Something went wrong. Try again.
A downstream fork of Tranquil PDS for use in margin.cafe margin.cafe
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902[server]# Public hostname of the PDS, such as `pds.example.com`.## Can also be specified via environment variable `PDS_HOSTNAME`.## Required! This value must be specified.#hostname =
# Address to bind the HTTP server to.## Can also be specified via environment variable `SERVER_HOST`.## Default value: "[::1]"#host = "[::1]"
# Port to bind the HTTP server to.## Can also be specified via environment variable `SERVER_PORT`.## Default value: 3000#port = 3000
# List of domains for user handles.# Defaults to the PDS hostname when not set.## Can also be specified via environment variable `PDS_USER_HANDLE_DOMAINS`.#user_handle_domains =
# Enable PDS-hosted did:web identities. Hosting did:web requires a# long-term commitment to serve DID documents; opt-in only.## Can also be specified via environment variable `ENABLE_PDS_HOSTED_DID_WEB`.## Default value: false#enable_pds_hosted_did_web = false
# The caddy on-demand TLS requires we serve# the endpoint `/.well-known/caddy/ask`.# It will be used so that caddy can create TLS# certs for us on the fly# and we don't have to do annoying wildcard certs.## Can also be specified via environment variable `ENABLE_CADDY_ON_DEMAND_TLS`.## Default value: true#enable_caddy_on_demand_tls = true
# iykyk!## Can also be specified via environment variable `RFC_MOO_COMPLIANCE`.## Default value: false#rfc_moo_compliance = false
# When set to true, skip age-assurance birthday prompt for all accounts.## Can also be specified via environment variable `PDS_AGE_ASSURANCE_OVERRIDE`.## Default value: false#age_assurance_override = false
# Require an invite code for new account registration.## Can also be specified via environment variable `INVITE_CODE_REQUIRED`.## Default value: true#invite_code_required = true
# Allow HTTP (non-TLS) proxy requests. Only useful during development.## Can also be specified via environment variable `ALLOW_HTTP_PROXY`.## Default value: false#allow_http_proxy = false
# Disable all rate limiting. Should only be used in testing.## Can also be specified via environment variable `DISABLE_RATE_LIMITING`.## Default value: false#disable_rate_limiting = false
# Client IP addresses that bypass all rate limits.## Can also be specified via environment variable `PDS_RATE_LIMIT_BYPASS_IPS`.#rate_limit_bypass_ips =
# Optional value accepted in the `x-ratelimit-bypass` request header.# The value must not be empty.## Can also be specified via environment variable `PDS_RATE_LIMIT_BYPASS_KEY`.#rate_limit_bypass_key =
# Allow outbound fetches to private network addresses. Useful for local development using docker compose.## Can also be specified via environment variable `ALLOW_PRIVATE_FETCH`.## Default value: false#allow_private_fetch = false
# Skip the verified-comms-channel gate for login and record writes.# Please keep this off unless you're an invite-only PDS!## Can also be specified via environment variable `DISABLE_ACCOUNT_VERIFICATION_GATE`.## Default value: false#disable_account_verification_gate = false
# List of additional banned words for handle validation.## Can also be specified via environment variable `PDS_BANNED_WORDS`.#banned_words =
# Reserve Tranquil's built-in list of common and notable account names.# Protocol-specific names such as `xrpc` remain reserved when this is false.## Can also be specified via environment variable `PDS_USE_DEFAULT_RESERVED_HANDLES`.## Default value: true#use_default_reserved_handles = true
# List of additional account names to reserve on this PDS.## Can also be specified via environment variable `PDS_RESERVED_HANDLES`.#reserved_handles =
# URL to a privacy policy page.## Can also be specified via environment variable `PRIVACY_POLICY_URL`.