use last column in row to compute column width in case of left -- justification (it won't be padded so shouldn't contribute to column) if not (j == #row and side_arr[j] == 'left') then width_col[j] = math.max(off + w, width_col[j]) end end end -- Pad cells to have same width across columns (adjusting for offsets) for i, row in ipairs(parts) do for j, s in ipairs(row) do local off = j == 1 and offsets[i] or 0 local n_space = width_col[j] - width[i][j] - off -- Don't add trailing whitespace for last column parts[i][j] = pad_funs[j](s, n_space, j == #row) end end end H.default_action_merge = function(parts, opts) -- Prepare options local delimiter = opts.merge_delimiter if not (H.is_string(delimiter) or H.is_array_of(delimiter, H.is_string)) then H.error('Option `merge_delimiter` should be string or array of strings.') end if type(delimiter) == 'string' then delimiter = { delimiter } end -- Precompute combination strings (recycle `merge` array) local dims = parts.get_dims() local delim_arr = {} for j = 1, dims.col - 1 do delim_arr[j] = H.slice_mod(delimiter, j) end -- Do not change indentation local first_parts_are_indent = true for i = 1, dims.row do first_parts_are_indent = first_parts_are_indent and H.is_whitespace(parts[i][1]) end delim_arr[1] = (first_parts_are_indent and delim_arr[1] ~= nil) and delim_arr[1]:gsub('^%s*', '') or delim_arr[1] return vim.tbl_map(function(row) return H.concat_array(row, delim_arr) end, parts) end -- Work with modifiers -------------------------------------------------------- H.make_filter_action = function(expr) if expr == nil then return nil end if expr == '' then expr = 'true' end local is_loaded, f = pcall(function() return assert(loadstring('return ' .. expr)) end) if not (is_loaded and vim.is_callable(f)) then H.error(vim.inspect(expr) .. ' is not a valid filter expression.') end local predicate = function(data) local context = setmetatable(data, { __index = _G }) debug.setfenv(f, context) return f() end return function(parts, _) local mask = {} local data = { ROW = #parts } for i, row in ipairs(parts) do data.row = i mask[i] = {} for j, s in ipairs(row) do data.col, data.COL = j, #row data.s = s -- Current and total number of pairs data.n = math.ceil(0.5 * j) data.N = math.ceil(0.5 * #row) mask[i][j] = predicate(data) end end parts.group(mask) end end -- Work with regions ---------------------------------------------------------- ---@return boolean Whether some lines were actually set. ---@private H.process_current_region = function(lines_were_changed, mode, opts, steps) -- Cache current options and steps for dot-repeat H.cache.opts, H.cache.steps = opts, steps -- Undo previously set lines if lines_were_changed then H.undo() end -- Get current region. NOTE: use cached value to ensure that the same region -- is processed during preview. Otherwise there might be problems with -- getting "current" regions in Normal mode as necessary marks (`[` and `]`) -- can be not valid. local region = H.cache.region or H.get_current_region() H.cache.region = region -- Enrich options opts.region = region opts.mode = mode opts.justify_offsets = H.tbl_repeat(0, region.to.line - region.from.line + 1) if mode == 'char' then -- Compute offset of first line for charwise selection local prefix = vim.fn.getline(region.from.line):sub(1, region.from.col - 1) opts.justify_offsets[1] = vim.fn.strdisplaywidth(prefix) end -- Actually process region local strings = H.region_get_text(region, mode) local strings_aligned = MiniAlign.align_strings(strings, opts, steps) H.region_set_text(region, mode, strings_aligned) -- Make sure that latest changes are shown vim.cmd('redraw') -- Confirm that lines were actually set return table.concat(strings) ~= table.concat(strings_aligned) end H.get_current_region = function() local