/* * Copyright (C) 1996-2002,2007,2010,2012-2013,2016 Michael R. Elkins * Copyright (C) 2004 g10 Code GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifdef _MAKEDOC # include "config.h" # include "doc/makedoc-defs.h" #else # include "sort.h" #endif #include "buffy.h" #ifndef _MAKEDOC /* If you add a data type, be sure to update doc/makedoc.c */ #define DT_MASK 0x0f #define DT_BOOL 1 /* boolean option */ #define DT_NUM 2 /* a number (short) */ #define DT_STR 3 /* a string */ #define DT_PATH 4 /* a pathname */ #define DT_QUAD 5 /* quad-option (yes/no/ask-yes/ask-no) */ #define DT_SORT 6 /* sorting methods */ #define DT_RX 7 /* regular expressions */ #define DT_MAGIC 8 /* mailbox type */ #define DT_SYN 9 /* synonym for another variable */ #define DT_ADDR 10 /* e-mail address */ #define DT_MBCHARTBL 11 /* multibyte char table */ #define DT_LNUM 12 /* a number (long) */ #define DTYPE(x) ((x) & DT_MASK) /* subtypes */ #define DT_SUBTYPE_MASK 0xff0 #define DT_SORT_ALIAS 0x10 #define DT_SORT_BROWSER 0x20 #define DT_SORT_KEYS 0x40 #define DT_SORT_AUX 0x80 #define DT_SORT_SIDEBAR 0x100 /* flags to parse_set() */ #define MUTT_SET_INV (1<<0) /* default is to invert all vars */ #define MUTT_SET_UNSET (1<<1) /* default is to unset all vars */ #define MUTT_SET_RESET (1<<2) /* default is to reset all vars to default */ /* forced redraw/resort types */ #define R_NONE 0 #define R_INDEX (1<<0) /* redraw the index menu (MENU_MAIN) */ #define R_PAGER (1<<1) /* redraw the pager menu */ #define R_PAGER_FLOW (1<<2) /* reflow lineInfo and redraw the pager menu */ #define R_RESORT (1<<3) /* resort the mailbox */ #define R_RESORT_SUB (1<<4) /* resort subthreads */ #define R_RESORT_INIT (1<<5) /* resort from scratch */ #define R_TREE (1<<6) /* redraw the thread tree */ #define R_REFLOW (1<<7) /* reflow window layout and full redraw */ #define R_SIDEBAR (1<<8) /* redraw the sidebar */ #define R_MENU (1<<9) /* redraw all menus */ #define R_BOTH (R_INDEX | R_PAGER) #define R_RESORT_BOTH (R_RESORT | R_RESORT_SUB) struct option_t { char *option; short type; short flags; union pointer_long_t data; union pointer_long_t init; /* initial value */ }; #endif /* _MAKEDOC */ #ifndef ISPELL #define ISPELL "ispell" #endif struct option_t MuttVars[] = { /*++*/ { "abort_noattach", DT_QUAD, R_NONE, {.l=OPT_ABORTNOATTACH}, {.l=MUTT_NO} }, /* ** .pp ** When the body of the message matches $$abort_noattach_regexp and ** there are no attachments, this quadoption controls whether to ** abort sending the message. */ { "abort_noattach_regexp", DT_RX, R_NONE, {.p=&AbortNoattachRegexp}, {.p="attach"} }, /* ** .pp ** Specifies a regular expression to match against the body of the ** message, to determine if an attachment was mentioned but ** mistakenly forgotten. If it matches, $$abort_noattach will be ** consulted to determine if message sending will be aborted. ** .pp ** Like other regular expressions in Mutt, the search is case ** sensitive if the pattern contains at least one upper case letter, ** and case insensitive otherwise. */ { "abort_nosubject", DT_QUAD, R_NONE, {.l=OPT_SUBJECT}, {.l=MUTT_ASKYES} }, /* ** .pp ** If set to \fIyes\fP, when composing messages and no subject is given ** at the subject prompt, composition will be aborted. If set to ** \fIno\fP, composing messages with no subject given at the subject ** prompt will never be aborted. */ { "abort_unmodified", DT_QUAD, R_NONE, {.l=OPT_ABORT}, {.l=MUTT_YES} }, /* ** .pp ** If set to \fIyes\fP, composition will automatically abort after ** editing the message body if no changes are made to the file (this ** check only happens after the \fIfirst\fP edit of the file). When set ** to \fIno\fP, composition will never be aborted. */ { "alias_file", DT_PATH, R_NONE, {.p=&AliasFile}, {.p="~/.muttrc"} }, /* ** .pp ** The default file in which to save aliases created by the ** \fC$\fP function. Entries added to this file are ** encoded in the character set specified by $$config_charset if it ** is \fIset\fP or the current character set otherwise. ** .pp ** \fBNote:\fP Mutt will not automatically source this file; you must ** explicitly use the ``$source'' command for it to be executed in case ** this option points to a dedicated alias file. ** .pp ** The default for this option is the currently used muttrc file, or ** ``~/.muttrc'' if no user muttrc was found. */ { "alias_format", DT_STR, R_NONE, {.p=&AliasFmt}, {.p="%4n %2f %t %-10a %r"} }, /* ** .pp ** Specifies the format of the data displayed for the ``$alias'' menu. The ** following \fCprintf(3)\fP-style sequences are available: ** .dl ** .dt %a .dd alias name ** .dt %f .dd flags - currently, a ``d'' for an alias marked for deletion ** .dt %n .dd index number ** .dt %r .dd address which alias expands to ** .dt %t .dd character which indicates if the alias is tagged for inclusion ** .de */ { "allow_8bit", DT_BOOL, R_NONE, {.l=OPTALLOW8BIT}, {.l=1} }, /* ** .pp ** Controls whether 8-bit data is converted to 7-bit using either Quoted- ** Printable or Base64 encoding when sending mail. */ { "allow_ansi", DT_BOOL, R_NONE, {.l=OPTALLOWANSI}, {.l=0} }, /* ** .pp ** Controls whether ANSI color codes in messages (and color tags in ** rich text messages) are to be interpreted. ** Messages containing these codes are rare, but if this option is \fIset\fP, ** their text will be colored accordingly. Note that this may override ** your color choices, and even present a security problem, since a ** message could include a line like ** .ts ** [-- PGP output follows ... ** .te ** .pp ** and give it the same color as your attachment color (see also ** $$crypt_timestamp). */ { "arrow_cursor", DT_BOOL, R_MENU, {.l=OPTARROWCURSOR}, {.l=0} }, /* ** .pp ** When \fIset\fP, an arrow (``->'') will be used to indicate the current entry ** in menus instead of highlighting the whole line. On slow network or modem ** links this will make response faster because there is less that has to ** be redrawn on the screen when moving to the next or previous entries ** in the menu. */ { "ascii_chars", DT_BOOL, R_BOTH, {.l=OPTASCIICHARS}, {.l=0} }, /* ** .pp ** If \fIset\fP, Mutt will use plain ASCII characters when displaying thread ** and attachment trees, instead of the default \fIACS\fP characters. */ { "askbcc", DT_BOOL, R_NONE, {.l=OPTASKBCC}, {.l=0} }, /* ** .pp ** If \fIset\fP, Mutt will prompt you for blind-carbon-copy (Bcc) recipients ** before editing an outgoing message. */ { "askcc", DT_BOOL, R_NONE, {.l=OPTASKCC}, {.l=0} }, /* ** .pp ** If \fIset\fP, Mutt will prompt you for carbon-copy (Cc) recipients before ** editing the body of an outgoing message. */ { "assumed_charset", DT_STR, R_NONE, {.p=&AssumedCharset}, {.p=0} }, /* ** .pp ** This variable is a colon-separated list of character encoding ** schemes for messages without character encoding indication. ** Header field values and message body content without character encoding ** indication would be assumed that they are written in one of this list. ** By default, all the header fields and message body without any charset ** indication are assumed to be in ``us-ascii''. ** .pp ** For example, Japanese users might prefer this: ** .ts ** set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8" ** .te ** .pp ** However, only the first content is valid for the message body. */ { "attach_charset", DT_STR, R_NONE, {.p=&AttachCharset}, {.p=0} }, /* ** .pp ** This variable is a colon-separated list of character encoding ** schemes for text file attachments. Mutt uses this setting to guess ** which encoding files being attached are encoded in to convert them to ** a proper character set given in $$send_charset. ** .pp ** If \fIunset\fP, the value of $$charset will be used instead. ** For example, the following configuration would work for Japanese ** text handling: ** .ts ** set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8" ** .te ** .pp ** Note: for Japanese users, ``iso-2022-*'' must be put at the head ** of the value as shown above if included. */ { "attach_format", DT_STR, R_NONE, {.p=&AttachFormat}, {.p="%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "} }, /* ** .pp ** This variable describes the format of the ``attachment'' menu. The ** following \fCprintf(3)\fP-style sequences are understood: ** .dl ** .dt %C .dd charset ** .dt %c .dd requires charset conversion (``n'' or ``c'') ** .dt %D .dd deleted flag ** .dt %d .dd description (if none, falls back to %F) ** .dt %e .dd MIME content-transfer-encoding ** .dt %F .dd filename in content-disposition header (if none, falls back to %f) ** .dt %f .dd filename ** .dt %I .dd disposition (``I'' for inline, ``A'' for attachment) ** .dt %m .dd major MIME type ** .dt %M .dd MIME subtype ** .dt %n .dd attachment number ** .dt %Q .dd ``Q'', if MIME part qualifies for attachment counting ** .dt %s .dd size (see $formatstrings-size) ** .dt %t .dd tagged flag ** .dt %T .dd graphic tree characters ** .dt %u .dd unlink (=to delete) flag ** .dt %X .dd number of qualifying MIME parts in this part and its children ** (please see the ``$attachments'' section for possible speed effects) ** .dt %>X .dd right justify the rest of the string and pad with character ``X'' ** .dt %|X .dd pad to the end of the line with character ``X'' ** .dt %*X .dd soft-fill with character ``X'' as pad ** .de ** .pp ** For an explanation of ``soft-fill'', see the $$index_format documentation. */ { "attach_sep", DT_STR, R_NONE, {.p=&AttachSep}, {.p="\n"} }, /* ** .pp ** The separator to add between attachments when operating (saving, ** printing, piping, etc) on a list of tagged attachments. */ { "attach_split", DT_BOOL, R_NONE, {.l=OPTATTACHSPLIT}, {.l=1} }, /* ** .pp ** If this variable is \fIunset\fP, when operating (saving, printing, piping, ** etc) on a list of tagged attachments, Mutt will concatenate the ** attachments and will operate on them as a single attachment. The ** $$attach_sep separator is added after each attachment. When \fIset\fP, ** Mutt will operate on the attachments one by one. */ { "attribution", DT_STR, R_NONE, {.p=&Attribution}, {.p="On %d, %n wrote:"} }, /* ** .pp ** This is the string that will precede a message which has been included ** in a reply. For a full listing of defined \fCprintf(3)\fP-like sequences see ** the section on $$index_format. */ { "attribution_locale", DT_STR, R_NONE, {.p=&AttributionLocale}, {.p=0} }, /* ** .pp ** The locale used by \fCstrftime(3)\fP to format dates in the ** $attribution string. Legal values are the strings your system ** accepts for the locale environment variable \fC$$$LC_TIME\fP. ** .pp ** This variable is to allow the attribution date format to be ** customized by recipient or folder using hooks. By default, Mutt ** will use your locale environment, so there is no need to set ** this except to override that default. */ { "auto_subscribe", DT_BOOL, R_NONE, {.l=OPTAUTOSUBSCRIBE}, {.l=0} }, /* ** .pp ** When \fIset\fP, Mutt assumes the presence of a List-Post header ** means the recipient is subscribed to the list. Unless the mailing list ** is in the ``unsubscribe'' or ``unlist'' lists, it will be added ** to the ``$subscribe'' list. Parsing and checking these things slows ** header reading down, so this option is disabled by default. */ { "auto_tag", DT_BOOL, R_NONE, {.l=OPTAUTOTAG}, {.l=0} }, /* ** .pp ** When \fIset\fP, functions in the \fIindex\fP menu which affect a message ** will be applied to all tagged messages (if there are any). When ** unset, you must first use the \fC\fP function (bound to ``;'' ** by default) to make the next function apply to all tagged messages. */ #ifdef USE_AUTOCRYPT { "autocrypt", DT_BOOL, R_NONE, {.l=OPTAUTOCRYPT}, {.l=0} }, /* ** .pp ** When \fIset\fP, enables autocrypt, which provides ** passive encryption protection with keys exchanged via headers. ** See ``$autocryptdoc'' for more details. ** (Autocrypt only) */ { "autocrypt_acct_format", DT_STR, R_MENU, {.p=&AutocryptAcctFormat}, {.p="%4n %-30a %20p %10s"} }, /* ** .pp ** This variable describes the format of the ``autocrypt account'' menu. ** The following \fCprintf(3)\fP-style sequences are understood ** .dl ** .dt %a .dd email address ** .dt %k .dd gpg keyid ** .dt %n .dd current entry number ** .dt %p .dd prefer-encrypt flag ** .dt %s .dd status flag (active/inactive) ** .de ** .pp ** (Autocrypt only) */ { "autocrypt_dir", DT_PATH, R_NONE, {.p=&AutocryptDir}, {.p="~/.mutt/autocrypt"} }, /* ** .pp ** This variable sets where autocrypt files are stored, including the GPG ** keyring and sqlite database. See ``$autocryptdoc'' for more details. ** (Autocrypt only) */ { "autocrypt_reply", DT_BOOL, R_NONE, {.l=OPTAUTOCRYPTREPLY}, {.l=1} }, /* ** .pp ** When \fIset\fP, replying to an autocrypt email automatically ** enables autocrypt in the reply. You may want to unset this if you're using ** the same key for autocrypt as normal web-of-trust, so that autocrypt ** isn't forced on for all encrypted replies. ** (Autocrypt only) */ #endif { "autoedit", DT_BOOL, R_NONE, {.l=OPTAUTOEDIT}, {.l=0} }, /* ** .pp ** When \fIset\fP along with $$edit_headers, Mutt will skip the initial ** send-menu (prompting for subject and recipients) and allow you to ** immediately begin editing the body of your ** message. The send-menu may still be accessed once you have finished ** editing the body of your message. ** .pp ** .pp ** \fBNote:\fP when this option is \fIset\fP, you cannot use send-hooks that depend ** on the recipients when composing a new (non-reply) message, as the initial ** list of recipients is empty. ** .pp ** Also see $$fast_reply. */ { "beep", DT_BOOL, R_NONE, {.l=OPTBEEP}, {.l=1} }, /* ** .pp ** When this variable is \fIset\fP, mutt will beep when an error occurs. */ { "beep_new", DT_BOOL, R_NONE, {.l=OPTBEEPNEW}, {.l=0} }, /* ** .pp ** When this variable is \fIset\fP, mutt will beep whenever it prints a message ** notifying you of new mail. This is independent of the setting of the ** $$beep variable. */ { "bounce", DT_QUAD, R_NONE, {.l=OPT_BOUNCE}, {.l=MUTT_ASKYES} }, /* ** .pp ** Controls whether you will be asked to confirm bouncing messages. ** If set to \fIyes\fP you don't get asked if you want to bounce a ** message. Setting this variable to \fIno\fP is not generally useful, ** and thus not recommended, because you are unable to bounce messages. */ { "bounce_delivered", DT_BOOL, R_NONE, {.l=OPTBOUNCEDELIVERED}, {.l=1} }, /* ** .pp ** When this variable is \fIset\fP, mutt will include Delivered-To headers when ** bouncing messages. Postfix users may wish to \fIunset\fP this variable. */ { "braille_friendly", DT_BOOL, R_NONE, {.l=OPTBRAILLEFRIENDLY}, {.l=0} }, /* ** .pp ** When this variable is \fIset\fP, mutt will place the cursor at the beginning ** of the current line in menus, even when the $$arrow_cursor variable ** is \fIunset\fP, making it easier for blind persons using Braille displays to ** follow these menus. The option is \fIunset\fP by default because many ** visual terminals don't permit making the cursor invisible. */ { "browser_abbreviate_mailboxes", DT_BOOL, R_NONE, {.l=OPTBROWSERABBRMAILBOXES}, {.l=1} }, /* ** .pp ** When this variable is \fIset\fP, mutt will abbreviate mailbox ** names in the browser mailbox list, using '~' and '=' ** shortcuts. ** .pp ** The default \fC"alpha"\fP setting of $$sort_browser uses ** locale-based sorting (using \fCstrcoll(3)\fP), which ignores some ** punctuation. This can lead to some situations where the order ** doesn't make intuitive sense. In those cases, it may be ** desirable to \fIunset\fP this variable. */ { "browser_sticky_cursor", DT_BOOL, R_NONE, {.l=OPTBROWSERSTICKYCURSOR}, {.l=1} }, /* ** .pp ** When this variable is \fIset\fP, the browser will attempt to keep ** the cursor on the same mailbox when performing various functions. ** These include moving up a directory, toggling between mailboxes ** and directory listing, creating/renaming a mailbox, toggling ** subscribed mailboxes, and entering a new mask. */ #if defined(USE_SSL) { "certificate_file", DT_PATH, R_NONE, {.p=&SslCertFile}, {.p="~/.mutt_certificates"} }, /* ** .pp ** This variable specifies the file where the certificates you trust ** are saved. When an unknown certificate is encountered, you are asked ** if you accept it or not. If you accept it, the certificate can also ** be saved in this file and further connections are automatically ** accepted. ** .pp ** You can also manually add CA certificates in this file. Any server ** certificate that is signed with one of these CA certificates is ** also automatically accepted. ** .pp ** Example: ** .ts ** set certificate_file=~/.mutt/certificates ** .te ** */ #endif { "change_folder_next", DT_BOOL, R_NONE, {.l=OPTCHANGEFOLDERNEXT}, {.l=0} }, /* ** .pp ** When this variable is \fIset\fP, the \fC\fP function ** mailbox suggestion will start at the next folder in your ``$mailboxes'' ** list, instead of starting at the first folder in the list. */ { "charset", DT_STR, R_NONE, {.p=&Charset}, {.p=0} }, /* ** .pp ** Character set your terminal uses to display and enter textual data. ** It is also the fallback for $$send_charset. ** .pp ** Upon startup Mutt tries to derive this value from environment variables ** such as \fC$$$LC_CTYPE\fP or \fC$$$LANG\fP. ** .pp ** \fBNote:\fP It should only be set in case Mutt isn't able to determine the ** character set used correctly. */ { "check_mbox_size", DT_BOOL, R_NONE, {.l=OPTCHECKMBOXSIZE}, {.l=0} }, /* ** .pp ** When this variable is \fIset\fP, mutt will use file size attribute instead of ** access time when checking for new mail in mbox and mmdf folders. ** .pp ** This variable is \fIunset\fP by default and should only be enabled when ** new mail detection for these folder types is unreliable or doesn't work. ** .pp ** Note that enabling this variable should happen before any ``$mailboxes'' ** directives occur in configuration files regarding mbox or mmdf folders ** because mutt needs to determine the initial new mail status of such a ** mailbox by performing a fast mailbox scan when it is defined. ** Afterwards the new mail status is tracked by file size changes. */ { "check_new", DT_BOOL, R_NONE, {.l=OPTCHECKNEW}, {.l=1} }, /* ** .pp ** \fBNote:\fP this option only affects \fImaildir\fP and \fIMH\fP style ** mailboxes. ** .pp ** When \fIset\fP, Mutt will check for new mail delivered while the ** mailbox is open. Especially with MH mailboxes, this operation can ** take quite some time since it involves scanning the directory and ** checking each file to see if it has already been looked at. If ** this variable is \fIunset\fP, no check for new mail is performed ** while the mailbox is open. */ { "collapse_unread", DT_BOOL, R_NONE, {.l=OPTCOLLAPSEUNREAD}, {.l=1} }, /* ** .pp ** When \fIunset\fP, Mutt will not collapse a thread if it contains any ** unread messages. */ { "compose_format", DT_STR, R_MENU, {.p=&ComposeFormat}, {.p="-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"} }, /* ** .pp ** Controls the format of the status line displayed in the ``compose'' ** menu. This string is similar to $$status_format, but has its own ** set of \fCprintf(3)\fP-like sequences: ** .dl ** .dt %a .dd total number of attachments ** .dt %h .dd local hostname ** .dt %l .dd approximate size (in bytes) of the current message (see $formatstrings-size) ** .dt %v .dd Mutt version string ** .de ** .pp ** See the text describing the $$status_format option for more ** information on how to set $$compose_format. */ { "config_charset", DT_STR, R_NONE, {.p=&ConfigCharset}, {.p=0} }, /* ** .pp ** When defined, Mutt will recode commands in rc files from this ** encoding to the current character set as specified by $$charset ** and aliases written to $$alias_file from the current character set. ** .pp ** Please note that if setting $$charset it must be done before ** setting $$config_charset. ** .pp ** Recoding should be avoided as it may render unconvertable ** characters as question marks which can lead to undesired ** side effects (for example in regular expressions). */ { "confirmappend", DT_BOOL, R_NONE, {.l=OPTCONFIRMAPPEND}, {.l=1} }, /* ** .pp ** When \fIset\fP, Mutt will prompt for confirmation when appending messages to ** an existing mailbox. */ { "confirmcreate", DT_BOOL, R_NONE, {.l=OPTCONFIRMCREATE}, {.l=1} }, /* ** .pp ** When \fIset\fP, Mutt will prompt for confirmation when saving messages to a ** mailbox which does not yet exist before creating it. */ { "connect_timeout", DT_NUM, R_NONE, {.p=&ConnectTimeout}, {.l=30} }, /* ** .pp ** Causes Mutt to timeout a network connection (for IMAP, POP or SMTP) after this ** many seconds if the connection is not able to be established. A negative ** value causes Mutt to wait indefinitely for the connection attempt to succeed. */ { "content_type", DT_STR, R_NONE, {.p=&ContentType}, {.p="text/plain"} }, /* ** .pp ** Sets the default Content-Type for the body of newly composed messages. */ { "copy", DT_QUAD, R_NONE, {.l=OPT_COPY}, {.l=MUTT_YES} }, /* ** .pp ** This variable controls whether or not copies of your outgoing messages ** will be saved for later references. Also see $$record, ** $$save_name, $$force_name and ``$fcc-hook''. */ { "count_alternatives", DT_BOOL, R_NONE, {.l=OPTCOUNTALTERNATIVES}, {.l=0} }, /* ** .pp ** When \fIset\fP, Mutt will recurse inside multipart/alternatives while ** performing attachment searching and counting (see $attachments). ** .pp ** Traditionally, multipart/alternative parts have simply represented ** different encodings of the main content of the email. Unfortunately, ** some mail clients have started to place email attachments inside ** one of alternatives. Setting this will allow Mutt to find ** and count matching attachments hidden there, and include them ** in the index via %X or through ~X pattern matching. */ { "pgp_autoencrypt", DT_SYN, R_NONE, {.p="crypt_autoencrypt"}, {.p=0} }, { "crypt_autoencrypt", DT_BOOL, R_NONE, {.l=OPTCRYPTAUTOENCRYPT}, {.l=0} }, /* ** .pp ** Setting this variable will cause Mutt to always attempt to PGP ** encrypt outgoing messages. This is probably only useful in ** connection to the ``$send-hook'' command. It can be overridden ** by use of the pgp menu, when encryption is not required or ** signing is requested as well. If $$smime_is_default is \fIset\fP, ** then OpenSSL is used instead to create S/MIME messages and ** settings can be overridden by use of the smime menu instead. ** (Crypto only) */ { "crypt_autopgp", DT_BOOL, R_NONE, {.l=OPTCRYPTAUTOPGP}, {.l=1} }, /* ** .pp ** This variable controls whether or not mutt may automatically enable ** PGP encryption/signing for messages. See also $$crypt_autoencrypt, ** $$crypt_replyencrypt, ** $$crypt_autosign, $$crypt_replysign and $$smime_is_default. */ { "pgp_autosign", DT_SYN, R_NONE, {.p="crypt_autosign"}, {.p=0} }, { "crypt_autosign", DT_BOOL, R_NONE, {.l=OPTCRYPTAUTOSIGN}, {.l=0} }, /* ** .pp ** Setting this variable will cause Mutt to always attempt to ** cryptographically sign outgoing messages. This can be overridden ** by use of the pgp menu, when signing is not required or ** encryption is requested as well. If $$smime_is_default is \fIset\fP, ** then OpenSSL is used instead to create S/MIME messages and settings can ** be overridden by use of the smime menu instead of the pgp menu. ** (Crypto only) */ { "crypt_autosmime", DT_BOOL, R_NONE, {.l=OPTCRYPTAUTOSMIME}, {.l=1} }, /* ** .pp ** This variable controls whether or not mutt may automatically enable ** S/MIME encryption/signing for messages. See also $$crypt_autoencrypt, ** $$crypt_replyencrypt, ** $$crypt_autosign, $$crypt_replysign and $$smime_is_default. */ { "crypt_confirmhook", DT_BOOL, R_NONE, {.l=OPTCRYPTCONFIRMHOOK}, {.l=1} }, /* ** .pp ** If set, then you will be prompted for confirmation of keys when using ** the \fIcrypt-hook\fP command. If unset, no such confirmation prompt will ** be presented. This is generally considered unsafe, especially where ** typos are concerned. */ { "crypt_opportunistic_encrypt", DT_BOOL, R_NONE, {.l=OPTCRYPTOPPORTUNISTICENCRYPT}, {.l=0} }, /* ** .pp ** Setting this variable will cause Mutt to automatically enable and ** disable encryption, based on whether all message recipient keys ** can be located by Mutt. ** .pp ** When this option is enabled, Mutt will enable/disable encryption ** each time the TO, CC, and BCC lists are edited. If ** $$edit_headers is set, Mutt will also do so each time the message ** is edited. ** .pp ** While this is set, encryption can't be manually enabled/disabled. ** The pgp or smime menus provide a selection to temporarily disable ** this option for the current message. ** .pp ** If $$crypt_autoencrypt or $$crypt_replyencrypt enable encryption for ** a message, this option will be disabled for that message. It can ** be manually re-enabled in the pgp or smime menus. ** (Crypto only) */ { "crypt_protected_headers_read", DT_BOOL, R_NONE, {.l=OPTCRYPTPROTHDRSREAD}, {.l=1} }, /* ** .pp ** When set, Mutt will display protected headers ("Memory Hole") in the pager, ** and will update the index and header cache with revised headers. ** ** Protected headers are stored inside the encrypted or signed part of an ** an email, to prevent disclosure or tampering. ** For more information see https://github.com/autocrypt/memoryhole. ** Currently Mutt only supports the Subject header. ** .pp ** Encrypted messages using protected headers often substitute the exposed ** Subject header with a dummy value (see $$crypt_protected_headers_subject). ** Mutt will update its concept of the correct subject \fBafter\fP the ** message is opened, i.e. via the \fC\fP function. ** If you reply to a message before opening it, Mutt will end up using ** the dummy Subject header, so be sure to open such a message first. ** (Crypto only) */ { "crypt_protected_headers_save", DT_BOOL, R_NONE, {.l=OPTCRYPTPROTHDRSSAVE}, {.l=0} }, /* ** .pp ** When $$crypt_protected_headers_read is set, and a message with a ** protected Subject is opened, Mutt will save the updated Subject ** into the header cache by default. This allows searching/limiting ** based on the protected Subject header if the mailbox is ** re-opened, without having to re-open the message each time. ** However, for mbox/mh mailbox types, or if header caching is not ** set up, you would need to re-open the message each time the ** mailbox was reopened before you could see or search/limit on the ** protected subject again. ** .pp ** When this variable is set, Mutt additionally saves the protected ** Subject back \fBin the clear-text message headers\fP. This ** provides better usability, but with the tradeoff of reduced ** security. The protected Subject header, which may have ** previously been encrypted, is now stored in clear-text in the ** message headers. Copying the message elsewhere, via Mutt or ** external tools, could expose this previously encrypted data. ** Please make sure you understand the consequences of this before ** you enable this variable. ** (Crypto only) */ { "crypt_protected_headers_subject", DT_STR, R_NONE, {.p=&ProtHdrSubject}, {.p="Encrypted subject"} }, /* ** .pp ** When $$crypt_protected_headers_write is set, and the message is marked ** for encryption, this will be substituted into the Subject field in the ** message headers. ** ** To prevent a subject from being substituted, unset this variable, or set it ** to the empty string. ** (Crypto only) */ { "crypt_protected_headers_write", DT_BOOL, R_NONE, {.l=OPTCRYPTPROTHDRSWRITE}, {.l=0} }, /* ** .pp ** When set, Mutt will generate protected headers ("Memory Hole") for ** signed and encrypted emails. ** ** Protected headers are stored inside the encrypted or signed part of an ** an email, to prevent disclosure or tampering. ** For more information see https://github.com/autocrypt/memoryhole. ** ** Currently Mutt only supports the Subject header. ** (Crypto only) */ { "pgp_replyencrypt", DT_SYN, R_NONE, {.p="crypt_replyencrypt"}, {.p=0} }, { "crypt_replyencrypt", DT_BOOL, R_NONE, {.l=OPTCRYPTREPLYENCRYPT}, {.l=1} }, /* ** .pp ** If \fIset\fP, automatically PGP or OpenSSL encrypt replies to messages which are ** encrypted. ** (Crypto only) */ { "pgp_replysign", DT_SYN, R_NONE, {.p="crypt_replysign"}, {.p=0} }, { "crypt_replysign", DT_BOOL, R_NONE, {.l=OPTCRYPTREPLYSIGN}, {.l=0} }, /* ** .pp ** If \fIset\fP, automatically PGP or OpenSSL sign replies to messages which are ** signed. ** .pp ** \fBNote:\fP this does not work on messages that are encrypted ** \fIand\fP signed! ** (Crypto only) */ { "pgp_replysignencrypted", DT_SYN, R_NONE, {.p="crypt_replysignencrypted"}, {.p=0} }, { "crypt_replysignencrypted", DT_BOOL, R_NONE, {.l=OPTCRYPTREPLYSIGNENCRYPTED}, {.l=0} }, /* ** .pp ** If \fIset\fP, automatically PGP or OpenSSL sign replies to messages ** which are encrypted. This makes sense in combination with ** $$crypt_replyencrypt, because it allows you to sign all ** messages which are automatically encrypted. This works around ** the problem noted in $$crypt_replysign, that mutt is not able ** to find out whether an encrypted message is also signed. ** (Crypto only) */ { "crypt_timestamp", DT_BOOL, R_NONE, {.l=OPTCRYPTTIMESTAMP}, {.l=1} }, /* ** .pp ** If \fIset\fP, mutt will include a time stamp in the lines surrounding ** PGP or S/MIME output, so spoofing such lines is more difficult. ** If you are using colors to mark these lines, and rely on these, ** you may \fIunset\fP this setting. ** (Crypto only) */ { "crypt_use_gpgme", DT_BOOL, R_NONE, {.l=OPTCRYPTUSEGPGME}, {.l=0} }, /* ** .pp ** This variable controls the use of the GPGME-enabled crypto backends. ** If it is \fIset\fP and Mutt was built with gpgme support, the gpgme code for ** S/MIME and PGP will be used instead of the classic code. Note that ** you need to set this option in .muttrc; it won't have any effect when ** used interactively. ** .pp ** Note that the GPGME backend does not support creating old-style inline ** (traditional) PGP encrypted or signed messages (see $$pgp_autoinline). */ { "crypt_use_pka", DT_BOOL, R_NONE, {.l=OPTCRYPTUSEPKA}, {.l=0} }, /* ** .pp ** Controls whether mutt uses PKA ** (see http://www.g10code.de/docs/pka-intro.de.pdf) during signature ** verification (only supported by the GPGME backend). */ { "pgp_verify_sig", DT_SYN, R_NONE, {.p="crypt_verify_sig"}, {.p=0} }, { "crypt_verify_sig", DT_QUAD, R_NONE, {.l=OPT_VERIFYSIG}, {.l=MUTT_YES} }, /* ** .pp ** If \fI``yes''\fP, always attempt to verify PGP or S/MIME signatures. ** If \fI``ask-*''\fP, ask whether or not to verify the signature. ** If \fI``no''\fP, never attempt to verify cryptographic signatures. ** (Crypto only) */ { "date_format", DT_STR, R_MENU, {.p=&DateFmt}, {.p="!%a, %b %d, %Y at %I:%M:%S%p %Z"} }, /* ** .pp ** This variable controls the format of the date printed by the ``%d'' ** sequence in $$index_format. This is passed to the \fCstrftime(3)\fP ** function to process the date, see the man page for the proper syntax. ** .pp ** Unless the first character in the string is a bang (``!''), the month ** and week day names are expanded according to the locale. ** If the first character in the string is a ** bang, the bang is discarded, and the month and week day names in the ** rest of the string are expanded in the \fIC\fP locale (that is in US ** English). */ { "default_hook", DT_STR, R_NONE, {.p=&DefaultHook}, {.p="~f %s !~P | (~P ~C %s)"} }, /* ** .pp ** This variable controls how ``$message-hook'', ``$reply-hook'', ``$send-hook'', ** ``$send2-hook'', ``$save-hook'', and ``$fcc-hook'' will ** be interpreted if they are specified with only a simple regexp, ** instead of a matching pattern. The hooks are expanded when they are ** declared, so a hook will be interpreted according to the value of this ** variable at the time the hook is declared. ** .pp ** The default value matches ** if the message is either from a user matching the regular expression ** given, or if it is from you (if the from address matches ** ``$alternates'') and is to or cc'ed to a user matching the given ** regular expression. */ { "delete", DT_QUAD, R_NONE, {.l=OPT_DELETE}, {.l=MUTT_ASKYES} }, /* ** .pp ** Controls whether or not messages are really deleted when closing or ** synchronizing a mailbox. If set to \fIyes\fP, messages marked for ** deleting will automatically be purged without prompting. If set to ** \fIno\fP, messages marked for deletion will be kept in the mailbox. */ { "delete_untag", DT_BOOL, R_NONE, {.l=OPTDELETEUNTAG}, {.l=1} }, /* ** .pp ** If this option is \fIset\fP, mutt will untag messages when marking them ** for deletion. This applies when you either explicitly delete a message, ** or when you save it to another folder. */ { "digest_collapse", DT_BOOL, R_NONE, {.l=OPTDIGESTCOLLAPSE}, {.l=1} }, /* ** .pp ** If this option is \fIset\fP, mutt's received-attachments menu will not show the subparts of ** individual messages in a multipart/digest. To see these subparts, press ``v'' on that menu. */ { "display_filter", DT_PATH, R_PAGER, {.p=&DisplayFilter}, {.p=0} }, /* ** .pp ** When set, specifies a command used to filter messages. When a message ** is viewed it is passed as standard input to $$display_filter, and the ** filtered message is read from the standard output. */ #if defined(DL_STANDALONE) && defined(USE_DOTLOCK) { "dotlock_program", DT_PATH, R_NONE, {.p=&MuttDotlock}, {.p=BINDIR "/mutt_dotlock"} }, /* ** .pp ** Contains the path of the \fCmutt_dotlock(8)\fP binary to be used by ** mutt. */ #endif { "dsn_notify", DT_STR, R_NONE, {.p=&DsnNotify}, {.p=0} }, /* ** .pp ** This variable sets the request for when notification is returned. The ** string consists of a comma separated list (no spaces!) of one or more ** of the following: \fInever\fP, to never request notification, ** \fIfailure\fP, to request notification on transmission failure, ** \fIdelay\fP, to be notified of message delays, \fIsuccess\fP, to be ** notified of successful transmission. ** .pp ** Example: ** .ts ** set dsn_notify="failure,delay" ** .te ** .pp ** \fBNote:\fP when using $$sendmail for delivery, you should not enable ** this unless you are either using Sendmail 8.8.x or greater or a MTA ** providing a \fCsendmail(1)\fP-compatible interface supporting the \fC-N\fP option ** for DSN. For SMTP delivery, DSN support is auto-detected so that it ** depends on the server whether DSN will be used or not. */ { "dsn_return", DT_STR, R_NONE, {.p=&DsnReturn}, {.p=0} }, /* ** .pp ** This variable controls how much of your message is returned in DSN ** messages. It may be set to either \fIhdrs\fP to return just the ** message header, or \fIfull\fP to return the full message. ** .pp ** Example: ** .ts ** set dsn_return=hdrs ** .te ** .pp ** \fBNote:\fP when using $$sendmail for delivery, you should not enable ** this unless you are either using Sendmail 8.8.x or greater or a MTA ** providing a \fCsendmail(1)\fP-compatible interface supporting the \fC-R\fP option ** for DSN. For SMTP delivery, DSN support is auto-detected so that it ** depends on the server whether DSN will be used or not. */ { "duplicate_threads", DT_BOOL, R_RESORT|R_RESORT_INIT|R_INDEX, {.l=OPTDUPTHREADS}, {.l=1} }, /* ** .pp ** This variable controls whether mutt, when $$sort is set to \fIthreads\fP, threads ** messages with the same Message-Id together. If it is \fIset\fP, it will indicate ** that it thinks they are duplicates of each other with an equals sign ** in the thread tree. */ { "edit_headers", DT_BOOL, R_NONE, {.l=OPTEDITHDRS}, {.l=0} }, /* ** .pp ** This option allows you to edit the header of your outgoing messages ** along with the body of your message. ** .pp ** Although the compose menu may have localized header labels, the ** labels passed to your editor will be standard RFC 2822 headers, ** (e.g. To:, Cc:, Subject:). Headers added in your editor must ** also be RFC 2822 headers, or one of the pseudo headers listed in ** ``$edit-header''. Mutt will not understand localized header ** labels, just as it would not when parsing an actual email. ** .pp ** \fBNote\fP that changes made to the References: and Date: headers are ** ignored for interoperability reasons. */ { "edit_hdrs", DT_SYN, R_NONE, {.p="edit_headers"}, {.p=0} }, /* */ { "editor", DT_PATH, R_NONE, {.p=&Editor}, {.p=0} }, /* ** .pp ** This variable specifies which editor is used by mutt. ** It defaults to the value of the \fC$$$VISUAL\fP, or \fC$$$EDITOR\fP, environment ** variable, or to the string ``vi'' if neither of those are set. ** .pp ** The \fC$$editor\fP string may contain a \fI%s\fP escape, which will be replaced by the name ** of the file to be edited. If the \fI%s\fP escape does not appear in \fC$$editor\fP, a ** space and the name to be edited are appended. ** .pp ** The resulting string is then executed by running ** .ts ** sh -c 'string' ** .te ** .pp ** where \fIstring\fP is the expansion of \fC$$editor\fP described above. */ { "encode_from", DT_BOOL, R_NONE, {.l=OPTENCODEFROM}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt will quoted-printable encode messages when ** they contain the string ``From '' (note the trailing space) in the beginning of a line. ** This is useful to avoid the tampering certain mail delivery and transport ** agents tend to do with messages (in order to prevent tools from ** misinterpreting the line as a mbox message separator). */ #if defined(USE_SSL_OPENSSL) { "entropy_file", DT_PATH, R_NONE, {.p=&SslEntropyFile}, {.p=0} }, /* ** .pp ** The file which includes random data that is used to initialize SSL ** library functions. */ #endif { "envelope_from_address", DT_ADDR, R_NONE, {.p=&EnvFrom}, {.p=0} }, /* ** .pp ** Manually sets the \fIenvelope\fP sender for outgoing messages. ** This value is ignored if $$use_envelope_from is \fIunset\fP. */ { "error_history", DT_NUM, R_NONE, {.p=&ErrorHistSize}, {.l=30} }, /* ** .pp ** This variable controls the size (in number of strings remembered) ** of the error messages displayed by mutt. These can be shown with ** the \fC\fP function. The history is cleared each ** time this variable is set. */ { "escape", DT_STR, R_NONE, {.p=&EscChar}, {.p="~"} }, /* ** .pp ** Escape character to use for functions in the built-in editor. */ { "fast_reply", DT_BOOL, R_NONE, {.l=OPTFASTREPLY}, {.l=0} }, /* ** .pp ** When \fIset\fP, the initial prompt for recipients and subject are skipped ** when replying to messages, and the initial prompt for subject is ** skipped when forwarding messages. ** .pp ** \fBNote:\fP this variable has no effect when the $$autoedit ** variable is \fIset\fP. */ { "fcc_attach", DT_QUAD, R_NONE, {.l=OPT_FCCATTACH}, {.l=MUTT_YES} }, /* ** .pp ** This variable controls whether or not attachments on outgoing messages ** are saved along with the main body of your message. */ { "fcc_before_send", DT_BOOL, R_NONE, {.l=OPTFCCBEFORESEND}, {.l=0} }, /* ** .pp ** When this variable is \fIset\fP, FCCs will occur before sending ** the message. Before sending, the message cannot be manipulated, ** so it will be stored the exact same as sent: ** $$fcc_attach and $$fcc_clear will be ignored (using their default ** values). ** .pp ** When \fIunset\fP, the default, FCCs will occur after sending. ** Variables $$fcc_attach and $$fcc_clear will be respected, allowing ** it to be stored without attachments or encryption/signing if ** desired. */ { "fcc_clear", DT_BOOL, R_NONE, {.l=OPTFCCCLEAR}, {.l=0} }, /* ** .pp ** When this variable is \fIset\fP, FCCs will be stored unencrypted and ** unsigned, even when the actual message is encrypted and/or ** signed. ** (PGP only) */ { "flag_safe", DT_BOOL, R_NONE, {.l=OPTFLAGSAFE}, {.l=0} }, /* ** .pp ** If set, flagged messages cannot be deleted. */ { "folder", DT_PATH, R_NONE, {.p=&Maildir}, {.p="~/Mail"} }, /* ** .pp ** Specifies the default location of your mailboxes. A ``+'' or ``='' at the ** beginning of a pathname will be expanded to the value of this ** variable. Note that if you change this variable (from the default) ** value you need to make sure that the assignment occurs \fIbefore\fP ** you use ``+'' or ``='' for any other variables since expansion takes place ** when handling the ``$mailboxes'' command. */ { "folder_format", DT_STR, R_MENU, {.p=&FolderFormat}, {.p="%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"} }, /* ** .pp ** This variable allows you to customize the file browser display to your ** personal taste. This string is similar to $$index_format, but has ** its own set of \fCprintf(3)\fP-like sequences: ** .dl ** .dt %C .dd current file number ** .dt %d .dd date/time folder was last modified ** .dt %D .dd date/time folder was last modified using $$date_format. ** .dt %f .dd filename (``/'' is appended to directory names, ** ``@'' to symbolic links and ``*'' to executable ** files) ** .dt %F .dd file permissions ** .dt %g .dd group name (or numeric gid, if missing) ** .dt %l .dd number of hard links ** .dt %m .dd number of messages in the mailbox * ** .dt %n .dd number of unread messages in the mailbox * ** .dt %N .dd N if mailbox has new mail, blank otherwise ** .dt %s .dd size in bytes (see $formatstrings-size) ** .dt %t .dd ``*'' if the file is tagged, blank otherwise ** .dt %u .dd owner name (or numeric uid, if missing) ** .dt %>X .dd right justify the rest of the string and pad with character ``X'' ** .dt %|X .dd pad to the end of the line with character ``X'' ** .dt %*X .dd soft-fill with character ``X'' as pad ** .de ** .pp ** For an explanation of ``soft-fill'', see the $$index_format documentation. ** .pp ** * = can be optionally printed if nonzero ** .pp ** %m, %n, and %N only work for monitored mailboxes. ** %m requires $$mail_check_stats to be set. ** %n requires $$mail_check_stats to be set (except for IMAP mailboxes). */ { "followup_to", DT_BOOL, R_NONE, {.l=OPTFOLLOWUPTO}, {.l=1} }, /* ** .pp ** Controls whether or not the ``Mail-Followup-To:'' header field is ** generated when sending mail. When \fIset\fP, Mutt will generate this ** field when you are replying to a known mailing list, specified with ** the ``$subscribe'' or ``$lists'' commands. ** .pp ** This field has two purposes. First, preventing you from ** receiving duplicate copies of replies to messages which you send ** to mailing lists, and second, ensuring that you do get a reply ** separately for any messages sent to known lists to which you are ** not subscribed. ** .pp ** The header will contain only the list's address ** for subscribed lists, and both the list address and your own ** email address for unsubscribed lists. Without this header, a ** group reply to your message sent to a subscribed list will be ** sent to both the list and your address, resulting in two copies ** of the same email for you. */ { "force_name", DT_BOOL, R_NONE, {.l=OPTFORCENAME}, {.l=0} }, /* ** .pp ** This variable is similar to $$save_name, except that Mutt will ** store a copy of your outgoing message by the username of the address ** you are sending to even if that mailbox does not exist. ** .pp ** Also see the $$record variable. */ { "forward_attachments", DT_QUAD, R_NONE, {.l=OPT_FORWATTS}, {.l=MUTT_ASKYES} }, /* ** .pp ** When forwarding inline (i.e. $$mime_forward \fIunset\fP or ** answered with ``no'' and $$forward_decode \fIset\fP), attachments ** which cannot be decoded in a reasonable manner will be attached ** to the newly composed message if this quadoption is \fIset\fP or ** answered with ``yes''. */ { "forward_attribution_intro", DT_STR, R_NONE, {.p=&ForwardAttrIntro}, {.p="----- Forwarded message from %f -----"} }, /* ** .pp ** This is the string that will precede a message which has been forwarded ** in the main body of a message (when $$mime_forward is unset). ** For a full listing of defined \fCprintf(3)\fP-like sequences see ** the section on $$index_format. See also $$attribution_locale. */ { "forward_attribution_trailer", DT_STR, R_NONE, {.p=&ForwardAttrTrailer}, {.p="----- End forwarded message -----"} }, /* ** .pp ** This is the string that will follow a message which has been forwarded ** in the main body of a message (when $$mime_forward is unset). ** For a full listing of defined \fCprintf(3)\fP-like sequences see ** the section on $$index_format. See also $$attribution_locale. */ { "forward_decode", DT_BOOL, R_NONE, {.l=OPTFORWDECODE}, {.l=1} }, /* ** .pp ** Controls the decoding of complex MIME messages into \fCtext/plain\fP when ** forwarding a message. The message header is also RFC2047 decoded. ** This variable is only used, if $$mime_forward is \fIunset\fP, ** otherwise $$mime_forward_decode is used instead. */ { "forw_decode", DT_SYN, R_NONE, {.p="forward_decode"}, {.p=0} }, /* */ { "forward_decrypt", DT_BOOL, R_NONE, {.l=OPTFORWDECRYPT}, {.l=1} }, /* ** .pp ** Controls the handling of encrypted messages when forwarding a message. ** When \fIset\fP, the outer layer of encryption is stripped off. This ** variable is only used if $$mime_forward is \fIset\fP and ** $$mime_forward_decode is \fIunset\fP. ** (PGP only) */ { "forw_decrypt", DT_SYN, R_NONE, {.p="forward_decrypt"}, {.p=0} }, /* */ { "forward_edit", DT_QUAD, R_NONE, {.l=OPT_FORWEDIT}, {.l=MUTT_YES} }, /* ** .pp ** This quadoption controls whether or not the user is automatically ** placed in the editor when forwarding messages. For those who always want ** to forward with no modification, use a setting of ``no''. */ { "forward_format", DT_STR, R_NONE, {.p=&ForwFmt}, {.p="[%a: %s]"} }, /* ** .pp ** This variable controls the default subject when forwarding a message. ** It uses the same format sequences as the $$index_format variable. */ { "forw_format", DT_SYN, R_NONE, {.p="forward_format"}, {.p=0} }, /* */ { "forward_quote", DT_BOOL, R_NONE, {.l=OPTFORWQUOTE}, {.l=0} }, /* ** .pp ** When \fIset\fP, forwarded messages included in the main body of the ** message (when $$mime_forward is \fIunset\fP) will be quoted using ** $$indent_string. */ { "forw_quote", DT_SYN, R_NONE, {.p="forward_quote"}, {.p=0} }, /* */ { "from", DT_ADDR, R_NONE, {.p=&From}, {.p=0} }, /* ** .pp ** When \fIset\fP, this variable contains a default from address. It ** can be overridden using ``$my_hdr'' (including from a ``$send-hook'') and ** $$reverse_name. This variable is ignored if $$use_from is \fIunset\fP. ** .pp ** This setting defaults to the contents of the environment variable \fC$$$EMAIL\fP. */ { "gecos_mask", DT_RX, R_NONE, {.p=&GecosMask}, {.p="^[^,]*"} }, /* ** .pp ** A regular expression used by mutt to parse the GECOS field of a password ** entry when expanding the alias. The default value ** will return the string up to the first ``,'' encountered. ** If the GECOS field contains a string like ``lastname, firstname'' then you ** should set it to ``\fC.