#privacy_policy_url =
# URL to terms of service page.## Can also be specified via environment variable `TERMS_OF_SERVICE_URL`.#terms_of_service_url =
# Operator contact email address.## Can also be specified via environment variable `CONTACT_EMAIL`.#contact_email =
# Maximum allowed blob size in bytes (default 10 GiB).## Can also be specified via environment variable `MAX_BLOB_SIZE`.## Default value: 10737418240#max_blob_size = 10737418240
# Maximum allowed number of preferences## Can also be specified via environment variable `MAX_PREFERENCES_COUNT`.## Default value: 1000#max_preferences_count = 1000
# If you're not altering TLS config, you don't have to worry about this.# This is the number of trusted reverse proxies in front of Tranquil.# We read the client IP used for rate limiting and device records this many hops# from the right of the X-Forwarded-For header.# When left unset, Tranquil will assume:# - 0, if the TLS termination is happening here on Tranquil via the TLS config# - 1, if the TLS termination *isn't* happening here.## Set this to 2 when a CDN such as Cloudflare sits in front of nginx, Caddy,# Traefik, or another trusted ingress proxy. Configure each proxy to accept# forwarded headers only from its trusted upstream networks.## Can also be specified via environment variable `TRUSTED_PROXY_COUNT`.#trusted_proxy_count =
[server.tls]# The path to the TLS cert chain.# If you set both this and `key_path`, the server terminates TLS itself rather than expecting# a reverse proxy to do it. The certificate and key reload on SIGHUP.## Can also be specified via environment variable `TLS_CERT_PATH`.#cert_path =
# Path to the TLS private key.## Can also be specified via environment variable `TLS_KEY_PATH`.#key_path =
# Serve HTTP/3 over QUIC on the same UDP port as the TCP listener.# Requires cert_path and key_path.## Can also be specified via environment variable `TLS_HTTP3`.## Default value: false#http3 = false
[frontend]# Whether to enable the built in serving of the frontend.## Can also be specified via environment variable `FRONTEND_ENABLED`.## Default value: true#enabled = true
# Directory to serve as the frontend. The oauth_client_metadata.json will have any references to# the frontend hostname replaced by the configured frontend hostname.## Can also be specified via environment variable `FRONTEND_DIR`.## Default value: "/var/lib/tranquil-pds/frontend"#dir = "/var/lib/tranquil-pds/frontend"
[database]# PostgreSQL connection URL. When PgBouncer support is enabled, point this at# the transaction-pooled PgBouncer service.## Can also be specified via environment variable `DATABASE_URL`.## Required! This value must be specified.#url =
# Direct PostgreSQL connection URL used only for startup migrations and the# firehose LISTEN connection. Required when PgBouncer support is enabled.# Normal application queries do not use this URL.## Can also be specified via environment variable `DATABASE_DIRECT_URL`.#direct_url =
# Enable compatibility with PgBouncer transaction pooling. This disables# SQLx's per-connection prepared-statement cache on the normal query pool and# routes session-bound operations through direct_url.## Can also be specified via environment variable `DATABASE_PGBOUNCER`.## Default value: false#pgbouncer = false
# Maximum number of connections in the pool.## Can also be specified via environment variable `DATABASE_MAX_CONNECTIONS`.## Default value: 100#max_connections = 100
# Minimum number of idle connections kept in the pool.## Can also be specified via environment variable `DATABASE_MIN_CONNECTIONS`.## Default value: 10#min_connections = 10
# Timeout in seconds when acquiring a connection from the pool.## Can also be specified via environment variable `DATABASE_ACQUIRE_TIMEOUT_SECS`.## Default value: 10#acquire_timeout_secs = 10
[secrets]# Secret used for signing JWTs. Must be at least 32 characters in# production.## Can also be specified via environment variable `JWT_SECRET`.#jwt_secret =