from_expr, to_expr = "'[", "']" if H.is_visual_mode() then from_expr, to_expr = '.', 'v' end -- Add offset (*_pos[4]) to allow position go past end of line local from_pos = vim.fn.getpos(from_expr) local from = { line = from_pos[2], col = from_pos[3] + from_pos[4] } local to_pos = vim.fn.getpos(to_expr) local to = { line = to_pos[2], col = to_pos[3] + to_pos[4] } -- Ensure correct order if to.line < from.line or (to.line == from.line and to.col < from.col) then from, to = to, from end return { from = from, to = to } end H.region_get_text = function(region, mode) local from, to = region.from, region.to if mode == 'char' then local to_col_offset = vim.o.selection == 'exclusive' and 1 or 0 return H.get_text(from.line - 1, from.col - 1, to.line - 1, to.col - to_col_offset) end if mode == 'line' then return H.get_lines(from.line - 1, to.line) end if mode == 'block' then -- Use virtual columns to respect multibyte/wide/composing characters local left_virtcol, right_virtcol = H.region_virtcols(region) local res, lines = {}, H.get_lines(from.line - 1, to.line) for i, l in ipairs(lines) do local lnum = from.line + i - 1 local left_col = vim.fn.virtcol2col(0, lnum, left_virtcol) local right_col = vim.fn.virtcol2col(0, lnum, right_virtcol) right_col = right_col + H.str_utf_end(l, right_col) table.insert(res, l:sub(left_col, right_col)) end return res end end H.region_set_text = function(region, mode, text) local from, to = region.from, region.to if mode == 'char' then -- Ensure not going past last column (can happen with `$` in Visual mode) local to_line_n_cols = vim.fn.col({ to.line, '$' }) - 1 local to_col = math.min(to.col, to_line_n_cols) local to_col_offset = vim.o.selection == 'exclusive' and 1 or 0 H.set_text(from.line - 1, from.col - 1, to.line - 1, to_col - to_col_offset, text) end if mode == 'line' then H.set_lines(from.line - 1, to.line, text) end if mode == 'block' then if #text ~= (to.line - from.line + 1) then H.error('Number of replacement lines should fit the region in blockwise mode') end -- Use virtual columns to respect multibyte characters local left_virtcol, right_virtcol = H.region_virtcols(region) local lines = H.get_lines(from.line - 1, to.line) for i, l in ipairs(lines) do local lnum = from.line + i - 1 local left_col = vim.fn.virtcol2col(0, lnum, left_virtcol) local right_col = vim.fn.virtcol2col(0, lnum, right_virtcol) right_col = right_col + H.str_utf_end(l, right_col) -- Adjust columns to not go outside of line left_col, right_col = math.max(left_col - 1, 0), math.min(right_col, l:len()) H.set_text(lnum - 1, left_col, lnum - 1, right_col, { text[i] }) end end end H.region_virtcols = function(region) -- Account for multibyte characters and position past the line end local from_virtcol = H.pos_to_virtcol(region.from) local to_virtcol = H.pos_to_virtcol(region.to) local left_virtcol, right_virtcol = math.min(from_virtcol, to_virtcol), math.max(from_virtcol, to_virtcol) right_virtcol = right_virtcol - (vim.o.selection == 'exclusive' and 1 or 0) return left_virtcol, right_virtcol end H.pos_to_virtcol = function(pos) -- Account for position past line end local eol_col = vim.fn.col({ pos.line, '$' }) if eol_col < pos.col then return vim.fn.virtcol({ pos.line, '$' }) + pos.col - eol_col end return vim.fn.virtcol({ pos.line, pos.col }) end -- Work with user interaction ------------------------------------------------- H.user_modifier = function(with_preview, msg_chunks) -- Get from user single character modifier local needs_show_state = true local delay = (H.cache.msg_shown or with_preview) and 0 or 1000 vim.defer_fn(function() if not needs_show_state then return end table.insert(msg_chunks, { ' Press modifier' }) H.echo(msg_chunks) H.cache.msg_shown = true end, delay) local ok, char = pcall(vim.fn.getcharstr) needs_show_state = false -- Terminate if couldn't get input (like with ) or on `` if not ok or char == '' or char == '\3' or char == '\27' then return nil end return char end H.user_input = function(prompt, text) prompt = '(mini.align) ' .. prompt if _G.MiniInput ~= nil then return MiniInput.get({ prompt = prompt, scope = 'editor', init_keys = { text } }) end -- Use `on_key` to distinguish cancel with `` and immediate `` local was_cancelled = false vim.on_key(function(key) was_cancelled = was_cancelled or key == '\27' end, H.ns_id.input) -- Ask for input. Use `pcall` to allow `` to cancel user input vim.cmd('echohl Question') local ok, res = pcall(vim.fn.input, { prompt = prompt .. ': ', default = text or '' }) vim.cmd('echohl None | echo "" | redraw') vim.on_key(nil, H.ns_id.input) return (ok and not was_cancelled) and res or nil end H.make_status_msg_chunks = function(opts, steps) local single_to_string = function(pre_steps, opts_value) local steps_str = '' if #pre_steps > 0 then local pre_names = vim.tbl_map(function(x) return x.name end, pre_steps) steps_str = string.format('(%s) ', table.concat(pre_names, ', ')) end return steps_str .. vim.inspect(opts_value) end return { { 'Split: ', 'ModeMsg' }, { single_to_string(steps.pre_split, opts.split_pattern) }, { ' | ', 'Question' }, { 'Justify: ', 'ModeMsg' }, { single_to_string(steps.pre_justify, opts.justify_side) }, { ' | ', 'Question' }, { 'Merge: ', 'ModeMsg' }, { single_to_string(steps.pre_merge, opts.merge_delimiter) }, { ' |', 'Question' }, } end -- Predicates ----------------------------------------------------------------- H.is_array_of = function(x, predicate) if not vim.islist(x) then return false end for _, v in ipairs(x) do if not predicate(v) then return false end end return true end H.is_step = function(x) return type(x) == 'table' and type(x.name) == 'string' and vim.is_callable(x.action) end H.is_string = function(v) return type(v) == 'string' end H.is_justify_side = function(x) return x == 'left' or x == 'center' or x == 'right' or x == 'none' end H.is_parts = function(x) return H.can_be_parts(x) and (getmetatable(x) or {}).class == 'parts' end H.can_be_parts = function(x) if type(x) ~= 'table' then return false, 'should be table' end for i = 1, #x do if not H.is_array_of(x[i], H.is_string) then return false, 'values should be an array of strings' end end return true end H.is_infinite = function(x) return x == math.huge or x == -math.huge end H.is_visual_mode = function() return vim.tbl_contains({ 'v', 'V', '\22' }, vim.fn.mode(1)) end H.is_whitespace = function(x) return type(x) == 'string' and x:find('^%s*$') ~= nil end -- Work with get/set text ----------------------------------------------------- H.get_text = function(start_row, start_col, end_row, end_col) return vim.api.nvim_buf_get_text(0, start_row, start_col, end_row, end_col, {}) end H.get_lines = function(start_row, end_row) return vim.api.nvim_buf_get_lines(0, start_row, end_row, true) end --- Set text in current buffer without affecting marks ---@private H.set_text = function(start_row, start_col, end_row, end_col, replacement) --stylua: ignore local cmd = string.format( 'lockmarks lua vim.api.nvim_buf_set_text(0, %d, %d, %d, %d, %s)', start_row, start_col, end_row, end_col, vim.inspect(replacement) ) vim.cmd(cmd) end --- Set lines in current buffer without affecting marks ---@private H.set_lines = function(start_row, end_row, replacement) --stylua: ignore local cmd = string.format( 'lockmarks lua vim.api.nvim_buf_set_lines(0, %d, %d, true, %s)', start_row, end_row, vim.inspect(replacement) ) vim.cmd(cmd) end -- Utilities ------------------------------------------------------------------ H.error = function(msg) error('(mini.align) ' .. msg, 0) end H.check_type = function(name, val, ref, allow_nil) if