*\fP''. ** .pp ** This can be useful if you see the following behavior: you address an e-mail ** to user ID ``stevef'' whose full name is ``Steve Franklin''. If mutt expands ** ``stevef'' to ``"Franklin" stevef@foo.bar'' then you should set the $$gecos_mask to ** a regular expression that will match the whole name so mutt will expand ** ``Franklin'' to ``Franklin, Steve''. */ { "hdr_format", DT_SYN, R_NONE, {.p="index_format"}, {.p=0} }, /* */ { "hdrs", DT_BOOL, R_NONE, {.l=OPTHDRS}, {.l=1} }, /* ** .pp ** When \fIunset\fP, the header fields normally added by the ``$my_hdr'' ** command are not created. This variable \fImust\fP be unset before ** composing a new message or replying in order to take effect. If \fIset\fP, ** the user defined header fields are added to every new message. */ { "header", DT_BOOL, R_NONE, {.l=OPTHEADER}, {.l=0} }, /* ** .pp ** When \fIset\fP, this variable causes Mutt to include the header ** of the message you are replying to into the edit buffer. ** The $$weed setting applies. */ #ifdef USE_HCACHE { "header_cache", DT_PATH, R_NONE, {.p=&HeaderCache}, {.p=0} }, /* ** .pp ** This variable points to the header cache database. ** If pointing to a directory Mutt will contain a header cache ** database file per folder, if pointing to a file that file will ** be a single global header cache. By default it is \fIunset\fP so no header ** caching will be used. ** .pp ** Header caching can greatly improve speed when opening POP, IMAP ** MH or Maildir folders, see ``$caching'' for details. */ #if defined(HAVE_QDBM) || defined(HAVE_TC) || defined(HAVE_KC) { "header_cache_compress", DT_BOOL, R_NONE, {.l=OPTHCACHECOMPRESS}, {.l=1} }, /* ** .pp ** When mutt is compiled with qdbm, tokyocabinet, or kyotocabinet as header ** cache backend, this option determines whether the database will be compressed. ** Compression results in database files roughly being one fifth ** of the usual diskspace, but the decompression can result in a ** slower opening of cached folder(s) which in general is still ** much faster than opening non header cached folders. */ #endif /* HAVE_QDBM */ #if defined(HAVE_GDBM) || defined(HAVE_DB4) { "header_cache_pagesize", DT_LNUM, R_NONE, {.p=&HeaderCachePageSize}, {.l=16384} }, /* ** .pp ** When mutt is compiled with either gdbm or bdb4 as the header cache backend, ** this option changes the database page size. Too large or too small ** values can waste space, memory, or CPU time. The default should be more ** or less optimal for most use cases. */ #endif /* HAVE_GDBM || HAVE_DB4 */ #endif /* USE_HCACHE */ { "header_color_partial", DT_BOOL, R_PAGER_FLOW, {.l=OPTHEADERCOLORPARTIAL}, {.l=0} }, /* ** .pp ** When \fIset\fP, color header regexps behave like color body regexps: ** color is applied to the exact text matched by the regexp. When ** \fIunset\fP, color is applied to the entire header. ** .pp ** One use of this option might be to apply color to just the header labels. ** .pp ** See ``$color'' for more details. */ { "help", DT_BOOL, R_REFLOW, {.l=OPTHELP}, {.l=1} }, /* ** .pp ** When \fIset\fP, help lines describing the bindings for the major functions ** provided by each menu are displayed on the first line of the screen. ** .pp ** \fBNote:\fP The binding will not be displayed correctly if the ** function is bound to a sequence rather than a single keystroke. Also, ** the help line may not be updated if a binding is changed while Mutt is ** running. Since this variable is primarily aimed at new users, neither ** of these should present a major problem. */ { "hidden_host", DT_BOOL, R_NONE, {.l=OPTHIDDENHOST}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt will skip the host name part of $$hostname variable ** when adding the domain part to addresses. This variable does not ** affect the generation of Message-IDs, and it will not lead to the ** cut-off of first-level domains. */ { "hide_limited", DT_BOOL, R_TREE|R_INDEX, {.l=OPTHIDELIMITED}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt will not show the presence of messages that are hidden ** by limiting, in the thread tree. */ { "hide_missing", DT_BOOL, R_TREE|R_INDEX, {.l=OPTHIDEMISSING}, {.l=1} }, /* ** .pp ** When \fIset\fP, mutt will not show the presence of missing messages in the ** thread tree. */ { "hide_thread_subject", DT_BOOL, R_TREE|R_INDEX, {.l=OPTHIDETHREADSUBJECT}, {.l=1} }, /* ** .pp ** When \fIset\fP, mutt will not show the subject of messages in the thread ** tree that have the same subject as their parent or closest previously ** displayed sibling. */ { "hide_top_limited", DT_BOOL, R_TREE|R_INDEX, {.l=OPTHIDETOPLIMITED}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt will not show the presence of messages that are hidden ** by limiting, at the top of threads in the thread tree. Note that when ** $$hide_limited is \fIset\fP, this option will have no effect. */ { "hide_top_missing", DT_BOOL, R_TREE|R_INDEX, {.l=OPTHIDETOPMISSING}, {.l=1} }, /* ** .pp ** When \fIset\fP, mutt will not show the presence of missing messages at the ** top of threads in the thread tree. Note that when $$hide_missing is ** \fIset\fP, this option will have no effect. */ { "history", DT_NUM, R_NONE, {.p=&HistSize}, {.l=10} }, /* ** .pp ** This variable controls the size (in number of strings remembered) of ** the string history buffer per category. The buffer is cleared each time the ** variable is set. */ { "history_file", DT_PATH, R_NONE, {.p=&HistFile}, {.p="~/.mutthistory"} }, /* ** .pp ** The file in which Mutt will save its history. ** .pp ** Also see $$save_history. */ { "history_remove_dups", DT_BOOL, R_NONE, {.l=OPTHISTREMOVEDUPS}, {.l=0} }, /* ** .pp ** When \fIset\fP, all of the string history will be scanned for duplicates ** when a new entry is added. Duplicate entries in the $$history_file will ** also be removed when it is periodically compacted. */ { "honor_disposition", DT_BOOL, R_NONE, {.l=OPTHONORDISP}, {.l=0} }, /* ** .pp ** When \fIset\fP, Mutt will not display attachments with a ** disposition of ``attachment'' inline even if it could ** render the part to plain text. These MIME parts can only ** be viewed from the attachment menu. ** .pp ** If \fIunset\fP, Mutt will render all MIME parts it can ** properly transform to plain text. */ { "honor_followup_to", DT_QUAD, R_NONE, {.l=OPT_MFUPTO}, {.l=MUTT_YES} }, /* ** .pp ** This variable controls whether or not a Mail-Followup-To header is ** honored when group-replying to a message. */ { "hostname", DT_STR, R_NONE, {.p=&Fqdn}, {.p=0} }, /* ** .pp ** Specifies the fully-qualified hostname of the system mutt is running on ** containing the host's name and the DNS domain it belongs to. It is used ** as the domain part (after ``@'') for local email addresses as well as ** Message-Id headers. ** .pp ** Its value is determined at startup as follows: the node's ** hostname is first determined by the \fCuname(3)\fP function. The ** domain is then looked up using the \fCgethostname(2)\fP and ** \fCgetaddrinfo(3)\fP functions. If those calls are unable to ** determine the domain, the full value returned by uname is used. ** Optionally, Mutt can be compiled with a fixed domain name in ** which case a detected one is not used. ** .pp ** Also see $$use_domain and $$hidden_host. */ #if defined(HAVE_LIBIDN) || defined(HAVE_LIBIDN2) { "idn_decode", DT_BOOL, R_MENU, {.l=OPTIDNDECODE}, {.l=1} }, /* ** .pp ** When \fIset\fP, Mutt will show you international domain names decoded. ** Note: You can use IDNs for addresses even if this is \fIunset\fP. ** This variable only affects decoding. (IDN only) */ { "idn_encode", DT_BOOL, R_MENU, {.l=OPTIDNENCODE}, {.l=1} }, /* ** .pp ** When \fIset\fP, Mutt will encode international domain names using ** IDN. Unset this if your SMTP server can handle newer (RFC 6531) ** UTF-8 encoded domains. (IDN only) */ #endif /* defined(HAVE_LIBIDN) || defined(HAVE_LIBIDN2) */ { "ignore_linear_white_space", DT_BOOL, R_NONE, {.l=OPTIGNORELWS}, {.l=0} }, /* ** .pp ** This option replaces linear-white-space between encoded-word ** and text to a single space to prevent the display of MIME-encoded ** ``Subject:'' field from being divided into multiple lines. */ { "ignore_list_reply_to", DT_BOOL, R_NONE, {.l=OPTIGNORELISTREPLYTO}, {.l=0} }, /* ** .pp ** Affects the behavior of the \fC\fP function when replying to ** messages from mailing lists (as defined by the ``$subscribe'' or ** ``$lists'' commands). When \fIset\fP, if the ``Reply-To:'' field is ** set to the same value as the ``To:'' field, Mutt assumes that the ** ``Reply-To:'' field was set by the mailing list to automate responses ** to the list, and will ignore this field. To direct a response to the ** mailing list when this option is \fIset\fP, use the \fC$\fP ** function; \fC\fP will reply to both the sender and the ** list. */ #ifdef USE_IMAP { "imap_authenticators", DT_STR, R_NONE, {.p=&ImapAuthenticators}, {.p=0} }, /* ** .pp ** This is a colon-delimited list of authentication methods mutt may ** attempt to use to log in to an IMAP server, in the order mutt should ** try them. Authentication methods are either ``login'' or the right ** side of an IMAP ``AUTH=xxx'' capability string, e.g. ``digest-md5'', ``gssapi'' ** or ``cram-md5''. This option is case-insensitive. If it's ** \fIunset\fP (the default) mutt will try all available methods, ** in order from most-secure to least-secure. ** .pp ** Example: ** .ts ** set imap_authenticators="gssapi:cram-md5:login" ** .te ** .pp ** \fBNote:\fP Mutt will only fall back to other authentication methods if ** the previous methods are unavailable. If a method is available but ** authentication fails, mutt will not connect to the IMAP server. */ { "imap_check_subscribed", DT_BOOL, R_NONE, {.l=OPTIMAPCHECKSUBSCRIBED}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt will fetch the set of subscribed folders from ** your server on connection, and add them to the set of mailboxes ** it polls for new mail just as if you had issued individual ``$mailboxes'' ** commands. */ { "imap_condstore", DT_BOOL, R_NONE, {.l=OPTIMAPCONDSTORE}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt will use the CONDSTORE extension (RFC 7162) ** if advertised by the server. Mutt's current implementation is basic, ** used only for initial message fetching and flag updates. ** .pp ** For some IMAP servers, enabling this will slightly speed up ** downloading initial messages. Unfortunately, Gmail is not one ** those, and displays worse performance when enabled. Your ** mileage may vary. */ { "imap_delim_chars", DT_STR, R_NONE, {.p=&ImapDelimChars}, {.p="/."} }, /* ** .pp ** This contains the list of characters which you would like to treat ** as folder separators for displaying IMAP paths. In particular it ** helps in using the ``='' shortcut for your \fIfolder\fP variable. */ { "imap_fetch_chunk_size", DT_LNUM, R_NONE, {.p=&ImapFetchChunkSize}, {.l=0} }, /* ** .pp ** When set to a value greater than 0, new headers will be downloaded ** in sets of this size. If you have a very large mailbox, this might ** prevent a timeout and disconnect when opening the mailbox, by sending ** a FETCH per set of this size instead of a single FETCH for all new ** headers. */ { "imap_headers", DT_STR, R_INDEX, {.p=&ImapHeaders}, {.p=0} }, /* ** .pp ** Mutt requests these header fields in addition to the default headers ** (``Date:'', ``From:'', ``Sender:'', ``Subject:'', ``To:'', ``Cc:'', ``Message-Id:'', ** ``References:'', ``Content-Type:'', ``Content-Description:'', ``In-Reply-To:'', ** ``Reply-To:'', ``Lines:'', ``List-Post:'', ``X-Label:'') from IMAP ** servers before displaying the index menu. You may want to add more ** headers for spam detection. ** .pp ** \fBNote:\fP This is a space separated list, items should be uppercase ** and not contain the colon, e.g. ``X-BOGOSITY X-SPAM-STATUS'' for the ** ``X-Bogosity:'' and ``X-Spam-Status:'' header fields. */ { "imap_idle", DT_BOOL, R_NONE, {.l=OPTIMAPIDLE}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt will attempt to use the IMAP IDLE extension ** to check for new mail in the current mailbox. Some servers ** (dovecot was the inspiration for this option) react badly ** to mutt's implementation. If your connection seems to freeze ** up periodically, try unsetting this. */ { "imap_keepalive", DT_NUM, R_NONE, {.p=&ImapKeepalive}, {.l=300} }, /* ** .pp ** This variable specifies the maximum amount of time in seconds that mutt ** will wait before polling open IMAP connections, to prevent the server ** from closing them before mutt has finished with them. The default is ** well within the RFC-specified minimum amount of time (30 minutes) before ** a server is allowed to do this, but in practice the RFC does get ** violated every now and then. Reduce this number if you find yourself ** getting disconnected from your IMAP server due to inactivity. */ { "imap_list_subscribed", DT_BOOL, R_NONE, {.l=OPTIMAPLSUB}, {.l=0} }, /* ** .pp ** This variable configures whether IMAP folder browsing will look for ** only subscribed folders or all folders. This can be toggled in the ** IMAP browser with the \fC\fP function. */ { "imap_login", DT_STR, R_NONE, {.p=&ImapLogin}, {.p=0} }, /* ** .pp ** Your login name on the IMAP server. ** .pp ** This variable defaults to the value of $$imap_user. */ { "imap_oauth_refresh_command", DT_STR, R_NONE, {.p=&ImapOauthRefreshCmd}, {.p=0} }, /* ** .pp ** The command to run to generate an OAUTH refresh token for ** authorizing your connection to your IMAP server. This command will be ** run on every connection attempt that uses the OAUTHBEARER authentication ** mechanism. See ``$oauth'' for details. */ { "imap_pass", DT_STR, R_NONE, {.p=&ImapPass}, {.p=0} }, /* ** .pp ** Specifies the password for your IMAP account. If \fIunset\fP, Mutt will ** prompt you for your password when you invoke the \fC\fP function ** or try to open an IMAP folder. ** .pp ** \fBWarning\fP: you should only use this option when you are on a ** fairly secure machine, because the superuser can read your muttrc even ** if you are the only one who can read the file. */ { "imap_passive", DT_BOOL, R_NONE, {.l=OPTIMAPPASSIVE}, {.l=1} }, /* ** .pp ** When \fIset\fP, mutt will not open new IMAP connections to check for new ** mail. Mutt will only check for new mail over existing IMAP ** connections. This is useful if you don't want to be prompted for ** user/password pairs on mutt invocation, or if opening the connection ** is slow. */ { "imap_peek", DT_BOOL, R_NONE, {.l=OPTIMAPPEEK}, {.l=1} }, /* ** .pp ** When \fIset\fP, mutt will avoid implicitly marking your mail as read whenever ** you fetch a message from the server. This is generally a good thing, ** but can make closing an IMAP folder somewhat slower. This option ** exists to appease speed freaks. */ { "imap_pipeline_depth", DT_NUM, R_NONE, {.p=&ImapPipelineDepth}, {.l=15} }, /* ** .pp ** Controls the number of IMAP commands that may be queued up before they ** are sent to the server. A deeper pipeline reduces the amount of time ** mutt must wait for the server, and can make IMAP servers feel much ** more responsive. But not all servers correctly handle pipelined commands, ** so if you have problems you might want to try setting this variable to 0. ** .pp ** \fBNote:\fP Changes to this variable have no effect on open connections. */ { "imap_poll_timeout", DT_NUM, R_NONE, {.p=&ImapPollTimeout}, {.l=15} }, /* ** .pp ** This variable specifies the maximum amount of time in seconds ** that mutt will wait for a response when polling IMAP connections ** for new mail, before timing out and closing the connection. Set ** to 0 to disable timing out. */ { "imap_qresync", DT_BOOL, R_NONE, {.l=OPTIMAPQRESYNC}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt will use the QRESYNC extension (RFC 7162) ** if advertised by the server. Mutt's current implementation is basic, ** used only for initial message fetching and flag updates. ** .pp ** Note: this feature is currently experimental. If you experience ** strange behavior, such as duplicate or missing messages please ** file a bug report to let us know. */ { "imap_servernoise", DT_BOOL, R_NONE, {.l=OPTIMAPSERVERNOISE}, {.l=1} }, /* ** .pp ** When \fIset\fP, mutt will display warning messages from the IMAP ** server as error messages. Since these messages are often ** harmless, or generated due to configuration problems on the ** server which are out of the users' hands, you may wish to suppress ** them at some point. */ { "imap_user", DT_STR, R_NONE, {.p=&ImapUser}, {.p=0} }, /* ** .pp ** The name of the user whose mail you intend to access on the IMAP ** server. ** .pp ** This variable defaults to your user name on the local machine. */ #endif { "implicit_autoview", DT_BOOL,R_NONE, {.l=OPTIMPLICITAUTOVIEW}, {.l=0} }, /* ** .pp ** If set to ``yes'', mutt will look for a mailcap entry with the ** ``\fCcopiousoutput\fP'' flag set for \fIevery\fP MIME attachment it doesn't have ** an internal viewer defined for. If such an entry is found, mutt will ** use the viewer defined in that entry to convert the body part to text ** form. */ { "include", DT_QUAD, R_NONE, {.l=OPT_INCLUDE}, {.l=MUTT_ASKYES} }, /* ** .pp ** Controls whether or not a copy of the message(s) you are replying to ** is included in your reply. */ { "include_encrypted", DT_BOOL, R_NONE, {.l=OPTINCLUDEENCRYPTED}, {.l=0} }, /* ** .pp ** Controls whether or not Mutt includes separately encrypted attachment ** contents when replying. ** .pp ** This variable was added to prevent accidental exposure of encrypted ** contents when replying to an attacker. If a previously encrypted message ** were attached by the attacker, they could trick an unwary recipient into ** decrypting and including the message in their reply. */ { "include_onlyfirst", DT_BOOL, R_NONE, {.l=OPTINCLUDEONLYFIRST}, {.l=0} }, /* ** .pp ** Controls whether or not Mutt includes only the first attachment ** of the message you are replying. */ { "indent_string", DT_STR, R_NONE, {.p=&Prefix}, {.p="> "} }, /* ** .pp ** Specifies the string to prepend to each line of text quoted in a ** message to which you are replying. You are strongly encouraged not to ** change this value, as it tends to agitate the more fanatical netizens. ** .pp ** The value of this option is ignored if $$text_flowed is set, because ** the quoting mechanism is strictly defined for format=flowed. ** .pp ** This option is a format string, please see the description of ** $$index_format for supported \fCprintf(3)\fP-style sequences. */ { "indent_str", DT_SYN, R_NONE, {.p="indent_string"}, {.p=0} }, /* */ { "index_format", DT_STR, R_BOTH, {.p=&HdrFmt}, {.p="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"} }, /* ** .pp ** This variable allows you to customize the message index display to ** your personal taste. ** .pp ** ``Format strings'' are similar to the strings used in the C ** function \fCprintf(3)\fP to format output (see the man page for more details). ** For an explanation of the %? construct, see the $$status_format description. ** The following sequences are defined in Mutt: ** .dl ** .dt %a .dd address of the author ** .dt %A .dd reply-to address (if present; otherwise: address of author) ** .dt %b .dd filename of the original message folder (think mailbox) ** .dt %B .dd the list to which the letter was sent, or else the folder name (%b). ** .dt %c .dd number of characters (bytes) in the message (see $formatstrings-size) ** .dt %C .dd current message number ** .dt %d .dd date and time of the message in the format specified by ** $$date_format converted to sender's time zone ** .dt %D .dd date and time of the message in the format specified by ** $$date_format converted to the local time zone ** .dt %e .dd current message number in thread ** .dt %E .dd number of messages in current thread ** .dt %f .dd sender (address + real name), either From: or Return-Path: ** .dt %F .dd author name, or recipient name if the message is from you ** .dt %H .dd spam attribute(s) of this message ** .dt %i .dd message-id of the current message ** .dt %l .dd number of lines in the unprocessed message (may not work with ** maildir, mh, and IMAP folders) ** .dt %L .dd If an address in the ``To:'' or ``Cc:'' header field matches an address ** defined by the users ``$subscribe'' command, this displays ** "To ", otherwise the same as %F. ** .dt %m .dd total number of message in the mailbox ** .dt %M .dd number of hidden messages if the thread is collapsed. ** .dt %N .dd message score ** .dt %n .dd author's real name (or address if missing) ** .dt %O .dd original save folder where mutt would formerly have ** stashed the message: list name or recipient name ** if not sent to a list ** .dt %P .dd progress indicator for the built-in pager (how much of the file has been displayed) ** .dt %r .dd comma separated list of ``To:'' recipients ** .dt %R .dd comma separated list of ``Cc:'' recipients ** .dt %s .dd subject of the message ** .dt %S .dd single character status of the message (``N''/``O''/``D''/``d''/``!''