# Secret used for DPoP proof validation. Must be at least 32 characters# in production.## Can also be specified via environment variable `DPOP_SECRET`.#dpop_secret =
# Master key used for key-encryption and HKDF derivation. Must be at# least 32 characters in production.## Can also be specified via environment variable `MASTER_KEY`.#master_key =
# Optional operator-held PLC recovery key, as a public `did:key`. The PDS# continues to sign PLC operations with the per-account signing key, which# always remains in `rotationKeys`.## Can also be specified via environment variable `PLC_ROTATION_KEY`.#plc_rotation_key =
# Allow insecure/test secrets. NEVER enable in production.## Can also be specified via environment variable `TRANQUIL_PDS_ALLOW_INSECURE_SECRETS`.## Default value: false#allow_insecure = false
[storage]# Storage backend: `filesystem` or `s3`.# If you set `s3` you must also provide `AWS_ACCESS_KEY_ID` and `AWS_SECRET_ACCESS_KEY`.## Can also be specified via environment variable `BLOB_STORAGE_BACKEND`.## Default value: "filesystem"#backend = "filesystem"
# Path on disk for the filesystem blob backend.## Can also be specified via environment variable `BLOB_STORAGE_PATH`.## Default value: "/var/lib/tranquil-pds/blobs"#path = "/var/lib/tranquil-pds/blobs"
# S3 bucket name for blob storage.## Can also be specified via environment variable `S3_BUCKET`.#s3_bucket =
# Custom S3 endpoint URL.## Can also be specified via environment variable `S3_ENDPOINT`.#s3_endpoint =
# Path on the storage for the S3 blob backend.## Can also be specified via environment variable `S3_PATH`.## Default value: ""#s3_path = ""
# Repository backend: `postgres` by default, or `tranquil-store`, our embedded db.# `tranquil-store` is our own solution, not a tried-and-tested out-of-box database. If you're not feeling brave, don't choose this.## Can also be specified via environment variable `REPO_BACKEND`.## Default value: "postgres"#repo_backend = "postgres"
[tranquil_store]# Directory for tranquil-store data: the metastore, eventlog, and blockstore.## Can also be specified via environment variable `TRANQUIL_STORE_DATA_DIR`.## Default value: "/var/lib/tranquil-pds/store"#data_dir = "/var/lib/tranquil-pds/store"
# Fjall block cache size in megabytes. Defaults to 20% of system RAM when unset.## Can also be specified via environment variable `TRANQUIL_STORE_MEMORY_BUDGET_MB`.#memory_budget_mb =
# Number of handler threads. Defaults to available_parallelism / 2.## Can also be specified via environment variable `TRANQUIL_STORE_HANDLER_THREADS`.#handler_threads =
# Maximum total bytes of pending (unsynced) eventlog payloads. Appenders block# once this budget is exhausted until in-flight events drain via fsync. Set to# 0 to disable backpressure. Default: 1 GiB.## Can also be specified via environment variable `TRANQUIL_STORE_EVENTLOG_PENDING_BYTES_BUDGET`.## Default value: 1073741824#eventlog_pending_bytes_budget = 1073741824
# Maximum size of an individual eventlog payload in bytes. Single events# larger than this are rejected at append time. Default: 256 MiB.## Can also be specified via environment variable `TRANQUIL_STORE_EVENTLOG_MAX_EVENT_PAYLOAD`.## Default value: 268435456#eventlog_max_event_payload = 268435456
# Maximum size of an individual blockstore data file in bytes. When the# active data file reaches this size it is rolled over and becomes# eligible for compaction. Default: 256 MiB.## Can also be specified via environment variable `TRANQUIL_STORE_MAX_BLOCKSTORE_FILE_SIZE`.## Default value: 268435456#max_blockstore_file_size = 268435456
# Maximum size of an individual eventlog segment file in bytes. When the# active segment reaches this size it is sealed and a new one is created.# Safe to change on a running instance. Default: 256 MiB.## Can also be specified via environment variable `TRANQUIL_STORE_MAX_EVENTLOG_SEGMENT_SIZE`.## Default value: 268435456#max_eventlog_segment_size = 268435456
[cache]# Cache backend: `ripple` by default, or `valkey`.## Can also be specified via environment variable `CACHE_BACKEND`.## Default value: "ripple"#backend = "ripple"
