"Das U-Boot" Source Tree
1#
2# Memory devices
3#
4
5menu "Memory Controller drivers"
6
7config MEMORY
8 bool "Enable Driver Model for Memory Controller drivers"
9 depends on DM
10 help
11 Enable driver model for Memory Controller devices.
12 These devices provide Memory bus interface to various devices like
13 SRAM, Ethernet adapters, FPGAs, etc.
14 For now this uclass has no methods yet.
15
16config ATMEL_EBI
17 bool "Support for Atmel EBI"
18 help
19 Driver for Atmel EBI controller. This is a dummy
20 driver. Doesn't provide an access to EBI controller. Select
21 this option to enable the NAND flash controller driver
22
23config SANDBOX_MEMORY
24 bool "Enable Sandbox Memory Controller driver"
25 depends on SANDBOX && MEMORY
26 help
27 This is a driver model based Memory Controller driver for sandbox.
28 Currently it is a stub only, as there are no usable uclass methods
29 yet.
30
31config STM32_FMC2_EBI
32 bool "Support for FMC2 External Bus Interface on STM32MP SoCs"
33 depends on ARCH_STM32MP
34 help
35 Select this option to enable the STM32 FMC2 External Bus Interface
36 controller. This driver configures the transactions with external
37 devices (like SRAM, ethernet adapters, FPGAs, LCD displays, ...) on
38 SOCs containing the FMC2 External Bus Interface.
39
40config TI_AEMIF
41 tristate "Texas Instruments AEMIF driver"
42 depends on ARCH_KEYSTONE || ARCH_DAVINCI
43 help
44 This driver is for the AEMIF module available in Texas Instruments
45 SoCs. AEMIF stands for Asynchronous External Memory Interface and
46 is intended to provide a glue-less interface to a variety of
47 asynchronuous memory devices like ASRAM, NOR and NAND memory. A total
48 of 256M bytes of any of these memories can be accessed at a given
49 time via four chip selects with 64M byte access per chip select.
50
51config TI_GPMC
52 bool "Texas Instruments GPMC driver"
53 depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
54 depends on MEMORY && CLK && OF_CONTROL
55 help
56 This driver is for the General Purpose Memory Controller (GPMC)
57 present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
58 interfacing to a variety of asynchronous as well as synchronous
59 memory drives like NOR, NAND, OneNAND, SRAM.
60
61if TI_GPMC
62config TI_GPMC_DEBUG
63 bool "Debug Texas Instruments GPMC timings"
64 help
65 Enable this to print GPMC timings before and after the GPMC registers
66 are programmed. This should not be left enabled on production systems.
67endif
68
69endmenu