/``r''/``\(as'') ** .dt %t .dd ``To:'' field (recipients) ** .dt %T .dd the appropriate character from the $$to_chars string ** .dt %u .dd user (login) name of the author ** .dt %v .dd first name of the author, or the recipient if the message is from you ** .dt %X .dd number of attachments ** (please see the ``$attachments'' section for possible speed effects) ** .dt %y .dd ``X-Label:'' field, if present ** .dt %Y .dd ``X-Label:'' field, if present, and \fI(1)\fP not at part of a thread tree, ** \fI(2)\fP at the top of a thread, or \fI(3)\fP ``X-Label:'' is different from ** preceding message's ``X-Label:''. ** .dt %Z .dd a three character set of message status flags. ** the first character is new/read/replied flags (``n''/``o''/``r''/``O''/``N''). ** the second is deleted or encryption flags (``D''/``d''/``S''/``P''/``s''/``K''). ** the third is either tagged/flagged (``\(as''/``!''), or one of the characters ** listed in $$to_chars. ** .dt %@name@ .dd insert and evaluate format-string from the matching ** ``$index-format-hook'' command ** .dt %{fmt} .dd the date and time of the message is converted to sender's ** time zone, and ``fmt'' is expanded by the library function ** \fCstrftime(3)\fP; a leading bang disables locales ** .dt %[fmt] .dd the date and time of the message is converted to the local ** time zone, and ``fmt'' is expanded by the library function ** \fCstrftime(3)\fP; a leading bang disables locales ** .dt %(fmt) .dd the local date and time when the message was received. ** ``fmt'' is expanded by the library function \fCstrftime(3)\fP; ** a leading bang disables locales ** .dt % .dd the current local time. ``fmt'' is expanded by the library ** function \fCstrftime(3)\fP; a leading bang disables locales. ** .dt %>X .dd right justify the rest of the string and pad with character ``X'' ** .dt %|X .dd pad to the end of the line with character ``X'' ** .dt %*X .dd soft-fill with character ``X'' as pad ** .de ** .pp ** Note that for mbox/mmdf, ``%l'' applies to the unprocessed message, and ** for maildir/mh, the value comes from the ``Lines:'' header field when ** present (the meaning is normally the same). Thus the value depends on ** the encodings used in the different parts of the message and has little ** meaning in practice. ** .pp ** ``Soft-fill'' deserves some explanation: Normal right-justification ** will print everything to the left of the ``%>'', displaying padding and ** whatever lies to the right only if there's room. By contrast, ** soft-fill gives priority to the right-hand side, guaranteeing space ** to display it and showing padding only if there's still room. If ** necessary, soft-fill will eat text leftwards to make room for ** rightward text. ** .pp ** Note that these expandos are supported in ** ``$save-hook'', ``$fcc-hook'', ``$fcc-save-hook'', and ** ``$index-format-hook''. ** .pp ** They are also supported in the configuration variables $$attribution, ** $$forward_attribution_intro, $$forward_attribution_trailer, ** $$forward_format, $$indent_string, $$message_format, $$pager_format, ** and $$post_indent_string. */ { "ispell", DT_PATH, R_NONE, {.p=&Ispell}, {.p=ISPELL} }, /* ** .pp ** How to invoke ispell (GNU's spell-checking software). */ { "keep_flagged", DT_BOOL, R_NONE, {.l=OPTKEEPFLAGGED}, {.l=0} }, /* ** .pp ** If \fIset\fP, read messages marked as flagged will not be moved ** from your spool mailbox to your $$mbox mailbox, or as a result of ** a ``$mbox-hook'' command. */ { "mail_check", DT_NUM, R_NONE, {.p=&BuffyTimeout}, {.l=5} }, /* ** .pp ** This variable configures how often (in seconds) mutt should look for ** new mail. Also see the $$timeout variable. */ { "mail_check_recent",DT_BOOL, R_NONE, {.l=OPTMAILCHECKRECENT}, {.l=1} }, /* ** .pp ** When \fIset\fP, Mutt will only notify you about new mail that has been received ** since the last time you opened the mailbox. When \fIunset\fP, Mutt will notify you ** if any new mail exists in the mailbox, regardless of whether you have visited it ** recently. ** .pp ** When \fI$$mark_old\fP is set, Mutt does not consider the mailbox to contain new ** mail if only old messages exist. */ { "mail_check_stats", DT_BOOL, R_NONE, {.l=OPTMAILCHECKSTATS}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt will periodically calculate message ** statistics of a mailbox while polling for new mail. It will ** check for unread, flagged, and total message counts. Because ** this operation is more performance intensive, it defaults to ** \fIunset\fP, and has a separate option, $$mail_check_stats_interval, to ** control how often to update these counts. ** .pp ** Message statistics can also be explicitly calculated by invoking the ** \fC\fP ** function. */ { "mail_check_stats_interval", DT_NUM, R_NONE, {.p=&BuffyCheckStatsInterval}, {.l=60} }, /* ** .pp ** When $$mail_check_stats is \fIset\fP, this variable configures ** how often (in seconds) mutt will update message counts. */ { "mailcap_path", DT_STR, R_NONE, {.p=&MailcapPath}, {.p=0} }, /* ** .pp ** This variable specifies which files to consult when attempting to ** display MIME bodies not directly supported by Mutt. The default value ** is generated during startup: see the ``$mailcap'' section of the manual. */ { "mailcap_sanitize", DT_BOOL, R_NONE, {.l=OPTMAILCAPSANITIZE}, {.l=1} }, /* ** .pp ** If \fIset\fP, mutt will restrict possible characters in mailcap % expandos ** to a well-defined set of safe characters. This is the safe setting, ** but we are not sure it doesn't break some more advanced MIME stuff. ** .pp ** \fBDON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE ** DOING!\fP */ #ifdef USE_HCACHE { "maildir_header_cache_verify", DT_BOOL, R_NONE, {.l=OPTHCACHEVERIFY}, {.l=1} }, /* ** .pp ** Check for Maildir unaware programs other than mutt having modified maildir ** files when the header cache is in use. This incurs one \fCstat(2)\fP per ** message every time the folder is opened (which can be very slow for NFS ** folders). */ #endif { "maildir_trash", DT_BOOL, R_NONE, {.l=OPTMAILDIRTRASH}, {.l=0} }, /* ** .pp ** If \fIset\fP, messages marked as deleted will be saved with the maildir ** trashed flag instead of unlinked. \fBNote:\fP this only applies ** to maildir-style mailboxes. Setting it will have no effect on other ** mailbox types. */ { "maildir_check_cur", DT_BOOL, R_NONE, {.l=OPTMAILDIRCHECKCUR}, {.l=0} }, /* ** .pp ** If \fIset\fP, mutt will poll both the new and cur directories of ** a maildir folder for new messages. This might be useful if other ** programs interacting with the folder (e.g. dovecot) are moving new ** messages to the cur directory. Note that setting this option may ** slow down polling for new messages in large folders, since mutt has ** to scan all cur messages. */ { "mark_macro_prefix",DT_STR, R_NONE, {.p=&MarkMacroPrefix}, {.p="'"} }, /* ** .pp ** Prefix for macros created using mark-message. A new macro ** automatically generated with \fIa\fP will be composed ** from this prefix and the letter \fIa\fP. */ { "mark_old", DT_BOOL, R_BOTH, {.l=OPTMARKOLD}, {.l=1} }, /* ** .pp ** Controls whether or not mutt marks \fInew\fP \fBunread\fP ** messages as \fIold\fP if you exit a mailbox without reading them. ** With this option \fIset\fP, the next time you start mutt, the messages ** will show up with an ``O'' next to them in the index menu, ** indicating that they are old. */ { "markers", DT_BOOL, R_PAGER_FLOW, {.l=OPTMARKERS}, {.l=1} }, /* ** .pp ** Controls the display of wrapped lines in the internal pager. If set, a ** ``+'' marker is displayed at the beginning of wrapped lines. ** .pp ** Also see the $$smart_wrap variable. */ { "mask", DT_RX, R_NONE, {.p=&Mask}, {.p="!^\\.[^.]"} }, /* ** .pp ** A regular expression used in the file browser, optionally preceded by ** the \fInot\fP operator ``!''. Only files whose names match this mask ** will be shown. The match is always case-sensitive. */ { "mbox", DT_PATH, R_BOTH, {.p=&Inbox}, {.p="~/mbox"} }, /* ** .pp ** This specifies the folder into which read mail in your $$spoolfile ** folder will be appended. ** .pp ** Also see the $$move variable. */ { "mbox_type", DT_MAGIC,R_NONE, {.p=&DefaultMagic}, {.l=MUTT_MBOX} }, /* ** .pp ** The default mailbox type used when creating new folders. May be any of ** ``mbox'', ``MMDF'', ``MH'' and ``Maildir''. This is overridden by the ** \fC-m\fP command-line option. */ { "menu_context", DT_NUM, R_NONE, {.p=&MenuContext}, {.l=0} }, /* ** .pp ** This variable controls the number of lines of context that are given ** when scrolling through menus. (Similar to $$pager_context.) */ { "menu_move_off", DT_BOOL, R_NONE, {.l=OPTMENUMOVEOFF}, {.l=1} }, /* ** .pp ** When \fIunset\fP, the bottom entry of menus will never scroll up past ** the bottom of the screen, unless there are less entries than lines. ** When \fIset\fP, the bottom entry may move off the bottom. */ { "menu_scroll", DT_BOOL, R_NONE, {.l=OPTMENUSCROLL}, {.l=0} }, /* ** .pp ** When \fIset\fP, menus will be scrolled up or down one line when you ** attempt to move across a screen boundary. If \fIunset\fP, the screen ** is cleared and the next or previous page of the menu is displayed ** (useful for slow links to avoid many redraws). */ #if defined(USE_IMAP) || defined(USE_POP) { "message_cache_clean", DT_BOOL, R_NONE, {.l=OPTMESSAGECACHECLEAN}, {.l=0} }, /* ** .pp ** If \fIset\fP, mutt will clean out obsolete entries from the message cache when ** the mailbox is synchronized. You probably only want to set it ** every once in a while, since it can be a little slow ** (especially for large folders). */ { "message_cachedir", DT_PATH, R_NONE, {.p=&MessageCachedir}, {.p=0} }, /* ** .pp ** Set this to a directory and mutt will cache copies of messages from ** your IMAP and POP servers here. You are free to remove entries at any ** time. ** .pp ** When setting this variable to a directory, mutt needs to fetch every ** remote message only once and can perform regular expression searches ** as fast as for local folders. ** .pp ** Also see the $$message_cache_clean variable. */ #endif { "message_format", DT_STR, R_NONE, {.p=&MsgFmt}, {.p="%s"} }, /* ** .pp ** This is the string displayed in the ``attachment'' menu for ** attachments of type \fCmessage/rfc822\fP. For a full listing of defined ** \fCprintf(3)\fP-like sequences see the section on $$index_format. */ { "msg_format", DT_SYN, R_NONE, {.p="message_format"}, {.p=0} }, /* */ { "meta_key", DT_BOOL, R_NONE, {.l=OPTMETAKEY}, {.l=0} }, /* ** .pp ** If \fIset\fP, forces Mutt to interpret keystrokes with the high bit (bit 8) ** set as if the user had pressed the Esc key and whatever key remains ** after having the high bit removed. For example, if the key pressed ** has an ASCII value of \fC0xf8\fP, then this is treated as if the user had ** pressed Esc then ``x''. This is because the result of removing the ** high bit from \fC0xf8\fP is \fC0x78\fP, which is the ASCII character ** ``x''. */ { "metoo", DT_BOOL, R_NONE, {.l=OPTMETOO}, {.l=0} }, /* ** .pp ** If \fIunset\fP, Mutt will remove your address (see the ``$alternates'' ** command) from the list of recipients when replying to a message. */ { "mh_purge", DT_BOOL, R_NONE, {.l=OPTMHPURGE}, {.l=0} }, /* ** .pp ** When \fIunset\fP, mutt will mimic mh's behavior and rename deleted messages ** to \fI,\fP in mh folders instead of really deleting ** them. This leaves the message on disk but makes programs reading the folder ** ignore it. If the variable is \fIset\fP, the message files will simply be ** deleted. ** .pp ** This option is similar to $$maildir_trash for Maildir folders. */ { "mh_seq_flagged", DT_STR, R_NONE, {.p=&MhFlagged}, {.p="flagged"} }, /* ** .pp ** The name of the MH sequence used for flagged messages. */ { "mh_seq_replied", DT_STR, R_NONE, {.p=&MhReplied}, {.p="replied"} }, /* ** .pp ** The name of the MH sequence used to tag replied messages. */ { "mh_seq_unseen", DT_STR, R_NONE, {.p=&MhUnseen}, {.p="unseen"} }, /* ** .pp ** The name of the MH sequence used for unseen messages. */ { "mime_forward", DT_QUAD, R_NONE, {.l=OPT_MIMEFWD}, {.l=MUTT_NO} }, /* ** .pp ** When \fIset\fP, the message you are forwarding will be attached as a ** separate \fCmessage/rfc822\fP MIME part instead of included in the main body of the ** message. This is useful for forwarding MIME messages so the receiver ** can properly view the message as it was delivered to you. If you like ** to switch between MIME and not MIME from mail to mail, set this ** variable to ``ask-no'' or ``ask-yes''. ** .pp ** Also see $$forward_decode and $$mime_forward_decode. */ { "mime_forward_decode", DT_BOOL, R_NONE, {.l=OPTMIMEFORWDECODE}, {.l=0} }, /* ** .pp ** Controls the decoding of complex MIME messages into \fCtext/plain\fP when ** forwarding a message while $$mime_forward is \fIset\fP. Otherwise ** $$forward_decode is used instead. */ { "mime_fwd", DT_SYN, R_NONE, {.p="mime_forward"}, {.p=0} }, /* */ { "mime_forward_rest", DT_QUAD, R_NONE, {.l=OPT_MIMEFWDREST}, {.l=MUTT_YES} }, /* ** .pp ** When forwarding multiple attachments of a MIME message from the attachment ** menu, attachments which cannot be decoded in a reasonable manner will ** be attached to the newly composed message if this option is \fIset\fP. */ { "mime_type_query_command", DT_STR, R_NONE, {.p=&MimeTypeQueryCmd}, {.p=0} }, /* ** .pp ** This specifies a command to run, to determine the mime type of a ** new attachment when composing a message. Unless ** $$mime_type_query_first is set, this will only be run if the ** attachment's extension is not found in the mime.types file. ** .pp ** The string may contain a ``%s'', which will be substituted with the ** attachment filename. Mutt will add quotes around the string substituted ** for ``%s'' automatically according to shell quoting rules, so you should ** avoid adding your own. If no ``%s'' is found in the string, Mutt will ** append the attachment filename to the end of the string. ** .pp ** The command should output a single line containing the ** attachment's mime type. ** .pp ** Suggested values are ``xdg-mime query filetype'' or ** ``file -bi''. */ { "mime_type_query_first", DT_BOOL, R_NONE, {.l=OPTMIMETYPEQUERYFIRST}, {.l=0} }, /* ** .pp ** When \fIset\fP, the $$mime_type_query_command will be run before the ** mime.types lookup. */ #ifdef MIXMASTER { "mix_entry_format", DT_STR, R_NONE, {.p=&MixEntryFormat}, {.p="%4n %c %-16s %a"} }, /* ** .pp ** This variable describes the format of a remailer line on the mixmaster ** chain selection screen. The following \fCprintf(3)\fP-like sequences are ** supported: ** .dl ** .dt %n .dd The running number on the menu. ** .dt %c .dd Remailer capabilities. ** .dt %s .dd The remailer's short name. ** .dt %a .dd The remailer's e-mail address. ** .de */ { "mixmaster", DT_PATH, R_NONE, {.p=&Mixmaster}, {.p=MIXMASTER} }, /* ** .pp ** This variable contains the path to the Mixmaster binary on your ** system. It is used with various sets of parameters to gather the ** list of known remailers, and to finally send a message through the ** mixmaster chain. */ #endif { "move", DT_QUAD, R_NONE, {.l=OPT_MOVE}, {.l=MUTT_NO} }, /* ** .pp ** Controls whether or not Mutt will move read messages ** from your spool mailbox to your $$mbox mailbox, or as a result of ** a ``$mbox-hook'' command. */ { "narrow_tree", DT_BOOL, R_TREE|R_INDEX, {.l=OPTNARROWTREE}, {.l=0} }, /* ** .pp ** This variable, when \fIset\fP, makes the thread tree narrower, allowing ** deeper threads to fit on the screen. */ #ifdef USE_SOCKET { "net_inc", DT_NUM, R_NONE, {.p=&NetInc}, {.l=10} }, /* ** .pp ** Operations that expect to transfer a large amount of data over the ** network will update their progress every $$net_inc kilobytes. ** If set to 0, no progress messages will be displayed. ** .pp ** See also $$read_inc, $$write_inc and $$net_inc. */ #endif { "new_mail_command", DT_PATH, R_NONE, {.p=&NewMailCmd}, {.p=0} }, /* ** .pp ** If \fIset\fP, Mutt will call this command after a new message is received. ** See the $$status_format documentation for the values that can be formatted ** into this command. */ { "pager", DT_PATH, R_NONE, {.p=&Pager}, {.p="builtin"} }, /* ** .pp ** This variable specifies which pager you would like to use to view ** messages. The value ``builtin'' means to use the built-in pager, otherwise this ** variable should specify the pathname of the external pager you would ** like to use. ** .pp ** Using an external pager may have some disadvantages: Additional ** keystrokes are necessary because you can't call mutt functions ** directly from the pager, and screen resizes cause lines longer than ** the screen width to be badly formatted in the help menu. ** .pp ** When using an external pager, also see $$prompt_after which defaults ** \fIset\fP. */ { "pager_context", DT_NUM, R_NONE, {.p=&PagerContext}, {.l=0} }, /* ** .pp ** This variable controls the number of lines of context that are given ** when displaying the next or previous page in the internal pager. By ** default, Mutt will display the line after the last one on the screen ** at the top of the next page (0 lines of context). ** .pp ** This variable also specifies the amount of context given for search ** results. If positive, this many lines will be given before a match, ** if 0, the match will be top-aligned. */ { "pager_format", DT_STR, R_PAGER, {.p=&PagerFmt}, {.p="-%Z- %C/%m: %-20.20n %s%* -- (%P)"} }, /* ** .pp ** This variable controls the format of the one-line message ``status'' ** displayed before each message in either the internal or an external ** pager. The valid sequences are listed in the $$index_format ** section. */ { "pager_index_lines",DT_NUM, R_PAGER, {.p=&PagerIndexLines}, {.l=0} }, /* ** .pp ** Determines the number of lines of a mini-index which is shown when in ** the pager. The current message, unless near the top or bottom of the ** folder, will be roughly one third of the way down this mini-index, ** giving the reader the context of a few messages before and after the ** message. This is useful, for example, to determine how many messages ** remain to be read in the current thread. One of the lines is reserved ** for the status bar from the index, so a setting of 6 ** will only show 5 lines of the actual index. A value of 0 results in ** no index being shown. If the number of messages in the current folder ** is less than $$pager_index_lines, then the index will only use as ** many lines as it needs. */ { "pager_stop", DT_BOOL, R_NONE, {.l=OPTPAGERSTOP}, {.l=0} }, /* ** .pp ** When \fIset\fP, the internal-pager will \fBnot\fP move to the next message ** when you are at the end of a message and invoke the \fC\fP ** function. */ { "pgp_auto_decode", DT_BOOL, R_NONE, {.l=OPTPGPAUTODEC}, {.l=0} }, /* ** .pp ** If \fIset\fP, mutt will automatically attempt to decrypt traditional PGP ** messages whenever the user performs an operation which ordinarily would ** result in the contents of the message being operated on. For example, ** if the user displays a pgp-traditional message which has not been manually ** checked with the \fC$\fP function, mutt will automatically ** check the message for traditional pgp. */ { "pgp_create_traditional", DT_SYN, R_NONE, {.p="pgp_autoinline"}, {.p=0} }, { "pgp_autoinline", DT_BOOL, R_NONE, {.l=OPTPGPAUTOINLINE}, {.l=0} }, /* ** .pp ** This option controls whether Mutt generates old-style inline ** (traditional) PGP encrypted or signed messages under certain ** circumstances. This can be overridden by use of the pgp menu, ** when inline is not required. The GPGME backend does not support ** this option. ** .pp ** Note that Mutt might automatically use PGP/MIME for messages ** which consist of more than a single MIME part. Mutt can be ** configured to ask before sending PGP/MIME messages when inline ** (traditional) would not work. ** .pp ** Also see the $$pgp_mime_auto variable. ** .pp ** Also note that using the old-style PGP message format is \fBstrongly\fP ** \fBdeprecated\fP. ** (PGP only) */ { "pgp_check_exit", DT_BOOL, R_NONE, {.l=OPTPGPCHECKEXIT}, {.l=1} }, /* ** .pp ** If \fIset\fP, mutt will check the exit code of the PGP subprocess when ** signing or encrypting. A non-zero exit code means that the ** subprocess failed. ** (PGP only) */ { "pgp_check_gpg_decrypt_status_fd", DT_BOOL, R_NONE, {.l=OPTPGPCHECKGPGDECRYPTSTATUSFD}, {.l=1} }, /* ** .pp ** If \fIset\fP, mutt will check the status file descriptor output ** of $$pgp_decrypt_command and $$pgp_decode_command for GnuPG status codes ** indicating successful decryption. This will check for the presence of ** DECRYPTION_OKAY, absence of DECRYPTION_FAILED, and that all ** PLAINTEXT occurs between the BEGIN_DECRYPTION and END_DECRYPTION ** status codes. ** .pp ** If \fIunset\fP, mutt will instead match the status fd output ** against $$pgp_decryption_okay. ** (PGP only) */ { "pgp_clearsign_command", DT_STR, R_NONE, {.p=&PgpClearSignCommand}, {.p=0} }, /* ** .pp ** This format is used to create an old-style ``clearsigned'' PGP ** message. Note that the use of this format is \fBstrongly\fP ** \fBdeprecated\fP. ** .pp ** This is a format string, see the $$pgp_decode_command command for ** possible \fCprintf(3)\fP-like sequences. ** (PGP only) */ { "pgp_decode_command", DT_STR, R_NONE, {.p=&PgpDecodeCommand}, {.p=0} }, /* ** .pp ** This format strings specifies a command which is used to decode ** application/pgp attachments. ** .pp ** The PGP command formats have their own set of \fCprintf(3)\fP-like sequences: ** .dl ** .dt %p .dd Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty ** string otherwise. Note: This may be used with a %? construct. ** .dt %f .dd Expands to the name of a file containing a message. ** .dt %s .dd Expands to the name of a file containing the signature part ** . of a \fCmultipart/signed\fP attachment when verifying it. ** .dt %a .dd The value of $$pgp_sign_as if set, otherwise the value ** of $$pgp_default_key. ** .dt %r .dd One or more key IDs (or fingerprints if available). ** .de ** .pp ** For examples on how to configure these formats for the various versions ** of PGP which are floating around, see the pgp and gpg sample configuration files in ** the \fCsamples/\fP subdirectory which has been installed on your system ** alongside the documentation. ** (PGP only) */ { "pgp_decrypt_command", DT_STR, R_NONE, {.p=&PgpDecryptCommand}, {.p=0} }, /* ** .pp ** This command is used to decrypt a PGP encrypted message. ** .pp ** This is a format string, see the $$pgp_decode_command command for ** possible \fCprintf(3)\fP-like sequences. ** (PGP only) */ { "pgp_decryption_okay", DT_RX, R_NONE, {.p=&PgpDecryptionOkay}, {.p=0} }, /* ** .pp ** If you assign text to this variable, then an encrypted PGP ** message is only considered successfully decrypted if the output ** from $$pgp_decrypt_command contains the text. This is used to ** protect against a spoofed encrypted message, with multipart/encrypted ** headers but containing a block that is not actually encrypted. ** (e.g. simply signed and ascii armored text). ** .pp ** Note that if $$pgp_check_gpg_decrypt_status_fd is set, this variable ** is ignored. ** (PGP only) */ { "pgp_self_encrypt_as", DT_SYN, R_NONE, {.p="pgp_default_key"}, {.p=0} }, { "pgp_default_key", DT_STR, R_NONE, {.p=&PgpDefaultKey}, {.p=0} }, /* ** .pp ** This is the default key-pair to use for PGP operations. It will be ** used for encryption (see $$postpone_encrypt and $$pgp_self_encrypt). ** .pp ** It will also be used for signing unless $$pgp_sign_as is set. ** .pp ** The (now deprecated) \fIpgp_self_encrypt_as\fP is an alias for this ** variable, and should no longer be used. ** (PGP only) */ { "pgp_encrypt_only_command", DT_STR, R_NONE, {.p=&PgpEncryptOnlyCommand}, {.p=0} }, /* ** .pp ** This command is used to encrypt a body part without signing it. ** .pp ** This is a format string, see the $$pgp_decode_command command for ** possible \fCprintf(3)\fP-like sequences. ** (PGP only) */ { "pgp_encrypt_sign_command", DT_STR, R_NONE, {.p=&PgpEncryptSignCommand}, {.p=0} }, /* ** .pp ** This command is used to both sign and encrypt a body part. ** .pp ** This is a format string, see the $$pgp_decode_command command for ** possible \fCprintf(3)\fP-like sequences. ** (PGP only) */ { "pgp_entry_format", DT_STR, R_NONE, {.p=&PgpEntryFormat}, {.p="%4n %t%f %4l/0x%k %-4a %2c %u"} }, /* ** .pp ** This variable allows you to customize the PGP key selection menu to ** your personal taste. This string is similar to $$index_format, but ** has its own set of \fCprintf(3)\fP-like sequences: ** .dl ** .dt %n .dd number ** .dt %k .dd key id ** .dt %u .dd user id ** .dt %a .dd algorithm ** .dt %l .dd key length ** .dt %f .dd flags ** .dt %c .dd capabilities ** .dt %t .dd trust/validity of the key-uid association ** .dt %[] .dd date of the key where is an \fCstrftime(3)\fP expression ** .de ** .pp ** (PGP only) */ { "pgp_export_command", DT_STR, R_NONE, {.p=&PgpExportCommand}, {.p=0} }, /* ** .pp ** This command is used to export a public key from the user's ** key ring. ** .pp ** This is a format string, see the $$pgp_decode_command command for ** possible \fCprintf(3)\fP-like sequences. ** (PGP only) */ { "pgp_getkeys_command", DT_STR, R_NONE, {.p=&PgpGetkeysCommand}, {.p=0} }, /* ** .pp ** This command is invoked whenever Mutt needs to fetch the public key associated with ** an email address. Of the sequences supported by $$pgp_decode_command, %r is ** the only \fCprintf(3)\fP-like sequence used with this format. Note that ** in this case, %r expands to the email address, not the public key ID (the key ID is ** unknown, which is why Mutt is invoking this command). ** (PGP only) */ { "pgp_good_sign", DT_RX, R_NONE, {.p=&PgpGoodSign}, {.p=0} }, /* ** .pp ** If you assign a text to this variable, then a PGP signature is only ** considered verified if the output from $$pgp_verify_command contains ** the text. Use this variable if the exit code from the command is 0 ** even for bad signatures. ** (PGP only) */ { "pgp_ignore_subkeys", DT_BOOL, R_NONE, {.l=OPTPGPIGNORESUB}, {.l=1} }, /* ** .pp ** Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, ** the principal key will inherit the subkeys' capabilities. \fIUnset\fP this ** if you want to play interesting key selection games. ** (PGP only) */ { "pgp_import_command", DT_STR, R_NONE, {.p=&PgpImportCommand}, {.p=0} }, /* ** .pp ** This command is used to import a key from a message into ** the user's public key ring. ** .pp ** This is a format string, see the $$pgp_decode_command command for ** possible \fCprintf(3)\fP-like sequences. ** (PGP only) */ { "pgp_list_pubring_command", DT_STR, R_NONE, {.p=&PgpListPubringCommand}, {.p=0} }, /* ** .pp ** This command is used to list the public key ring's contents. The ** output format must be analogous to the one used by ** .ts ** gpg --list-keys --with-colons --with-fingerprint ** .te ** .pp ** This format is also generated by the \fCmutt_pgpring\fP utility which comes ** with mutt. ** .pp ** Note: gpg's \fCfixed-list-mode\fP option should not be used. It ** produces a different date format which may result in mutt showing ** incorrect key generation dates. ** .pp ** This is a format string, see the $$pgp_decode_command command for ** possible \fCprintf(3)\fP-like sequences. ** Note that in this case, %r expands to the search string, which is a list of ** one or more quoted values such as email address, name, or keyid. ** (PGP only) */ { "pgp_list_secring_command", DT_STR, R_NONE, {.p=&PgpListSecringCommand}, {.p=0} }, /* ** .pp ** This command is used to list the secret key ring's contents. The ** output format must be analogous to the one used by: ** .ts ** gpg --list-keys --with-colons --with-fingerprint ** .te ** .pp ** This format is also generated by the \fCmutt_pgpring\fP utility which comes ** with mutt. ** .pp ** Note: gpg's \fCfixed-list-mode\fP option should not be used. It ** produces a different date format which may result in mutt showing ** incorrect key generation dates. ** .pp ** This is a format string, see the $$pgp_decode_command command for ** possible \fCprintf(3)\fP-like sequences. ** Note that in this case, %r expands to the search string, which is a list of ** one or more quoted values such as email address, name, or keyid. ** (PGP only) */ { "pgp_long_ids", DT_BOOL, R_NONE, {.l=OPTPGPLONGIDS}, {.l=1} }, /* ** .pp ** If \fIset\fP, use 64 bit PGP key IDs, if \fIunset\fP use the normal 32 bit key IDs. ** NOTE: Internally, Mutt has transitioned to using fingerprints (or long key IDs ** as a fallback). This option now only controls the display of key IDs ** in the key selection menu and a few other places. ** (PGP only) */ { "pgp_mime_auto", DT_QUAD, R_NONE, {.l=OPT_PGPMIMEAUTO}, {.l=MUTT_ASKYES} }, /* ** .pp ** This option controls whether Mutt will prompt you for ** automatically sending a (signed/encrypted) message using ** PGP/MIME when inline (traditional) fails (for any reason). ** .pp ** Also note that using the old-style PGP message format is \fBstrongly\fP ** \fBdeprecated\fP. ** (PGP only) */ { "pgp_auto_traditional", DT_SYN, R_NONE, {.p="pgp_replyinline"}, {.p=0} }, { "pgp_replyinline", DT_BOOL, R_NONE, {.l=OPTPGPREPLYINLINE}, {.l=0} }, /* ** .pp ** Setting this variable will cause Mutt to always attempt to ** create an inline (traditional) message when replying to a ** message which is PGP encrypted/signed inline. This can be ** overridden by use of the pgp menu, when inline is not ** required. This option does not automatically detect if the ** (replied-to) message is inline; instead it relies on Mutt ** internals for previously checked/flagged messages. ** .pp ** Note that Mutt might automatically use PGP/MIME for messages ** which consist of more than a single MIME part. Mutt can be ** configured to ask before sending PGP/MIME messages when inline ** (traditional) would not work. ** .pp ** Also see the $$pgp_mime_auto variable. ** .pp ** Also note that using the old-style PGP message format is \fBstrongly\fP ** \fBdeprecated\fP. ** (PGP only) ** */ { "pgp_retainable_sigs", DT_BOOL, R_NONE, {.l=OPTPGPRETAINABLESIG}, {.l=0} }, /* ** .pp ** If \fIset\fP, signed and encrypted messages will consist of nested ** \fCmultipart/signed\fP and \fCmultipart/encrypted\fP body parts. ** .pp ** This is useful for applications like encrypted and signed mailing ** lists, where the outer layer (\fCmultipart/encrypted\fP) can be easily ** removed, while the inner \fCmultipart/signed\fP part is retained. ** (PGP only) */ { "pgp_self_encrypt", DT_BOOL, R_NONE, {.l=OPTPGPSELFENCRYPT}, {.l=1} }, /* ** .pp ** When \fIset\fP, PGP encrypted messages will also be encrypted ** using the key in $$pgp_default_key. ** (PGP only) */ { "pgp_show_unusable", DT_BOOL, R_NONE, {.l=OPTPGPSHOWUNUSABLE}, {.l=1} }, /* ** .pp ** If \fIset\fP, mutt will display non-usable keys on the PGP key selection ** menu. This includes keys which have been revoked, have expired, or ** have been marked as ``disabled'' by the user. ** (PGP only) */ { "pgp_sign_as", DT_STR, R_NONE, {.p=&PgpSignAs}, {.p=0} }, /* ** .pp ** If you have a different key pair to use for signing, you should ** set this to the signing key. Most people will only need to set ** $$pgp_default_key. It is recommended that you use the keyid form ** to specify your key (e.g. \fC0x00112233\fP). ** (PGP only) */ { "pgp_sign_command", DT_STR, R_NONE, {.p=&PgpSignCommand}, {.p=0} }, /* ** .pp ** This command is used to create the detached PGP signature for a ** \fCmultipart/signed\fP PGP/MIME body part. ** .pp ** This is a format string, see the $$pgp_decode_command command for ** possible \fCprintf(3)\fP-like sequences. ** (PGP only) */ { "pgp_sort_keys", DT_SORT|DT_SORT_KEYS, R_NONE, {.p=&PgpSortKeys}, {.l=SORT_ADDRESS} }, /* ** .pp ** Specifies how the entries in the pgp menu are sorted. The ** following are legal values: ** .dl ** .dt address .dd sort alphabetically by user id ** .dt keyid .dd sort alphabetically by key id ** .dt date .dd sort by key creation date ** .dt trust .dd sort by the trust of the key ** .de ** .pp ** If you prefer reverse order of the above values, prefix it with ** ``reverse-''. ** (PGP only) */ { "pgp_strict_enc", DT_BOOL, R_NONE, {.l=OPTPGPSTRICTENC}, {.l=1} }, /* ** .pp ** If \fIset\fP, Mutt will automatically encode PGP/MIME signed messages as ** quoted-printable. Please note that unsetting this variable may ** lead to problems with non-verifyable PGP signatures, so only change ** this if you know what you are doing. ** (PGP only) */ { "pgp_timeout", DT_LNUM, R_NONE, {.p=&PgpTimeout}, {.l=300} }, /* ** .pp ** The number of seconds after which a cached passphrase will expire if ** not used. ** (PGP only) */ { "pgp_use_gpg_agent", DT_BOOL, R_NONE, {.l=OPTUSEGPGAGENT}, {.l=1} }, /* ** .pp ** If \fIset\fP, mutt expects a \fCgpg-agent(1)\fP process will handle ** private key passphrase prompts. If \fIunset\fP, mutt will prompt ** for the passphrase and pass it via stdin to the pgp command. ** .pp ** Note that as of version 2.1, GnuPG automatically spawns an agent ** and requires the agent be used for passphrase management. Since ** that version is increasingly prevalent, this variable now ** defaults \fIset\fP. ** .pp ** Mutt works with a GUI or curses pinentry program. A TTY pinentry ** should not be used. ** .pp ** If you are using an older version of GnuPG without an agent running, ** or another encryption program without an agent, you will need to ** \fIunset\fP this variable. ** (PGP only) */ { "pgp_verify_command", DT_STR, R_NONE, {.p=&PgpVerifyCommand}, {.p=0} }, /* ** .pp ** This command is used to verify PGP signatures. ** .pp ** This is a format string, see the $$pgp_decode_command command for ** possible \fCprintf(3)\fP-like sequences. ** (PGP only) */ { "pgp_verify_key_command", DT_STR, R_NONE, {.p=&PgpVerifyKeyCommand}, {.p=0} }, /* ** .pp ** This command is used to verify key information from the key selection ** menu. ** .pp ** This is a format string, see the $$pgp_decode_command command for ** possible \fCprintf(3)\fP-like sequences. ** (PGP only) */ { "pipe_decode", DT_BOOL, R_NONE, {.l=OPTPIPEDECODE}, {.l=0} }, /* ** .pp ** Used in connection with the \fC\fP command. When \fIunset\fP, ** Mutt will pipe the messages without any preprocessing. When \fIset\fP, Mutt ** will weed headers and will attempt to decode the messages ** first. */ { "pipe_sep", DT_STR, R_NONE, {.p=&PipeSep}, {.p="\n"} }, /* ** .pp ** The separator to add between messages when piping a list of tagged ** messages to an external Unix command. */ { "pipe_split", DT_BOOL, R_NONE, {.l=OPTPIPESPLIT}, {.l=0} }, /* ** .pp ** Used in connection with the \fC\fP function following ** \fC\fP. If this variable is \fIunset\fP, when piping a list of ** tagged messages Mutt will concatenate the messages and will pipe them ** all concatenated. When \fIset\fP, Mutt will pipe the messages one by one. ** In both cases the messages are piped in the current sorted order, ** and the $$pipe_sep separator is added after each message. */ #ifdef USE_POP { "pop_auth_try_all", DT_BOOL, R_NONE, {.l=OPTPOPAUTHTRYALL}, {.l=1} }, /* ** .pp ** If \fIset\fP, Mutt will try all available authentication methods. ** When \fIunset\fP, Mutt will only fall back to other authentication ** methods if the previous methods are unavailable. If a method is ** available but authentication fails, Mutt will not connect to the POP server. */ { "pop_authenticators", DT_STR, R_NONE, {.p=&PopAuthenticators}, {.p=0} }, /* ** .pp ** This is a colon-delimited list of authentication methods mutt may ** attempt to use to log in to an POP server, in the order mutt should ** try them. Authentication methods are either ``user'', ``apop'' or any ** SASL mechanism, e.g. ``digest-md5'', ``gssapi'' or ``cram-md5''. ** This option is case-insensitive. If this option is \fIunset\fP ** (the default) mutt will try all available methods, in order from ** most-secure to least-secure. ** .pp ** Example: ** .ts ** set pop_authenticators="digest-md5:apop:user" ** .te */ { "pop_checkinterval", DT_NUM, R_NONE, {.p=&PopCheckTimeout}, {.l=60} }, /* ** .pp ** This variable configures how often (in seconds) mutt should look for ** new mail in the currently selected mailbox if it is a POP mailbox. */ { "pop_delete", DT_QUAD, R_NONE, {.l=OPT_POPDELETE}, {.l=MUTT_ASKNO} }, /* ** .pp ** If \fIset\fP, Mutt will delete successfully downloaded messages from the POP ** server when using the \fC$\fP function. When \fIunset\fP, Mutt will ** download messages but also leave them on the POP server. */ { "pop_host", DT_STR, R_NONE, {.p=&PopHost}, {.p=0} }, /* ** .pp ** The name of your POP server for the \fC$\fP function. You ** can also specify an alternative port, username and password, i.e.: ** .ts ** [pop[s]://][username[:password]@]popserver[:port] ** .te ** .pp ** where ``[...]'' denotes an optional part. */ { "pop_last", DT_BOOL, R_NONE, {.l=OPTPOPLAST}, {.l=0} }, /* ** .pp ** If this variable is \fIset\fP, mutt will try to use the ``\fCLAST\fP'' POP command ** for retrieving only unread messages from the POP server when using ** the \fC$\fP function. */ { "pop_oauth_refresh_command", DT_STR, R_NONE, {.p=&PopOauthRefreshCmd}, {.p=0} }, /* ** .pp ** The command to run to generate an OAUTH refresh token for ** authorizing your connection to your POP server. This command will be ** run on every connection attempt that uses the OAUTHBEARER authentication ** mechanism. See ``$oauth'' for details. */ { "pop_pass", DT_STR, R_NONE, {.p=&PopPass}, {.p=0} }, /* ** .pp ** Specifies the password for your POP account. If \fIunset\fP, Mutt will ** prompt you for your password when you open a POP mailbox. ** .pp ** \fBWarning\fP: you should only use this option when you are on a ** fairly secure machine, because the superuser can read your muttrc ** even if you are the only one who can read the file. */ { "pop_reconnect", DT_QUAD, R_NONE, {.l=OPT_POPRECONNECT}, {.l=MUTT_ASKYES} }, /* ** .pp ** Controls whether or not Mutt will try to reconnect to the POP server if ** the connection is lost. */ { "pop_user", DT_STR, R_NONE, {.p=&PopUser}, {.p=0} }, /* ** .pp ** Your login name on the POP server. ** .pp ** This variable defaults to your user name on the local machine. */ #endif /* USE_POP */ { "post_indent_string",DT_STR, R_NONE, {.p=&PostIndentString}, {.p=0} }, /* ** .pp ** Similar to the $$attribution variable, Mutt will append this ** string after the inclusion of a message which is being replied to. ** For a full listing of defined \fCprintf(3)\fP-like sequences see ** the section on $$index_format. */ { "post_indent_str", DT_SYN, R_NONE, {.p="post_indent_string"}, {.p=0} }, /* */ { "postpone", DT_QUAD, R_NONE, {.l=OPT_POSTPONE}, {.l=MUTT_ASKYES} }, /* ** .pp ** Controls whether or not messages are saved in the $$postponed ** mailbox when you elect not to send immediately. ** .pp ** Also see the $$recall variable. */ { "postponed", DT_PATH, R_INDEX, {.p=&Postponed}, {.p="~/postponed"} }, /* ** .pp ** Mutt allows you to indefinitely ``$postpone sending a message'' which ** you are editing. When you choose to postpone a message, Mutt saves it ** in the mailbox specified by this variable. ** .pp ** Also see the $$postpone variable. */ { "postpone_encrypt", DT_BOOL, R_NONE, {.l=OPTPOSTPONEENCRYPT}, {.l=0} }, /* ** .pp ** When \fIset\fP, postponed messages that are marked for encryption will be ** self-encrypted. Mutt will first try to encrypt using the value specified ** in $$pgp_default_key or $$smime_default_key. If those are not ** set, it will try the deprecated $$postpone_encrypt_as. ** (Crypto only) */ { "postpone_encrypt_as", DT_STR, R_NONE, {.p=&PostponeEncryptAs}, {.p=0} }, /* ** .pp ** This is a deprecated fall-back variable for $$postpone_encrypt. ** Please use $$pgp_default_key or $$smime_default_key. ** (Crypto only) */ #ifdef USE_SOCKET { "preconnect", DT_STR, R_NONE, {.p=&Preconnect}, {.p=0} }, /* ** .pp ** If \fIset\fP, a shell command to be executed if mutt fails to establish ** a connection to the server. This is useful for setting up secure ** connections, e.g. with \fCssh(1)\fP. If the command returns a nonzero ** status, mutt gives up opening the server. Example: ** .ts ** set preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net \(rs ** sleep 20 < /dev/null > /dev/null" ** .te ** .pp ** Mailbox ``foo'' on ``mailhost.net'' can now be reached ** as ``{localhost:1234}foo''. ** .pp ** Note: For this example to work, you must be able to log in to the ** remote machine without having to enter a password. */ #endif /* USE_SOCKET */ { "print", DT_QUAD, R_NONE, {.l=OPT_PRINT}, {.l=MUTT_ASKNO} }, /* ** .pp ** Controls whether or not Mutt really prints messages. ** This is set to ``ask-no'' by default, because some people ** accidentally hit ``p'' often. */ { "print_command", DT_PATH, R_NONE, {.p=&PrintCmd}, {.p="lpr"} }, /* ** .pp ** This specifies the command pipe that should be used to print messages. */ { "print_cmd", DT_SYN, R_NONE, {.p="print_command"}, {.p=0} }, /* */ { "print_decode", DT_BOOL, R_NONE, {.l=OPTPRINTDECODE}, {.l=1} }, /* ** .pp ** Used in connection with the \fC\fP command. If this ** option is \fIset\fP, the message is decoded before it is passed to the ** external command specified by $$print_command. If this option ** is \fIunset\fP, no processing will be applied to the message when ** printing it. The latter setting may be useful if you are using ** some advanced printer filter which is able to properly format ** e-mail messages for printing. */ { "print_split", DT_BOOL, R_NONE, {.l=OPTPRINTSPLIT}, {.l=0} }, /* ** .pp ** Used in connection with the \fC\fP command. If this option ** is \fIset\fP, the command specified by $$print_command is executed once for ** each message which is to be printed. If this option is \fIunset\fP, ** the command specified by $$print_command is executed only once, and ** all the messages are concatenated, with a form feed as the message ** separator. ** .pp ** Those who use the \fCenscript\fP(1) program's mail-printing mode will ** most likely want to \fIset\fP this option. */ { "prompt_after", DT_BOOL, R_NONE, {.l=OPTPROMPTAFTER}, {.l=1} }, /* ** .pp ** If you use an \fIexternal\fP $$pager, setting this variable will ** cause Mutt to prompt you for a command when the pager exits rather ** than returning to the index menu. If \fIunset\fP, Mutt will return to the ** index menu when the external pager exits. */ { "query_command", DT_PATH, R_NONE, {.p=&QueryCmd}, {.p=0} }, /* ** .pp ** This specifies the command Mutt will use to make external address ** queries. The string may contain a ``%s'', which will be substituted ** with the query string the user types. Mutt will add quotes around the ** string substituted for ``%s'' automatically according to shell quoting ** rules, so you should avoid adding your own. If no ``%s'' is found in ** the string, Mutt will append the user's query to the end of the string. ** See ``$query'' for more information. */ { "query_format", DT_STR, R_NONE, {.p=&QueryFormat}, {.p="%4c %t %-25.25a %-25.25n %?e?(%e)?"} }, /* ** .pp ** This variable describes the format of the ``query'' menu. The ** following \fCprintf(3)\fP-style sequences are understood: ** .dl ** .dt %a .dd destination address ** .dt %c .dd current entry number ** .dt %e .dd extra information * ** .dt %n .dd destination name ** .dt %t .dd ``*'' if current entry is tagged, a space otherwise ** .dt %>X .dd right justify the rest of the string and pad with ``X'' ** .dt %|X .dd pad to the end of the line with ``X'' ** .dt %*X .dd soft-fill with character ``X'' as pad ** .de ** .pp ** For an explanation of ``soft-fill'', see the $$index_format documentation. ** .pp ** * = can be optionally printed if nonzero, see the $$status_format documentation. */ { "quit", DT_QUAD, R_NONE, {.l=OPT_QUIT}, {.l=MUTT_YES} }, /* ** .pp ** This variable controls whether ``quit'' and ``exit'' actually quit ** from mutt. If this option is \fIset\fP, they do quit, if it is \fIunset\fP, they ** have no effect, and if it is set to \fIask-yes\fP or \fIask-no\fP, you are ** prompted for confirmation when you try to quit. */ { "quote_regexp", DT_RX, R_PAGER, {.p=&QuoteRegexp}, {.p="^([ \t]*[|>:}#])+"} }, /* ** .pp ** A regular expression used in the internal pager to determine quoted ** sections of text in the body of a message. Quoted text may be filtered ** out using the \fC\fP command, or colored according to the ** ``color quoted'' family of directives. ** .pp ** Higher levels of quoting may be colored differently (``color quoted1'', ** ``color quoted2'', etc.). The quoting level is determined by removing ** the last character from the matched text and recursively reapplying ** the regular expression until it fails to produce a match. ** .pp ** Match detection may be overridden by the $$smileys regular expression. */ { "read_inc", DT_NUM, R_NONE, {.p=&ReadInc}, {.l=10} }, /* ** .pp ** If set to a value greater than 0, Mutt will display which message it ** is currently on when reading a mailbox or when performing search actions ** such as search and limit. The message is printed after ** this many messages have been read or searched (e.g., if set to 25, Mutt will ** print a message when it is at message 25, and then again when it gets ** to message 50). This variable is meant to indicate progress when ** reading or searching large mailboxes which may take some time. ** When set to 0, only a single message will appear before the reading ** the mailbox. ** .pp ** Also see the $$write_inc, $$net_inc and $$time_inc variables and the ** ``$tuning'' section of the manual for performance considerations. */ { "read_only", DT_BOOL, R_NONE, {.l=OPTREADONLY}, {.l=0} }, /* ** .pp ** If \fIset\fP, all folders are opened in read-only mode. */ { "realname", DT_STR, R_BOTH, {.p=&Realname}, {.p=0} }, /* ** .pp ** This variable specifies what ``real'' or ``personal'' name should be used ** when sending messages. ** .pp ** By default, this is the GECOS field from \fC/etc/passwd\fP. Note that this ** variable will \fInot\fP be used when the user has set a real name ** in the $$from variable. */ { "recall", DT_QUAD, R_NONE, {.l=OPT_RECALL}, {.l=MUTT_ASKYES} }, /* ** .pp ** Controls whether or not Mutt recalls postponed messages ** when composing a new message. ** .pp ** Setting this variable to \fIyes\fP is not generally useful, and thus not ** recommended. Note that the \fC\fP function can be used ** to manually recall postponed messages. ** .pp ** Also see $$postponed