# Valkey / Redis connection URL. Required when `backend = "valkey"`.## Can also be specified via environment variable `VALKEY_URL`.#valkey_url =
[cache.ripple]# Address to bind the Ripple gossip protocol listener. With the default# value and no cluster_key or peers configured, the listener binds# loopback instead and runs as a single node.## Can also be specified via environment variable `RIPPLE_BIND`.## Default value: "0.0.0.0:0"#bind_addr = "0.0.0.0:0"
# List of seed peer addresses.## Can also be specified via environment variable `RIPPLE_PEERS`.#peers =
# Unique machine identifier. Auto-derived from hostname when not set.## Can also be specified via environment variable `RIPPLE_MACHINE_ID`.#machine_id =
# Gossip protocol interval in milliseconds.## Can also be specified via environment variable `RIPPLE_GOSSIP_INTERVAL_MS`.## Default value: 200#gossip_interval_ms = 200
# Maximum cache size in megabytes.## Can also be specified via environment variable `RIPPLE_CACHE_MAX_MB`.## Default value: 256#cache_max_mb = 256
# Pre-shared cluster key authenticating ripple peers. Every node in the# cluster must set the same value. When unset, peers are unauthenticated.## Can also be specified via environment variable `RIPPLE_CLUSTER_KEY`.#cluster_key =
# Allow ripple to bind a non-loopback address without a cluster key.# Peers will be unauthenticated. Intended for trusted private networks.## Can also be specified via environment variable `RIPPLE_ALLOW_INSECURE`.## Default value: false#allow_insecure = false
[plc]# Base URL of the PLC directory.## Can also be specified via environment variable `PLC_DIRECTORY_URL`.## Default value: "https://plc.directory"#directory_url = "https://plc.directory"
# HTTP request timeout in seconds.## Can also be specified via environment variable `PLC_TIMEOUT_SECS`.## Default value: 10#timeout_secs = 10
# TCP connect timeout in seconds.## Can also be specified via environment variable `PLC_CONNECT_TIMEOUT_SECS`.## Default value: 5#connect_timeout_secs = 5
# Seconds to cache DID documents.## Can also be specified via environment variable `DID_CACHE_TTL_SECS`.## Default value: 300#did_cache_ttl_secs = 300
# Maximum number of entries retained by each in-memory DID cache.# Set to zero to disable DID caching.## Can also be specified via environment variable `DID_CACHE_MAX_ENTRIES`.## Default value: 10000#did_cache_max_entries = 10000
[firehose]# Size of the in-memory broadcast buffer for firehose events.## Can also be specified via environment variable `FIREHOSE_BUFFER_SIZE`.## Default value: 10000#buffer_size = 10000
# How many hours of historical events to replay for cursor-based# firehose connections.## Can also be specified via environment variable `FIREHOSE_BACKFILL_HOURS`.## Default value: 72#backfill_hours = 72
# Maximum concurrent full-repo exports, eg. getRepo without `since`.## Can also be specified via environment variable `MAX_CONCURRENT_REPO_EXPORTS`.## Default value: 4#max_concurrent_repo_exports = 4
# List of relay / crawler notification URLs.## Can also be specified via environment variable `CRAWLERS`.## Default value: ["https://relay.fire.hose.cam", "https://relay3.fr.hose.cam", "https://bsky.network", "https://northamerica.firehose.network", "https://europe.firehose.network", "https://asia.firehose.network", "https://atproto.africa", "https://relay.upcloud.world"]#crawlers = ["https://relay.fire.hose.cam", "https://relay3.fr.hose.cam", "https://bsky.network", "https://northamerica.firehose.network", "https://europe.firehose.network", "https://asia.firehose.network", "https://atproto.africa", "https://relay.upcloud.world"]
[email]# Sender email address. When unset, email sending is disabled.## Can also be specified via environment variable `MAIL_FROM_ADDRESS`.#from_address =