type(val) == ref or (ref == 'callable' and vim.is_callable(val)) or (allow_nil and val == nil) then return end H.error(string.format('`%s` should be %s, not %s', name, ref, type(val))) end H.echo = function(msg, add_to_history) if H.get_config().silent then return end -- Construct message chunks msg = type(msg) == 'string' and { { msg } } or msg table.insert(msg, 1, { '(mini.align) ', 'WarningMsg' }) -- Avoid hit-enter-prompt local max_width = vim.o.columns * math.max(vim.o.cmdheight - 1, 0) + vim.v.echospace local chunks, tot_width = {}, 0 for _, ch in ipairs(msg) do local new_ch = { vim.fn.strcharpart(ch[1], 0, max_width - tot_width), ch[2] } table.insert(chunks, new_ch) tot_width = tot_width + vim.fn.strdisplaywidth(new_ch[1]) if tot_width >= max_width then break end end -- Echo. Force redraw to ensure that it is effective (`:h echo-redraw`) vim.cmd([[echo '' | redraw]]) vim.api.nvim_echo(chunks, add_to_history, {}) end H.map = function(mode, lhs, rhs, opts) if lhs == '' then return end opts = vim.tbl_deep_extend('force', { silent = true }, opts or {}) vim.keymap.set(mode, lhs, rhs, opts) end H.slice_mod = function(x, i) return x[((i - 1) % #x) + 1] end H.tbl_repeat = function(val, n) local res = {} for i = 1, n do res[i] = val end return res end H.group_by_mask = function(arr, mask, direction) local res, cur_group = {}, {} -- Construct actors based on direction local from, to, by = 1, #arr, 1 local insert = function(t, v) table.insert(t, v) end if direction == 'right' then from, to, by = to, from, -1 insert = function(t, v) table.insert(t, 1, v) end end -- Group for i = from, to, by do insert(cur_group, arr[i]) if mask[i] or i == to then insert(res, cur_group) cur_group = {} end end return res end H.concat_array = function(target_arr, concat_arr) local ext_arr = {} for i = 1, #target_arr - 1 do -- Concat non-empty cells (empty cells at this point add only extra merge) if target_arr[i] ~= '' then table.insert(ext_arr, target_arr[i]) table.insert(ext_arr, concat_arr[i]) end end table.insert(ext_arr, target_arr[#target_arr]) return table.concat(ext_arr, '') end H.string_find = function(s, pattern, init) init = init or 1 -- Match only start of full string if pattern says so. -- This is needed because `string.find()` doesn't do this. -- Example: `string.find('(aaa)', '^.*$', 4)` returns `4, 5` if pattern:sub(1, 1) == '^' and init > 1 then return nil end -- Treat `''` as if nothing is found (treats it as "reset split"). If not -- altered, results in infinite loop. if pattern == '' then return nil end return string.find(s, pattern, init) end H.str_utfindex = function(s, i) return vim.str_utfindex(s, 'utf-32', i) end if vim.fn.has('nvim-0.11') == 0 then H.str_utfindex = function(s, i) return (vim.str_utfindex(s, i)) end end H.str_utf_end = function(s, n) return n >= s:len() and 0 or vim.str_utf_end(s, n) end H.is_any_point_inside_any_span = function(points, spans) for _, point in ipairs(points) do for _, span in ipairs(spans) do if span[1] <= point and point <= span[2] then return true end end end return false end H.undo = function() if H.is_visual_mode() then -- Can't use `u` in Visual mode because it makes all selection lowercase local cur_mode = vim.fn.mode(1) vim.cmd('silent! normal! \27') -- Undo vim.cmd('silent! lockmarks undo') -- Manually restore selection. There are issues with using restoring marks -- via `gv` (couldn't figure out how to reliably preserve visual mode). -- As this is called only if lines were set, region is cached. local region = H.cache.region vim.api.nvim_win_set_cursor(0, { region.from.line, region.from.col - 1 }) vim.cmd('silent! normal!' .. cur_mode) vim.api.nvim_win_set_cursor(0, { region.to.line, region.to.col - 1 }) else vim.cmd('silent! lockmarks normal! u') end end return MiniAlign