variable. */ { "record", DT_PATH, R_NONE, {.p=&Outbox}, {.p="~/sent"} }, /* ** .pp ** This specifies the file into which your outgoing messages should be ** appended. (This is meant as the primary method for saving a copy of ** your messages, but another way to do this is using the ``$my_hdr'' ** command to create a ``Bcc:'' field with your email address in it.) ** .pp ** The value of \fI$$record\fP is overridden by the $$force_name and ** $$save_name variables, and the ``$fcc-hook'' command. Also see $$copy ** and $$write_bcc. */ { "reflow_space_quotes", DT_BOOL, R_NONE, {.l=OPTREFLOWSPACEQUOTES}, {.l=1} }, /* ** .pp ** This option controls how quotes from format=flowed messages are displayed ** in the pager and when replying (with $$text_flowed \fIunset\fP). ** When set, this option adds spaces after each level of quote marks, turning ** ">>>foo" into "> > > foo". ** .pp ** \fBNote:\fP If $$reflow_text is \fIunset\fP, this option has no effect. ** Also, this option does not affect replies when $$text_flowed is \fIset\fP. */ { "reflow_text", DT_BOOL, R_NONE, {.l=OPTREFLOWTEXT}, {.l=1} }, /* ** .pp ** When \fIset\fP, Mutt will reformat paragraphs in text/plain ** parts marked format=flowed. If \fIunset\fP, Mutt will display paragraphs ** unaltered from how they appear in the message body. See RFC3676 for ** details on the \fIformat=flowed\fP format. ** .pp ** Also see $$reflow_wrap, and $$wrap. */ { "reflow_wrap", DT_NUM, R_NONE, {.p=&ReflowWrap}, {.l=78} }, /* ** .pp ** This variable controls the maximum paragraph width when reformatting text/plain ** parts when $$reflow_text is \fIset\fP. When the value is 0, paragraphs will ** be wrapped at the terminal's right margin. A positive value sets the ** paragraph width relative to the left margin. A negative value set the ** paragraph width relative to the right margin. ** .pp ** Also see $$wrap. */ { "reply_regexp", DT_RX, R_INDEX|R_RESORT, {.p=&ReplyRegexp}, {.p="^(re([\\[0-9\\]+])*|aw):[ \t]*"} }, /* ** .pp ** A regular expression used to recognize reply messages when threading ** and replying. The default value corresponds to the English "Re:" and ** the German "Aw:". */ { "reply_self", DT_BOOL, R_NONE, {.l=OPTREPLYSELF}, {.l=0} }, /* ** .pp ** If \fIunset\fP and you are replying to a message sent by you, Mutt will ** assume that you want to reply to the recipients of that message rather ** than to yourself. ** .pp ** Also see the ``$alternates'' command. */ { "reply_to", DT_QUAD, R_NONE, {.l=OPT_REPLYTO}, {.l=MUTT_ASKYES} }, /* ** .pp ** If \fIset\fP, when replying to a message, Mutt will use the address listed ** in the Reply-to: header as the recipient of the reply. If \fIunset\fP, ** it will use the address in the From: header field instead. This ** option is useful for reading a mailing list that sets the Reply-To: ** header field to the list address and you want to send a private ** message to the author of a message. */ { "resolve", DT_BOOL, R_NONE, {.l=OPTRESOLVE}, {.l=1} }, /* ** .pp ** When \fIset\fP, the cursor will be automatically advanced to the next ** (possibly undeleted) message whenever a command that modifies the ** current message is executed. */ { "resume_draft_files", DT_BOOL, R_NONE, {.l=OPTRESUMEDRAFTFILES}, {.l=0} }, /* ** .pp ** If \fIset\fP, draft files (specified by \fC-H\fP on the command ** line) are processed similarly to when resuming a postponed ** message. Recipients are not prompted for; send-hooks are not ** evaluated; no alias expansion takes place; user-defined headers ** and signatures are not added to the message. */ { "resume_edited_draft_files", DT_BOOL, R_NONE, {.l=OPTRESUMEEDITEDDRAFTFILES}, {.l=1} }, /* ** .pp ** If \fIset\fP, draft files previously edited (via \fC-E -H\fP on ** the command line) will have $$resume_draft_files automatically ** set when they are used as a draft file again. ** .pp ** The first time a draft file is saved, mutt will add a header, ** X-Mutt-Resume-Draft to the saved file. The next time the draft ** file is read in, if mutt sees the header, it will set ** $$resume_draft_files. ** .pp ** This option is designed to prevent multiple signatures, ** user-defined headers, and other processing effects from being ** made multiple times to the draft file. */ { "reverse_alias", DT_BOOL, R_BOTH, {.l=OPTREVALIAS}, {.l=0} }, /* ** .pp ** This variable controls whether or not Mutt will display the ``personal'' ** name from your aliases in the index menu if it finds an alias that ** matches the message's sender. For example, if you have the following ** alias: ** .ts ** alias juser abd30425@somewhere.net (Joe User) ** .te ** .pp ** and then you receive mail which contains the following header: ** .ts ** From: abd30425@somewhere.net ** .te ** .pp ** It would be displayed in the index menu as ``Joe User'' instead of ** ``abd30425@somewhere.net.'' This is useful when the person's e-mail ** address is not human friendly. */ { "reverse_name", DT_BOOL, R_BOTH, {.l=OPTREVNAME}, {.l=0} }, /* ** .pp ** It may sometimes arrive that you receive mail to a certain machine, ** move the messages to another machine, and reply to some the messages ** from there. If this variable is \fIset\fP, the default \fIFrom:\fP line of ** the reply messages is built using the address where you received the ** messages you are replying to \fBif\fP that address matches your ** ``$alternates''. If the variable is \fIunset\fP, or the address that would be ** used doesn't match your ``$alternates'', the \fIFrom:\fP line will use ** your address on the current machine. ** .pp ** Also see the ``$alternates'' command and $$reverse_realname. */ { "reverse_realname", DT_BOOL, R_BOTH, {.l=OPTREVREAL}, {.l=1} }, /* ** .pp ** This variable fine-tunes the behavior of the $$reverse_name feature. ** .pp ** When it is \fIunset\fP, Mutt will remove the real name part of a ** matching address. This allows the use of the email address ** without having to also use what the sender put in the real name ** field. ** .pp ** When it is \fIset\fP, Mutt will use the matching address as-is. ** .pp ** In either case, a missing real name will be filled in afterwards ** using the value of $$realname. */ { "rfc2047_parameters", DT_BOOL, R_NONE, {.l=OPTRFC2047PARAMS}, {.l=0} }, /* ** .pp ** When this variable is \fIset\fP, Mutt will decode RFC2047-encoded MIME ** parameters. You want to set this variable when mutt suggests you ** to save attachments to files named like: ** .ts ** =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?= ** .te ** .pp ** When this variable is \fIset\fP interactively, the change won't be ** active until you change folders. ** .pp ** Note that this use of RFC2047's encoding is explicitly ** prohibited by the standard, but nevertheless encountered in the ** wild. ** .pp ** Also note that setting this parameter will \fInot\fP have the effect ** that mutt \fIgenerates\fP this kind of encoding. Instead, mutt will ** unconditionally use the encoding specified in RFC2231. */ { "save_address", DT_BOOL, R_NONE, {.l=OPTSAVEADDRESS}, {.l=0} }, /* ** .pp ** If \fIset\fP, mutt will take the sender's full address when choosing a ** default folder for saving a mail. If $$save_name or $$force_name ** is \fIset\fP too, the selection of the Fcc folder will be changed as well. */ { "save_empty", DT_BOOL, R_NONE, {.l=OPTSAVEEMPTY}, {.l=1} }, /* ** .pp ** When \fIunset\fP, mailboxes which contain no saved messages will be removed ** when closed (the exception is $$spoolfile which is never removed). ** If \fIset\fP, mailboxes are never removed. ** .pp ** \fBNote:\fP This only applies to mbox and MMDF folders, Mutt does not ** delete MH and Maildir directories. */ { "save_history", DT_NUM, R_NONE, {.p=&SaveHist}, {.l=0} }, /* ** .pp ** This variable controls the size of the history (per category) saved in the ** $$history_file file. */ { "save_name", DT_BOOL, R_NONE, {.l=OPTSAVENAME}, {.l=0} }, /* ** .pp ** This variable controls how copies of outgoing messages are saved. ** When \fIset\fP, a check is made to see if a mailbox specified by the ** recipient address exists (this is done by searching for a mailbox in ** the $$folder directory with the \fIusername\fP part of the ** recipient address). If the mailbox exists, the outgoing message will ** be saved to that mailbox, otherwise the message is saved to the ** $$record mailbox. ** .pp ** Also see the $$force_name variable. */ { "score", DT_BOOL, R_NONE, {.l=OPTSCORE}, {.l=1} }, /* ** .pp ** When this variable is \fIunset\fP, scoring is turned off. This can ** be useful to selectively disable scoring for certain folders when the ** $$score_threshold_delete variable and related are used. ** */ { "score_threshold_delete", DT_NUM, R_NONE, {.p=&ScoreThresholdDelete}, {.l=-1} }, /* ** .pp ** Messages which have been assigned a score equal to or lower than the value ** of this variable are automatically marked for deletion by mutt. Since ** mutt scores are always greater than or equal to zero, the default setting ** of this variable will never mark a message for deletion. */ { "score_threshold_flag", DT_NUM, R_NONE, {.p=&ScoreThresholdFlag}, {.l=9999} }, /* ** .pp ** Messages which have been assigned a score greater than or equal to this ** variable's value are automatically marked "flagged". */ { "score_threshold_read", DT_NUM, R_NONE, {.p=&ScoreThresholdRead}, {.l=-1} }, /* ** .pp ** Messages which have been assigned a score equal to or lower than the value ** of this variable are automatically marked as read by mutt. Since ** mutt scores are always greater than or equal to zero, the default setting ** of this variable will never mark a message read. */ { "search_context", DT_NUM, R_NONE, {.p=&SearchContext}, {.l=0} }, /* ** .pp ** For the pager, this variable specifies the number of lines shown ** before search results. By default, search results will be top-aligned. */ { "send_charset", DT_STR, R_NONE, {.p=&SendCharset}, {.p="us-ascii:iso-8859-1:utf-8"} }, /* ** .pp ** A colon-delimited list of character sets for outgoing messages. Mutt will use the ** first character set into which the text can be converted exactly. ** If your $$charset is not ``iso-8859-1'' and recipients may not ** understand ``UTF-8'', it is advisable to include in the list an ** appropriate widely used standard character set (such as ** ``iso-8859-2'', ``koi8-r'' or ``iso-2022-jp'') either instead of or after ** ``iso-8859-1''. ** .pp ** In case the text cannot be converted into one of these exactly, ** mutt uses $$charset as a fallback. */ { "send_multipart_alternative", DT_QUAD, R_NONE, {.l=OPT_SENDMULTIPARTALT}, {.l=MUTT_NO} }, /* ** .pp ** If \fIset\fP, Mutt will generate a multipart/alternative ** container and an alternative part using the filter script specified in ** $$send_multipart_alternative_filter. ** See the section ``MIME Multipart/Alternative'' ($alternative-order). ** .pp ** Note that enabling multipart/alternative is not compatible with inline ** PGP encryption. Mutt will prompt to use PGP/MIME in that case. */ { "send_multipart_alternative_filter", DT_PATH, R_NONE, {.p=&SendMultipartAltFilter}, {.p=0} }, /* ** .pp ** This specifies a filter script, which will convert the main ** (composed) message of the email to an alternative format. The ** message will be piped to the filter's stdin. The expected output ** of the filter is the generated mime type, e.g. text/html, ** followed by a blank line, and then the converted content. ** See the section ``MIME Multipart/Alternative'' ($alternative-order). */ { "sendmail", DT_PATH, R_NONE, {.p=&Sendmail}, {.p=SENDMAIL " -oem -oi"} }, /* ** .pp ** Specifies the program and arguments used to deliver mail sent by Mutt. ** Mutt expects that the specified program interprets additional ** arguments as recipient addresses. Mutt appends all recipients after ** adding a \fC--\fP delimiter (if not already present). Additional ** flags, such as for $$use_8bitmime, $$use_envelope_from, ** $$dsn_notify, or $$dsn_return will be added before the delimiter. ** .pp ** \fBSee also:\fP $$write_bcc. */ { "sendmail_wait", DT_NUM, R_NONE, {.p=&SendmailWait}, {.l=0} }, /* ** .pp ** Specifies the number of seconds to wait for the $$sendmail process ** to finish before giving up and putting delivery in the background. ** .pp ** Mutt interprets the value of this variable as follows: ** .dl ** .dt >0 .dd number of seconds to wait for sendmail to finish before continuing ** .dt 0 .dd wait forever for sendmail to finish ** .dt <0 .dd always put sendmail in the background without waiting ** .de ** .pp ** Note that if you specify a value other than 0, the output of the child ** process will be put in a temporary file. If there is some error, you ** will be informed as to where to find the output. */ { "shell", DT_PATH, R_NONE, {.p=&Shell}, {.p=0} }, /* ** .pp ** Command to use when spawning a subshell. By default, the user's login ** shell from \fC/etc/passwd\fP is used. */ #ifdef USE_SIDEBAR { "sidebar_delim_chars", DT_STR, R_SIDEBAR, {.p=&SidebarDelimChars}, {.p="/."} }, /* ** .pp ** This contains the list of characters which you would like to treat ** as folder separators for displaying paths in the sidebar. ** .pp ** Local mail is often arranged in directories: `dir1/dir2/mailbox'. ** .ts ** set sidebar_delim_chars='/' ** .te ** .pp ** IMAP mailboxes are often named: `folder1.folder2.mailbox'. ** .ts ** set sidebar_delim_chars='.' ** .te ** .pp ** \fBSee also:\fP $$sidebar_short_path, $$sidebar_folder_indent, $$sidebar_indent_string. */ { "sidebar_divider_char", DT_STR, R_SIDEBAR, {.p=&SidebarDividerChar}, {.p="|"} }, /* ** .pp ** This specifies the characters to be drawn between the sidebar (when ** visible) and the other Mutt panels. ASCII and Unicode line-drawing ** characters are supported. */ { "sidebar_folder_indent", DT_BOOL, R_SIDEBAR, {.l=OPTSIDEBARFOLDERINDENT}, {.l=0} }, /* ** .pp ** Set this to indent mailboxes in the sidebar. ** .pp ** \fBSee also:\fP $$sidebar_short_path, $$sidebar_indent_string, $$sidebar_delim_chars. */ { "sidebar_format", DT_STR, R_SIDEBAR, {.p=&SidebarFormat}, {.p="%B%* %n"} }, /* ** .pp ** This variable allows you to customize the sidebar display. This string is ** similar to $$index_format, but has its own set of \fCprintf(3)\fP-like ** sequences: ** .dl ** .dt %B .dd Name of the mailbox ** .dt %S .dd * Size of mailbox (total number of messages) ** .dt %N .dd * Number of unread messages in the mailbox ** .dt %n .dd N if mailbox has new mail, blank otherwise ** .dt %F .dd * Number of Flagged messages in the mailbox ** .dt %! .dd ``!'' : one flagged message; ** ``!!'' : two flagged messages; ** ``n!'' : n flagged messages (for n > 2). ** Otherwise prints nothing. ** .dt %d .dd * @ Number of deleted messages ** .dt %L .dd * @ Number of messages after limiting ** .dt %t .dd * @ Number of tagged messages ** .dt %>X .dd right justify the rest of the string and pad with ``X'' ** .dt %|X .dd pad to the end of the line with ``X'' ** .dt %*X .dd soft-fill with character ``X'' as pad ** .de ** .pp ** * = Can be optionally printed if nonzero ** @ = Only applicable to the current folder ** .pp ** In order to use %S, %N, %F, and %!, $$mail_check_stats must ** be \fIset\fP. When thus set, a suggested value for this option is ** "%B%?F? [%F]?%* %?N?%N/?%S". */ { "sidebar_indent_string", DT_STR, R_SIDEBAR, {.p=&SidebarIndentString}, {.p=" "} }, /* ** .pp ** This specifies the string that is used to indent mailboxes in the sidebar. ** It defaults to two spaces. ** .pp ** \fBSee also:\fP $$sidebar_short_path, $$sidebar_folder_indent, $$sidebar_delim_chars. */ { "sidebar_new_mail_only", DT_BOOL, R_SIDEBAR, {.l=OPTSIDEBARNEWMAILONLY}, {.l=0} }, /* ** .pp ** When set, the sidebar will only display mailboxes containing new, or ** flagged, mail. ** .pp ** \fBSee also:\fP $sidebar_whitelist. */ { "sidebar_next_new_wrap", DT_BOOL, R_NONE, {.l=OPTSIDEBARNEXTNEWWRAP}, {.l=0} }, /* ** .pp ** When set, the \fC\fP command will not stop and the end of ** the list of mailboxes, but wrap around to the beginning. The ** \fC\fP command is similarly affected, wrapping around to ** the end of the list. */ { "sidebar_relative_shortpath_indent", DT_BOOL, R_SIDEBAR, {.l=OPTSIDEBARRELSPINDENT}, {.l=0} }, /* ** .pp ** When set, this option changes how $$sidebar_short_path and ** $$sidebar_folder_indent perform shortening and indentation: both ** will look at the previous sidebar entries and shorten/indent ** relative to the most recent parent. ** .pp ** An example of this option set/unset for mailboxes listed in this ** order, with $$sidebar_short_path=yes, ** $$sidebar_folder_indent=yes, and $$sidebar_indent_string="→": ** .dl ** .dt \fBmailbox\fP .dd \fBset\fP .dd \fBunset\fP ** .dt \fC=a.b\fP .dd \fC=a.b\fP .dd \fC→b\fP ** .dt \fC=a.b.c.d\fP .dd \fC→c.d\fP .dd \fC→→→d\fP ** .dt \fC=a.b.e\fP .dd \fC→e\fP .dd \fC→→e\fP ** .de ** .pp ** The second line illustrates most clearly. With this option set, ** \fC=a.b.c.d\fP is shortened relative to \fC=a.b\fP, becoming ** \fCc.d\fP; it is also indented one place relative to \fC=a.b\fP. ** With this option unset \fC=a.b.c.d\fP is always shortened to the ** last part of the mailbox, \fCd\fP and is indented three places, ** with respect to $$folder (represented by '='). ** .pp ** When set, the third line will also be indented and shortened ** relative to the first line. */ { "sidebar_short_path", DT_BOOL, R_SIDEBAR, {.l=OPTSIDEBARSHORTPATH}, {.l=0} }, /* ** .pp ** By default the sidebar will show the mailbox's path, relative to the ** $$folder variable. Setting \fCsidebar_shortpath=yes\fP will shorten the ** names relative to the previous name. Here's an example: ** .dl ** .dt \fBshortpath=no\fP .dd \fBshortpath=yes\fP .dd \fBshortpath=yes, folderindent=yes, indentstr=".."\fP ** .dt \fCfruit\fP .dd \fCfruit\fP .dd \fCfruit\fP ** .dt \fCfruit.apple\fP .dd \fCapple\fP .dd \fC..apple\fP ** .dt \fCfruit.banana\fP .dd \fCbanana\fP .dd \fC..banana\fP ** .dt \fCfruit.cherry\fP .dd \fCcherry\fP .dd \fC..cherry\fP ** .de ** .pp ** \fBSee also:\fP $$sidebar_delim_chars, $$sidebar_folder_indent, $$sidebar_indent_string. */ { "sidebar_sort_method", DT_SORT|DT_SORT_SIDEBAR, R_SIDEBAR, {.p=&SidebarSortMethod}, {.l=SORT_ORDER} }, /* ** .pp ** Specifies how to sort entries in the file browser. By default, the ** entries are sorted alphabetically. Valid values: ** .il ** .dd alpha (alphabetically) ** .dd count (all message count) ** .dd flagged (flagged message count) ** .dd name (alphabetically) ** .dd new (unread message count) ** .dd path (alphabetically) ** .dd unread (unread message count) ** .dd unsorted ** .ie ** .pp ** You may optionally use the ``reverse-'' prefix to specify reverse sorting ** order (example: ``\fCset sort_browser=reverse-date\fP''). */ { "sidebar_use_mailbox_shortcuts", DT_BOOL, R_SIDEBAR, {.l=OPTSIDEBARUSEMBSHORTCUTS}, {.l=0} }, /* ** .pp ** When set, sidebar mailboxes will be displayed with mailbox shortcut prefixes ** "=" or "~". ** .pp ** When unset, the sidebar will trim off a matching $$folder prefix ** but otherwise not use mailbox shortcuts. */ { "sidebar_visible", DT_BOOL, R_REFLOW, {.l=OPTSIDEBAR}, {.l=0} }, /* ** .pp ** This specifies whether or not to show sidebar. The sidebar shows a list of ** all your mailboxes. ** .pp ** \fBSee also:\fP $$sidebar_format, $$sidebar_width */ { "sidebar_width", DT_NUM, R_REFLOW, {.p=&SidebarWidth}, {.l=30} }, /* ** .pp ** This controls the width of the sidebar. It is measured in screen columns. ** For example: sidebar_width=20 could display 20 ASCII characters, or 10 ** Chinese characters. */ #endif { "sig_dashes", DT_BOOL, R_NONE, {.l=OPTSIGDASHES}, {.l=1} }, /* ** .pp ** If \fIset\fP, a line containing ``-- '' (note the trailing space) will be inserted before your ** $$signature. It is \fBstrongly\fP recommended that you not \fIunset\fP ** this variable unless your signature contains just your name. The ** reason for this is because many software packages use ``-- \n'' to ** detect your signature. For example, Mutt has the ability to highlight ** the signature in a different color in the built-in pager. */ { "sig_on_top", DT_BOOL, R_NONE, {.l=OPTSIGONTOP}, {.l=0} }, /* ** .pp ** If \fIset\fP, the signature will be included before any quoted or forwarded ** text. It is \fBstrongly\fP recommended that you do not set this variable ** unless you really know what you are doing, and are prepared to take ** some heat from netiquette guardians. */ { "signature", DT_PATH, R_NONE, {.p=&Signature}, {.p="~/.signature"} }, /* ** .pp ** Specifies the filename of your signature, which is appended to all ** outgoing messages. If the filename ends with a pipe (``|''), it is ** assumed that filename is a shell command and input should be read from ** its standard output. */ { "simple_search", DT_STR, R_NONE, {.p=&SimpleSearch}, {.p="~f %s | ~s %s"} }, /* ** .pp ** Specifies how Mutt should expand a simple search into a real search ** pattern. A simple search is one that does not contain any of the ``~'' pattern ** operators. See ``$patterns'' for more information on search patterns. ** .pp ** For example, if you simply type ``joe'' at a search or limit prompt, Mutt ** will automatically expand it to the value specified by this variable by ** replacing ``%s'' with the supplied string. ** For the default value, ``joe'' would be expanded to: ``~f joe | ~s joe''. */ { "size_show_bytes", DT_BOOL, R_MENU, {.l=OPTSIZESHOWBYTES}, {.l=0} }, /* ** .pp ** If \fIset\fP, message sizes will display bytes for values less than ** 1 kilobyte. See $formatstrings-size. */ { "size_show_fractions", DT_BOOL, R_MENU, {.l=OPTSIZESHOWFRACTIONS}, {.l=1} }, /* ** .pp ** If \fIset\fP, message sizes will be displayed with a single decimal value ** for sizes from 0 to 10 kilobytes and 1 to 10 megabytes. ** See $formatstrings-size. */ { "size_show_mb", DT_BOOL, R_MENU, {.l=OPTSIZESHOWMB}, {.l=1} }, /* ** .pp ** If \fIset\fP, message sizes will display megabytes for values greater than ** or equal to 1 megabyte. See $formatstrings-size. */ { "size_units_on_left", DT_BOOL, R_MENU, {.l=OPTSIZEUNITSONLEFT}, {.l=0} }, /* ** .pp ** If \fIset\fP, message sizes units will be displayed to the left of the number. ** See $formatstrings-size. */ { "sleep_time", DT_NUM, R_NONE, {.p=&SleepTime}, {.l=1} }, /* ** .pp ** Specifies time, in seconds, to pause while displaying certain informational ** messages, while moving from folder to folder and after expunging ** messages from the current folder. The default is to pause one second, so ** a value of zero for this option suppresses the pause. */ { "smart_wrap", DT_BOOL, R_PAGER_FLOW, {.l=OPTWRAP}, {.l=1} }, /* ** .pp ** Controls the display of lines longer than the screen width in the ** internal pager. If \fIset\fP, long lines are wrapped at a word boundary. If ** \fIunset\fP, lines are simply wrapped at the screen edge. Also see the ** $$markers variable. */ { "smileys", DT_RX, R_PAGER, {.p=&Smileys}, {.p="(>From )|(:[-^]?