# Display name used in the `From` header.## Can also be specified via environment variable `MAIL_FROM_NAME`.## Default value: "Tranquil PDS"#from_name = "Tranquil PDS"
# HELO/EHLO name announced to remote SMTP servers. Applies to both# smarthost and direct-MX modes. Defaults to the server hostname.## Can also be specified via environment variable `MAIL_HELO_NAME`.#helo_name =
[email.smarthost]# SMTP relay host. When set, mail is delivered through this host# instead of resolving recipient MX records directly.## Can also be specified via environment variable `MAIL_SMARTHOST_HOST`.#host =
# SMTP relay port.## Can also be specified via environment variable `MAIL_SMARTHOST_PORT`.## Default value: 587#port = 587
# SMTP authentication username.## Can also be specified via environment variable `MAIL_SMARTHOST_USERNAME`.#username =
# SMTP authentication password.## Can also be specified via environment variable `MAIL_SMARTHOST_PASSWORD`.#password =
# TLS mode. Valid values: "implicit", "starttls", "none". Setting "none"# alongside a password is rejected at startup to prevent transmitting# credentials in plaintext.## Can also be specified via environment variable `MAIL_SMARTHOST_TLS`.## Default value: "starttls"#tls = "starttls"
# Max size of the connection pool.## Can also be specified via environment variable `MAIL_SMARTHOST_POOL_SIZE`.## Default value: 4#pool_size = 4
# Per-command SMTP timeout in seconds. Bounds the security handshake.## Can also be specified via environment variable `MAIL_SMARTHOST_COMMAND_TIMEOUT_SECS`.## Default value: 30#command_timeout_secs = 30
# Total per-message timeout in seconds. Wraps the entire send so a# stuck relay cannot stall the comms queue.## Can also be specified via environment variable `MAIL_SMARTHOST_TOTAL_TIMEOUT_SECS`.## Default value: 60#total_timeout_secs = 60
# Apply Atmos/Comail.at categories for headers to be categorized appropriately.## Can also be specified via environment variable `MAIL_APPLY_ATMOS_CATEGORIES`.## Default value: false#apply_atmos_categories = false
[email.direct_mx]# Per-command SMTP timeout in seconds.## Can also be specified via environment variable `MAIL_COMMAND_TIMEOUT_SECS`.## Default value: 30#command_timeout_secs = 30
# Total per-message timeout across all MX attempts in seconds.## Can also be specified via environment variable `MAIL_TOTAL_TIMEOUT_SECS`.## Default value: 60#total_timeout_secs = 60
# Max number of concurrent direct-MX sends. Limits the load placed# on any single recipient MX during a backlog drain.## Can also be specified via environment variable `MAIL_MAX_CONCURRENT_SENDS`.## Default value: 8#max_concurrent_sends = 8
# Require STARTTLS on every MX hop. When false, TLS is# attempted opportunistically and the session falls back to plaintext# if the remote does not advertise STARTTLS. Set true to refuse# plaintext delivery, at the cost of failing sends to MX hosts that# do not support TLS.## Can also be specified via environment variable `MAIL_REQUIRE_TLS`.## Default value: false#require_tls = false
[email.dkim]# DKIM selector. When unset, outgoing mail is not signed.## Can also be specified via environment variable `MAIL_DKIM_SELECTOR`.#selector =
