koi.rip
commits
On timeline, if there is multiple cards for same repository including a
star button, when user star/unstar the repository, only first `#starBtn`
is swapped with new button.
This can be fixed by adding `data-star-subject-at` attr to identify all
star buttons related to same repository and use `hx-swap-oob` to replace
all of them.
Signed-off-by: Seongmin Lee <git@boltless.me>
Not sending "XXX starred your string" notif yet.
Close: <https://tangled.org/tangled.org/core/issues/296>
Signed-off-by: Seongmin Lee <git@boltless.me>
- rename `starred_by_did` column to `did`
- rename `repo_at` column to `subject_at` and removed foreign key
constraints.
- rename `RepoAt` field to `SubjectAt`
- remove `Repo` field and split `models.Star` to `RepoStar` and
`StringStar` as now there can be two kinds of reverse mappings.
Signed-off-by: Seongmin Lee <git@boltless.me>
Easier to spot.
Signed-off-by: Anirudh Oppiliappan <anirudh@tangled.org>
Signed-off-by: Evan Jarrett <evan@evanjarrett.com>
Mobile need a dedicated search button to submit the form.
Also applied correct focus-ring for input tag
Signed-off-by: Seongmin Lee <git@boltless.me>
Signed-off-by: Runxi Yu <me@runxiyu.org>
Signed-off-by: Evan Jarrett <evan@evanjarrett.com>
Signed-off-by: Catherine <whitequark@whitequark.org>
Signed-off-by: oppiliappan <me@oppi.li>
this changes the routing logic slightly to allow non-path escaped refs
in compare urls that use the `...` syntax:
previously only this worked:
/compare/master/sl%2Fuvpzuszrulvq
/compare/master...sl%2Fuvpzuszrulvq
with this patch:
/compare/master/sl%2Fuvpzuszrulvq
/compare/master...sl%2Fuvpzuszrulvq
/compare/master...sl/uvpzuszrulvq (new)
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: Seongmin Lee <git@boltless.me>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: Will Andrews <did:plc:dadhhalkfcq3gucaq25hjqon>
older knots return a full modestring for each file. use some primitive
parsing to extract a filemode in these scenarios.
Signed-off-by: oppiliappan <me@oppi.li>
both spellings are supported.
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: ayla <ayla-git.barcode041@silomails.com>
helps forcing consistent indent sizes. especially html files
Signed-off-by: Seongmin Lee <git@boltless.me>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
encapsulates all the structure necessary to translate the knot's blob
response into a renderable component on the appview. this makes it
extensible for other types in the future too (CSV, Jupyter etc.)
Signed-off-by: oppiliappan <me@oppi.li>
we can now differentiate between regular directories and submodules in
filetree walkers. this fixes things like broken commit info and language
detection in submodules.
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
the blob response will additionally include submodule information if the
file is a git-submodule file.
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: Anirudh Oppiliappan <anirudh@tangled.org>
- allow repo website to be empty when editing base settings
- fix spindle hostname in nix vim
- fix default PLC url in spindles
Signed-off-by: oppiliappan <me@oppi.li>
this unecessary div causes an error where the div is duplicated when
multiple htmx requests are made.
the diff might tell a lot, but all I'm doing here is just merging
`div.relative` and `div#actions-%d` with some indent changes.
also, I removed the `w-fit` style to give pull comments full width like
issue comments have.
Signed-off-by: Seongmin Lee <git@boltless.me>
the appview rewrites urls of the form:
host.com/did-plc-foo/repo => host.com/did:plc:foo/repo
host.com/@handle.com/repo => host.com/handle.com/repo
however, the rewriter did not preserve query parameters or fragments:
host.com/@handle.com/repo?foo=bar => host.com/handle.com/repo?
this resulted in url rewrites being broken for git clones, which usees
the "service" query parameter:
../repo/info/refs?service=git-upload-pack => ../repo/info/refs?
the new url rewriter simply takes the existing url and replaces the path
component, thus preserving all other bits of the url.
Signed-off-by: oppiliappan <me@oppi.li>
instead of rewriting, simply accept .git suffixes in the ResolveRepo
middleware.
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
Secrets alone can be loaded from the environmentFile.
Signed-off-by: Anirudh Oppiliappan <anirudh@tangled.org>
- use grid to reduce the HTML elements
- move open/closed buttons to left
- move new button to bottom on small screen
Signed-off-by: Seongmin Lee <git@boltless.me>
Signed-off-by: Evan Jarrett <evan@evanjarrett.com>
Signed-off-by: Evan Jarrett <evan@evanjarrett.com>
Signed-off-by: Seongmin Lee <git@boltless.me>
Signed-off-by: Seongmin Lee <git@boltless.me>
Signed-off-by: Seongmin Lee <git@boltless.me>
pass mentioned DIDs on `NewIssue*` events
Signed-off-by: Seongmin Lee <boltlessengineer@proton.me>
Signed-off-by: Seongmin Lee <git@boltless.me>
add custom styling rule for mention links (no underline unless hover)
Signed-off-by: Seongmin Lee <boltlessengineer@proton.me>
Signed-off-by: oppiliappan <me@oppi.li>
Signed-off-by: oppiliappan <me@oppi.li>
On timeline, if there is multiple cards for same repository including a
star button, when user star/unstar the repository, only first `#starBtn`
is swapped with new button.
This can be fixed by adding `data-star-subject-at` attr to identify all
star buttons related to same repository and use `hx-swap-oob` to replace
all of them.
Signed-off-by: Seongmin Lee <git@boltless.me>
- rename `starred_by_did` column to `did`
- rename `repo_at` column to `subject_at` and removed foreign key
constraints.
- rename `RepoAt` field to `SubjectAt`
- remove `Repo` field and split `models.Star` to `RepoStar` and
`StringStar` as now there can be two kinds of reverse mappings.
Signed-off-by: Seongmin Lee <git@boltless.me>
Signed-off-by: oppiliappan <me@oppi.li>
this changes the routing logic slightly to allow non-path escaped refs
in compare urls that use the `...` syntax:
previously only this worked:
/compare/master/sl%2Fuvpzuszrulvq
/compare/master...sl%2Fuvpzuszrulvq
with this patch:
/compare/master/sl%2Fuvpzuszrulvq
/compare/master...sl%2Fuvpzuszrulvq
/compare/master...sl/uvpzuszrulvq (new)
Signed-off-by: oppiliappan <me@oppi.li>
this unecessary div causes an error where the div is duplicated when
multiple htmx requests are made.
the diff might tell a lot, but all I'm doing here is just merging
`div.relative` and `div#actions-%d` with some indent changes.
also, I removed the `w-fit` style to give pull comments full width like
issue comments have.
Signed-off-by: Seongmin Lee <git@boltless.me>
the appview rewrites urls of the form:
host.com/did-plc-foo/repo => host.com/did:plc:foo/repo
host.com/@handle.com/repo => host.com/handle.com/repo
however, the rewriter did not preserve query parameters or fragments:
host.com/@handle.com/repo?foo=bar => host.com/handle.com/repo?
this resulted in url rewrites being broken for git clones, which usees
the "service" query parameter:
../repo/info/refs?service=git-upload-pack => ../repo/info/refs?
the new url rewriter simply takes the existing url and replaces the path
component, thus preserving all other bits of the url.
Signed-off-by: oppiliappan <me@oppi.li>