[][)(><}{|/DP])"} }, /* ** .pp ** The \fIpager\fP uses this variable to catch some common false ** positives of $$quote_regexp, most notably smileys and not consider ** a line quoted text if it also matches $$smileys. This mostly ** happens at the beginning of a line. */ { "smime_ask_cert_label", DT_BOOL, R_NONE, {.l=OPTASKCERTLABEL}, {.l=1} }, /* ** .pp ** This flag controls whether you want to be asked to enter a label ** for a certificate about to be added to the database or not. It is ** \fIset\fP by default. ** (S/MIME only) */ { "smime_ca_location", DT_PATH, R_NONE, {.p=&SmimeCALocation}, {.p=0} }, /* ** .pp ** This variable contains the name of either a directory, or a file which ** contains trusted certificates for use with OpenSSL. ** (S/MIME only) */ { "smime_certificates", DT_PATH, R_NONE, {.p=&SmimeCertificates}, {.p=0} }, /* ** .pp ** Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle ** storage and retrieval of keys by itself. This is very basic right ** now, and keys and certificates are stored in two different ** directories, both named as the hash-value retrieved from ** OpenSSL. There is an index file which contains mailbox-address ** keyid pairs, and which can be manually edited. This option points to ** the location of the certificates. ** (S/MIME only) */ { "smime_decrypt_command", DT_STR, R_NONE, {.p=&SmimeDecryptCommand}, {.p=0} }, /* ** .pp ** This format string specifies a command which is used to decrypt ** \fCapplication/x-pkcs7-mime\fP attachments. ** .pp ** The OpenSSL command formats have their own set of \fCprintf(3)\fP-like sequences ** similar to PGP's: ** .dl ** .dt %f .dd Expands to the name of a file containing a message. ** .dt %s .dd Expands to the name of a file containing the signature part ** . of a \fCmultipart/signed\fP attachment when verifying it. ** .dt %k .dd The key-pair specified with $$smime_default_key ** .dt %c .dd One or more certificate IDs. ** .dt %a .dd The algorithm used for encryption. ** .dt %d .dd The message digest algorithm specified with $$smime_sign_digest_alg. ** .dt %C .dd CA location: Depending on whether $$smime_ca_location ** . points to a directory or file, this expands to ** . ``-CApath $$smime_ca_location'' or ``-CAfile $$smime_ca_location''. ** .de ** .pp ** For examples on how to configure these formats, see the \fCsmime.rc\fP in ** the \fCsamples/\fP subdirectory which has been installed on your system ** alongside the documentation. ** (S/MIME only) */ { "smime_decrypt_use_default_key", DT_BOOL, R_NONE, {.l=OPTSDEFAULTDECRYPTKEY}, {.l=1} }, /* ** .pp ** If \fIset\fP (default) this tells mutt to use the default key for decryption. Otherwise, ** if managing multiple certificate-key-pairs, mutt will try to use the mailbox-address ** to determine the key to use. It will ask you to supply a key, if it can't find one. ** (S/MIME only) */ { "smime_self_encrypt_as", DT_SYN, R_NONE, {.p="smime_default_key"}, {.p=0} }, { "smime_default_key", DT_STR, R_NONE, {.p=&SmimeDefaultKey}, {.p=0} }, /* ** .pp ** This is the default key-pair to use for S/MIME operations, and must be ** set to the keyid (the hash-value that OpenSSL generates) to work properly. ** .pp ** It will be used for encryption (see $$postpone_encrypt and ** $$smime_self_encrypt). ** .pp ** It will be used for decryption unless $$smime_decrypt_use_default_key ** is \fIunset\fP. ** .pp ** It will also be used for signing unless $$smime_sign_as is set. ** .pp ** The (now deprecated) \fIsmime_self_encrypt_as\fP is an alias for this ** variable, and should no longer be used. ** (S/MIME only) */ { "smime_encrypt_command", DT_STR, R_NONE, {.p=&SmimeEncryptCommand}, {.p=0} }, /* ** .pp ** This command is used to create encrypted S/MIME messages. ** .pp ** This is a format string, see the $$smime_decrypt_command command for ** possible \fCprintf(3)\fP-like sequences. ** (S/MIME only) */ { "smime_encrypt_with", DT_STR, R_NONE, {.p=&SmimeCryptAlg}, {.p="aes256"} }, /* ** .pp ** This sets the algorithm that should be used for encryption. ** Valid choices are ``aes128'', ``aes192'', ``aes256'', ``des'', ``des3'', ``rc2-40'', ``rc2-64'', ``rc2-128''. ** (S/MIME only) */ { "smime_get_cert_command", DT_STR, R_NONE, {.p=&SmimeGetCertCommand}, {.p=0} }, /* ** .pp ** This command is used to extract X509 certificates from a PKCS7 structure. ** .pp ** This is a format string, see the $$smime_decrypt_command command for ** possible \fCprintf(3)\fP-like sequences. ** (S/MIME only) */ { "smime_get_cert_email_command", DT_STR, R_NONE, {.p=&SmimeGetCertEmailCommand}, {.p=0} }, /* ** .pp ** This command is used to extract the mail address(es) used for storing ** X509 certificates, and for verification purposes (to check whether the ** certificate was issued for the sender's mailbox). ** .pp ** This is a format string, see the $$smime_decrypt_command command for ** possible \fCprintf(3)\fP-like sequences. ** (S/MIME only) */ { "smime_get_signer_cert_command", DT_STR, R_NONE, {.p=&SmimeGetSignerCertCommand}, {.p=0} }, /* ** .pp ** This command is used to extract only the signers X509 certificate from a S/MIME ** signature, so that the certificate's owner may get compared to the ** email's ``From:'' field. ** .pp ** This is a format string, see the $$smime_decrypt_command command for ** possible \fCprintf(3)\fP-like sequences. ** (S/MIME only) */ { "smime_import_cert_command", DT_STR, R_NONE, {.p=&SmimeImportCertCommand}, {.p=0} }, /* ** .pp ** This command is used to import a certificate via smime_keys. ** .pp ** This is a format string, see the $$smime_decrypt_command command for ** possible \fCprintf(3)\fP-like sequences. ** (S/MIME only) */ { "smime_is_default", DT_BOOL, R_NONE, {.l=OPTSMIMEISDEFAULT}, {.l=0} }, /* ** .pp ** The default behavior of mutt is to use PGP on all auto-sign/encryption ** operations. To override and to use OpenSSL instead this must be \fIset\fP. ** However, this has no effect while replying, since mutt will automatically ** select the same application that was used to sign/encrypt the original ** message. (Note that this variable can be overridden by unsetting $$crypt_autosmime.) ** (S/MIME only) */ { "smime_keys", DT_PATH, R_NONE, {.p=&SmimeKeys}, {.p=0} }, /* ** .pp ** Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle ** storage and retrieval of keys/certs by itself. This is very basic right now, ** and stores keys and certificates in two different directories, both ** named as the hash-value retrieved from OpenSSL. There is an index file ** which contains mailbox-address keyid pair, and which can be manually ** edited. This option points to the location of the private keys. ** (S/MIME only) */ { "smime_pk7out_command", DT_STR, R_NONE, {.p=&SmimePk7outCommand}, {.p=0} }, /* ** .pp ** This command is used to extract PKCS7 structures of S/MIME signatures, ** in order to extract the public X509 certificate(s). ** .pp ** This is a format string, see the $$smime_decrypt_command command for ** possible \fCprintf(3)\fP-like sequences. ** (S/MIME only) */ { "smime_self_encrypt", DT_BOOL, R_NONE, {.l=OPTSMIMESELFENCRYPT}, {.l=1} }, /* ** .pp ** When \fIset\fP, S/MIME encrypted messages will also be encrypted ** using the certificate in $$smime_default_key. ** (S/MIME only) */ { "smime_sign_as", DT_STR, R_NONE, {.p=&SmimeSignAs}, {.p=0} }, /* ** .pp ** If you have a separate key to use for signing, you should set this ** to the signing key. Most people will only need to set $$smime_default_key. ** (S/MIME only) */ { "smime_sign_command", DT_STR, R_NONE, {.p=&SmimeSignCommand}, {.p=0} }, /* ** .pp ** This command is used to created S/MIME signatures of type ** \fCmultipart/signed\fP, which can be read by all mail clients. ** .pp ** This is a format string, see the $$smime_decrypt_command command for ** possible \fCprintf(3)\fP-like sequences. NOTE: %c and %k will default ** to $$smime_sign_as if set, otherwise $$smime_default_key. ** (S/MIME only) */ { "smime_sign_digest_alg", DT_STR, R_NONE, {.p=&SmimeDigestAlg}, {.p="sha256"} }, /* ** .pp ** This sets the algorithm that should be used for the signature message digest. ** Valid choices are ``md5'', ``sha1'', ``sha224'', ``sha256'', ``sha384'', ``sha512''. ** (S/MIME only) */ { "smime_sign_opaque_command", DT_STR, R_NONE, {.p=&SmimeSignOpaqueCommand}, {.p=0} }, /* ** .pp ** This command is used to created S/MIME signatures of type ** \fCapplication/x-pkcs7-signature\fP, which can only be handled by mail ** clients supporting the S/MIME extension. ** .pp ** This is a format string, see the $$smime_decrypt_command command for ** possible \fCprintf(3)\fP-like sequences. ** (S/MIME only) */ { "smime_timeout", DT_LNUM, R_NONE, {.p=&SmimeTimeout}, {.l=300} }, /* ** .pp ** The number of seconds after which a cached passphrase will expire if ** not used. ** (S/MIME only) */ { "smime_verify_command", DT_STR, R_NONE, {.p=&SmimeVerifyCommand}, {.p=0} }, /* ** .pp ** This command is used to verify S/MIME signatures of type \fCmultipart/signed\fP. ** .pp ** This is a format string, see the $$smime_decrypt_command command for ** possible \fCprintf(3)\fP-like sequences. ** (S/MIME only) */ { "smime_verify_opaque_command", DT_STR, R_NONE, {.p=&SmimeVerifyOpaqueCommand}, {.p=0} }, /* ** .pp ** This command is used to verify S/MIME signatures of type ** \fCapplication/x-pkcs7-mime\fP. ** .pp ** This is a format string, see the $$smime_decrypt_command command for ** possible \fCprintf(3)\fP-like sequences. ** (S/MIME only) */ #ifdef USE_SMTP { "smtp_authenticators", DT_STR, R_NONE, {.p=&SmtpAuthenticators}, {.p=0} }, /* ** .pp ** This is a colon-delimited list of authentication methods mutt may ** attempt to use to log in to an SMTP server, in the order mutt should ** try them. Authentication methods are any SASL mechanism, e.g. ** ``digest-md5'', ``gssapi'' or ``cram-md5''. ** This option is case-insensitive. If it is ``unset'' ** (the default) mutt will try all available methods, in order from ** most-secure to least-secure. ** .pp ** Example: ** .ts ** set smtp_authenticators="digest-md5:cram-md5" ** .te */ { "smtp_oauth_refresh_command", DT_STR, R_NONE, {.p=&SmtpOauthRefreshCmd}, {.p=0} }, /* ** .pp ** The command to run to generate an OAUTH refresh token for ** authorizing your connection to your SMTP server. This command will be ** run on every connection attempt that uses the OAUTHBEARER authentication ** mechanism. See ``$oauth'' for details. */ { "smtp_pass", DT_STR, R_NONE, {.p=&SmtpPass}, {.p=0} }, /* ** .pp ** Specifies the password for your SMTP account. If \fIunset\fP, Mutt will ** prompt you for your password when you first send mail via SMTP. ** See $$smtp_url to configure mutt to send mail via SMTP. ** .pp ** \fBWarning\fP: you should only use this option when you are on a ** fairly secure machine, because the superuser can read your muttrc even ** if you are the only one who can read the file. */ { "smtp_url", DT_STR, R_NONE, {.p=&SmtpUrl}, {.p=0} }, /* ** .pp ** Defines the SMTP smarthost where sent messages should relayed for ** delivery. This should take the form of an SMTP URL, e.g.: ** .ts ** smtp[s]://[user[:pass]@]host[:port] ** .te ** .pp ** where ``[...]'' denotes an optional part. ** Setting this variable overrides the value of the $$sendmail ** variable. ** .pp ** Also see $$write_bcc. */ #endif /* USE_SMTP */ { "sort", DT_SORT, R_INDEX|R_RESORT, {.p=&Sort}, {.l=SORT_DATE} }, /* ** .pp ** Specifies how to sort messages in the ``index'' menu. Valid values ** are: ** .il ** .dd date or date-sent ** .dd date-received ** .dd from ** .dd mailbox-order (unsorted) ** .dd score ** .dd size ** .dd spam ** .dd subject ** .dd threads ** .dd to ** .ie ** .pp ** You may optionally use the ``reverse-'' prefix to specify reverse sorting ** order (example: ``\fCset sort=reverse-date-sent\fP''). */ { "sort_alias", DT_SORT|DT_SORT_ALIAS, R_NONE, {.p=&SortAlias}, {.l=SORT_ALIAS} }, /* ** .pp ** Specifies how the entries in the ``alias'' menu are sorted. The ** following are legal values: ** .il ** .dd address (sort alphabetically by email address) ** .dd alias (sort alphabetically by alias name) ** .dd unsorted (leave in order specified in .muttrc) ** .ie */ { "sort_aux", DT_SORT|DT_SORT_AUX, R_INDEX|R_RESORT_BOTH, {.p=&SortAux}, {.l=SORT_DATE} }, /* ** .pp ** This provides a secondary sort for messages in the ``index'' menu, used ** when the $$sort value is equal for two messages. ** .pp ** When sorting by threads, this variable controls how threads are sorted ** in relation to other threads, and how the branches of the thread trees ** are sorted. This can be set to any value that $$sort can, except ** ``threads'' (in that case, mutt will just use ``date-sent''). You can also ** specify the ``last-'' prefix in addition to the ``reverse-'' prefix, but ``last-'' ** must come after ``reverse-''. The ``last-'' prefix causes messages to be ** sorted against its siblings by which has the last descendant, using ** the rest of $$sort_aux as an ordering. For instance, ** .ts ** set sort_aux=last-date-received ** .te ** .pp ** would mean that if a new message is received in a ** thread, that thread becomes the last one displayed (or the first, if ** you have ``\fCset sort=reverse-threads\fP''.) ** .pp ** Note: For reversed-threads $$sort ** order, $$sort_aux is reversed again (which is not the right thing to do, ** but kept to not break any existing configuration setting). */ { "sort_browser", DT_SORT|DT_SORT_BROWSER, R_NONE, {.p=&BrowserSort}, {.l=SORT_ALPHA} }, /* ** .pp ** Specifies how to sort entries in the file browser. By default, the ** entries are sorted alphabetically. Valid values: ** .il ** .dd alpha (alphabetically) ** .dd count ** .dd date ** .dd size ** .dd unread ** .dd unsorted ** .ie ** .pp ** You may optionally use the ``reverse-'' prefix to specify reverse sorting ** order (example: ``\fCset sort_browser=reverse-date\fP''). */ { "sort_re", DT_BOOL, R_INDEX|R_RESORT|R_RESORT_INIT, {.l=OPTSORTRE}, {.l=1} }, /* ** .pp ** This variable is only useful when sorting by threads with ** $$strict_threads \fIunset\fP. In that case, it changes the heuristic ** mutt uses to thread messages by subject. With $$sort_re \fIset\fP, mutt will ** only attach a message as the child of another message by subject if ** the subject of the child message starts with a substring matching the ** setting of $$reply_regexp. With $$sort_re \fIunset\fP, mutt will attach ** the message whether or not this is the case, as long as the ** non-$$reply_regexp parts of both messages are identical. */ { "spam_separator", DT_STR, R_NONE, {.p=&SpamSep}, {.p=","} }, /* ** .pp ** This variable controls what happens when multiple spam headers ** are matched: if \fIunset\fP, each successive header will overwrite any ** previous matches value for the spam label. If \fIset\fP, each successive ** match will append to the previous, using this variable's value as a ** separator. */ { "spoolfile", DT_PATH, R_NONE, {.p=&Spoolfile}, {.p=0} }, /* ** .pp ** If your spool mailbox is in a non-default place where Mutt cannot find ** it, you can specify its location with this variable. Mutt will ** initially set this variable to the value of the environment ** variable \fC$$$MAIL\fP or \fC$$$MAILDIR\fP if either is defined. */ #if defined(USE_SSL) #ifdef USE_SSL_GNUTLS { "ssl_ca_certificates_file", DT_PATH, R_NONE, {.p=&SslCACertFile}, {.p=0} }, /* ** .pp ** This variable specifies a file containing trusted CA certificates. ** Any server certificate that is signed with one of these CA ** certificates is also automatically accepted. (GnuTLS only) ** .pp ** Example: ** .ts ** set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt ** .te */ #endif /* USE_SSL_GNUTLS */ { "ssl_client_cert", DT_PATH, R_NONE, {.p=&SslClientCert}, {.p=0} }, /* ** .pp ** The file containing a client certificate and its associated private ** key. */ { "ssl_force_tls", DT_BOOL, R_NONE, {.l=OPTSSLFORCETLS}, {.l=0} }, /* ** .pp ** If this variable is \fIset\fP, Mutt will require that all connections ** to remote servers be encrypted. Furthermore it will attempt to ** negotiate TLS even if the server does not advertise the capability, ** since it would otherwise have to abort the connection anyway. This ** option supersedes $$ssl_starttls. */ # ifdef USE_SSL_GNUTLS { "ssl_min_dh_prime_bits", DT_NUM, R_NONE, {.p=&SslDHPrimeBits}, {.l=0} }, /* ** .pp ** This variable specifies the minimum acceptable prime size (in bits) ** for use in any Diffie-Hellman key exchange. A value of 0 will use ** the default from the GNUTLS library. (GnuTLS only) */ # endif /* USE_SSL_GNUTLS */ { "ssl_starttls", DT_QUAD, R_NONE, {.l=OPT_SSLSTARTTLS}, {.l=MUTT_YES} }, /* ** .pp ** If \fIset\fP (the default), mutt will attempt to use \fCSTARTTLS\fP on servers ** advertising the capability. When \fIunset\fP, mutt will not attempt to ** use \fCSTARTTLS\fP regardless of the server's capabilities. */ # ifdef USE_SSL_OPENSSL { "ssl_use_sslv2", DT_BOOL, R_NONE, {.l=OPTSSLV2}, {.l=0} }, /* ** .pp ** If \fIset\fP , Mutt will use SSLv2 when communicating with servers that ** request it. \fBN.B. As of 2011, SSLv2 is considered insecure, and using ** is inadvisable. See https://tools.ietf.org/html/rfc6176 .\fP ** (OpenSSL only) */ # endif /* defined USE_SSL_OPENSSL */ { "ssl_use_sslv3", DT_BOOL, R_NONE, {.l=OPTSSLV3}, {.l=0} }, /* ** .pp ** If \fIset\fP , Mutt will use SSLv3 when communicating with servers that ** request it. \fBN.B. As of 2015, SSLv3 is considered insecure, and using ** it is inadvisable. See https://tools.ietf.org/html/rfc7525 .\fP */ { "ssl_use_tlsv1", DT_BOOL, R_NONE, {.l=OPTTLSV1}, {.l=0} }, /* ** .pp ** If \fIset\fP , Mutt will use TLSv1.0 when communicating with servers that ** request it. \fBN.B. As of 2015, TLSv1.0 is considered insecure, and using ** it is inadvisable. See https://tools.ietf.org/html/rfc7525 .\fP */ { "ssl_use_tlsv1_1", DT_BOOL, R_NONE, {.l=OPTTLSV1_1}, {.l=0} }, /* ** .pp ** If \fIset\fP , Mutt will use TLSv1.1 when communicating with servers that ** request it. \fBN.B. As of 2015, TLSv1.1 is considered insecure, and using ** it is inadvisable. See https://tools.ietf.org/html/rfc7525 .\fP */ { "ssl_use_tlsv1_2", DT_BOOL, R_NONE, {.l=OPTTLSV1_2}, {.l=1} }, /* ** .pp ** If \fIset\fP , Mutt will use TLSv1.2 when communicating with servers that ** request it. */ { "ssl_use_tlsv1_3", DT_BOOL, R_NONE, {.l=OPTTLSV1_3}, {.l=1} }, /* ** .pp ** If \fIset\fP , Mutt will use TLSv1.3 when communicating with servers that ** request it. */ #ifdef USE_SSL_OPENSSL { "ssl_usesystemcerts", DT_BOOL, R_NONE, {.l=OPTSSLSYSTEMCERTS}, {.l=1} }, /* ** .pp ** If set to \fIyes\fP, mutt will use CA certificates in the ** system-wide certificate store when checking if a server certificate ** is signed by a trusted CA. (OpenSSL only) */ #endif { "ssl_verify_dates", DT_BOOL, R_NONE, {.l=OPTSSLVERIFYDATES}, {.l=1} }, /* ** .pp ** If \fIset\fP (the default), mutt will not automatically accept a server ** certificate that is either not yet valid or already expired. You should ** only unset this for particular known hosts, using the ** \fC$\fP function. */ { "ssl_verify_host", DT_BOOL, R_NONE, {.l=OPTSSLVERIFYHOST}, {.l=1} }, /* ** .pp ** If \fIset\fP (the default), mutt will not automatically accept a server ** certificate whose host name does not match the host used in your folder ** URL. You should only unset this for particular known hosts, using ** the \fC$\fP function. */ # ifdef USE_SSL_OPENSSL # ifdef HAVE_SSL_PARTIAL_CHAIN { "ssl_verify_partial_chains", DT_BOOL, R_NONE, {.l=OPTSSLVERIFYPARTIAL}, {.l=0} }, /* ** .pp ** This option should not be changed from the default unless you understand ** what you are doing. ** .pp ** Setting this variable to \fIyes\fP will permit verifying partial ** certification chains, i. e. a certificate chain where not the root, ** but an intermediate certificate CA, or the host certificate, are ** marked trusted (in $$certificate_file), without marking the root ** signing CA as trusted. ** .pp ** (OpenSSL 1.0.2b and newer only). */ # endif /* defined HAVE_SSL_PARTIAL_CHAIN */ # endif /* defined USE_SSL_OPENSSL */ { "ssl_ciphers", DT_STR, R_NONE, {.p=&SslCiphers}, {.p=0} }, /* ** .pp ** Contains a colon-seperated list of ciphers to use when using SSL. ** For OpenSSL, see ciphers(1) for the syntax of the string. ** .pp ** For GnuTLS, this option will be used in place of "NORMAL" at the ** start of the priority string. See gnutls_priority_init(3) for the ** syntax and more details. (Note: GnuTLS version 2.1.7 or higher is ** required.) */ #endif /* defined(USE_SSL) */ { "status_chars", DT_MBCHARTBL, R_BOTH, {.p=&StChars}, {.p="-*%A"} }, /* ** .pp ** Controls the characters used by the ``%r'' indicator in ** $$status_format. The first character is used when the mailbox is ** unchanged. The second is used when the mailbox has been changed, and ** it needs to be resynchronized. The third is used if the mailbox is in ** read-only mode, or if the mailbox will not be written when exiting ** that mailbox (You can toggle whether to write changes to a mailbox ** with the \fC\fP operation, bound by default to ``%''). The fourth ** is used to indicate that the current folder has been opened in attach- ** message mode (Certain operations like composing a new mail, replying, ** forwarding, etc. are not permitted in this mode). */ { "status_format", DT_STR, R_BOTH, {.p=&Status}, {.p="-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"} }, /* ** .pp ** Controls the format of the status line displayed in the ``index'' ** menu. This string is similar to $$index_format, but has its own ** set of \fCprintf(3)\fP-like sequences: ** .dl ** .dt %b .dd number of mailboxes with new mail * ** .dt %d .dd number of deleted messages * ** .dt %f .dd the full pathname of the current mailbox ** .dt %F .dd number of flagged messages * ** .dt %h .dd local hostname ** .dt %l .dd size (in bytes) of the current mailbox (see $formatstrings-size) * ** .dt %L .dd size (in bytes) of the messages shown ** (i.e., which match the current limit) (see $formatstrings-size) * ** .dt %m .dd the number of messages in the mailbox * ** .dt %M .dd the number of messages shown (i.e., which match the current limit) * ** .dt %n .dd number of new messages in the mailbox * ** .dt %o .dd number of old unread messages * ** .dt %p .dd number of postponed messages * ** .dt %P .dd percentage of the way through the index ** .dt %r .dd modified/read-only/won't-write/attach-message indicator, ** according to $$status_chars ** .dt %R .dd number of read messages * ** .dt %s .dd current sorting mode ($$sort) ** .dt %S .dd current aux sorting method ($$sort_aux) ** .dt %t .dd number of tagged messages * ** .dt %u .dd number of unread messages * ** .dt %v .dd Mutt version string ** .dt %V .dd currently active limit pattern, if any * ** .dt %>X .dd right justify the rest of the string and pad with ``X'' ** .dt %|X .dd pad to the end of the line with ``X'' ** .dt %*X .dd soft-fill with character ``X'' as pad ** .de ** .pp ** For an explanation of ``soft-fill'', see the $$index_format documentation. ** .pp ** * = can be optionally printed if nonzero ** .pp ** Some of the above sequences can be used to optionally print a string ** if their value is nonzero. For example, you may only want to see the ** number of flagged messages if such messages exist, since zero is not ** particularly meaningful. To optionally print a string based upon one ** of the above sequences, the following construct is used: ** .pp ** \fC%???