# DKIM signing domain.## Can also be specified via environment variable `MAIL_DKIM_DOMAIN`.#domain =
# Path to the DKIM private key in PEM format. Supports RSA and# Ed25519 keys.## Can also be specified via environment variable `MAIL_DKIM_KEY_PATH`.#private_key_path =
[comms]# Directory of per-locale notification templates. When unset, built-in# plain-text strings are used. When set, every locale in `template_locales`# must have a complete template set (validated at startup).# Layout: `{templates_dir}/{locale}/{id}.{subject.txt,body.txt,body.html}`.## Can also be specified via environment variable `COMMS_TEMPLATES_DIR`.#templates_dir =
# Locales that must have a complete on-disk template set when# `templates_dir` is set. Comma-separated via `COMMS_TEMPLATE_LOCALES`.## Can also be specified via environment variable `COMMS_TEMPLATE_LOCALES`.## Default value: []#template_locales = []
# When `templates_dir` is set and the user's preferred locale is not in# `template_locales`, fall back to built-in `STRINGS_*` (plain text only).# When false, enqueue fails for unsupported locales.## Can also be specified via environment variable `COMMS_TEMPLATE_FALLBACK_TO_BUILTIN`.## Default value: true#fallback_to_builtin = true
[discord]# Discord bot token. When unset, Discord integration is disabled.## Can also be specified via environment variable `DISCORD_BOT_TOKEN`.#bot_token =
[telegram]# Telegram bot token. When unset, Telegram integration is disabled.## Can also be specified via environment variable `TELEGRAM_BOT_TOKEN`.#bot_token =
# Secret token for incoming webhook verification.## Can also be specified via environment variable `TELEGRAM_WEBHOOK_SECRET`.#webhook_secret =
[notifications]# Polling interval in milliseconds for the comms queue.## Can also be specified via environment variable `NOTIFICATION_POLL_INTERVAL_MS`.## Default value: 1000#poll_interval_ms = 1000
# Number of notifications to process per batch.## Can also be specified via environment variable `NOTIFICATION_BATCH_SIZE`.## Default value: 100#batch_size = 100
[sso][sso.github]# Can also be specified via environment variable `SSO_GITHUB_ENABLED`.# Default value: false#enabled = false
# Can also be specified via environment variable `SSO_GITHUB_CLIENT_ID`.#client_id =
# Can also be specified via environment variable `SSO_GITHUB_CLIENT_SECRET`.#client_secret =
# Can also be specified via environment variable `SSO_GITHUB_DISPLAY_NAME`.#display_name =
[sso.discord]# Can also be specified via environment variable `SSO_DISCORD_ENABLED`.# Default value: false#enabled = false
# Can also be specified via environment variable `SSO_DISCORD_CLIENT_ID`.#client_id =
# Can also be specified via environment variable `SSO_DISCORD_CLIENT_SECRET`.#client_secret =
# Can also be specified via environment variable `SSO_DISCORD_DISPLAY_NAME`.#display_name =
[sso.google]# Can also be specified via environment variable `SSO_GOOGLE_ENABLED`.# Default value: false#enabled = false
# Can also be specified via environment variable `SSO_GOOGLE_CLIENT_ID`.#client_id =
# Can also be specified via environment variable `SSO_GOOGLE_CLIENT_SECRET`.#client_secret =
# Can also be specified via environment variable `SSO_GOOGLE_DISPLAY_NAME`.#display_name =
[sso.gitlab]# Can also be specified via environment variable `SSO_GITLAB_ENABLED`.# Default value: false#enabled = false
# Can also be specified via environment variable `SSO_GITLAB_CLIENT_ID`.#client_id =
# Can also be specified via environment variable `SSO_GITLAB_CLIENT_SECRET`.#client_secret =
# Can also be specified via environment variable `SSO_GITLAB_ISSUER`.#issuer =
# Can also be specified via environment variable `SSO_GITLAB_DISPLAY_NAME`.#display_name =
[sso.oidc]# Can also be specified via environment variable `SSO_OIDC_ENABLED`.# Default value: false#enabled = false
# Can also be specified via environment variable `SSO_OIDC_CLIENT_ID`.#client_id =
# Can also be specified via environment variable `SSO_OIDC_CLIENT_SECRET`.#client_secret =
# Can also be specified via environment variable `SSO_OIDC_ISSUER`.#issuer =
# Can also be specified via environment variable `SSO_OIDC_DISPLAY_NAME`.#display_name =
[sso.apple]# Can also be specified via environment variable `SSO_APPLE_ENABLED`.# Default value: false#enabled = false
# Can also be specified via environment variable `SSO_APPLE_CLIENT_ID`.#client_id =
# Can also be specified via environment variable `SSO_APPLE_TEAM_ID`.#team_id =
# Can also be specified via environment variable `SSO_APPLE_KEY_ID`.#key_id =
# Can also be specified via environment variable `SSO_APPLE_PRIVATE_KEY`.#private_key =
[moderation]# External report-handling service URL.## Can also be specified via environment variable `REPORT_SERVICE_URL`.#report_service_url =
# DID of the external report-handling service.## Can also be specified via environment variable `REPORT_SERVICE_DID`.#report_service_did =
[import]# Whether the PDS accepts repo imports.## Can also be specified via environment variable `ACCEPTING_REPO_IMPORTS`.## Default value: true#accepting = true
# Maximum allowed import archive size in bytes (default 1 GiB).## Can also be specified via environment variable `MAX_IMPORT_SIZE`.## Default value: 1073741824#max_size = 1073741824
# Maximum number of blocks allowed in an import.## Can also be specified via environment variable `MAX_IMPORT_BLOCKS`.## Default value: 500000#max_blocks = 500000
# Skip CAR verification during import. Only for development/debugging.## Can also be specified via environment variable `SKIP_IMPORT_VERIFICATION`.## Default value: false#skip_verification = false
[scheduled]# Interval in seconds between scheduled delete checks.## Can also be specified via environment variable `SCHEDULED_DELETE_CHECK_INTERVAL_SECS`.## Default value: 3600#delete_check_interval_secs = 3600
# Interval in seconds between data file compaction scans (tranquil-store only).# Set to 0 to disable.## Can also be specified via environment variable `COMPACTION_INTERVAL_SECS`.## Default value: 3600#compaction_interval_secs = 3600
# Liveness ratio threshold below which a data file is compacted (0.0-1.0).## Can also be specified via environment variable `COMPACTION_LIVENESS_THRESHOLD`.## Default value: 0.7#compaction_liveness_threshold = 0.7
# Grace period in milliseconds before a zero-refcount block can be removed by compaction.## Can also be specified via environment variable `COMPACTION_GRACE_PERIOD_MS`.## Default value: 600000#compaction_grace_period_ms = 600000
# Interval in seconds between reachability walk runs (tranquil-store only).# Set to 0 to disable. Default: weekly.## Can also be specified via environment variable `REACHABILITY_WALK_INTERVAL_SECS`.## Default value: 604800#reachability_walk_interval_secs = 604800
# Interval in seconds between continuous archival passes (tranquil-store only).# Sealed eventlog segments are copied to the archival destination each tick.# Set to 0 to disable. Default: 60 seconds.## Can also be specified via environment variable `ARCHIVAL_INTERVAL_SECS`.## Default value: 60#archival_interval_secs = 60
# Archival destination directory for sealed eventlog segments.# If unset, archival is disabled.## Can also be specified via environment variable `ARCHIVAL_DEST_DIR`.#archival_dest_dir =
# Maximum age of events retained in the eventlog before pruning.# Per the atproto firehose spec, the relay backfill window only needs# to cover "hours or days".## Can also be specified via environment variable `EVENT_RETENTION_MAX_AGE_SECS`.## Default value: 604800#event_retention_max_age_secs = 604800
# Interval in seconds between event retention prune passes.# Set to 0 to disable.## Can also be specified via environment variable `EVENT_RETENTION_INTERVAL_SECS`.## Default value: 3600#event_retention_interval_secs = 3600