\fP ** .pp ** where \fIsequence_char\fP is a character from the table above, and ** \fIoptional_string\fP is the string you would like printed if ** \fIsequence_char\fP is nonzero. \fIoptional_string\fP \fBmay\fP contain ** other sequences as well as normal text, but you may \fBnot\fP nest ** optional strings. ** .pp ** Here is an example illustrating how to optionally print the number of ** new messages in a mailbox: ** .pp ** \fC%?n?%n new messages.?\fP ** .pp ** You can also switch between two strings using the following construct: ** .pp ** \fC%??&?\fP ** .pp ** If the value of \fIsequence_char\fP is non-zero, \fIif_string\fP will ** be expanded, otherwise \fIelse_string\fP will be expanded. ** .pp ** You can force the result of any \fCprintf(3)\fP-like sequence to be lowercase ** by prefixing the sequence character with an underscore (``_'') sign. ** For example, if you want to display the local hostname in lowercase, ** you would use: ``\fC%_h\fP''. ** .pp ** If you prefix the sequence character with a colon (``:'') character, mutt ** will replace any dots in the expansion by underscores. This might be helpful ** with IMAP folders that don't like dots in folder names. */ { "status_on_top", DT_BOOL, R_REFLOW, {.l=OPTSTATUSONTOP}, {.l=0} }, /* ** .pp ** Setting this variable causes the ``status bar'' to be displayed on ** the first line of the screen rather than near the bottom. If $$help ** is \fIset\fP, too it'll be placed at the bottom. */ { "strict_threads", DT_BOOL, R_RESORT|R_RESORT_INIT|R_INDEX, {.l=OPTSTRICTTHREADS}, {.l=0} }, /* ** .pp ** If \fIset\fP, threading will only make use of the ``In-Reply-To'' and ** ``References:'' fields when you $$sort by message threads. By ** default, messages with the same subject are grouped together in ** ``pseudo threads.''. This may not always be desirable, such as in a ** personal mailbox where you might have several unrelated messages with ** the subjects like ``hi'' which will get grouped together. See also ** $$sort_re for a less drastic way of controlling this ** behavior. */ { "suspend", DT_BOOL, R_NONE, {.l=OPTSUSPEND}, {.l=1} }, /* ** .pp ** When \fIunset\fP, mutt won't stop when the user presses the terminal's ** \fIsusp\fP key, usually ``^Z''. This is useful if you run mutt ** inside an xterm using a command like ``\fCxterm -e mutt\fP''. */ { "text_flowed", DT_BOOL, R_NONE, {.l=OPTTEXTFLOWED}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt will generate ``format=flowed'' bodies with a content type ** of ``\fCtext/plain; format=flowed\fP''. ** This format is easier to handle for some mailing software, and generally ** just looks like ordinary text. To actually make use of this format's ** features, you'll need support in your editor. ** .pp ** The option only controls newly composed messages. Postponed messages, ** resent messages, and draft messages (via -H on the command line) will ** use the content-type of the source message. ** .pp ** Note that $$indent_string is ignored when this option is \fIset\fP. */ { "thorough_search", DT_BOOL, R_NONE, {.l=OPTTHOROUGHSRC}, {.l=1} }, /* ** .pp ** Affects the \fC~b\fP and \fC~h\fP search operations described in ** section ``$patterns''. If \fIset\fP, the headers and body/attachments of ** messages to be searched are decoded before searching. If \fIunset\fP, ** messages are searched as they appear in the folder. ** .pp ** Users searching attachments or for non-ASCII characters should \fIset\fP ** this value because decoding also includes MIME parsing/decoding and possible ** character set conversions. Otherwise mutt will attempt to match against the ** raw message received (for example quoted-printable encoded or with encoded ** headers) which may lead to incorrect search results. */ { "thread_received", DT_BOOL, R_RESORT|R_RESORT_INIT|R_INDEX, {.l=OPTTHREADRECEIVED}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt uses the date received rather than the date sent ** to thread messages by subject. */ { "tilde", DT_BOOL, R_PAGER, {.l=OPTTILDE}, {.l=0} }, /* ** .pp ** When \fIset\fP, the internal-pager will pad blank lines to the bottom of the ** screen with a tilde (``~''). */ { "time_inc", DT_NUM, R_NONE, {.p=&TimeInc}, {.l=0} }, /* ** .pp ** Along with $$read_inc, $$write_inc, and $$net_inc, this ** variable controls the frequency with which progress updates are ** displayed. It suppresses updates less than $$time_inc milliseconds ** apart. This can improve throughput on systems with slow terminals, ** or when running mutt on a remote system. ** .pp ** Also see the ``$tuning'' section of the manual for performance considerations. */ { "timeout", DT_NUM, R_NONE, {.p=&Timeout}, {.l=600} }, /* ** .pp ** When Mutt is waiting for user input either idling in menus or ** in an interactive prompt, Mutt would block until input is ** present. Depending on the context, this would prevent certain ** operations from working, like checking for new mail or keeping ** an IMAP connection alive. ** .pp ** This variable controls how many seconds Mutt will at most wait ** until it aborts waiting for input, performs these operations and ** continues to wait for input. ** .pp ** A value of zero or less will cause Mutt to never time out. */ { "tmpdir", DT_PATH, R_NONE, {.p=&Tempdir}, {.p=0} }, /* ** .pp ** This variable allows you to specify where Mutt will place its ** temporary files needed for displaying and composing messages. If ** this variable is not set, the environment variable \fC$$$TMPDIR\fP is ** used. If \fC$$$TMPDIR\fP is not set then ``\fC/tmp\fP'' is used. */ { "to_chars", DT_MBCHARTBL, R_BOTH, {.p=&Tochars}, {.p=" +TCFL"} }, /* ** .pp ** Controls the character used to indicate mail addressed to you. The ** first character is the one used when the mail is \fInot\fP addressed to your ** address. The second is used when you are the only ** recipient of the message. The third is when your address ** appears in the ``To:'' header field, but you are not the only recipient of ** the message. The fourth character is used when your ** address is specified in the ``Cc:'' header field, but you are not the only ** recipient. The fifth character is used to indicate mail that was sent ** by \fIyou\fP. The sixth character is used to indicate when a mail ** was sent to a mailing-list you subscribe to. */ { "trash", DT_PATH, R_NONE, {.p=&TrashPath}, {.p=0} }, /* ** .pp ** If set, this variable specifies the path of the trash folder where the ** mails marked for deletion will be moved, instead of being irremediably ** purged. ** .pp ** NOTE: When you delete a message in the trash folder, it is really ** deleted, so that you have a way to clean the trash. */ {"ts_icon_format", DT_STR, R_BOTH, {.p=&TSIconFormat}, {.p="M%?n?AIL&ail?"} }, /* ** .pp ** Controls the format of the icon title, as long as ``$$ts_enabled'' is set. ** This string is identical in formatting to the one used by ** ``$$status_format''. */ {"ts_enabled", DT_BOOL, R_BOTH, {.l=OPTTSENABLED}, {.l=0} }, /* The default must be off to force in the validity checking. */ /* ** .pp ** Controls whether mutt tries to set the terminal status line and icon name. ** Most terminal emulators emulate the status line in the window title. */ {"ts_status_format", DT_STR, R_BOTH, {.p=&TSStatusFormat}, {.p="Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?"} }, /* ** .pp ** Controls the format of the terminal status line (or window title), ** provided that ``$$ts_enabled'' has been set. This string is identical in ** formatting to the one used by ``$$status_format''. */ #ifdef USE_SOCKET { "tunnel", DT_STR, R_NONE, {.p=&Tunnel}, {.p=0} }, /* ** .pp ** Setting this variable will cause mutt to open a pipe to a command ** instead of a raw socket. You may be able to use this to set up ** preauthenticated connections to your IMAP/POP3/SMTP server. Example: ** .ts ** set tunnel="ssh -q mailhost.net /usr/local/libexec/imapd" ** .te ** .pp ** Note: For this example to work you must be able to log in to the remote ** machine without having to enter a password. ** .pp ** When set, Mutt uses the tunnel for all remote connections. ** Please see ``$account-hook'' in the manual for how to use different ** tunnel commands per connection. */ #endif { "uncollapse_jump", DT_BOOL, R_NONE, {.l=OPTUNCOLLAPSEJUMP}, {.l=0} }, /* ** .pp ** When \fIset\fP, Mutt will jump to the next unread message, if any, ** when the current thread is \fIun\fPcollapsed. */ { "uncollapse_new", DT_BOOL, R_NONE, {.l=OPTUNCOLLAPSENEW}, {.l=1} }, /* ** .pp ** When \fIset\fP, Mutt will automatically uncollapse any collapsed thread ** that receives a new message. When \fIunset\fP, collapsed threads will ** remain collapsed. the presence of the new message will still affect ** index sorting, though. */ { "use_8bitmime", DT_BOOL, R_NONE, {.l=OPTUSE8BITMIME}, {.l=0} }, /* ** .pp ** \fBWarning:\fP do not set this variable unless you are using a version ** of sendmail which supports the \fC-B8BITMIME\fP flag (such as sendmail ** 8.8.x) or you may not be able to send mail. ** .pp ** When \fIset\fP, Mutt will invoke $$sendmail with the \fC-B8BITMIME\fP ** flag when sending 8-bit messages to enable ESMTP negotiation. */ { "use_domain", DT_BOOL, R_NONE, {.l=OPTUSEDOMAIN}, {.l=1} }, /* ** .pp ** When \fIset\fP, Mutt will qualify all local addresses (ones without the ** ``@host'' portion) with the value of $$hostname. If \fIunset\fP, no ** addresses will be qualified. */ { "use_envelope_from", DT_BOOL, R_NONE, {.l=OPTENVFROM}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt will set the \fIenvelope\fP sender of the message. ** If $$envelope_from_address is \fIset\fP, it will be used as the sender ** address. If \fIunset\fP, mutt will attempt to derive the sender from the ** ``From:'' header. ** .pp ** Note that this information is passed to sendmail command using the ** \fC-f\fP command line switch. Therefore setting this option is not useful ** if the $$sendmail variable already contains \fC-f\fP or if the ** executable pointed to by $$sendmail doesn't support the \fC-f\fP switch. */ { "envelope_from", DT_SYN, R_NONE, {.p="use_envelope_from"}, {.p=0} }, /* */ { "use_from", DT_BOOL, R_NONE, {.l=OPTUSEFROM}, {.l=1} }, /* ** .pp ** When \fIset\fP, Mutt will generate the ``From:'' header field when ** sending messages. If \fIunset\fP, no ``From:'' header field will be ** generated unless the user explicitly sets one using the ``$my_hdr'' ** command. */ #ifdef HAVE_GETADDRINFO { "use_ipv6", DT_BOOL, R_NONE, {.l=OPTUSEIPV6}, {.l=1} }, /* ** .pp ** When \fIset\fP, Mutt will look for IPv6 addresses of hosts it tries to ** contact. If this option is \fIunset\fP, Mutt will restrict itself to IPv4 addresses. ** Normally, the default should work. */ #endif /* HAVE_GETADDRINFO */ { "user_agent", DT_BOOL, R_NONE, {.l=OPTXMAILER}, {.l=0} }, /* ** .pp ** When \fIset\fP, mutt will add a ``User-Agent:'' header to outgoing ** messages, indicating which version of mutt was used for composing ** them. */ { "visual", DT_PATH, R_NONE, {.p=&Visual}, {.p=0} }, /* ** .pp ** Specifies the visual editor to invoke when the ``\fC~v\fP'' command is ** given in the built-in editor. */ { "wait_key", DT_BOOL, R_NONE, {.l=OPTWAITKEY}, {.l=1} }, /* ** .pp ** Controls whether Mutt will ask you to press a key after an external command ** has been invoked by these functions: \fC\fP, ** \fC\fP, \fC\fP, \fC\fP, ** and \fC\fP commands. ** .pp ** It is also used when viewing attachments with ``$auto_view'', provided ** that the corresponding mailcap entry has a \fIneedsterminal\fP flag, ** and the external program is interactive. ** .pp ** When \fIset\fP, Mutt will always ask for a key. When \fIunset\fP, Mutt will wait ** for a key only if the external command returned a non-zero status. */ { "weed", DT_BOOL, R_NONE, {.l=OPTWEED}, {.l=1} }, /* ** .pp ** When \fIset\fP, mutt will weed headers when displaying, forwarding, ** printing, or replying to messages. */ { "wrap", DT_NUM, R_PAGER, {.p=&Wrap}, {.l=0} }, /* ** .pp ** When set to a positive value, mutt will wrap text at $$wrap characters. ** When set to a negative value, mutt will wrap text so that there are $$wrap ** characters of empty space on the right side of the terminal. Setting it ** to zero makes mutt wrap at the terminal width. ** .pp ** Also see $$reflow_wrap. */ { "wrap_headers", DT_NUM, R_PAGER, {.p=&WrapHeaders}, {.l=78} }, /* ** .pp ** This option specifies the number of characters to use for wrapping ** an outgoing message's headers. Allowed values are between 78 and 998 ** inclusive. ** .pp ** \fBNote:\fP This option usually shouldn't be changed. RFC5233 ** recommends a line length of 78 (the default), so \fBplease only change ** this setting when you know what you're doing\fP. */ { "wrap_search", DT_BOOL, R_NONE, {.l=OPTWRAPSEARCH}, {.l=1} }, /* ** .pp ** Controls whether searches wrap around the end. ** .pp ** When \fIset\fP, searches will wrap around the first (or last) item. When ** \fIunset\fP, incremental searches will not wrap. */ { "wrapmargin", DT_NUM, R_PAGER, {.p=&Wrap}, {.l=0} }, /* ** .pp ** (DEPRECATED) Equivalent to setting $$wrap with a negative value. */ { "write_bcc", DT_BOOL, R_NONE, {.l=OPTWRITEBCC}, {.l=0} }, /* ** .pp ** Controls whether mutt writes out the ``Bcc:'' header when ** preparing messages to be sent. Some MTAs, such as Exim and ** Courier, do not strip the ``Bcc:'' header; so it is advisable to ** leave this unset unless you have a particular need for the header ** to be in the sent message. ** .pp ** If mutt is set to deliver directly via SMTP (see $$smtp_url), ** this option does nothing: mutt will never write out the ``Bcc:'' ** header in this case. ** .pp ** Note this option only affects the sending of messages. Fcc'ed ** copies of a message will always contain the ``Bcc:'' header if ** one exists. */ { "write_inc", DT_NUM, R_NONE, {.p=&WriteInc}, {.l=10} }, /* ** .pp ** When writing a mailbox, a message will be printed every ** $$write_inc messages to indicate progress. If set to 0, only a ** single message will be displayed before writing a mailbox. ** .pp ** Also see the $$read_inc, $$net_inc and $$time_inc variables and the ** ``$tuning'' section of the manual for performance considerations. */ {"xterm_icon", DT_SYN, R_NONE, {.p="ts_icon_format"}, {.p=0} }, /* */ {"xterm_title", DT_SYN, R_NONE, {.p="ts_status_format"}, {.p=0} }, /* */ {"xterm_set_titles", DT_SYN, R_NONE, {.p="ts_enabled"}, {.p=0} }, /* */ /*--*/ { NULL, 0, 0, {.l=0}, {.l=0} } }; const struct mapping_t SortMethods[] = { { "date", SORT_DATE }, { "date-sent", SORT_DATE }, { "date-received", SORT_RECEIVED }, { "mailbox-order", SORT_ORDER }, { "subject", SORT_SUBJECT }, { "from", SORT_FROM }, { "size", SORT_SIZE }, { "threads", SORT_THREADS }, { "to", SORT_TO }, { "score", SORT_SCORE }, { "spam", SORT_SPAM }, { "label", SORT_LABEL }, { NULL, 0 } }; /* same as SortMethods, but with "threads" replaced by "date" */ const struct mapping_t SortAuxMethods[] = { { "date", SORT_DATE }, { "date-sent", SORT_DATE }, { "date-received", SORT_RECEIVED }, { "mailbox-order", SORT_ORDER }, { "subject", SORT_SUBJECT }, { "from", SORT_FROM }, { "size", SORT_SIZE }, { "threads", SORT_DATE }, /* note: sort_aux == threads * isn't possible. */ { "to", SORT_TO }, { "score", SORT_SCORE }, { "spam", SORT_SPAM }, { "label", SORT_LABEL }, { NULL, 0 } }; const struct mapping_t SortBrowserMethods[] = { { "alpha", SORT_SUBJECT }, { "count", SORT_COUNT }, { "date", SORT_DATE }, { "size", SORT_SIZE }, { "unread", SORT_UNREAD }, { "unsorted", SORT_ORDER }, { NULL, 0 } }; const struct mapping_t SortAliasMethods[] = { { "alias", SORT_ALIAS }, { "address", SORT_ADDRESS }, { "unsorted", SORT_ORDER }, { NULL, 0 } }; const struct mapping_t SortKeyMethods[] = { { "address", SORT_ADDRESS }, { "date", SORT_DATE }, { "keyid", SORT_KEYID }, { "trust", SORT_TRUST }, { NULL, 0 } }; const struct mapping_t SortSidebarMethods[] = { { "alpha", SORT_PATH }, { "count", SORT_COUNT }, { "flagged", SORT_FLAGGED }, { "mailbox-order", SORT_ORDER }, { "name", SORT_PATH }, { "new", SORT_UNREAD }, /* kept for compatibility */ { "path", SORT_PATH }, { "unread", SORT_UNREAD }, { "unsorted", SORT_ORDER }, { NULL, 0 } }; /* functions used to parse commands in a rc file */ static int parse_list (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_spam_list (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_unlist (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); #ifdef USE_SIDEBAR static int parse_path_list (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_path_unlist (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); #endif /* USE_SIDEBAR */ static int parse_group (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_lists (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_unlists (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_alias (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_unalias (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_echo (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_ignore (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_unignore (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_source (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_set (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_setenv (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_my_hdr (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_unmy_hdr (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_subscribe (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_unsubscribe (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_attachments (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_unattachments (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_replace_list (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_unreplace_list (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_subjectrx_list (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_unsubjectrx_list (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_alternates (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); static int parse_unalternates (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); /* Parse -group arguments */ static int parse_group_context (group_context_t **ctx, BUFFER *buf, BUFFER *s, BUFFER *err); struct command_t { char *name; int (*func) (BUFFER *, BUFFER *, union pointer_long_t, BUFFER *); union pointer_long_t data; }; const struct command_t Commands[] = { { "alternates", parse_alternates, {.l=0} }, { "unalternates", parse_unalternates, {.l=0} }, #ifdef USE_SOCKET { "account-hook", mutt_parse_hook, {.l=MUTT_ACCOUNTHOOK} }, #endif { "alias", parse_alias, {.l=0} }, { "attachments", parse_attachments, {.l=0} }, { "unattachments", parse_unattachments, {.l=0} }, { "auto_view", parse_list, {.p=&AutoViewList} }, { "alternative_order", parse_list, {.p=&AlternativeOrderList} }, { "bind", mutt_parse_bind, {.l=0} }, { "charset-hook", mutt_parse_hook, {.l=MUTT_CHARSETHOOK} }, #ifdef HAVE_COLOR { "color", mutt_parse_color, {.l=0} }, { "uncolor", mutt_parse_uncolor, {.l=0} }, #endif { "echo", parse_echo, {.l=0} }, { "exec", mutt_parse_exec, {.l=0} }, { "fcc-hook", mutt_parse_hook, {.l=MUTT_FCCHOOK} }, { "fcc-save-hook", mutt_parse_hook, {.l=MUTT_FCCHOOK | MUTT_SAVEHOOK} }, { "folder-hook", mutt_parse_hook, {.l=MUTT_FOLDERHOOK} }, #ifdef USE_COMPRESSED { "open-hook", mutt_parse_hook, {.l=MUTT_OPENHOOK} }, { "close-hook", mutt_parse_hook, {.l=MUTT_CLOSEHOOK} }, { "append-hook", mutt_parse_hook, {.l=MUTT_APPENDHOOK} }, #endif { "group", parse_group, {.l=MUTT_GROUP} }, { "ungroup", parse_group, {.l=MUTT_UNGROUP} }, { "hdr_order", parse_list, {.p=&HeaderOrderList} }, #ifdef HAVE_ICONV { "iconv-hook", mutt_parse_hook, {.l=MUTT_ICONVHOOK} }, #endif { "ignore", parse_ignore, {.l=0} }, { "index-format-hook",mutt_parse_idxfmt_hook, {.l=MUTT_IDXFMTHOOK} }, { "lists", parse_lists, {.l=0} }, { "macro", mutt_parse_macro, {.l=0} }, { "mailboxes", mutt_parse_mailboxes, {.l=MUTT_MAILBOXES} }, { "unmailboxes", mutt_parse_mailboxes, {.l=MUTT_UNMAILBOXES} }, { "mailto_allow", parse_list, {.p=&MailtoAllow} }, { "unmailto_allow", parse_unlist, {.p=&MailtoAllow} }, { "message-hook", mutt_parse_hook, {.l=MUTT_MESSAGEHOOK} }, { "mbox-hook", mutt_parse_hook, {.l=MUTT_MBOXHOOK} }, { "mime_lookup", parse_list, {.p=&MimeLookupList} }, { "unmime_lookup", parse_unlist, {.p=&MimeLookupList} }, { "mono", mutt_parse_mono, {.l=0} }, { "my_hdr", parse_my_hdr, {.l=0} }, { "pgp-hook", mutt_parse_hook, {.l=MUTT_CRYPTHOOK} }, { "crypt-hook", mutt_parse_hook, {.l=MUTT_CRYPTHOOK} }, { "push", mutt_parse_push, {.l=0} }, { "reply-hook", mutt_parse_hook, {.l=MUTT_REPLYHOOK} }, { "reset", parse_set, {.l=MUTT_SET_RESET} }, { "save-hook", mutt_parse_hook, {.l=MUTT_SAVEHOOK} }, { "score", mutt_parse_score, {.l=0} }, { "send-hook", mutt_parse_hook, {.l=MUTT_SENDHOOK} }, { "send2-hook", mutt_parse_hook, {.l=MUTT_SEND2HOOK} }, { "set", parse_set, {.l=0} }, { "setenv", parse_setenv, {.l=0} }, #ifdef USE_SIDEBAR { "sidebar_whitelist",parse_path_list, {.p=&SidebarWhitelist} }, { "unsidebar_whitelist",parse_path_unlist, {.p=&SidebarWhitelist} }, #endif { "source", parse_source, {.l=0} }, { "spam", parse_spam_list, {.l=MUTT_SPAM} }, { "nospam", parse_spam_list, {.l=MUTT_NOSPAM} }, { "subscribe", parse_subscribe, {.l=0} }, { "subjectrx", parse_subjectrx_list, {.p=&SubjectRxList} }, { "unsubjectrx", parse_unsubjectrx_list, {.p=&SubjectRxList} }, { "toggle", parse_set, {.l=MUTT_SET_INV} }, { "unalias", parse_unalias, {.l=0} }, { "unalternative_order",parse_unlist, {.p=&AlternativeOrderList} }, { "unauto_view", parse_unlist, {.p=&AutoViewList} }, { "unhdr_order", parse_unlist, {.p=&HeaderOrderList} }, { "unhook", mutt_parse_unhook, {.l=0} }, { "unignore", parse_unignore, {.l=0} }, { "unlists", parse_unlists, {.l=0} }, { "unmono", mutt_parse_unmono, {.l=0} }, { "unmy_hdr", parse_unmy_hdr, {.l=0} }, { "unscore", mutt_parse_unscore, {.l=0} }, { "unset", parse_set, {.l=MUTT_SET_UNSET} }, { "unsetenv", parse_setenv, {.l=MUTT_SET_UNSET} }, { "unsubscribe", parse_unsubscribe, {.l=0} }, { NULL, NULL, {.l=0} } };